LFR3 to indicate the change in IP subnet to user space (supplicant).
This enables the DHCP refresh in case of IP subnet change during
roaming.
Change-Id: I9842a28461346fe97ab39f5a11ae504f2e32fa16
CRs-Fixed: 876335
Add LFR subnet detection support to protocol stack and
device access layers. In LFR3, the device may perform multiple
roams (may be across multiple IP subnets) without the knowledge
of wlan host. The LFR subnet detection feature enables the device
to regain IP connectivity if the firmware has roamed across the
subnets which otherwise is not possible without disconnect and
reconnect.
Change-Id: I60959af8b6ed330313a7f08f8aa1edfb63938bb8
CRs-Fixed: 876335
At present and going forward ESE and ESE_UPLOAD will be the
de-facto approach of supporting ESE.
There is no support for #ifndef FEATURE_WLAN_ESE_UPLOAD block of code.
Hence clean up this code.
Change-Id: I1e1307ec3430353496b1cf7aaa2eb5291ca1d5b2
CRs-Fixed: 949634
qcacld-2.0 to qcacld-3.0 propagation.
Add new TDLS mode for TDLS external control operation to
achieve power save on the target. Firmware will use this mode
to control timers precisely and save the power.
Add configuration "gTDLSPeerKickoutThreshold" to fine tune
TDLS peer sta kick out operation.
Change-Id: Ie941f93b54983ca6323ef4384a66e0807a56a7b1
CRs-Fixed: 929749
qcacld-2.0 to qcacld-3.0 propagation
If connect is received and queued to sme pending list while scan
is in progress in sme, once scan is completed, again scan is
queued to get the scanned channel info with reason
eCsrScanGetScanChnInfo behind connect command.
Connect is executed next with scan command in pending queue.
Now if disconnect is received from hdd it is also queued in sme
pending cmd list behind scan.
Once connect is executed the wait for key state is set and wait
key timer is started. As only disconnect and set key command are
allowed in wait for key state, the pending cmd queue is not
executed with scan command at the head and thus the disconnect is
not executed. Also as supplicant has issued disconnect, no keys
will be set and pending command queue will not be processed till
wait for key timer expires.
If during this time unload starts all the commands including the
disconnect command sme pending queue are flushed and thus no
DEL BSS is sent to firmware before HAL STOP which leads to crash.
To avoid this add disconnect to the head of sme pending command
list so that disconnect can be processed after connect during
wait for key state.
Change-Id: I333e7b103ac10e368d34b5bf8b87cc360650cd50
CRs-Fixed: 930713
Fix mangled APIs sme_configure_ext_wo_w,
sme_process_ready_to_ext_wo_w and
lim_remove_timeout_pbc_sessions which were introduced
while converting the names programmatically.
Change-Id: Ie0a79b476a99bf1be0411dae0542359e7d58141a
CRs-Fixed: 882962
qcacld-2.0 to qcacld-3.0 propagation
STA gets disconnected with AP IPTIME N904NS when AP is configured
for WPA1 + TKIP on CH 161.
Return value of memcmp function must be checked with NOT operation.
Change-Id: Ic866a70917c1e713855c28a8f156ffe7c381fa07
CRs-Fixed: 642070
qcacld-2.0 to qcacld-3.0 propagation
STA gets disconnected with AP IPTIME N904NS when AP is configured
for WPA1 + TKIP on CH 161.
Change-Id: Ifa30ed624c1f9f3c549def45cdb9e5f8ebfae233
CRs-Fixed: 627650
qcacld-2.0 to qcacld-3.0 propagation
This reverts Change-Id I858cd3cbd536ec189ea808c5d637abffe388f7aa.
With change id I858cd3cbd536ec189ea808c5d637abffe388f7aa,
host is not sending WMI_STA_UAPSD_AUTO_TRIG_CMDID command to firmware
during disable UAPSD per AC.
Change-Id: Ifdbcd6926ca86b1baeeadcf7a4720e460d41a6e5
CRs-Fixed: 911229
qcacld-2.0 to qcacld-3.0 propagation
Currently tpAniSirGlobal pnoOffload value is initialized with
FW caps first time only and resetting to 0 while starting a bss in
go mode. Existing value of pnoOffload is not retained while
getting config for tSmeConfigParams.
Added changes to retain current value of pnoOffload from
tpAniSirGlobal while getting config for new tSmeConfigParams.
Change-Id: I0eda12ec1c69aeca4465d41f3e3ba96b8e1944cb
CRs-Fixed: 913994
qcacld-2.0 to qcacld-3.0 propagation
While processing GET STATES IOCTL, in a while loop, HOST prints PE, LIM
and MLM states of each session. Normally while loading, HOST allocates
memory for five sessions, but while processing this IOCTL, it iterating
in a loop assuming there are 255 sessions allocated, leading to crash
because of invalid memory access.
Hence while printing PE, LIM and MLM states iterate only for allocated
number of sessions.
Change-Id: I29c9a627615a1983d23831578f45aefe116dac25
CRs-Fixed: 879950
qcacld-2.0 to qcacld-3.0 propagation
Add support in driver for a new vendor command to get
the link properties nss, rate flags and operating
frequency.
Change-Id: Ie3b8d5b2c3886055d303441c5d8b2f2a0a2719bd
CRs-Fixed: 834199
qcacld-2.0 to qcacld-3.0 propagation.
Too many log prints are seen if mtrace are dumped and this cause
WD bark.
To avoid this lower the log level of mtrace to Info.
Change-Id: I05d3fa8b3494785a1933f159280b6c9ba6923c0d
CRs-Fixed: 926416
qcacld-2.0 to qcacld-3.0 propagation
Create a configuration item to program the first bucket
threshold of the scan results to have the flexibility to
adjust the first bucket threshold.
CRs-Fixed: 922979
Change-Id: I6fad27a2990f7555173e4735131e8392d0277009
1) Check for bssid if it is NULL, before dereferencing it.
2) Check for hal_ctx if it is NULL, before dereferencing it.
CRs-Fixed: 940721
Change-Id: I836416a4717b15902e8b8f27fa2e5e5e7935c12f
This is qcacld-2.0 to qcacld-3.0 propagation
Currently in SAP mode, if max STA connected a operation to turn off
SAP will result in more than SME queue length cmds being enqueued.
To fix, this patch:
1) Makes the SME cmd queue length, 3 times the max STA.
2) Because of increased SME cmds, the allocation for all cmds
together will fail, hence allocate each SME cmd individually
and free them accordingly.
Change-Id: Ia1dfc5b00eacd9bdb503ce18927c62f1edd15320
CRs-Fixed: 928840
qcacld-2.0 to qcacld-3.0 propagation
1.Provide off channel and operating class info to user space
in HAL API wifi_get_tdls_status. If off channel is not enabled
then provide base channel info and in that case pass opclass as 0.
2.Provide correct tdls state based on tdls off channel
configuration.
Change-Id: Ic60500b95ebddcb88b4e03f29178068c5322b2b9
CRs-Fixed: 838167
This is a qcacld-2.0 to qcacld-3.0 propagation.
1. Add log to print ssid, bssid, rssi, channel and country code
while connecting to an AP.
2. Add log to print disconnect reason when disconnect request is
received from user space.
3. Cleanup some of the logs moving it to appropriate log level
which are showing up as ERROR level in bug report.
Change-Id: Id8ea69a14a18565c226f89a8a5e10be46741d76d
CRs-Fixed: 914336
