Commit Graph

60071 Commits

Author SHA1 Message Date
Matthew Wilcox
80dc3e062a [SCSI] Add Brownie 1200U3P to blacklist
The Brownie 1200U3P has the same problem with REPORT LUNS as the
1600U3P.  Add it to the blacklist.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:58:37 -05:00
Boaz Harrosh
a73e45b3da [SCSI] scsi.c: convert to use the data buffer accessors
- a couple of prints, they can use the accessors

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:57:54 -05:00
Boaz Harrosh
0ab179bcf3 [SCSI] tmscsim: Further clean-up of the driver
- The saved sg_count was a leftover from the time the driver was doing
   dma mapping by himself. But now that scsi-ml is called for the mapping
   it is not the drivers responsibility.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:56:33 -05:00
Geert Uytterhoeven
cde760856c [SCSI] CONFIG_SCSI_FD_8xx no longer exists
CONFIG_SCSI_FD_8xx no longer exists.

Apparently it was renamed to CONFIG_SCSI_SEAGATE, but the Makefile was
not correctly updated.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:55:11 -05:00
Akinobu Mita
da3962fe63 [SCSI] sr: fix error handling in module_init
Sweep registered blkdev when scsi_register_driver has failed.

Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:54:34 -05:00
James Bottomley
a57850379e [SCSI] lpfc: Fix NPIV compile problem
drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_create_port':
drivers/scsi/lpfc/lpfc_init.c:1573: error: 'struct kobject' has no member named 'dentry'

Just remove the if check on this ... lpfc shouldn't be poking around
in kobject structures.

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_pci_probe_one':
drivers/scsi/lpfc/lpfc_init.c:1723: warning: unused variable 'retval'

And remove the unused variable.

Cc: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 18:47:04 -05:00
FUJITA Tomonori
c59fd9ebc4 [SCSI] lpfc: fix NPIV mapping problems
This patch uses dma_map_sg with phba->pcidev->dev instead of
scsi_dma_map.

scsi_dma_map doesn't work for NPIV since fc_vport->dev isn't fully
initialized. check_addr() in arch/x86_64/kernel/pci-nommu.c leads to
the crash since dev->dma_mask is NULL.

For more details:

http://marc.info/?l=linux-scsi&m=118312448030633&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 17:13:02 -05:00
Boaz Harrosh
d4bd4cd063 [SCSI] lpfc: add missed data buffer accessor
This is an addendum to:

 commit a0b4f78f9a
 Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
    [SCSI] lpfc: convert to use the data buffer accessors

One place was missed in the merge

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 17:11:16 -05:00
Priyanka Gupta
d0f656cad3 [SCSI] Remove unused method scsi_device_cancel
Removes an obsolete method scsi_device_cancel which isn't being used
anywhere in the kernel.

Signed-off-by: Priyanka Gupta <priyankag@google.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 16:01:16 -05:00
Eric Van Hensbergen
0af8887ebf 9p: fix a race condition bug in umount which caused a segfault
umounting partitions after heavy activity would sometimes trigger a
segmentation violation.  This fix appears to remove that problem.
Fix originally provided by Latchesar Ionkov.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14 15:14:19 -05:00
Eric Van Hensbergen
9e2f6688c0 9p: re-enable mount time debug option
During reorganization, the mount time debug option was removed in favor
of module-load-time parameters.  However, the mount time option is still
a useful for feature during debug and for user-fault isolation when the
module is compiled into the kernel.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14 15:14:14 -05:00
Eric Van Hensbergen
9523a841b1 9p: cache meta-data when cache=loose
This patch expands the impact of the loose cache mode to allow for cached
metadata increasing the performance of directory listings and other metadata
read operations.

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14 15:14:08 -05:00
Latchesar Ionkov
1d6b560238 net/9p: set error to EREMOTEIO if trans->write returns zero
If trans->write returns 0, p9_write_work goes through the error path, but
sets the error code to zero.

This patch sets the error code to EREMOTEIO if trans->write returns zero
value.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2007-07-14 15:14:01 -05:00
Latchesar Ionkov
e46662be7f net/9p: change net/9p module name to 9pnet
Change module name of net/9p module from 9p.ko to 9pnet.ko. fs/9p module
already uses 9p.ko name.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2007-07-14 15:13:50 -05:00
Latchesar Ionkov
bd238fb431 9p: Reorganization of 9p file system code
This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p.
It moves the transport, packet marshalling and connection layers to net/9p
leaving only the VFS related files in fs/9p.  This work is being done in
preparation for in-kernel 9p servers as well as alternate 9p clients (other
than VFS).

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14 15:13:40 -05:00
David Chinner
0f1145cc18 [XFS] Fix lockdep annotations for xfs_lock_inodes
SGI-PV: 967035
SGI-Modid: xfs-linux-melb:xfs-kern:29026a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 18:09:42 +10:00
David Chinner
d7f0923d83 [LIB]: export radix_tree_preload()
XFS filestreams functionality uses radix trees and the preload
functions. XFS can be built as a module and hence we need
radix_tree_preload() exported. radix_tree_preload_end() is a
static inline, so it doesn't need exporting.

Signed-Off-By: Dave Chinner <dgc@sgi.com>
Signed-Off-By: Tim Shimmin <tes@sgi.com>
2007-07-14 16:05:04 +10:00
Michal Marek
faa63e9584 [XFS] Fix XFS_IOC_FSBULKSTAT{,_SINGLE} & XFS_IOC_FSINUMBERS in compat mode
* 32bit struct xfs_fsop_bulkreq has different size and layout of
members, no matter the alignment. Move the code out of the #else
branch (why was it there in the first place?). Define _32 variants of
the ioctl constants.
* 32bit struct xfs_bstat is different because of time_t and on
i386 because of different padding. Make xfs_bulkstat_one() accept a
custom "output formatter" in the private_data argument which takes care
of the xfs_bulkstat_one_compat() that takes care of the different
layout in the compat case.
* i386 struct xfs_inogrp has different padding.
Add a similar "output formatter" mecanism to xfs_inumbers().

SGI-PV: 967354
SGI-Modid: xfs-linux-melb:xfs-kern:29102a

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:42:50 +10:00
Michal Marek
1fa503df66 [XFS] Compat ioctl handler for handle operations
32bit struct xfs_fsop_handlereq has different size and offsets (due to
pointers). TODO: case XFS_IOC_{FSSETDM,ATTRLIST,ATTRMULTI}_BY_HANDLE still
not handled.

SGI-PV: 967354
SGI-Modid: xfs-linux-melb:xfs-kern:29101a

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:41:49 +10:00
Michal Marek
547e00c3c6 [XFS] Compat ioctl handler for XFS_IOC_FSGEOMETRY_V1.
i386 struct xfs_fsop_geom_v1 has no padding after the last member, so the
size is different.

SGI-PV: 967354
SGI-Modid: xfs-linux-melb:xfs-kern:29100a

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:41:39 +10:00
Eric Sandeen
3a59c94c4b [XFS] Clean up function name handling in tracing code
Remove the hardcoded "fnames" for tracing, and just embed them in tracing
macros via __FUNCTION__. Kills a lot of #ifdefs too.

SGI-PV: 967353
SGI-Modid: xfs-linux-melb:xfs-kern:29099a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:41:24 +10:00
David Chinner
b11f94d537 [XFS] Quota inode has no parent.
Avoid using a special "zero inode" as the parent of the quota inode as
this can confuse the filestreams code into thinking the quota inode has a
parent. We do not want the quota inode to follow filestreams allocation
rules, so pass a NULL as the parent inode and detect this condition when
doing stream associations.

SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29098a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:41:12 +10:00
David Chinner
2a82b8be8a [XFS] Concurrent Multi-File Data Streams
In media spaces, video is often stored in a frame-per-file format. When
dealing with uncompressed realtime HD video streams in this format, it is
crucial that files do not get fragmented and that multiple files a placed
contiguously on disk.

When multiple streams are being ingested and played out at the same time,
it is critical that the filesystem does not cross the streams and
interleave them together as this creates seek and readahead cache miss
latency and prevents both ingest and playout from meeting frame rate
targets.

This patch set creates a "stream of files" concept into the allocator to
place all the data from a single stream contiguously on disk so that RAID
array readahead can be used effectively. Each additional stream gets
placed in different allocation groups within the filesystem, thereby
ensuring that we don't cross any streams. When an AG fills up, we select a
new AG for the stream that is not in use.

The core of the functionality is the stream tracking - each inode that we
create in a directory needs to be associated with the directories' stream.
Hence every time we create a file, we look up the directories' stream
object and associate the new file with that object.

Once we have a stream object for a file, we use the AG that the stream
object point to for allocations. If we can't allocate in that AG (e.g. it
is full) we move the entire stream to another AG. Other inodes in the same
stream are moved to the new AG on their next allocation (i.e. lazy
update).

Stream objects are kept in a cache and hold a reference on the inode.
Hence the inode cannot be reclaimed while there is an outstanding stream
reference. This means that on unlink we need to remove the stream
association and we also need to flush all the associations on certain
events that want to reclaim all unreferenced inodes (e.g. filesystem
freeze).

SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29096a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-14 15:40:53 +10:00
Andrew Morton
0892ccd6fe [XFS] Use uninitialized_var macro to stop warning about rtx
Appease gcc in regards to "warning: 'rtx' is used uninitialized in
this function".

SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:29007a

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:40:02 +10:00
Christoph Hellwig
fbf3ce8d8e [XFS] XFS should not be looking at filp reference counts
A check for file_count is always a bad idea. Linux has the ->release
method to deal with cleanups on last close and ->flush is only for the
very rare case where we want to perform an operation on every drop of a
reference to a file struct.

This patch gets rid of vop_close and surrounding code in favour of simply
doing the page flushing from ->release.

SGI-PV: 966562
SGI-Modid: xfs-linux-melb:xfs-kern:28952a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:37:37 +10:00
Vignesh Babu
16a087d8e1 [XFS] Use is_power_of_2 instead of open coding checks
SGI-PV: 966576
SGI-Modid: xfs-linux-melb:xfs-kern:28950a

Signed-off-by: Vignesh Babu <vignesh.babu@wipro.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:37:12 +10:00
Christoph Hellwig
bbaaf53808 [XFS] Reduce shouting by removing unnecessary macros from dir2 code.
SGI-PV: 966505
SGI-Modid: xfs-linux-melb:xfs-kern:28947a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:37:02 +10:00
David Chinner
54aa8e26e9 [XFS] Simplify XFS min/max macros.
SGI-PV: 964547
SGI-Modid: xfs-linux-melb:xfs-kern:28945a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nscott@aconex.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:36:53 +10:00
Eric Sandeen
24ad33ff71 [XFS] Kill off xfs_count_bits
xfs_count_bits is only called once, and is then compared to 0. IOW, what
it really wants to know is, is the bitmap empty. This can be done more
simply, certainly.

SGI-PV: 966503
SGI-Modid: xfs-linux-melb:xfs-kern:28944a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:36:43 +10:00
Jesper Juhl
87ae3c2411 [XFS] Cancel transactions on xfs_itruncate_start error.
SGI-PV: 966502
SGI-Modid: xfs-linux-melb:xfs-kern:28943a

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:36:17 +10:00
Christoph Hellwig
39726be2a2 [XFS] Use do_div() on 64 bit types.
SGI-PV: 966145
SGI-Modid: xfs-linux-melb:xfs-kern:28889a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:36:08 +10:00
David Chinner
516b2e7c26 [XFS] Fix remount,readonly path to flush everything correctly.
The remount readonly path can fail to writeback properly because we still
have active transactions after calling xfs_quiesce_fs(). Further
investigation shows that this path is broken in the same ways that the xfs
freeze path was broken so fix it the same way.

SGI-PV: 964464
SGI-Modid: xfs-linux-melb:xfs-kern:28869a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:35:58 +10:00
David Chinner
957d0ebed0 [XFS] Cleanup inode extent size hint extraction
SGI-PV: 966004
SGI-Modid: xfs-linux-melb:xfs-kern:28866a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:35:36 +10:00
David Chinner
84e1e99f11 [XFS] Prevent ENOSPC from aborting transactions that need to succeed
During delayed allocation extent conversion or unwritten extent
conversion, we need to reserve some blocks for transactions reservations.
We need to reserve these blocks in case a btree split occurs and we need
to allocate some blocks.

Unfortunately, we've only ever reserved the number of data blocks we are
allocating, so in both the unwritten and delalloc case we can get ENOSPC
to the transaction reservation. This is bad because in both cases we
cannot report the failure to the writing application.

The fix is two-fold:

1 - leverage the reserved block infrastructure XFS already
has to reserve a small pool of blocks by default to allow
specially marked transactions to dip into when we are at
ENOSPC.
Default setting is min(5%, 1024 blocks).

2 - convert critical transaction reservations to be allowed
to dip into this pool. Spots changed are delalloc
conversion, unwritten extent conversion and growing a
filesystem at ENOSPC.
This also allows growing the filesytsem to succeed at ENOSPC.

SGI-PV: 964468
SGI-Modid: xfs-linux-melb:xfs-kern:28865a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:35:19 +10:00
David Chinner
641c56fbfe [XFS] Prevent deadlock when flushing inodes on unmount
When we are unmounting the filesystem, we flush all the inodes to disk.
Unfortunately, if we have an inode cluster that has just been freed and
marked stale sitting in an incore log buffer (i.e. hasn't been flushed to
disk), it will be holding all the flush locks on the inodes in that
cluster.

xfs_iflush_all() which is called during unmount walks all the inodes
trying to reclaim them, and it doing so calls xfs_finish_reclaim() on each
inode. If the inode is dirty, if grabs the flush lock and flushes it.
Unfortunately, find dirty inodes that already have their flush lock held
and so we sleep.

At this point in the unmount process, we are running single-threaded.
There is nothing more that can push on the log to force the transaction
holding the inode flush locks to disk and hence we deadlock.

The fix is to issue a log force before flushing the inodes on unmount so
that all the flush locks will be released before we start flushing the
inodes.

SGI-PV: 964538
SGI-Modid: xfs-linux-melb:xfs-kern:28862a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:33:38 +10:00
Tim Shimmin
0164af51ce [XFS] Log the agf_length change in xfs_growfs_data_private().
SGI-PV: 963528
SGI-Modid: xfs-linux-melb:xfs-kern:28856a

Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2007-07-14 15:32:59 +10:00
David Chinner
effd120edb [XFS] Map unwritten extents correctly for I/o completion processing
If we have multiple unwritten extents within a single page, we fail to
tell the I/o completion construction handlers we need a new handle for the
second and subsequent blocks in the page. While we still issue the I/O
correctly, we do not have the correct ranges recorded in the ioend
structures and hence when we go to convert the unwritten extents we screw
it up.

Make sure we start a new ioend every time the mapping changes so that we
convert the correct ranges on I/O completion.

SGI-PV: 964647
SGI-Modid: xfs-linux-melb:xfs-kern:28797a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:32:49 +10:00
David Chinner
45c3414112 [XFS] Apply transaction delta counts atomically to incore counters
With the per-cpu superblock counters, batch updates are no longer atomic
across the entire batch of changes. This is not an issue if each
individual change in the batch is applied atomically. Unfortunately, free
block count changes are not applied atomically, and they are applied in a
manner guaranteed to cause problems.

Essentially, the free block count reservation that the transaction took
initially is returned to the in core counters before a second delta takes
away what is used. because these two operations are not atomic, we can
race with another thread that can use the returned transaction reservation
before the transaction takes the space away again and we can then get
ENOSPC being reported in a spot where we don't have an ENOSPC condition,
nor should we ever see one there.

Fix it up by rolling the two deltas into the one so it can be applied
safely (i.e. atomically) to the incore counters.

SGI-PV: 964465
SGI-Modid: xfs-linux-melb:xfs-kern:28796a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:32:09 +10:00
David Chinner
b2826136a1 [XFS] Handle null returned from xfs_vtoi() in xfs_setfilesize().
SGI-PV: 965636
SGI-Modid: xfs-linux-melb:xfs-kern:28777a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Olaf Weber <olaf@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:31:03 +10:00
David Chinner
e927af90aa [XFS] Block on unwritten extent conversion during synchronous direct I/O.
Currently we do not wait on extent conversion to occur, and hence we can
return to userspace from a synchronous direct I/O write without having
completed all the actions in the write. Hence a read after the write may
see zeroes (unwritten extent) rather than the data that was written.

Block the I/O completion by triggering a synchronous workqueue flush to
ensure that the conversion has occurred before we return to userspace.

SGI-PV: 964092
SGI-Modid: xfs-linux-melb:xfs-kern:28775a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:30:52 +10:00
David Chinner
f4a9f28a90 [XFS] Flush the block device before closing it on unmount.
SGI-PV: 965630
SGI-Modid: xfs-linux-melb:xfs-kern:28774a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:30:05 +10:00
David Chinner
4e5ae8386b [XFS] xfs_bmapi fails to update the previous extent pointer
When processing multiple extent maps, xfs_bmapi needs to keep track of the
extent behind the one it is currently working on to be able to trim extent
ranges correctly. Failing to update the previous pointer can result in
corrupted extent lists in memory and this will result in panics or assert
failures.

Update the previous pointer correctly when we move to the next extent to
process.

SGI-PV: 965631
SGI-Modid: xfs-linux-melb:xfs-kern:28773a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:29:37 +10:00
David Chinner
210c6f1caa [XFS] Fix the transaction flags to make lazy superblock counters work.
SGI-PV: 964999
SGI-Modid: xfs-linux-melb:xfs-kern:28653a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:29:02 +10:00
David Chinner
92821e2ba4 [XFS] Lazy Superblock Counters
When we have a couple of hundred transactions on the fly at once, they all
typically modify the on disk superblock in some way.
create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify
free block counts.

When these counts are modified in a transaction, they must eventually lock
the superblock buffer and apply the mods. The buffer then remains locked
until the transaction is committed into the incore log buffer. The result
of this is that with enough transactions on the fly the incore superblock
buffer becomes a bottleneck.

The result of contention on the incore superblock buffer is that
transaction rates fall - the more pressure that is put on the superblock
buffer, the slower things go.

The key to removing the contention is to not require the superblock fields
in question to be locked. We do that by not marking the superblock dirty
in the transaction. IOWs, we modify the incore superblock but do not
modify the cached superblock buffer. In short, we do not log superblock
modifications to critical fields in the superblock on every transaction.
In fact we only do it just before we write the superblock to disk every
sync period or just before unmount.

This creates an interesting problem - if we don't log or write out the
fields in every transaction, then how do the values get recovered after a
crash? the answer is simple - we keep enough duplicate, logged information
in other structures that we can reconstruct the correct count after log
recovery has been performed.

It is the AGF and AGI structures that contain the duplicate information;
after recovery, we walk every AGI and AGF and sum their individual
counters to get the correct value, and we do a transaction into the log to
correct them. An optimisation of this is that if we have a clean unmount
record, we know the value in the superblock is correct, so we can avoid
the summation walk under normal conditions and so mount/recovery times do
not change under normal operation.

One wrinkle that was discovered during development was that the blocks
used in the freespace btrees are never accounted for in the AGF counters.
This was once a valid optimisation to make; when the filesystem is full,
the free space btrees are empty and consume no space. Hence when it
matters, the "accounting" is correct. But that means the when we do the
AGF summations, we would not have a correct count and xfs_check would
complain. Hence a new counter was added to track the number of blocks used
by the free space btrees. This is an *on-disk format change*.

As a result of this, lazy superblock counters are a mkfs option and at the
moment on linux there is no way to convert an old filesystem. This is
possible - xfs_db can be used to twiddle the right bits and then
xfs_repair will do the format conversion for you. Similarly, you can
convert backwards as well. At some point we'll add functionality to
xfs_admin to do the bit twiddling easily....

SGI-PV: 964999
SGI-Modid: xfs-linux-melb:xfs-kern:28652a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:28:50 +10:00
Andrew Morton
3260f78ad6 [XFS] Use generic shrinker interfaces in XFS.
SGI-PV: 964986
SGI-Modid: xfs-linux-melb:xfs-kern:28642a

Signed-Off-By: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:23:53 +10:00
David Chinner
92dfe8d266 [XFS] Make hole punching at EOF atomic.
If hole punching at EOF is done as two steps (i.e. truncate then extend)
the file is in a transient state between the two steps where an
application can see the incorrect file size. Punching a hole to EOF needs
to be treated in teh same way as all other hole punching cases so that the
file size is never seen to change.

SGI-PV: 962012
SGI-Modid: xfs-linux-melb:xfs-kern:28641a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:23:40 +10:00
David Chinner
511105b3d7 [XFS] Fix vmalloc leak on mount/unmount.
When setting the length of the iclogbuf to write out we should just be
changing the desired byte count rather completely reassociating the buffer
memory with the buffer. Reassociating the buffer memory changes the
apparent length of the buffer and hence when we free the buffer, we don't
free all the vmap()d space we originally allocated.

SGI-PV: 964983
SGI-Modid: xfs-linux-melb:xfs-kern:28640a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:23:23 +10:00
Christoph Hellwig
ca165b8892 [XFS] Fix double free in xfs_buf_get_noaddr error handling path
SGI-PV: 964983
SGI-Modid: xfs-linux-melb:xfs-kern:28639a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:22:50 +10:00
David Chinner
3db296f341 [XFS] Fix use-after-free during log unmount.
Don't reference the log buffer after running the callbacks as the callback
can trigger the log buffers to be freed during unmount.

SGI-PV: 964545
SGI-Modid: xfs-linux-melb:xfs-kern:28567a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:22:34 +10:00
David Chinner
40095b64f5 [XFS] Sleeping with the ilock waiting for I/O completion is Bad.
Recent fixes to the filesystem freezing code introduced a vn_iowait call
in the middle of the sync code. Unfortunately, at the point where this
call was added we are holding the ilock. The ilock is needed by I/O
completion for unwritten extent conversion and now updating the file size.
Hence I/o cannot complete if we hold the ilock while waiting for I/O
completion.

Fix up the bug and clean the code up around it.

SGI-PV: 963674
SGI-Modid: xfs-linux-melb:xfs-kern:28566a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 15:22:18 +10:00