Handle error condition of vdev not found (Logical delete
state), and scan req memory not allocated to prevent mem
leak for SAP ACS channel list.
Change-Id: I0ab00c0119f80299cc8d93236839e42c647b939f
CRs-Fixed: 2547058
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As part of above requirement add logic to process rx mgmt
packets based on the frequencies instead of channel numbers.
Change-Id: Ib063070738ecdb4f83379eafe50629778a490aae
CRs-fixed: 2522693
Currently, the SAP peers are not cleared after an SSR in shutdown path
inside hdd_reset_all_adapters. This can lead to mem leak in the case
the device undergoes SSR with connected SAP clients.
To prevent this memleak, rectify the existing check to include SAP
mode also while cleaning up the registered peers.
Change-Id: I8faf54d420cd9198e257a3d93bbf1b37da2f3eb8
CRs-Fixed: 2546805
In WPA3 roam hybrid model, the SAE exchange/4-way handshake is
offloaded to the wpa_supplicant. After roam candidate selection,
firmware will send WMI_ROAM_PREAUTH_START_EVENTID to send SAE
authentication frame with the selected candidate. If the host
is in suspended state, then SAE preauthentication could fail.
So wakeup the host when WMI_ROAM_PREAUTH_START_EVENTID event is
received to carry out the SAE authentication with the provided
candidate
Change-Id: I7a89234e90e7fccef58ec3822dc0cda3740bad20
CRs-Fixed: 2512871
Invalid peer keeps sending rx ind which triggers sending of
deauth mgmt frame continiously.
Fix is to add flow control in wma_rx_invalid_peer_ind()
to limit per peer deauth mgmt frame to one.
Change-Id: Icfbcb9452ee9890a26945b3cdd0c0ab07649367a
CRs-Fixed: 2538222
Currently if there are 3 connections in MCC on same
MAC, FW asserts.
If there are several bssid for same ssid and channel id from wpa
supplicant is 0, driver will sort candidate AP and try one by
one, vdev start channel isn't decided until candidate is
selected, need do concurrency allow check at that time, or lead
to 3 connections on the same MAC.
STA+STA MCC on same MAC has no benefit, total throughput is even
lower than single STA for channel switch frequently on same MAC.
so add check to disallow STA+STA MCC.
Change-Id: Id286096ea156915432807e42983c68cc83a8b42e
CRs-Fixed: 2545411
The revert Change-Id: I1f3819fa093766abba87e5dc6dc44e6d2188740b
Inlucde the ol_rx_reorder.c for LL solution to avoid NULL pointer access
when handling the fragmentation frames.
Change-Id: I5182693437b00d4c8a932beb59fd03adea5ee8a1
CRs-Fixed: 2546353
Currently the MCS9 rates are not populated correctly in the host stored
MCS tables. The current rates entered are (1560, 1733) which is incorrect.
Since MCS9 is not defined in the spec but rather an internal
implementation, rectify the rates by confirmation from firmware team.
The new rates entered are (1730, 1920)
Change-Id: Idebc3afae8b1f251ea843b6578170e74f7152629
CRs-Fixed: 2517704
Advertise the Rx AMSDU in AMPDU support in addba response only
for 11ax connection when the connection is in 2.4G.
Change-Id: I3275f472503bc420b906f947b661490c3a52b670
CRs-Fixed: 2538118
The function wma_wake_event_piggybacked gets the pointer to pdev object
by calling cds_get_context with the respective module ID. This pdev
pointer is then passed on down the stack to CDP APIs where there are no
explicit NULL check to validate the same. In the case the pdev is NULL,
this can go on to cause a NULL pointer dereference.
Add a validation check on the PDEV pointer to avoid this.
Change-Id: Ifecd6853445c6df5e16e6310beb2bf7cbc6997a0
CRs-Fixed: 2524604
If supplicant disabled roaming, driver does not send RSO cmd to
fw. This causes roam invoke to fail in FW since RSO start never
happened at least once to configure roaming engine in FW.
So when supplicant disabled roaming on a vdev, send RSO start on
the vdev and then follow it with RSO stop command.
So when supplicant disabled roaming, disable the firmware
roam scans alone and allow roam invoke.
Change-Id: Ic3def72c6b60c42269d99e6db30cf3bfd1988d70
CRs-Fixed: 2543865
In function hdd_association_completion_handler, there are couple of
large stack allocated arrays defined. This leads to issues of stack
overflow in cases when the stack across the call stack exceeds limit.
Dynamically allocate and deallocate the variables to ensure that they
take no space in the stack.
Change-Id: Ia077e44d7458f160581e3e75564a77d25d20311a
CRs-Fixed: 2515106
cdp_fc_get_tx_resource API is being called without passing
pdev handle, which mis-matches the prototype. Adding a fix
to include right arguments to passed, also removing static
from function ol_txrx_get_vdev_by_peer_addr to expose scope
outside the file, to fix compile errors.
Change-Id: I8089aa5df3a127b85236e69f8a84de7ebd09ec3f
CRs-Fixed: 2545857
Currently, Host does not update value of max_num_probes and
roam_scan_home_away_time as per default value of INI. This
could leads to only one probe request being sent out during
roam scans which might reduce probability of finding candidates
on a particular channel.
Fix is to update value of max_num_probes and
roam_scan_home_away_time as per INI.
Change-Id: I2aaa302cec840967443dfbfb7ea93f2b5f2380cb
CRs-Fixed: 2545070
Make HTC_MAX_MSG_PER_BUNDLE_TX configurable through config files.
Also set HTC_MAX_MSG_PER_BUNDLE_TX to 48 for QCN7605 usb.
Change-Id: If6616251f536c35db087d5623a81c8a3f02da725
CRs-Fixed: 2544743
Add action_oui ini gActionOUIDisableAggressiveEDCA to identify peers for
which aggressive EDCA configuration causes some IOT issues.
Change-Id: Ifea0c224cef2378727c9f78d8b571ea9c57bb662
CRs-Fixed: 2507191
