Add check to determine if dinput_mux is set by any of patch_stac*() functions,
otherwise a invalid pointer my be referenced causing gibberish to mixer values.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The capture with 44.1kHz on ca0106 seems to cause loud noises on
later playbacks, which doesn't support 44.1kHz. A simple fix is to
disable 44.1kHz, as the "default" PCM with dsnoop is anyway only with
48kHz.
Reference: Novell bnc#447624
https://bugzilla.novell.com/show_bug.cgi?id=447624
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When no jack detection is available, the pins should be always
turned on since it can't be turned on/off dynamically via unsol
events.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added probe_only module option to hd-audio driver.
This option specifies whether the driver creates and initializes the
codec-parser after probing. When this option is set, the driver skips
the codec parsing and initialization but gives you proc and other
accesses. It's useful to see the initial codec state for debugging.
The default of this value is off, so the default behavior is as same
as before.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the line_out has only one DAC and it's unique (i.e. not shared
by other outputs), assign a more reasonable and distinct mixer name
such as "Headphone" or "Speaker".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current auto-configuration code has several problems especially
for the new IDT codecs, e.g. wrong assignment of pins and DACs or
coupled volume for speaker and headphone.
This patch is a fairly large rewrite of the auto-configuration code.
Some remaks
- mic_switch and line_switch contain NIDs instead of bool
- dac_list isn't fixed for IDT 92HD* codecs now, they are all probed
- extra HP and speakers are stored in extra_dacs[].
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit re-enabled hp_nid setup for IDT92HD73*, but
it's unneeded indeed for Dell laptops that have multiple headphones.
Setting the extra hp_nid results in a non-working "Headpohne" mixer
control. Thus hp_nid should be 0 for these dell models.
Also, the automatic addition of hp_nid should check whether it's
a dual-HP model or not. For dual-HPs, the pins are already checked
by the early workaround.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added "IEC958 PCM Stream" controls for the per-stream IEC958 status
bits. Using this instead of "IEC958 Default" is safer since the status
bits will be recovered to the default states after closing the PCM
stream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the call of snd_ctl_add() by replacing with snd_hda_ctl_add()
so that this mixer element can be tracked for re-configuration.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The re-initializations of codec amp and verb caches are missing
at reconfig, which may cause Oops occasionally.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added the model without the jack-detection for some desktops that
have really no jack-detection. The recent driver caused regressions
regarding the sound output on such machines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 07f455f779.
ALSA: hda: removed unneeded hp_nid references
Removed unneeded hp_nid references for 92hd73xx codec family.
This caused the silent output on some Intel desktops due to missing
routing of widget 0x0a and 0x0d.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule(). The former often causes troubles with
RT-kernels, and has actually no merit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove codec vendor names from the codec name strings.
The vendor name is already given from the vendor name table, so
displayed doubly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some desktops seems to have no HP/mic jack detection on the front panel,
which results in the silent output in the recent driver, because the
driver mutes the output (to save power) when no plug is detected.
This patch adds a new model that disables the jack-detection.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes an inconsistency that became apparent when I
documented the fields of snd_ca0106_details. spi_dac is always
used in a 'boolean' sense, so this cleanup should make no difference.
[Actually, there is one place checking explicitly spi_dac == 1, so
this will change the behavior. But, supposing it's rather a typo,
I apply this clean-up patch -- tiwai]
Signed-off-by: Ben Stanley <Ben.Stanley@exemail.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi wrote an email [1] explaining the fields of snd_ca0106_details,
so I captured the information into the ca0106.h header file.
[1] http://article.gmane.org/gmane.linux.alsa.devel/56783/match=takashi+gpio_type
Signed-off-by: Ben Stanley <Ben.Stanley@exemail.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the compile warning regarding the unused function when built
with CONFIG_PM=n:
sound/pci/hda/hda_intel.c:1905: warning: ‘snd_hda_codecs_inuse’ defined but not used
snd_hda_codecs_inuse() is used only in the resume callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GPIO stuff for OLPC in cs5535audio_olpc.c is implemented only for
Geode-LX, and enabled only when CONFIG_MGEODE_LX=y. Without this
config option, the driver gets build errors.
This patch adds a workaround to make it dependent on CONFIG_MGEODE_LX.
Ideally, the OLPC-GPIO stuff should be implemented in a way
independent from CPU type selection...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- add copyright info to _olpc.c
- minor layout fixes
- make Makefile more concise
- silence a warning
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Always turn off mic bias; the MIC LED should never come on when the
driver is first loaded.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This drops the AD1888 V_REFOUT control, and replaces it with a MIC Bias
Enable control. It also moves the MIC bias enabling into a separate
function.
Signed-off-by: Andres Salomon <dilinger@debian.org>
The OLPC has a privacy light hooked up in series with the microphone's
V_Ref bias. We want to activate the bias while we are capturing audio.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Checking the HPF register is irrelevant; HPF is secondary to the AI mode.
Instead, check for Analog Input mode via GPIO.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously, we had two separate controls; there's no need to have AD1888's
HPF control, so drop it if we're on an OLPC machine. Also, as per Arjun's
request, rename OLPC's Analog Input Switch control to "DC Mode Enable".
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We shouldn't be touching V_REFOUT when we toggle HPF/analog input, so just
drop that code.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix an audible pop described in <http://dev.laptop.org/ticket/977>. Originally
based upon fixes by Mitch Bradley and Chris Ball.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Use basic infrastructure code; geode_gpio* (rather than indexed i/o
EC access), and do an OLPC machine check in olpc_quirk.
[dilinger@debian.org: don't return failure in olpc_quirks if !OLPC]
[dilinger@debian.org: drop the <B2 workarounds; those machines are EOL'd]
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
This is a 2nd cut at adding support for OLPC analog input.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
snd_cs5535audio_suspend and snd_cs5535audio_resume are only defined when
CONFIG_PM is set; make that clear in the header file.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As per <http://dev.laptop.org/ticket/1420>, we need to properly turn off
the PCM if we're closing the device in order to save power. This also
causes the MIC led to turn off properly.
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We'd like to use the High Pass Filter and V_REFOUT bitshift values elsewhere,
so stick them into a ac97_codec.h.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The return value of pci_enable_device() must be checked even in resume
callback:
sound/pci/ca0106/ca0106_main.c:1779: warning: ignoring return value of ‘pci_enable_device’, declared with attribute warn_unused_result
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the restoration of the standard PCI configuration registers
in the snd_hda_intel driver to a ->resume_early() callback executed
with interrupts disabled, since doing that with interrupts enabled
may lead to problems in some cases.
This patch addresses the regression from 2.6.26 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12121 .
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code overrides the event type on input pins always to
PWR_EVENT. Although this still works (PWR_EVENT and INSERT_EVENT
are handled samely), it'd be better to avoid such overrides.
Also, currently the unsol events are registered even for fixed pins
which will never raise the pin-detection event.
This patch fixes both issues.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pin-detection function used in patch_sigmatel.c shouldn't be specific
to HP pin because it's used for input pins in general, too.
This patch fixes the detection function, removes the HP check from it
and moves to stac92xx_hp_detect().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reduce the command timeout to 0.5sec. Should be enough to allow a
working command interface but removes a RCU stall and slow resume on
some revisions where the AC97 revision detection stalls in resume.
Signed-off-by: Peter Gruber <nokos@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to the conversion (drop) from 24bit in the DSP to 16bit in AC97,
the maximum capture level on Audigy seems lower than it could be.
This patch adds a workaround to enable the artificial capture boost
switch. When this switch is on, the whole analog capature level is
boost up. However, this results in the lower capture resolution.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WM9715 is software compatible with the WM9711 and WM9712.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- compatibility issue : change firmware filenames
the pcxhr driver version <= 1.0.18a does not work
with new firmware > 1.0.17. Keep the old firmware files
and add new firmware files with different names
Signed-off-by: Markus Bollinger <bollinger@digigram.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The power-state changes in patch_sigmatel.c are accessed via *_cached()
but they shouldn't be really cached. Fixed to the normal write.
Also, stac92hd71xx_suspend and resume are no longer necessary as the
power-state changes are handled properly in the common routine.
Removed these hacks now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The amp switch of SPDIF outputs have to be cached in the amp cache
instead of codec cache. Otherwise it conflicts with the IEC958
playback switch control in hda_codec.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gateway notebooks have their ID inside codec vendor ID, not at PCI ID. Due to
that, model auto-detection were not possible with the standard seek method.
This is what is found at lspci -vnn:
00:14.2 Audio device [0403]: ATI Technologies Inc SB450 HDA Audio [1002:437b] (rev 01)
Subsystem: ATI Technologies Inc SB450 HDA Audio [1002:437b]
Yet, autodetection is possible, since the codec properly reflects the vendor at
the Subsystem ID:
$ cat /proc/asound/card0/codec#0 |head -4
Codec: SigmaTel STAC9250
Address: 0
Vendor Id: 0x83847634
Subsystem Id: 0x107b0367
This patch adds a new autodetection function that seeks for codec subsystem ID.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The global functions in hda_codec.c and other core parts are only
for HD-audio codec and controller drivers. When the HD-audio driver
is built in kernel, all stuff have to be statically linked, thus
we don't need any exports.
This patch introduces a conditional macro to do export only
when needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added a hook for proc outputs of codec-specific stuff.
Moved realtek-specific coeff output into patch_realtek.c as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Moved power_save field initialization inside a proper ifdef
to fix a build error without CONFIG_SND_HDA_POWER_SAVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split the monolithc HD-audio driver into several pieces:
- snd-hda-intel HD-audio PCI controller driver; loaded via udev
- snd-hda-codec HD-audio codec bus driver
- snd-hda-codec-* Specific HD-audio codec drivers
When built as modules, snd-hda-codec (that is invoked by snd-hda-intel)
looks up the codec vendor ID and loads the corresponding codec module
automatically via request_module().
When built in a kernel, each codec drivers are statically hooked up
before probing the PCI.
This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module
information for each driver, and driver-linking codes between
codec-bus and codec drivers.
TODO:
- Avoid EXPORT_SYMBOL*() when built-in kernel
- Restore __devinit appropriately depending on the condition
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function snd_mixart_create creates a link between mgr and card that
allows snd_mixart_free to free card as well. But if snd_mixart_create
fails, then the link has not been created and card has to be freed explicitly.
The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S,S1;
position p1,p2,p3;
expression E,E1;
type T,T1;
expression *ptr != NULL;
@@
(
if ((x@p1 = snd_card_new(...)) == NULL) S
|
x@p1 = snd_card_new(...);
)
... when != snd_card_free(...,(T)x,...)
when != if (...) { <+... snd_card_free(...,(T)x,...) ...+> }
when != true x == NULL || ...
when != x = E
when != E = (T)x
when any
(
if (x == NULL || ...) S1
|
if@p2 (...) {
... when != snd_card_free(...,(T1)x,...)
when != if (...) { <+... snd_card_free(...,(T1)x,...) ...+> }
when != x = E1
when != E1 = (T1)x
(
return \(0\|<+...x...+>\|ptr\);
|
return@p3 ...;
)
}
)
@ script:python @
p1 << r.p1;
p3 << r.p3;
@@
print "* file: %s snd_card_new: %s return: %s" % (p1[0].file,p1[0].line,p3[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The reconfiguration of PCM affected all PCM streams on the bus, but
this this should be done rather only for the target codec.
This patch does the following:
- introduce bitmap indicating the PCM device usages on a hda_bus
- refactor the PCM build functions
- fix __devinit prefix in some fucntions
- add a proper ifdef around HDA-reconfig-specific functions
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move power_save option into hda_intel.c, and make a field in hda_bus,
instead of keeping module parameters in separate files.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor clean ups: move snd_hda_codecs_inuse() into hda_intel.c and
make static. Also, make snd_hda_query_supported_pcm() static
as it's used only in hda_codec.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no argument named @state in snd_hda_resume,
remove its' comment.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
