Commit Graph

21 Commits

Author SHA1 Message Date
Mike Isely
65bd80fe18 V4L/DVB (6700): pvrusb2: Soften the crashed encoder warning message
The pvrusb2 driver has been successfully recovering from a crashed
encoder now for over 2 years.  I think it's time to reduce the
perceived severity of the warning message.  While I'd still very much
like to stop these crashes, the recovery logic is solid enough that
the problem is effectively benign.  No point in panicing the users
over it.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:05 -02:00
Mike Isely
989eb154ea V4L/DVB (6692): pvrusb2: Centralize device specific attributes into a single place
The pvrusb2 driver currently supports two variants of the Hauppauge
PVR USB2.  However there are other hardware types potentially
supportable, but the driver at the moment is not structured to make it
easy to describe these minor variations.  This changeset is the first
set of changes to make such additional device support possible.
Device attributes are held in several tables all contained within
pvrusb2-devattr.c; all other device-specific driver behavior now
derives from these tables.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:02 -02:00
Mike Isely
681c739944 V4L/DVB (6691): pvrusb2: Rework pipeline state control
This is a new implementation for video pipeline control within the
pvrusb2 driver.  Actual start/stop of the pipeline is moved to the
driver's kernel thread.  Pipeline stages are controlled autonomously
based on surrounding pipeline or application control state.  Kernel
thread management is also cleaned up and moved into the internal
control structure of the driver, solving a set up / tear down race
along the way.  Better failure recovery is implemented with this new
control strategy.  Also with this change comes better control of the
cx23416 encoder, building on additional information learned about the
peculiarities of controlling this part (this information was the
original trigger for this rework).  With this change, overall encoder
stability should be considerably improved.  Yes, this is a large
change for this driver, but due to the nature of the feature being
worked on, the changes are fairly pervasive and would be difficult to
break into smaller pieces with any semblence of step-wise stability.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:03:01 -02:00
Mike Isely
9a607f01b0 V4L/DVB (6357): pvrusb2: Improve encoder chip health tracking
This is a minor change to help with tracking the viability of the
encoder chip within the PVR USB2 device.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22 12:01:51 -02:00
Mike Isely
db71b7df76 V4L/DVB (5574): Pvrusb2: Improve handling of PAL-60 video standard
This patch originated with Servaas Vandenberghe <vdb128@picaros.org>
and has been further developed a bit (to preserve saa7115 behavior).

These changes allow for correct operation of PAL-60 video (Servaas
tested this against a PAL-B/G tuner with the video standard overridden
as a module option).

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09 10:12:33 -03:00
Adrian Bunk
5948e52cee V4L/DVB (5294): Make pvr2_encoder_prep_config() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 15:43:24 -03:00
Mike Isely
201779f5c4 V4L/DVB (5210): Pvrusb2: Fix printk format typo
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:20 -02:00
Mike Isely
6fe7d2c466 V4L/DVB (5174): Pvrusb2: video corruption fixes
Tweak the encoder setup in order to stop it from corrupting the video
data when there is a disruption in the data flow (e.g. a channel change).

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:12 -02:00
Mike Isely
c43000ef0c V4L/DVB (5173): Pvrusb2: encoder comm protocol cleanup
Update the implementation of the communication protocol for operating
the encoder, using updated knowledge about the encoder.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:12 -02:00
Michael Krufky
8d3643637e V4L/DVB (5169): Pvrusb2: Use macro names for FX2 commands
This is a maintainability cleanup; use nice names for all the FX2
commands instead of raw bytes.  This way we can easily find where we
issue FX commands.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:11 -02:00
Mauro Carvalho Chehab
69b04f0dc1 V4L/DVB (5116): Remove some warnings when compiling on x86_64
pvrusb2-encoder.c: In function 'pvr2_encoder_cmd':
pvrusb2-encoder.c:195: warning: format '%u' expects
	type 'unsigned int', but argument 3 has type 'long unsigned int'
pvrusb2-encoder.c:205: warning: format '%u' expects
	type 'unsigned int', but argument 3 has type 'long unsigned int'
pvrusb2-encoder.c: In function 'pvr2_encoder_vcmd':
pvrusb2-encoder.c:303: warning: format '%u' expects
	type 'unsigned int', but argument 3 has type 'long unsigned int'

Acked-by: Mike Isely <isely@isely.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:47 -02:00
Ahmed S. Darwish
eca8ebfc11 V4L/DVB (5090): Pvrusb2: A patch to use ARRAY_SIZE macro when appropriate
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:40 -02:00
Mike Isely
16eb40d37d V4L/DVB (5057): Pvrusb2: Stream configuration cleanups
Clean up and tighten logic involving stream configuration.  This
mainly involves changes to pvrusb2-v4l2.c, where we better clarify how
we use the stream configuration enum and implement a cleaner means to
control streaming for a given device node.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:34 -02:00
Pantelis Koukousoulas
275b2e283b V4L/DVB (5034): Pvrusb2: Enable radio mode round #1
This is the logic that supports switching modes via e.g.,
  echo radio > /sys/class/pvrusb2/sn-*/ctl_input/cur_val.

To do the mode switching we need to:
a) broadcast AUDC_SET_RADIO and
b) issue the CX2341X_ENC_MUTE_VIDEO command to the encoder. 

The first is done by adding a new pvr2_i2c_op and having it trigger on 
input change, the second by adding this command in pvr2_encoder_start() 
and requesting an encoder restart on input change by setting 
stale_subsys_mask appropriately. 

The clues about AUDC_SET_RADIO and CX2341X_ENC_MUTE_VIDEO were kindly 
provided by Hans Verkuil on the pvrusb2 mailing list. The idea to 
implement mode switching this way (on input change) is due to Mike Isely.

Why AUDC_SET_RADIO/VIDIOC_S_STD are used for switching? I can 't be sure, 
but I think this can be traced to a cornell student being the first to 
implement radio support in ivtv "as a different standard". I think the 
rest just evolved from there (it 's in the ivtv ML archives).

Signed-off-by: Pantelis Koukousoulas <pakt223@freemail.gr>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:21 -02:00
Mauro Carvalho Chehab
58f56cbe29 V4L/DVB (4556): Fix a typo.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Mike Isely
a0fd1cb171 V4L/DVB (4288): Clean out a zillion sparse warnings in pvrusb2
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30 15:59:50 -03:00
Mauro Carvalho Chehab
c78059f0a9 V4L/DVB (4263): Fix warning when compiling on 64 bit machines
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27 00:17:43 -03:00
Mike Isely
b30d244176 V4L/DVB (4244): Implement use of cx2341x module in pvrusb2 driver
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27 00:17:32 -03:00
Mike Isely
c05c0462da V4L/DVB (4236): Rearrange things in pvrusb2 driver in preparation for using cx2341x module
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27 00:17:23 -03:00
Mike Isely
eacbe7c51f V4L/DVB (4232): Rearrange things in pvrusb2-encoder in preparation for use of cx2341x module
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27 00:17:18 -03:00
Mike Isely
d855497edb V4L/DVB (4228a): pvrusb2 to kernel 2.6.18
Implement V4L2 driver for the Hauppauge PVR USB2 TV tuner.

The Hauppauge PVR USB2 is a USB connected TV tuner with an embedded
cx23416 hardware MPEG2 encoder.  There are two major variants of this
device; this driver handles both.  Any V4L2 application which
understands MPEG2 video stream data should be able to work with this
device.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27 00:17:15 -03:00