Previous NETNS patches broke CONFIG_SYSCTL=n case
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Cleanups (all functions are prefixed by sock_prot_inuse)
sock_prot_inc_use(prot) -> sock_prot_inuse_add(prot,-1)
sock_prot_dec_use(prot) -> sock_prot_inuse_add(prot,-1)
sock_prot_inuse() -> sock_prot_inuse_get()
New functions :
sock_prot_inuse_init() and sock_prot_inuse_free() to abstract pcounter use.
2) if CONFIG_PROC_FS=n, we can zap 'inuse' member from "struct proto",
since nobody wants to read the inuse value.
This saves 1372 bytes on i386/SMP and some cpu cycles.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In include/net/ip_vs.h:
- The ip_vs_secure_tcp_set() method is not implemented anywhere.
- IP_VS_APP_TYPE_FTP is an unused definition.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These three declarations in include/net/ip.h are not implemented
anywhere:
ip_mc_dropsocket(), ip_mc_dropdevice() and ip_net_unreachable().
Also, correct a comment to be "Functions provided by ip_fragment.c"
(instead of by ip_fragment.o) in consistency with the other comments
in this header.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For five years we had two xfrm_policy_flush prototypes and every time that
function's signature changed people have been diligently updating both of
them without noticing :)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The snd_up check should be enough. I suspect this has been
there to provide a minor optimization in clean_rtx_queue which
used to have a small if (!->sacked) block which could skip
snd_up check among the other work.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces new memory accounting functions for each network
protocol. Most of them are renamed from memory accounting functions
for stream protocols. At the same time, some stream memory accounting
functions are removed since other functions do same thing.
Renaming:
sk_stream_free_skb() -> sk_wmem_free_skb()
__sk_stream_mem_reclaim() -> __sk_mem_reclaim()
sk_stream_mem_reclaim() -> sk_mem_reclaim()
sk_stream_mem_schedule -> __sk_mem_schedule()
sk_stream_pages() -> sk_mem_pages()
sk_stream_rmem_schedule() -> sk_rmem_schedule()
sk_stream_wmem_schedule() -> sk_wmem_schedule()
sk_charge_skb() -> sk_mem_charge()
Removeing
sk_stream_rfree(): consolidates into sock_rfree()
sk_stream_set_owner_r(): consolidates into skb_set_owner_r()
sk_stream_mem_schedule()
The following functions are added.
sk_has_account(): check if the protocol supports accounting
sk_mem_uncharge(): do the opposite of sk_mem_charge()
In addition, to achieve consolidation, updating sk_wmem_queued is
removed from sk_mem_charge().
Next, to consolidate memory accounting functions, this patch adds
memory accounting calls to network core functions. Moreover, present
memory accounting call is renamed to new accounting call.
Finally we replace present memory accounting calls with new interface
in TCP and SCTP.
Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Signed-off-by: Hideo Aoki <haoki@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_forward_alloc being signed, we should take care of divides by
SK_STREAM_MEM_QUANTUM we do in sk_stream_pages() and
__sk_stream_mem_reclaim()
This patchs introduces SK_STREAM_MEM_QUANTUM_SHIFT, defined
as ilog2(SK_STREAM_MEM_QUANTUM), to be able to use right
shifts instead of plain divides.
This should help compiler to choose right shifts instead of
expensive divides (as seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y on x86)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm actually surprised at how much was involved. At first glance it
appears that the neighbour table data structures are already split by
network device so all that should be needed is to modify the user
interface commands to filter the set of neighbours by the network
namespace of their devices.
However a couple things turned up while I was reading through the
code. The proxy neighbour table allows entries with no network
device, and the neighbour parms are per network device (except for the
defaults) so they now need a per network namespace default.
So I updated the two structures (which surprised me) with their very
own network namespace parameter. Updated the relevant lookup and
destroy routines with a network namespace parameter and modified the
code that interacts with users to filter out neighbour table entries
for devices of other namespaces.
I'm a little concerned that we can modify and display the global table
configuration and from all network namespaces. But this appears good
enough for now.
I keep thinking modifying the neighbour table to have per network
namespace instances of each table type would should be cleaner. The
hash table is already dynamically sized so there are it is not a
limiter. The default parameter would be straight forward to take care
of. However when I look at the how the network table is built and
used I still find some assumptions that there is only a single
neighbour table for each type of table in the kernel. The netlink
operations, neigh_seq_start, the non-core network users that call
neigh_lookup. So while it might be doable it would require more
refactoring than my current approach of just doing a little extra
filtering in the code.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a number of new IPsec audit events to meet the auditing
requirements of RFC4303. This includes audit hooks for the following events:
* Could not find a valid SA [sections 2.1, 3.4.2]
. xfrm_audit_state_notfound()
. xfrm_audit_state_notfound_simple()
* Sequence number overflow [section 3.3.3]
. xfrm_audit_state_replay_overflow()
* Replayed packet [section 3.4.3]
. xfrm_audit_state_replay()
* Integrity check failure [sections 3.4.4.1, 3.4.4.2]
. xfrm_audit_state_icvfail()
While RFC4304 deals only with ESP most of the changes in this patch apply to
IPsec in general, i.e. both AH and ESP. The one case, integrity check
failure, where ESP specific code had to be modified the same was done to the
AH code for the sake of consistency.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because sk_wmem_queued, sk_sndbuf are signed, a divide per two
may force compiler to use an integer divide.
We can instead use a right shift.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several length variables cannot be negative, so convert int to
unsigned int. This also allows us to do sane shift operations
on those variables.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a station is added to the kernel's structures, userspace
has to be able to retrieve statistics about that station, especially
whether the station was idle and how much bytes were transferred
to and from it. This adds the necessary code to nl80211.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds station handling to cfg80211/nl80211.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the necessary API to cfg80211/nl80211 to allow
changing beaconing settings.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements cfg80211's get_key() to allow retrieving the sequence
counter for a TKIP or CCMP key from userspace. It also cleans up and
documents the associated low-level driver interface.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces key handling to cfg80211/nl80211. Default
and group keys can be added, changed and removed; sequence
counters for each key can be retrieved.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are various decisions influencing the decision whether to buffer
a frame for after the next DTIM beacon. The "do we have stations in PS
mode" condition cannot be tested by the driver so mac80211 has to do
that. To ease driver writing for hardware that can buffer frames until
after the next DTIM beacon, introduce a new txctl flag telling the
driver to buffer a specific frame.
While at it, restructure and comment the code for multicast buffering
and remove spurious "inline" directives.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch left only one user of the ieee80211_is_eapol()
function and that user can be eliminated easily by introducing
a new "frame is EAPOL" flag to handle the frame specially (we
already have this information) instead of doing the (expensive)
ieee80211_is_eapol() all the time.
Also, allow unencrypted frames to be sent when they are injected.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a number of small but potentially troublesome things in the
XFRM/IPsec code:
* Use the 'audit_enabled' variable already in include/linux/audit.h
Removed the need for extern declarations local to each XFRM audit fuction
* Convert 'sid' to 'secid' everywhere we can
The 'sid' name is specific to SELinux, 'secid' is the common naming
convention used by the kernel when refering to tokenized LSM labels,
unfortunately we have to leave 'ctx_sid' in 'struct xfrm_sec_ctx' otherwise
we risk breaking userspace
* Convert address display to use standard NIP* macros
Similar to what was recently done with the SPD audit code, this also also
includes the removal of some unnecessary memcpy() calls
* Move common code to xfrm_audit_common_stateinfo()
Code consolidation from the "less is more" book on software development
* Proper spacing around commas in function arguments
Minor style tweak since I was already touching the code
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This statistics is shown factor dropped by transformation
at /proc/net/xfrm_stat for developer.
It is a counter designed from current transformation source code
and defined as linux private MIB.
See Documentation/networking/xfrm_proc.txt for the detail.
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 specific thing is wrongly removed from transformation at net-2.6.25.
This patch recovers it with current design.
o Update "path" of xfrm_dst since IPv6 transformation should
care about routing changes. It is required by MIPv6 and
off-link destined IPsec.
o Rename nfheader_len which is for non-fragment transformation used by
MIPv6 to rt6i_nfheader_len as IPv6 name space.
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is -700 bytes from the net/ipv4/built-in.o
add/remove: 1/0 grow/shrink: 1/3 up/down: 340/-1040 (-700)
function old new delta
__inet_lookup_established - 339 +339
tcp_sacktag_write_queue 2254 2255 +1
tcp_v4_err 1304 973 -331
tcp_v4_rcv 2089 1744 -345
tcp_v4_do_rcv 826 462 -364
Exporting is for dccp module (used via e.g. inet_lookup).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This one is used in quite many places in the networking code and
seems to big to be inline.
After the patch net/ipv4/build-in.o loses ~650 bytes:
add/remove: 2/0 grow/shrink: 0/5 up/down: 461/-1114 (-653)
function old new delta
__inet_hash_nolisten - 282 +282
__inet_hash - 179 +179
tcp_sacktag_write_queue 2255 2254 -1
__inet_lookup_listener 284 274 -10
tcp_v4_syn_recv_sock 755 493 -262
tcp_v4_hash 389 35 -354
inet_hash_connect 1086 599 -487
This version addresses the issue pointed by Eric, that
while being inline this function was optimized by gcc
in respect to the 'listen_possible' argument.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ADD-IP spec has a special case for processing ABORTs:
F4) ... One special consideration is that ABORT
Chunks arriving destined to the IP address being deleted MUST be
ignored (see Section 5.3.1 for further details).
Check if the address we received on is in the DEL state, and if
so, ignore the ABORT.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The processing of the ASCONF chunks has changed a lot in the
spec. New items are:
1. A list of ASCONF-ACK chunks is now cached
2. The source of the packet is used in response.
3. New handling for unexpect ASCONF chunks.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ADD-IP "Set Primary IP Address" parameter is allowed in the
INIT/INIT-ACK exchange. Allow processing of this parameter during
the INIT/INIT-ACK.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Address Parameter in the parameter list of the ASCONF chunk
may be a wildcard address. In this case special processing
is required. For the 'add' case, the source IP of the packet is
added. In the 'del' case, all addresses except the source IP
of packet are removed. In the "mark primary" case, the source
address is marked as primary.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SNMP macros use raw_smp_processor_id() in process context
which is illegal because the process may be preempted and then
migrated to another CPU.
This patch makes it use get_cpu/put_cpu to disable preemption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few netfilter modules provide their own union of IPv4 and IPv6
address storage. Will unify that in this patch series.
(1/4): Rename union nf_conntrack_address to union nf_inet_addr and
move it to x_tables.h.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
nf_nat_setup_info gets the hook number and translates that to the
manip type to perform. This is a relict from the time when one
manip per hook could exist, the exact hook number doesn't matter
anymore, its converted to the manip type. Most callers already
know what kind of NAT they want to perform, so pass the maniptype
in directly.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes mac80211 include the low-level MAC timestamp
in the radiotap header if the driver indicated (by a new
RX flag) that the timestamp is valid.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The crc32c library used an identical table and algorithm
as SCTP. Switch to using the library instead of carrying
our own table. Using crypto layer proved to have too
much overhead compared to using the library directly.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the core.
Add all and default pointers on the netns_ipv4 and register
a new pernet subsys to initialize them.
Also add the ctl_table_header to register the
net.ipv4.ip_forward ctl.
I don't allocate additional memory for init_net, but use
global devinets.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This one will need to set the IPV4_DEVCONF_ALL(PROXY_ARP), but
there's no ways to get the net right in place, so we have to
pull one from the inet_ioctl's struct sock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ipv4 will store its parameters inside this structure.
This one is empty now, but it will be eventually filled.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
X86_32 was the last user of the FASTCALL macro, now that it
uses regparm(3) by default, this macro expands to nothing.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
