Commit Graph

514 Commits

Author SHA1 Message Date
Jens Axboe
7aeacf9822 [BLOCK] blk_rq_map_sg: force clear termination bit
Since blk_rq_map_sg() sets the termination bit at the end of the sg
table, we could see it prematurely on the next mapping unless we
force drivers to do a full sg_init_table() prior to each mapping. So
force clear the termination bit to avoid having to put that clear in
the driver for every mapping.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:49:25 +02:00
Jens Axboe
ad0d4083e6 [BLOCK] Don't clear sg_dma_len/addr() in blk_rq_map_sg()
It's not a proper lvalue on all archs.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:27:05 +02:00
Jens Axboe
9b61764bcb [SG] Update block layer to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 19:39:33 +02:00
Uwe Kleine-König
dbe7f76dd6 fix typo "insted" -> "instead"
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:55:04 +02:00
Pavel Emelyanov
ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Randy Dunlap
8f731f7d83 kernel-api docbook: fix content problems
Fix kernel-api docbook contents problems.

docproc: linux-2.6.23-git13/include/asm-x86/unaligned_32.h: No such file or directory
Warning(linux-2.6.23-git13//include/linux/list.h:482): bad line: 			of list entry
Warning(linux-2.6.23-git13//mm/filemap.c:864): No description found for parameter 'ra'
Warning(linux-2.6.23-git13//block/ll_rw_blk.c:3760): No description found for parameter 'req'
Warning(linux-2.6.23-git13//include/linux/input.h:1077): No description found for parameter 'private'
Warning(linux-2.6.23-git13//include/linux/input.h:1077): No description found for parameter 'cdev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:35 -07:00
Jens Axboe
ba951841ce [BLOCK] blk_rq_map_sg() next_sg fixup
Don't ever use sg_next() on the last entry, it may not be valid!

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17 19:34:11 +02:00
Linus Torvalds
b6257a9036 Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [SCSI] Remove full sg table memset()
  [SCSI] ide-scsi: remove usage of sg_last()
  Fix loop terminating conditions in fill_sg().
  [BLOCK] Clear sg entry before filling in blk_rq_map_sg()
  IA64: iommu uses sg_next with an invalid sg element
  cciss: disable DMA refetch on Smart Array P600
  swiotlb: fix map_sg failure handling
  SPARC64: fix iommu sg chaining
  [SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
2007-10-17 09:08:13 -07:00
Peter Zijlstra
e0bf68ddec mm: bdi init hooks
provide BDI constructor/destructor hooks

[akpm@linux-foundation.org: compile fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Jens Axboe
60573b874b [BLOCK] Clear sg entry before filling in blk_rq_map_sg()
The memset() of the sg entry was originally removed, because it could
overwrite a chain pointer. But it's quite OK to memset() it when we know
it's a valid entry, since it can't contain a chain pointer.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-17 13:02:33 +02:00
Linus Torvalds
92d15c2ccb Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits)
  Fix memory leak in dm-crypt
  SPARC64: sg chaining support
  SPARC: sg chaining support
  PPC: sg chaining support
  PS3: sg chaining support
  IA64: sg chaining support
  x86-64: enable sg chaining
  x86-64: update pci-gart iommu to sg helpers
  x86-64: update nommu to sg helpers
  x86-64: update calgary iommu to sg helpers
  swiotlb: sg chaining support
  i386: enable sg chaining
  i386 dma_map_sg: convert to using sg helpers
  mmc: need to zero sglist on init
  Panic in blk_rq_map_sg() from CCISS driver
  remove sglist_len
  remove blk_queue_max_phys_segments in libata
  revert sg segment size ifdefs
  Fixup u14-34f ENABLE_SG_CHAINING
  qla1280: enable use_sg_chaining option
  ...
2007-10-16 10:09:16 -07:00
Fengguang Wu
f2e189827a readahead: remove the limit max_sectors_kb imposed on max_readahead_kb
Remove the size limit max_sectors_kb imposed on max_readahead_kb.

The size restriction is unreasonable.  Especially when max_sectors_kb cannot
grow larger than max_hw_sectors_kb, which can be rather small for some disk
drives.

Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:53 -07:00
Mike Travis
d5a7430ddc Convert cpu_sibling_map to be a per cpu variable
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu
variable.  This saves sizeof(cpumask_t) * NR unused cpus.  Access is mostly
from startup and CPU HOTPLUG functions.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:50 -07:00
Jens Axboe
3eed13fd93 Merge branch 'sglist-arch' into for-linus 2007-10-16 12:29:34 +02:00
Jens Axboe
a39d113936 Merge branch 'barrier' into for-linus 2007-10-16 12:29:29 +02:00
Jens Axboe
563063a808 ll_rw_blk: temporarily enable max_segments tweaking
Expose this setting for now, so that users can play with enabling
large commands without defaulting it to on globally. This is a debug
patch, it will be dropped for the final versions.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:08:53 +02:00
Jens Axboe
f565913ef8 block: convert to using sg helpers
Convert the main rq mapper (blk_rq_map_sg()) to the sg helper setup.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:07:11 +02:00
Jens Axboe
fd5d806266 block: convert blkdev_issue_flush() to use empty barriers
Then we can get rid of ->issue_flush_fn() and all the driver private
implementations of that.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:05:02 +02:00
Jens Axboe
bf2de6f5a4 block: Initial support for data-less (or empty) barrier support
This implements functionality to pass down or insert a barrier
in a queue, without having data attached to it. The ->prepare_flush_fn()
infrastructure from data barriers are reused to provide this
functionality.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:03:56 +02:00
Jens Axboe
c07e2b4129 block: factor our bio_check_eod()
End of device check is done twice in __generic_make_request() and it's
fully inlined each time.  Factor out bio_check_eod().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:03:55 +02:00
Jens Axboe
a0cd128542 block: add end_queued_request() and end_dequeued_request() helpers
We can use this helper in the elevator core for BLKPREP_KILL, and it'll
also be useful for the empty barrier patch.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:03:53 +02:00
Jens Axboe
4fa253f33c block: ll_rw_blk.c: cosmetics
Fix ?: construct, a typo, whitespace, and similar.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:03:49 +02:00
Arjan van de Ven
7344be053a bsg: mark struct file_operations const
struct file_operations is generally const (to avoid false sharing and get compile time errors on accidental writing to this shared structure); bsg recently added one of these without the const keyword. Patch below marks it const....

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 09:59:54 +02:00
Linus Torvalds
2b9e0aae1d Only enable BLOCK_COMPAT if COMPAT is needed
IOW, it needs to depend on both CONFIG_BLOCK and CONFIG_COMPAT.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12 17:58:36 -07:00
Linus Torvalds
efefc6eb38 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits)
  PM: merge device power-management source files
  sysfs: add copyrights
  kobject: update the copyrights
  kset: add some kerneldoc to help describe what these strange things are
  Driver core: rename ktype_edd and ktype_efivar
  Driver core: rename ktype_driver
  Driver core: rename ktype_device
  Driver core: rename ktype_class
  driver core: remove subsystem_init()
  sysfs: move sysfs file poll implementation to sysfs_open_dirent
  sysfs: implement sysfs_open_dirent
  sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir
  sysfs: make sysfs_root a regular directory dirent
  sysfs: open code sysfs_attach_dentry()
  sysfs: make s_elem an anonymous union
  sysfs: make bin attr open get active reference of parent too
  sysfs: kill unnecessary NULL pointer check in sysfs_release()
  sysfs: kill unnecessary sysfs_get() in open paths
  sysfs: reposition sysfs_dirent->s_mode.
  sysfs: kill sysfs_update_file()
  ...
2007-10-12 15:49:37 -07:00
Greg Kroah-Hartman
7e7654a92a cdev: remove unneeded setting of cdev names
struct cdev does not need the kobject name to be set, as it is never
used.  This patch fixes up the few places it is set.


Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-12 14:51:02 -07:00
Greg Kroah-Hartman
19c38de88a kobjects: fix up improper use of the kobject name field
A number of different drivers incorrect access the kobject name field
directly.  This is not correct as the name might not be in the array.
Use the proper accessor function instead.
2007-10-12 14:51:02 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Jens Axboe
99874d5048 [BLOCK] Only include the compat ioctl code if CONFIG_BLOCK is set
Add an extra CONFIG_BLOCK_COMPAT that we can use in the Makefile

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-12 12:50:41 +02:00
Arnd Bergmann
1ca91cd033 compat_ioctl: move floppy handlers to block/compat_ioctl.c
The floppy ioctls are used by multiple drivers, so they should be
handled in a shared location. Also, add minor cleanups.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
Arnd Bergmann
b3087cc4f3 compat_ioctl: move cdrom handlers to block/compat_ioctl.c
These are shared by all cd-rom drivers and should have common
handlers. Do slight cosmetic cleanups in the process.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
Arnd Bergmann
18cf7f8723 compat_ioctl: move BLKPG handling to block/compat_ioctl.c
BLKPG is common to all block devices, so it should be handled
by common code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
Arnd Bergmann
9617db085c compat_ioctl: move hdio calls to block/compat_ioctl.c
These are common to multiple block drivers, so they should
be handled by the block layer.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
Arnd Bergmann
171044d449 compat_ioctl: handle blk_trace ioctls
blk_trace_setup is broken on x86_64 compat systems,
this makes the code work correctly on all 64 bit architectures
in compat mode.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
Arnd Bergmann
7199d4cdd8 compat_ioctl: add compat_blkdev_driver_ioctl()
Handle those blockdev ioctl calls that are compatible
directly from the compat_blkdev_ioctl() function, instead
of having to go through the compat_ioctl hash lookup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
Arnd Bergmann
f58c4c0a17 compat_ioctl: move common block ioctls to compat_blkdev_ioctl
Make compat_blkdev_ioctl and blkdev_ioctl reflect the respective
native versions. This is somewhat more efficient and makes it easier
to keep the two in sync.

Also get rid of the bogus handling for broken_blkgetsize and the
duplicate entry for BLKRASET.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:26:00 +02:00
NeilBrown
6712ecf8f6 Drop 'size' argument from bio_endio and bi_end_io
As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant.  Remove it.

Now there is no need for bio_endio to subtract the size completed
from bi_size.  So don't do that either.

While we are at it, change bi_end_io to return void.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:57 +02:00
NeilBrown
5bb23a688b Don't decrement bi_size in bio_endio
The only caller of bio_endio that does not pass the full bi_size
is end_that_request_first.  Also, no ->bi_end_io method is really
interested in bi_size being decremented.

So move the decrement and related code into ll_rw_blk and merge it
with order_bio_endio to form req_bio_endio which does endio functionality
specific to request completion.

As some ->bi_end_io methods do check bi_size of 0, we set it thus for
now, but that will go in the next patch.

Signed-off-by: Neil Brown <neilb@suse.de>

### Diffstat output
 ./block/ll_rw_blk.c |   42 +++++++++++++++++++++++++++---------------
 ./fs/bio.c          |   23 +++++++++++------------
 2 files changed, 38 insertions(+), 27 deletions(-)

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:57 +02:00
NeilBrown
d24517d793 Remove flush_dry_bio_endio
The entire function of flush_dry_bio_endio is to undo the effects
of bio_endio (when called on a barrier request).  So remove the
function and the call to bio_endio.

This allows us to remove "bi_size" from "struct request_queue".

Signed-off-by: Neil Brown <neilb@suse.de>

### Diffstat output
 ./block/ll_rw_blk.c      |   39 ++-------------------------------------
 ./include/linux/blkdev.h |    1 -
 2 files changed, 2 insertions(+), 38 deletions(-)

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:57 +02:00
Satyam Sharma
db47d47537 ll_rw_blk: blk_cpu_notifier should be __cpuinitdata
blk_cpu_notifier is marked as __devinitdata, but __devinitdata need not
be __init even if HOTPLUG_CPU=n, which wastes space. It should be marked
__cpuinitdata, and the callback itself as __cpuinit.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
Jens Axboe
6c92e699b5 Fixup rq_for_each_segment() indentation
Remove one level of nesting where appropriate.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
NeilBrown
bc1c56fde6 Share code between init_request_from_bio and blk_rq_bio_prep
These have very similar functions and should share code where
possible.

Signed-off-by: Neil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
NeilBrown
66846572bf Stop exporting blk_rq_bio_prep
blk_rq_bio_prep is exported for use in exactly
one place.  That place can benefit from using
the new blk_rq_append_bio instead.
So
  - change dm-emc to call blk_rq_append_bio
  - stop exporting blk_rq_bio_prep, and
  - initialise rq_disk in blk_rq_bio_prep,
       as dm-emc needs it.

Signed-off-by: Neil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
NeilBrown
3001ca7712 New function blk_req_append_bio
ll_back_merge_fn is currently exported to SCSI where is it used,
together with blk_rq_bio_prep, in exactly the same way these
functions are used in __blk_rq_map_user.

So move the common code into a new function (blk_rq_append_bio), and
don't export ll_back_merge_fn any longer.

Signed-off-by: Neil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
NeilBrown
5705f70217 Introduce rq_for_each_segment replacing rq_for_each_bio
Every usage of rq_for_each_bio wraps a usage of
bio_for_each_segment, so these can be combined into
rq_for_each_segment.

We define "struct req_iterator" to hold the 'bio' and 'index' that
are needed for the double iteration.

Signed-off-by: Neil Brown <neilb@suse.de>

Various compile fixes by me...

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
NeilBrown
9dfa52831e Merge blk_recount_segments into blk_recalc_rq_segments
blk_recalc_rq_segments calls blk_recount_segments on each bio,
then does some extra calculations to handle segments that overlap
two bios.

If we merge the code from blk_recount_segments into
blk_recalc_rq_segments, we can process the whole request one bio_vec
at a time, and not need the messy cross-bio calculations.

Then blk_recount_segments can be implemented by calling
blk_recalc_rq_segments, passing it a simple on-stack request which
stores just the bio.

Signed-off-by: Neil Brown <neilb@suse.de>

diff .prev/block/ll_rw_blk.c ./block/ll_rw_blk.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10 09:25:56 +02:00
Nick Piggin
dd941252a8 shared tag queue barrier comment
Should add some comments for the tag barriers (they won't be so important
if we can switch over to the explicit _lock bitops, but for now we should
make it clear).

Jens' original patch said a barrier after the test_and_clear_bit was also
required. I can't see why (and it would prevent the use of the _lock bitop).

Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--
2007-09-14 13:56:47 -07:00
Jens Axboe
f3da54ba14 Fix race with shared tag queue maps
There's a race condition in blk_queue_end_tag() for shared tag maps,
users include stex (promise supertrak thingy) and qla2xxx.  The former
at least has reported bugs in this area, not sure why we haven't seen
any for the latter.  It could be because the window is narrow and that
other conditions in the qla2xxx code hide this.  It's a real bug,
though, as the stex smp users can attest.

We need to ensure two things - the tag bit clearing needs to happen
AFTER we cleared the tag pointer, as the tag bit clearing/setting is
what protects this map.  Secondly, we need to ensure that the visibility
of the tag pointer and tag bit clear are ordered properly.

[ I removed the SMP barriers - "test_and_clear_bit()" already implies
  all the required barriers.  -- Linus ]

Also see http://bugzilla.kernel.org/show_bug.cgi?id=7842

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-13 08:20:25 -07:00
Alan D. Brunelle
c7149d6bce Fix remap handling by blktrace
This patch provides more information concerning REMAP operations on block
IOs. The additional information provides clearer details at the user level,
and supports post-processing analysis in btt.

o  Adds in partition remaps on the same device.
o  Fixed up the remap information in DM to be in the right order
o  Sent up mapped-from and mapped-to device information

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-08-11 22:34:48 +02:00
FUJITA Tomonori
0c6a89ba64 [SCSI] bsg: update sg_io_v4 structure
This updates sg_io_v4 structure (based on Doug's RFC, release 1.3).

The major changes are:

- add dout_resid field
- increase tag size to 64 bits to comply with SAM-4 and SRP
- add dout_iovec_count and din_iovec_count

dout_iovec_count and din_iovec_count aren't supported now. I'm not
sure whether they will be supported or not but they were added for the
possible future changes.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31 10:43:05 -05:00
Linus Torvalds
a6ce22a5f6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (28 commits)
  [SCSI] mpt fusion: Changes in mptctl.c for logging support
  [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support
  [SCSI] mpt fusion: Changes in mptscsih.c for logging support
  [SCSI] mpt fusion: Changes in mptbase.c for logging support
  [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h
  [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()
  [SCSI] bsg: Fix build for CONFIG_BLOCK=n
  [SCSI] aacraid: fix Sunrise Lake reset handling
  [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking
  [SCSI] add easyRAID to the no report luns blacklist
  [SCSI] advansys: lindent and other large, uninteresting changes
  [SCSI] aic79xx, aic7xxx: Fix incorrect width setting
  [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
  [SCSI] aacraid: draw line in sand, sundry cleanup and version update
  [SCSI] iscsi_tcp: Turn off bounce buffers
  [SCSI] libiscsi: fix cmd seqeunce number checking
  [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template
  [SCSI] libiscsi: make sure session is not blocked when removing host
  [SCSI] libsas: Remove PCI dependencies
  [SCSI] simscsi: convert to use the data buffer accessors
  ...
2007-07-29 17:22:03 -07:00
Paul Mundt
99d4d0a9f2 [SCSI] bsg: Fix build for CONFIG_BLOCK=n
BLK_DEV_BSG was added outside of the if BLOCK check, which allows it to
be enabled when CONFIG_BLOCK=n. This leads to many screenlengths of
errors, starting with a parse error on the request_queue_t definition.
Obviously this wasn't intended for CONFIG_BLOCK=n usage, so just move the
option back in to the block.

Caught with a randconfig on sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-28 10:56:06 -04:00
Ingo Molnar
7c2ff389bb blktrace: use cpu_clock() instead of sched_clock()
use cpu_clock() instead of sched_clock(). (the latter is not a proper
clock-source)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-27 08:08:24 +02:00
Paul Mundt
4d5d8e9d3e bsg: Fix build for CONFIG_BLOCK=n
BLK_DEV_BSG was added outside of the if BLOCK check, which allows it to
be enabled when CONFIG_BLOCK=n. This leads to many screenlengths of
errors, starting with a parse error on the request_queue_t definition.
Obviously this wasn't intended for CONFIG_BLOCK=n usage, so just move the
option back in to the block.

Caught with a randconfig on sh.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

--

 block/Kconfig |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-27 08:08:24 +02:00
Jens Axboe
165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
FUJITA Tomonori
1079ddcb07 [SCSI] bsg: remove unnecessary code and comments
- kill uhdr in bsg_command structure
- it's not necessary to put SG v4 stuff to block/scsi_ioctl.c

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-23 16:50:16 -05:00
FUJITA Tomonori
598443a212 [SCSI] bsg: use lib/idr.c to find a unique minor number
This replaces the current linear search for a unique minor number with
lib/idr.c.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-23 16:49:44 -05:00
Linus Torvalds
e6f194d8f6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...
2007-07-22 11:36:49 -07:00
FUJITA Tomonori
41e1703b9b [SCSI] bsg: unexport sg v3 helper functions
blk_fill_sghdr_rq, blk_unmap_sghdr_rq, and blk_complete_sghdr_rq were
exported for bsg, however bsg was changed to support only sg v4.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22 08:48:41 -05:00
FUJITA Tomonori
df468820b6 [SCSI] bsg: fix bsg_unregister_queue
scsi_sysfs_add_sdev ignores the bsg_register_queue failure, so
bsg_unregister_queue must check whether the queue has a bsg device.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21 08:58:41 -05:00
James Bottomley
39dca558a5 [SCSI] bsg: make class backlinks
Currently, bsg doesn't make class backlinks (a process whereby you'd get
a link to bsg in the device directory in the same way you get one for
sg).  This is because the bsg device is uninitialised, so the class
device has nothing it can attach to.  The fix is to make the bsg device
point to the cdevice of the entity creating the bsg, necessitating
changing the bsg_register_queue() prototype into a form that takes the
generic device.

Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21 08:58:23 -05:00
James Bottomley
6826ee4fdb [SCSI] bsg: fix bsg_register_queue error path
unfortunately, if IS_ERR(class_dev) is true, that means class_dev isn't
null and the check in the error leg is pointless ... it's also asking
for trouble to request unregistration of a device we haven't actually
created (although it works currently).  Fix by using explicit gotos and
unregisters.

Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21 08:53:33 -05:00
Alexey Dobriyan
8350163a90 cfq: Write-only stuff in CFQ data structures
There are some leftover bits from the task cooperator patch, that was
yanked out again. While it will get reintroduced, no point in having
this write-only stuff in the tree. So yank it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20 10:07:50 +02:00
Vasily Tarasov
c2dea2d1fd cfq: async queue allocation per priority
If we have two processes with different ioprio_class, but the same
ioprio_data, their async requests will fall into the same queue. I guess
such behavior is not expected, because it's not right to put real-time
requests and best-effort requests in the same queue.

The attached patch fixes the problem by introducing additional *cfqq
fields on cfqd, pointing to per-(class,priority) async queues.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20 10:06:38 +02:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
James Bottomley
80ed71ce1a [SCSI] bsg: separate bsg and SCSI (so SCSI can be modular)
This patch moves the bsg registration into SCSI so that bsg no longer
has a dependency on the scsi_interface_register API.

This can be viewed as a temporary expedient until we can get universal
bsg binding sorted out properly.  Also use the sdev bus_id as the
generic bsg name (to avoid clashes with the queue name).

Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-19 12:37:34 -05:00
Yoann Padioleau
dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Linus Torvalds
f3d9071667 Merge branch 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block
* 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block:
  bsg: fix missing space in version print
  Don't define empty struct bsg_class_device if !CONFIG_BLK_DEV_BSG
  bsg: Kconfig updates
  bsg: minor cleanup
  bsg: device hash table cleanup
  bsg: fix initialization error handling bugs
  bsg: mark FUJITA Tomonori as bsg maintainer
  bsg: convert to dynamic major
  bsg: address various review comments
2007-07-17 15:26:31 -07:00
Akinobu Mita
f4480240f7 unregister_blkdev(): return void
Put WARN_ON and fixed all callers of unregister_blkdev().  Now we can make
unregister_blkdev return void.

Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Akinobu Mita
294462a5c6 unregister_blkdev(): do WARN_ON on failure
When unregister_blkdev() has failed, something wrong happened.  This patch
adds WARN_ON to notify of such badness.

Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Christoph Lameter
94f6030ca7 Slab allocators: Replace explicit zeroing with __GFP_ZERO
kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing
variant in the past.  But with __GFP_ZERO it is possible now to do zeroing
while allocating.

Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever
we can.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Jens Axboe
5d3a8cd34b bsg: fix missing space in version print
Tomo introduced a bug in his commit, removing the space between
"driver" and "version" in the init printk.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 15:10:09 +02:00
FUJITA Tomonori
319a7b7fb9 bsg: Kconfig updates
- add the detailed explanation.
- remove 'default y'.
- make 'EXPERIMENTAL' keyword visible to the user in menu.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 12:22:09 +02:00
FUJITA Tomonori
0ed081ce20 bsg: minor cleanup
- fix MODULE_DESCRIPTION typo.
- unify MODULE_DESCRIPTION and bsg_version.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 12:21:35 +02:00
FUJITA Tomonori
1c1133e1ff bsg: device hash table cleanup
- kill unused bsg_list_idx macro.
- add bsg_dev_idx_hash() that returns an appropriate hlist_head.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 12:21:15 +02:00
FUJITA Tomonori
9b9f770cef bsg: fix initialization error handling bugs
This fixes the following bugs and cleans up the initialization code:

- cdev_del is missing.
- unregister_chrdev_region should be used instead of unregister_chrdev.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 12:20:46 +02:00
Jens Axboe
46f6ef4afc bsg: convert to dynamic major
240 was hardcoded, that was clearly a dumb mistake. Convert bsg
to use alloc_chrdev_region() to retrieve a dynamic major.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 08:56:10 +02:00
Jens Axboe
25fd164303 bsg: address various review comments
This address most of the comments made by Andrew. The two remaining
are conversion to idr, and dynamic major.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17 08:52:29 +02:00
Linus Torvalds
29417b899a Make BLK_DEV_BSG depend strictly on SCSI=y
The SCSI code can be compiled modular, but BLK_DEV_BSG currently cannot,
and depends on the SCSI layer.  So make sure that it depends on the SCSI
layer being compiled in, not just available as a module.

Noticed by Jeff Garzik and S.Çağlar Onur.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 16:53:22 -07:00
Linus Torvalds
abce891a10 Fix new generic block device SG compile
We had a merge issue with the "dentry" field going away from the
kobject, and being replaced by a sysfs_dirent field (named "sd")
instead.  That broke the BSG compile.

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 11:18:23 -07:00
FUJITA Tomonori
58ff411e0d bsg: Kconfig updates
This updates bsg entry in Kconfig:

- bsg supports sg v4
- bsg depends on SCSI
- it might be better to mark it experimental for a while

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:47 +02:00
FUJITA Tomonori
15d10b611f bsg: add SCSI transport-level request support
This enables bsg to handle SCSI transport-level request like SAS
management protocol (SMP).

- add BSG_SUB_PROTOCOL_{SCSI_CMD, SCSI_TMF, SCSI_TRANSPORT} definitions.
- SCSI transport-level requests skip blk_verify_command().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:47 +02:00
FUJITA Tomonori
2c9ecdf40a bsg: add bidi support
bsg uses the rq->next_rq pointer for a bidi request.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:47 +02:00
FUJITA Tomonori
abae1fde63 add a struct request pointer to the request structure
This adds a struct request pointer to the request structure for the
second data phase (bidi for now). A request queue supporting bidi
requests sets QUEUE_FLAG_BIDI. This prevents sending bidi requests to
a non-bidi queue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
efba1a31f3 bsg: fix the deadlock on discarding done commands
The previous commit introduced a deadlock in discarding commands,
because we forget to unlock the bd spinlock.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
e7d7217324 bsg: fix a blocking read bug
This patch fixes a bug that read() returns ENODATA even with a
blocking file descriptor when there are no commands pending.

This also includes some cleanups.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
4cf0723ac8 bsg: minor bug fixes
This fixes the following minor issues:

- add EXPORT_SYMBOL_GPL for bsg_register_queue and
bsg_unregister_queue.

- shut up gcc warnings

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <axboe@nelson.home.kernel.dk>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
292b7f2712 improve bsg device allocation
This patch addresses on two issues on bsg device allocation.

- the current maxium number of bsg devices is 256. It's too small if
we allocate bsg devices to all SCSI devices, transport entities, etc.
This increses the maxium number to 32768 (taken from the sg driver).

- SCSI devices are dynamically added and removed. Currently, bsg can't
handle it well since bsd_device->minor is simply increased.

This is dependent on the patchset that I posted yesterday:

http://marc.info/?l=linux-scsi&m=117440208726755&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
4e2872d6b0 bind bsg to all SCSI devices
This patch binds bsg to all SCSI devices (their request queues) like
the current sg driver does. We can send SCSI commands to non disk and
cdrom scsi devices like OSD via bsg.

This patch removes bsg_register_queue from blk_register_queue so bsg
devices aren't bound to non SCSI block devices. If they want bsg, I'll
send a patch to do that.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
d351af01b9 bsg: bind bsg to request_queue instead of gendisk
This patch binds bsg devices to request_queue instead of gendisk. Any
objects (like transport entities) can define own request_handler and
create own bsg device.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:46 +02:00
FUJITA Tomonori
45e79a3acd bsg: add a request_queue argument to scsi_cmd_ioctl()
bsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl
commands. scsi_cmd_ioctl() gets a request queue from a gendisk
arguement. This prevents bsg being bound to SCSI devices that don't
have a gendisk (like OSD). This adds a request_queue argument to
scsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn't use a gendisk so
it's safe for any SCSI devices to use scsi_cmd_ioctl().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:45 +02:00
FUJITA Tomonori
7e75d73080 bsg: simplify __bsg_alloc_command failpath
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:45 +02:00
Jens Axboe
264a047218 bsg: add cheasy error checks for sysfs stuff
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:45 +02:00
Jens Axboe
5309cb38de Add queue resizing support
Just get rid of the preallocated command map, use the slab cache
to get/free commands instead.

Original patch from FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
changed by me to not use a mempool.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:45 +02:00
Jens Axboe
2ef7086a20 bsg: silence a bogus gcc warning
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:45 +02:00
Jens Axboe
b711afa695 bsg: style cleanup
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:45 +02:00
FUJITA Tomonori
10e8855b94 bsg: add SG_IO to SG v4
This adds SG_IO support to SG v4.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:44 +02:00
FUJITA Tomonori
70e36eceaf bsg: replace SG v3 with SG v4
This patch replaces SG v3 in bsg with SG v4 (except for SG_IO).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:44 +02:00
FUJITA Tomonori
337ad41dea block: export blk_verify_command for SG v4
blk_fill_sghdr_rq doesn't work for SG v4 so verify_command needed to
be exported.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:44 +02:00
FUJITA Tomonori
9e69fbb537 bsg: minor cleanups
This just kills linux/config.h and dprintk warnings.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:44 +02:00
FUJITA Tomonori
ac6b91b803 block: changes for blk_rq_unmap_user new API
This converts block/scsi_ioctl.c use blk_rq_unmap_user new
API. blk_unmap_sghdr_rq is too simple and it might be better to remove
it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:44 +02:00
Jens Axboe
3d6392cfbd bsg: support for full generic block layer SG v3
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 08:52:44 +02:00
Matthias Kaehlcke
70cee26e02 Use list_for_each_entry() instead of list_for_each() in the block device
elevator

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 13:43:32 +02:00
Jan Engelhardt
16ed002f22 Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 13:43:27 +02:00
Jens Axboe
15c31be4d5 cfq-iosched: fix async queue behaviour
With the cfq_queue hash removal, we inadvertently got rid of the
async queue sharing. This was not intentional, in fact CFQ purposely
shares the async queue per priority level to get good merging for
async writes.

So put some logic in cfq_get_queue() to track the shared queues.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 13:43:25 +02:00
Tejun Heo
f4b09303d0 [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
Barrier bios are completed twice - once after the barrier write itself
is done and again after the whole sequence is complete.
flush_dry_bio_endio() is for the first completion.  It doesn't really
complete the bio.  It rewinds bvec and resets bio so that it can be
completed again when the whole barrier sequence is complete.

The bvec rewinding code has the following problems.

1. The rewinding code is wrong because filesystems may pass bvec with
   non zero bv_offset.

2. The block layer doesn't guarantee anything about the state of
   bvec array on request completion.  bv_offset and len are updated
   iff __end_that_request_first() completes the bvec partially.

Because of #2, #1 doesn't really matter (nobody cares whether bvec is
re-wound correctly or not) but then again by not doing unwinding at
all, we'll always give back the same bvec to the caller as full bvec
completion doesn't alter bvecs and the final completion is always full
completion.

Drop unnecessary rewinding code.

This is spotted by Neil Brown.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:03:33 +02:00
Jens Axboe
32eef96411 blk_hw_contig_segment(): bad segment size checks
Two bugs in there:

- The virt oversize check should use the current bio hardware back
  size and the next bio front size, not the same bio. Spotted by
  Neil Brown.

- The segment size check should add hw front sizes, not total bio
  sizes. Spotted by James Bottomley

Acked-by: James Bottomley <James.Bottomley@SteelEye.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:03:32 +02:00
Tejun Heo
bc90ba093a block: always requeue !fs requests at the front
SCSI marks internal commands with REQ_PREEMPT and push it at the front
of the request queue using blk_execute_rq().  When entering suspended
or frozen state, SCSI devices are quiesced using
scsi_device_quiesce().  In quiesced state, only REQ_PREEMPT requests
are processed.  This is how SCSI blocks other requests out while
suspending and resuming.  As all internal commands are pushed at the
front of the queue, this usually works.

Unfortunately, this interacts badly with ordered requeueing.  To
preserve request order on requeueing (due to busy device, active EH or
other failures), requests are sorted according to ordered sequence on
requeue if IO barrier is in progress.

The following sequence deadlocks.

1. IO barrier sequence issues.

2. Suspend requested.  Queue is quiesced with part or all of IO
   barrier sequence at the front.

3. During suspending or resuming, SCSI issues internal command which
   gets deferred and requeued for some reason.  As the command is
   issued after the IO barrier in #1, ordered requeueing code puts the
   request after IO barrier sequence.

4. The device is ready to process requests again but still is in
   quiesced state and the first request of the queue isn't
   REQ_PREEMPT, so command processing is deadlocked -
   suspending/resuming waits for the issued request to complete while
   the request can't be processed till device is put back into
   running state by resuming.

This can be fixed by always putting !fs requests at the front when
requeueing.

The following thread reports this deadlock.

  http://thread.gmane.org/gmane.linux.kernel/537473

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: David Greaves <david@dgreaves.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-15 16:12:20 -07:00
Kristen Carlson Accardi
8ce7ad7b2d genhd: send async notification on media change
Send an uevent to user space to indicate that a media change event has
occurred.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:12 -07:00
Kristen Carlson Accardi
86ce18d7b7 genhd: expose AN to user space
Allow user space to determine if a disk supports Asynchronous Notification of
media changes.  This is done by adding a new sysfs file "capability_flags",
which is documented in (insert file name).  This sysfs file will export all
disk capabilities flags to user space.  We also define a new flag to define
the media change notification capability.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:11 -07:00
Jens Axboe
f653c34dd3 ll_rw_blk: fix gcc 4.2 warning on current_io_context()
current_io_context() is both static and exported with EXPORT_SYMBOL().
As there are no users outside of ll_rw_blk.c itself, just kill the
export.

Problem reported by Martin Michlmayr <tbm@cyrius.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-15 10:44:15 -07:00
Neil Brown
d89d87965d When stacked block devices are in-use (e.g. md or dm), the recursive calls
to generic_make_request can use up a lot of space, and we would rather they
didn't.

As generic_make_request is a void function, and as it is generally not
expected that it will have any effect immediately, it is safe to delay any
call to generic_make_request until there is sufficient stack space
available.

As ->bi_next is reserved for the driver to use, it can have no valid value
when generic_make_request is called, and as __make_request implicitly
assumes it will be NULL (ELEVATOR_BACK_MERGE fork of switch) we can be
certain that all callers set it to NULL.  We can therefore safely use
bi_next to link pending requests together, providing we clear it before
making the real call.

So, we choose to allow each thread to only be active in one
generic_make_request at a time.  If a subsequent (recursive) call is made,
the bio is linked into a per-thread list, and is handled when the active
call completes.

As the list of pending bios is per-thread, there are no locking issues to
worry about.

I say above that it is "safe to delay any call...".  There are, however,
some behaviours of a make_request_fn which would make it unsafe.  These
include any behaviour that assumes anything will have changed after a
recursive call to generic_make_request.

These could include:
 - waiting for that call to finish and call it's bi_end_io function.
   md use to sometimes do this (marking the superblock dirty before
   completing a write) but doesn't any more
 - inspecting the bio for fields that generic_make_request might
   change, such as bi_sector or bi_bdev.  It is hard to see a good
   reason for this, and I don't think anyone actually does it.
 - inspecing the queue to see if, e.g. it is 'full' yet.  Again, I
   think this is very unlikely to be useful, or to be done.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <dm-devel@redhat.com>

Alasdair G Kergon <agk@redhat.com> said:

 I can see nothing wrong with this in principle.

 For device-mapper at the moment though it's essential that, while the bio
 mappings may now get delayed, they still get processed in exactly
 the same order as they were passed to generic_make_request().

 My main concern is whether the timing changes implicit in this patch
 will make the rare data-corrupting races in the existing snapshot code
 more likely. (I'm working on a fix for these races, but the unfinished
 patch is already several hundred lines long.)

 It would be helpful if some people on this mailing list would test
 this patch in various scenarios and report back.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-11 13:28:37 +02:00
Linus Torvalds
9a9136e270 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits)
  sound: convert "sound" subdirectory to UTF-8
  MAINTAINERS: Add cxacru website/mailing list
  include files: convert "include" subdirectory to UTF-8
  general: convert "kernel" subdirectory to UTF-8
  documentation: convert the Documentation directory to UTF-8
  Convert the toplevel files CREDITS and MAINTAINERS to UTF-8.
  remove broken URLs from net drivers' output
  Magic number prefix consistency change to Documentation/magic-number.txt
  trivial: s/i_sem /i_mutex/
  fix file specification in comments
  drivers/base/platform.c: fix small typo in doc
  misc doc and kconfig typos
  Remove obsolete fat_cvf help text
  Fix occurrences of "the the "
  Fix minor typoes in kernel/module.c
  Kconfig: Remove reference to external mqueue library
  Kconfig: A couple of grammatical fixes in arch/i386/Kconfig
  Correct comments in genrtc.c to refer to correct /proc file.
  Fix more "deprecated" spellos.
  Fix "deprecated" typoes.
  ...

Fix trivial comment conflict in kernel/relay.c.
2007-05-09 12:54:17 -07:00
Rafael J. Wysocki
8bb7844286 Add suspend-related notifications for CPU hotplug
Since nonboot CPUs are now disabled after tasks and devices have been
frozen and the CPU hotplug infrastructure is used for this purpose, we need
special CPU hotplug notifications that will help the CPU-hotplug-aware
subsystems distinguish normal CPU hotplug events from CPU hotplug events
related to a system-wide suspend or resume operation in progress.  This
patch introduces such notifications and causes them to be used during
suspend and resume transitions.  It also changes all of the
CPU-hotplug-aware subsystems to take these notifications into consideration
(for now they are handled in the same way as the corresponding "normal"
ones).

[oleg@tv-sign.ru: cleanups]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:56 -07:00
Oleg Nesterov
28e53bddf8 unify flush_work/flush_work_keventd and rename it to cancel_work_sync
flush_work(wq, work) doesn't need the first parameter, we can use cwq->wq
(this was possible from the very beginnig, I missed this).  So we can unify
flush_work_keventd and flush_work.

Also, rename flush_work() to cancel_work_sync() and fix all callers.
Perhaps this is not the best name, but "flush_work" is really bad.

(akpm: this is why the earlier patches bypassed maintainers)

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Auke Kok <auke-jan.h.kok@intel.com>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:53 -07:00
Andrew Morton
19a75d83ff kblockd: use flush_work
Switch the kblockd flushing from a global flush to a more specific
flush_work().

(akpm: bypassed maintainers, sorry.  There are other patches which depend on
this)

Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:51 -07:00
Dave Gilbert
dd2a345f8f Display all possible partitions when the root filesystem failed to mount
Display all possible partitions when the root filesystem is not mounted.
This helps to track spell'o's and missing drivers.

Updated to work with newer kernels.

Example output:

VFS: Cannot open root device "foobar" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
0800    8388608 sda driver: sd
  0801     192748 sda1
  0802    8193150 sda2
0810    4194304 sdb driver: sd
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[akpm@linux-foundation.org: cleanups, fix printk warnings]
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Dave Gilbert <linux@treblig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:48 -07:00
Michael Opdenacker
59c51591a0 Fix occurrences of "the the "
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:57:56 +02:00
Linus Torvalds
02a93208ed Merge branch 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern()
  [PATCH] splice: always call into page_cache_readahead()
  [PATCH] splice(): fix interaction with readahead
2007-05-08 11:34:52 -07:00
Nick Piggin
c6a632a2b6 as: fix antic_expire check
Fix units mismatch (jiffies vs msecs) in as-iosched.c, spotted by Xiaoning
Ding <dingxn@cse.ohio-state.edu>.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:03 -07:00
Mike Christie
821de3a27b [PATCH] ll_rw_blk: fix missing bounce in blk_rq_map_kern()
I think we might just need the blk_map_kern users now. For the async
execute I added the bounce code already and the block SG_IO has it
atleady. I think the blk_map_kern bounce code got dropped because we
thought the correct gfp_t would be passed in. But I think all we need is
the patch below and all the paths are take care of. The patch is not
tested. Patch was made against scsi-misc.

The last place that is sending non sg commands may just be md/dm-emc.c
but that is is just waiting on alasdair to take some patches that fix
that and a bunch of junk in there including adding bounce support. If
the patch below is ok though and dm-emc finally gets converted then it
will have sg and bonce buffer support.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-05-08 19:12:23 +02:00
Christoph Lameter
0a31bd5f2b KMEM_CACHE(): simplify slab cache creation
This patch provides a new macro

KMEM_CACHE(<struct>, <flags>)

to simplify slab creation. KMEM_CACHE creates a slab with the name of the
struct, with the size of the struct and with the alignment of the struct.
Additional slab flags may be specified if necessary.

Example

struct test_slab {
	int a,b,c;
	struct list_head;
} __cacheline_aligned_in_smp;

test_slab_cache = KMEM_CACHE(test_slab, SLAB_PANIC)

will create a new slab named "test_slab" of the size sizeof(struct
test_slab) and aligned to the alignment of test slab.  If it fails then we
panic.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:55 -07:00
Peter Zijlstra
f98393a64c mm: remove destroy_dirty_buffers from invalidate_bdev()
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't
been used in 6 years (so akpm says).

find * -name \*.[ch] | xargs grep -l invalidate_bdev |
while read file; do
	quilt add $file;
	sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file;
done

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:55 -07:00
Linus Torvalds
4f7a307dc6 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
  [SCSI] fusion: fix domain validation loops
  [SCSI] qla2xxx: fix regression on sparc64
  [SCSI] modalias for scsi devices
  [SCSI] sg: cap reserved_size values at max_sectors
  [SCSI] BusLogic: stop using check_region
  [SCSI] tgt: fix rdma transfer bugs
  [SCSI] aacraid: fix aacraid not finding device
  [SCSI] aacraid: Correct SMC products in aacraid.txt
  [SCSI] scsi_error.c: Add EH Start Unit retry
  [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
  [SCSI] ipr: Driver version to 2.3.2
  [SCSI] ipr: Faster sg list fetch
  [SCSI] ipr: Return better qc_issue errors
  [SCSI] ipr: Disrupt device error
  [SCSI] ipr: Improve async error logging level control
  [SCSI] ipr: PCI unblock config access fix
  [SCSI] ipr: Fix for oops following SATA request sense
  [SCSI] ipr: Log error for SAS dual path switch
  [SCSI] ipr: Enable logging of debug error data for all devices
  [SCSI] ipr: Add new PCI-E IDs to device table
  ...
2007-05-05 13:30:44 -07:00
Greg Kroah-Hartman
823bccfc40 remove "struct subsystem" as it is no longer needed
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 18:57:59 -07:00
Jens Axboe
07e4470805 Merge branch 'cfq' into for-linus 2007-04-30 09:09:27 +02:00
Jens Axboe
2a12dcd71a [PATCH] elevator: elv_list_lock does not need irq disabling
It's never grabbed from irq context, so just make it plain spin_lock().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:08:17 +02:00
Jens Axboe
597bc485d6 cfq-iosched: speedup cic rb lookup
We often lookup the same queue many times in succession, so cache
the last looked up queue to avoid browsing the rbtree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe
4e521c27ee ll_rw_blk: add io_context private pointer
To be used by as/cfq as they see fit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Vasily Tarasov
91fac317a3 cfq-iosched: get rid of cfqq hash
cfq hash is no more necessary.  We always can get cfqq from io context.
cfq_get_io_context_noalloc() function is introduced, because we don't
want to allocate cic on merging and checking may_queue.  In order to
identify sync queue we've used hash key = CFQ_KEY_ASYNC. Since hash is
eliminated we need to use other criterion: sync flag for queue is added.
In all places where we dig in rb_tree we're in current context, so no
additional locking is required.

Advantages of this patch: no additional memory for hash, no seeking in
hash, code is cleaner. But it is necessary now to seek cic in per-ioc
rbtree, but it is faster:
- most processes work only with few devices
- most systems have only few block devices
- it is a rb-tree

Signed-off-by: Vasily Tarasov <vtaras@openvz.org>

Changes by me:

- Merge into CFQ devel branch
- Get rid of cfq_get_io_context_noalloc()
- Fix various bugs with dereferencing cic->cfqq[] with offset other
  than 0 or 1.
- Fix bug in cfqq setup, is_sync condition was reversed.
- Fix bug where only bio_sync() is used, we need to check for a READ too

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe
cc19747977 cfq-iosched: tighten queue request overlap condition
For tagged devices, allow overlap of requests if the idle window
isn't enabled on the current active queue.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe
3ed9a2965c cfq-iosched: improve sync vs async workloads
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:23 +02:00
Jens Axboe
1be92f2fc7 cfq-iosched: never allow an async queue idling
We don't enable it by default, don't let it get enabled during
runtime.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
20e493a8d0 cfq-iosched: get rid of ->dispatch_slice
We can track it fairly accurately locally, let the slice handling
take care of the rest.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
6084cdda0e cfq-iosched: don't pass unused preemption variable around
We don't use it anymore in the slice expiry handling.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
edd75ffd92 cfq-iosched: get rid of ->cur_rr and ->cfq_list
It's only used for preemption now that the IDLE and RT queues also
use the rbtree. If we pass an 'add_front' variable to
cfq_service_tree_add(), we can set ->rb_key to 0 to force insertion
at the front of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
67e6b49e39 cfq-iosched: slice offset should take ioprio into account
Use the max_slice-cur_slice as the multipler for the insertion offset.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
498d3aa2b4 [PATCH] cfq-iosched: style cleanups and comments
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
67060e3799 cfq-iosched: sort IDLE queues into the rbtree
Same treatment as the RT conversion, just put the sorted idle
branch at the end of the tree.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
0c534e0a46 cfq-iosched: sort RT queues into the rbtree
Currently CFQ does a linked insert into the current list for RT
queues. We can just factor the class into the rb insertion,
and then we don't have to treat RT queues in a special way. It's
faster, too.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:22 +02:00
Jens Axboe
cc09e2990f [PATCH] cfq-iosched: speed up rbtree handling
For cases where the rbtree is mainly used for sorting and min retrieval,
a nice speedup of the rbtree code is to maintain a cache of the leftmost
node in the tree.

Also spotted in the CFS CPU scheduler code.

Improved by Alan D. Brunelle <Alan.Brunelle@hp.com> by updating the
leftmost hint in cfq_rb_first() if it isn't set, instead of only
updating it on insert.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe
d9e7620e60 cfq-iosched: rework the whole round-robin list concept
Drawing on some inspiration from the CFS CPU scheduler design, overhaul
the pending cfq_queue concept list management. Currently CFQ uses a
doubly linked list per priority level for sorting and service uses.
Kill those lists and maintain an rbtree of cfq_queue's, sorted by when
to service them.

This unfortunately means that the ionice levels aren't as strong
anymore, will work on improving those later. We only scale the slice
time now, not the number of times we service. This means that latency
is better (for all priority levels), but that the distinction between
the highest and lower levels aren't as big.

The diffstat speaks for itself.

 cfq-iosched.c |  363 +++++++++++++++++---------------------------------
 1 file changed, 125 insertions(+), 238 deletions(-)

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe
1afba0451c cfq-iosched: minor updates
- Move the queue_new flag clear to when the queue is selected
- Only select the non-first queue in cfq_get_best_queue(), if there's
  a substantial difference between the best and first.
- Get rid of ->busy_rr
- Only select a close cooperator, if the current queue is known to take
  a while to "think".

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe
6d048f5310 cfq-iosched: development update
- Implement logic for detecting cooperating processes, so we
  choose the best available queue whenever possible.

- Improve residual slice time accounting.

- Remove dead code: we no longer see async requests coming in on
  sync queues. That part was removed a long time ago. That means
  that we can also remove the difference between cfq_cfqq_sync()
  and cfq_cfqq_class_sync(), they are now indentical. And we can
  kill the on_dispatch array, just make it a counter.

- Allow a process to go into the current list, if it hasn't been
  serviced in this scheduler tick yet.

Possible future improvements including caching the cfqq lookup
in cfq_close_cooperator(), so we don't have to look it up twice.
cfq_get_best_queue() should just use that last decision instead
of doing it again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe
1e3335de05 cfq-iosched: improve preemption for cooperating tasks
When testing the syslet async io approach, I discovered that CFQ
sometimes didn't perform as well as expected. cfq_should_preempt()
needs to better check for cooperating tasks, so fix that by allowing
preemption of an equal priority queue if the recently queued request
is as good a candidate for IO as the one we are currently waiting for.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30 09:01:21 +02:00
Jens Axboe
5044eed488 cfq-iosched: fix alias + front merge bug
There's a really rare and obscure bug in CFQ, that causes a crash in
cfq_dispatch_insert() due to rq == NULL.  One example of the resulting
oops is seen here:

	http://lkml.org/lkml/2007/4/15/41

Neil correctly diagnosed the situation for how this can happen: if two
concurrent requests with the exact same sector number (due to direct IO
or aliasing between MD and the raw device access), the alias handling
will add the request to the sortlist, but next_rq remains NULL.

Read the more complete analysis at:

	http://lkml.org/lkml/2007/4/25/57

This looks like it requires md to trigger, even though it should
potentially be possible to due with O_DIRECT (at least if you edit the
kernel and doctor some of the unplug calls).

The fix is to move the ->next_rq update to when we add a request to the
rbtree. Then we remove the possibility for a request to exist in the
rbtree code, but not have ->next_rq correctly updated.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-25 08:41:48 -07:00
Jens Axboe
a993800655 cfq-iosched: fix sequential write regression
We have a 10-15% performance regression for sequential writes on TCQ/NCQ
enabled drives in 2.6.21-rcX after the CFQ update went in.  It has been
reported by Valerie Clement <valerie.clement@bull.net> and the Intel
testing folks.  The regression is because of CFQ's now more aggressive
queue control, limiting the depth available to the device.

This patches fixes that regression by allowing a greater depth when only
one queue is busy.  It has been tested to not impact sync-vs-async
workloads too much - we still do a lot better than 2.6.20.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-20 22:56:29 -07:00
Alan Stern
44ec95425c [SCSI] sg: cap reserved_size values at max_sectors
This patch (as857) modifies the SG_GET_RESERVED_SIZE and
SG_SET_RESERVED_SIZE ioctls in the sg driver, capping the values at
the device's request_queue's max_sectors value.  This will permit
cdrecord to obtain a legal value for the maximum transfer length,
fixing Bugzilla #7026.

The patch also caps the initial reserved_size value.  There's no
reason to have a reserved buffer larger than max_sectors, since it
would be impossible to use the extra space.

The corresponding ioctls in the block layer are modified similarly,
and the initial value for the reserved_size is set as large as
possible.  This will effectively make it default to max_sectors.
Note that the actual value is meaningless anyway, since block devices
don't have a reserved buffer.

Finally, the BLKSECTGET ioctl is added to sg, so that there will be a
uniform way for users to determine the actual max_sectors value for
any raw SCSI transport.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-17 18:09:56 -04:00
Andrew Morton
2363cc0264 [PATCH] remove protection of LANANA-reserved majors
Revert all this.  It can cause device-mapper to receive a different major from
earlier kernels and it turns out that the Amanda backup program (via GNU tar,
apparently) checks major numbers on files when performing incremental backups.

Which is a bit broken of Amanda (or tar), but this feature isn't important
enough to justify the churn.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04 21:12:47 -07:00
Thibaut VARENE
1ffb96c587 make elv_register() output atomic
Booting 2.6.21-rc3-g45592145 I noticed the following on one of my
machines in the bootlog:

io scheduler noop registered<6>Time: jiffies clocksource has been installed.

io scheduler deadline registered (default)

Looking at block/elevator.c, it appears that elv_register() uses two
consecutive printks in a non-atomic way, leading to the above glitch. The
attached trivial patch fixes this issue, by using a single printk.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-03-27 08:53:04 +02:00