Commit Graph

819 Commits

Author SHA1 Message Date
Dmitry Eremin-Solenikov
3320cf844f powerpc/83xx: mpc8349emitx - populate I2C busses in device tree
Add OF descriptions of EEPROM, two GPIO extenders and SPD hanging on I2C
on this board.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-12-09 15:15:36 -06:00
Dmitry Eremin-Solenikov
9174e4989e powerpc/83xx: mpc8349emitx - add gpio controller declarations
mpc8349 bears two GPIO controllers. Enable support for them.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-12-09 15:15:22 -06:00
Curtis Wald
06a5bad898 powerpc/44x: Fix PCI node in Yosemite DTS
The stanza for PCI was copied from Bamboo which has four PCI slots.  Yosemite
only has one PCI slot which is mapped to IDSEL 12, ADDR 22, IRQ2 Vector 25,
INTA.

Signed-off-by: Curtis Wald <cwald@watchguardvideo.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-12-04 07:10:26 -05:00
pbathija@amcc.com
2e991cfa9b powerpc/44x: Fix DMA ranges in DTS file for Katmai board.
Set PCI-E node inbound DMA ranges size to 4GB for correct boot up of Katmai.

Signed-off-by: Pravin Bathija <pbathija@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Acked-by: Prodyut Hazarika <phazarika@amcc.com>
Acked-by: Loc Ho <lho@amcc.com>
Acked-by: Tirumala Reddy Marri <tmarri@amcc.com>
Acked-by: Victor Gallardo <vgallardo@amcc.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-12-04 07:01:54 -05:00
Benjamin Herrenschmidt
1e43bee9c7 Merge commit 'origin/master' into next 2009-11-24 17:16:30 +11:00
Benjamin Herrenschmidt
d67ebe72c9 Merge commit 'jwb/next' into next 2009-11-24 10:02:16 +11:00
Kumar Gala
ab2f489294 powerpc/p4080: Add basic support for p4080ds platform
Add basic support for the P4080 DS reference board.  None of the data
path devices (ethernet, crypto, pme) are support at this time.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:38 -06:00
Martyn Welch
3bc265627a powerpc/86xx: Support for NVRAM on GE Fanuc's PPC9A
Add support for NVRAM on GE Fanuc's PPC9A.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:37 -06:00
Martyn Welch
9093067ad1 powerpc/86xx: Support for NVRAM on GE Fanuc's SBC310
Add support for NVRAM on GE Fanuc's SBC310.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:36 -06:00
Martyn Welch
0d81df8701 powerpc/86xx: Enable NVRAM on GE Fanuc's SBC610
This patch enables the NVRAM found on the GE Fanuc SBC610

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:35 -06:00
Linus Torvalds
cb20c28a9c Merge branch 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc
* 'hostprogs-wmissing-prototypes' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux-misc:
  Makefile: Add -Wmising-prototypes to HOSTCFLAGS
  oss: Mark loadhex static in hex2hex.c
  dtc: Mark various internal functions static
  dtc: Set "noinput" in the lexer to avoid an unused function
  drm: radeon: Mark several functions static in mkregtable
  arch/sparc/boot/*.c: Mark various internal functions static
  arch/powerpc/boot/addRamDisk.c: Mark several internal functions static
  arch/alpha/boot/tools/objstrip.c: Mark "usage" static
  Documentation/vm/page-types.c: Declare checked_open static
  genksyms: Mark is_reserved_word static
  kconfig: Mark various internal functions static
  kconfig: Make zconf.y work with current bison
2009-11-17 09:14:49 -08:00
Josh Triplett
95981e7de5 arch/powerpc/boot/addRamDisk.c: Mark several internal functions static
Nothing outside of arch/powerpc/boot/addRamDisk.c references the
functions "get4k", "put4k", or "death".

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-11-15 15:01:39 -08:00
Anton Vorontsov
1f8a25d4a4 powerpc/83xx: Add power management support for MPC83xx QE boards
Simply add power management controller nodes and sleep properties.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:31 -06:00
Anton Vorontsov
8c68e2f788 powerpc/86xx: Add power management support for MPC8610HPCD boards
This patch adds needed nodes and properties to support suspend/resume
on the MPC8610HPCD boards.

There is a dedicated switch (SW9) that is used to wake up the boards.
By default the SW9 button is routed to IRQ8, but could be re-routed
(via PIXIS) to sreset.

With 'no_console_suspend' kernel command line argument specified, the
board is also able to wakeup upon serial port input.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com> [dts]
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:30 -06:00
Anton Vorontsov
3cfee0aaa1 powerpc/85xx: Add power management support for MPC85xxMDS boards
- Add power management controller nodes;
- Add interrupts for RTC nodes, the RTC interrupt may be used as a
  wakeup source;
- Add sleep properties (DEVDISR bit mask) and sleep-nexus nodes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:29 -06:00
Poonam Aggrwal
52dffd7fbf powerpc/85xx: Added P1020RDB Platform support.
P1020 is another member of Freescale QorIQ series of processors.
It is an e500 based dual core SOC.
Being a scaled down version of P2020 it has following differences from P2020:
- 533MHz - 800MHz core frequency.
- 256Kbyte L2 cache
- Ethernet controllers with classification capabilities(new controller).

From board perspective P1020RDB is same as P2020RDB.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:16 -06:00
Poonam Aggrwal
dc2e673dbc powerpc/85xx: Create dts for each core in CAMP mode for P2020RDB
This patch creates the dts files for each core and splits the devices
between the two cores for P2020RDB.

core0 has memory, L2, i2c, spi, dma1, usb, eth0, eth1, crypto,
		global-util, pci0,
core1 has L2, dma2, eth0, pci1, msi.

MPIC is shared between two cores but each core will protect its
interrupts from other core by using "protected-sources" of mpic.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:12 -06:00
Anton Vorontsov
850f785a1f powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards
u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 07:18:10 -06:00
Anton Vorontsov
a070e66ae8 powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards
This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus
according to the latest HW Getting Started Guide (rev 3.3, pilot
boards), USB "POWER" GPIO polarity has changed, it is no longer
inverted.

This patch makes USB Host somewhat work on pilot boards, though
there are still some problems with determining devices speed and
long bulk transfers.

Reported-by: Liu Yu <Yu.Liu@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 07:18:08 -06:00
Paul Gortmaker
cb5485a0b9 powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields
The PCI-e addressing was originally patterned of the MPC8548CDS
which has PCI1, PCI2, and PCI-e.  Since this board only has
PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS
board.  This does that by cutting the PCI/PCI-e I/O sizes from
16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000
(the hole where PCI2 I/O would have been).

This also fixes a typo where an extra zero made an 8MB range a 128MB
range, removes the hole left by PCI2 from the aliases, and sets the
clocks to match the oscillators that are actually on the board.

With accompanying u-boot updates, PCI-e has been validated with
both a sky2 card (1148:9e00) and an e1000 card (8086:108b).

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 07:16:54 -06:00
Stefan Roese
59e1d4952d powerpc/44x: Enable 64bit (>= 4GB) memory size in Katmai dts
Additionally to increasing #size-cells to in the root node, we also
need to explicitly define the ranges property in the plb node, because
of the different #size-cells between child and parent.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-11-04 09:32:44 -05:00
Dave Mitchell
835ad8e76c powerpc/4xx: Add 16K FIFO size DTS entries on supported platforms
Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS
files where appropriate.

Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Acked-by: Victor Gallardo <vgallardo@appliedmicro.com>
Acked-by: Loc Ho <lho@appliedmicro.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-11-04 09:32:10 -05:00
Wolfram Sang
db467ebd1f powerpc/boot/dts: drop obsolete 'fsl5200-clocking'
The 'fsl5200-clocking'-property was dropped since
0d1cde2358. Remove all occurences
in dts-files.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:58:27 -06:00
Heiko Schocher
830cb6fafc mpc5200: support for the MAN mpc5200 based board mucmc52
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:33:24 -06:00
Heiko Schocher
371bc96b89 mpc5200: support for the MAN mpc5200 based board uc101
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:29:32 -06:00
Linus Torvalds
c37efa9325 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (30 commits)
  Use macros for .data.page_aligned section.
  Use macros for .bss.page_aligned section.
  Use new __init_task_data macro in arch init_task.c files.
  kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts.
  arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
  kbuild: add static to prototypes
  kbuild: fail build if recordmcount.pl fails
  kbuild: set -fconserve-stack option for gcc 4.5
  kbuild: echo the record_mcount command
  gconfig: disable "typeahead find" search in treeviews
  kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling
  checkincludes.pl: add option to remove duplicates in place
  markup_oops: use modinfo to avoid confusion with underscored module names
  checkincludes.pl: provide usage helper
  checkincludes.pl: close file as soon as we're done with it
  ctags: usability fix
  kernel hacking: move STRIP_ASM_SYMS from General
  gitignore usr/initramfs_data.cpio.bz2 and usr/initramfs_data.cpio.lzma
  kbuild: Check if linker supports the -X option
  kbuild: introduce ld-option
  ...

Fix trivial conflict in scripts/basic/fixdep.c
2009-09-23 15:37:02 -07:00
Anton Vorontsov
50dfe70fe9 powerpc: introduce and document sdhci,wp-inverted property for eSDHC
eSDHC block in MPC837x SOCs reports inverted write-protect state, soon
sdhci-of driver will look for sdhci,wp-inverted properties to decide
whether apply a specific quirk.

So, document the property and add it to device tree source files.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:37 -07:00
Sam Ravnborg
caa27b66bd kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:18:14 +02:00
Tiejun Chen
c5b20d3926 powerpc/405ex: support cuImage via included dtb
To support cuImage, we need to initialize the required sections and
ensure that it is built.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 09:23:22 -04:00
Tiejun Chen
0484c1df47 powerpc/405ex: provide necessary fixup function to support cuImage
For cuImage format it's necessary to provide clock fixups since u-boot will
not pass necessary clock frequency into the dtb included into cuImage so we
implement the clock fixups as defined in the technical documentation for the
board and update header file with the basic register definitions.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 09:20:55 -04:00
Solomon Peachy
0cdf50a7c6 powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by: Solomon Peachy <solomon@linux-wlan.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 09:15:51 -04:00
fkan@amcc.com
c9f75093a4 powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation
board.

Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Acked-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 08:24:15 -04:00
Stefan Roese
f661be6c8a powerpc/44x: Update Arches dts
This patch adds some nodes to the AMCC Arches dts:

- L2 cache support
- NOR FLASH mapping with default partitioning
- I2C HWMON device (AD7414)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 08:24:14 -04:00
Anton Vorontsov
9b9d401b8d powerpc/85xx: Add QE USB support for MPC8569E-MDS boards
- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:44:10 -05:00
Anton Vorontsov
818fcac554 powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards
- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:44:06 -05:00
Anton Vorontsov
ec80fb2d89 powerpc/85xx: Add eSDHC support for MPC8536DS boards
This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:43:58 -05:00
Paul Gortmaker
c9c419773d powerpc/85xx: sbc8560 - remove "has-rstcr" from global utilities block
The earlier mpc8560 CPUs don't have the RSTCR at 0xe00b0
in the GUTS.  The generic reboot code uses this tag to
determine if it should be using the RSTCR for reboot, so
remove it from the board definition.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:14 -05:00
Liang Li
58dfc497b9 powerpc/83xx: Fix incorrect PCI interrupt map in SBC834x DTS
Allows interrupts to occur on the sbc834x. Currently PCI devices
get assigned an incorrect IRQ and so the interrupt count never
increases. This was tested with the 82546GB based dual port E1000
PCI-X NIC which uses two distinct IRQ lines on the one card.

root@localhost:/root> cat /proc/interrupts | grep eth
17:         78   IPIC   Level     eth1
48:      27121   IPIC   Level     eth0

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:09 -05:00
Liang Li
31ff09b7a6 powerpc/83xx: Add localbus node and MTD partitions for SBC834x
There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x
local bus, so add a localbus node in DTS with MTD partitions.

The recent U-boot commit fe613cdd4eb moves u-boot to the beginning
of flash, hence the legacy label on the partition at the end of flash.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:08 -05:00
Liang Li
4de124446b powerpc/83xx: Remove second USB node from SBC834x DTS
Since only one of the SoC USB devices is brought out to a physical
connector on the board, remove the 2nd (USB-DR) node from the DTS.
Having it present and USB enabled will cause a hang at boot.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:07 -05:00
Poonam Aggrwal
fb8e3e1fe1 powerpc/85xx: Add support for P2020RDB board
Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
	- DDR
	  DDR2 1G
	- NOR Flash
	  16MByte
	- NAND Flash
	  32MByte
	- 3 Ethernet interfaces
	  1) etSEC1
		- RGMII
		- connected to a 5 port Vitesse Switch(VSC7385)
		- Switch is memory mapped through eLBC interface(CS#2)
		- IRQ1
	  2) etSEC2
		- SGMII
		- connected to VSC8221
		- IRQ2
	  3) etSEC3
		- RGMII
		- connected to VSC8641
		- IRQ3
	- 2 1X PCIe interfaces
	- SD/MMC ,USB
	- SPI EEPROM
	- Serial I2C EEPROM

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:06 -05:00
Stephen Rothwell
3c15a68880 powerpc: use consistent types in mktree
gcc v4.4 currently produces this build warning:

arch/powerpc/boot/mktree.c: In function 'main':
arch/powerpc/boot/mktree.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules

tmpbuf is only used as an array of unsigned ints, so declare it that way.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:29:30 +10:00
Martyn Welch
433abcdf32 powerpc/86xx: Update GE Fanuc sbc310 DTS
Update GE Fanuc DTS to match the alterations suggested during the merge of
the ppc9a DTS in commit 740d36ae63

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:58 +10:00
Martyn Welch
8798b9df26 powerpc/86xx: Enable XMC site on GE Fanuc SBC310
This patch enables the XMC (PCIe daughter card) site on the SBC310.
STG enter the description for the patch above.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:58 +10:00
Anton Vorontsov
89f3729642 powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boards
Actually, the support is already there, but it requires newer U-Boots
(to fill-in clock-frequency, and setup pin multiplexing).

Though, it appears that on RDB boards USBB pins aren't multiplexed
between USB and eSDHC (unlike MDS boards, where USB and eSDHC share
pctl and pwrfault pins).

So, for RDB boards we can safely setup pinmux and manually fill-in
clock-frequency, thus making eSDHC work even with older u-boots.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:51 +10:00
Anton Vorontsov
c69328d4b9 powerpc/85xx: Add support for I2C EEPROMs on MPC8548CDS boards
This patch simply adds four eeprom nodes to MPC8548CDS' device tree.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:47 +10:00
Anton Vorontsov
fda4bd9bac powerpc/83xx: Add support for MPC8377E-WLAN boards
MPC8377E-WLAN are basically RDB boards except:

- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:43 +10:00
Heiko Schocher
9239c89bc9 powerpc/82xx: mgcoge - updates for 2.6.32
- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattform code

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:30 +10:00
Kumar Gala
b6c316a1f6 powerpc/85xx: Added 36-bit physical device tree for mpc8536ds board
Added a device tree that should be similiar to mpc8536ds.dtb except
the physical addresses for all IO are above the 4G boundary.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:26:06 +10:00
Kumar Gala
189339d47d powerpc/85xx: Move mpc8536ds.dts to address-cells/size-cells = <2>
Change the top-level #address-cells and #size-cells to <2> so the
mpc8536ds.dts is easier to deal with both a true 32-bit physical
or 36-bit physical address space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:25:57 +10:00