Commit Graph

85 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
fcaf71fd51 Driver core: convert mmc code to use struct device
Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:52:00 -08:00
Pierre Ossman
7ccd266e67 mmc: Support for high speed SD cards
Modern SD cards support a clock speed of 50 MHz. Make sure we test for
this capability and do the song and dance required to activate it.

Activating high speed support actually modifies the TRAN_SPEED field
of the CSD. But as the spec says that the cards must report 50 MHz,
we might as well skip re-reading the CSD.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-01 18:53:37 +01:00
Philip Langdale
e45a1bd20f mmc: Add support for mmc v4 wide-bus modes
This change adds support for the mmc4 4-bit wide-bus mode.

The mmc4 spec defines 8-bit and 4-bit transfer modes. As we do not support
any 8-bit hardware, this patch only adds support for the 4-bit mode, but
it can easily be built upon when the time comes.

The 4-bit mode is electrically compatible with SD's 4-bit mode but the
procedure for turning it on is different. This patch implements only
the essential parts of the procedure as defined by the spec. Two additional
steps are recommended but not compulsory. I am documenting them here so
that there's a record.

1) A bus-test mechanism is implemented using dedicated mmc commands which allow
for testing the functionality of the data bus at the electrical level. This is
pretty paranoid and they way the commands work is not compatible with the mmc
subsystem (they don't set valid CRC values).

2) MMC v4 cards can indicate they would like to draw more than the default
amount of current in wide-bus modes. We currently will never switch the card
into a higher draw mode. Supposedly, allowing the card to draw more current
will let it perform better, but the specs seem to indicate that the card will
function correctly without the mode change. Empirical testing supports this
interpretation.

Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-01 18:22:44 +01:00
Philip Langdale
bce40a36de [PATCH] mmc: Add support for mmc v4 high speed mode
This adds support for the high-speed modes defined by mmc v4
(assuming the host controller is up to it). On a TI sdhci controller,
it improves read speed from 1.3MBps to 2.3MBps. The TI controller can
only go up to 24MHz, but everything helps. Another person has taken
this basic patch and used it on a Nokia 770 to get a bigger boost
because that controller can run at 48MHZ.

Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-01 18:21:32 +01:00
David Howells
c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Pierre Ossman
ec5a19dd93 [PATCH] mmc: multi sector write transfers
SD cards extend the protocol by allowing the host to query a card how many
blocks were successfully stored on the medium.  This allows us to safely write
chunks of blocks at once.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:41 -07:00
Russell King
42431acbac [MMC] MMC_CAP_BYTEBLOCK flag for non-log2 block sizes capable hosts
Some MMC hosts can only handle log2 block sizes.  Unfortunately,
the MMC password support needs to be able to send non-log2 block
sizes.  Provide a capability so that the MMC password support can
decide whether it should use this support or not.

The unfortunate side effect of this host limitation is that any
MMC card protected by a password which is not a log2 block size
can not be accessed on a host which only allows a log2 block size.

This change just adds the flag.  The MMC password support code
needs updating to use it (if and when it is finally submitted.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-24 10:44:09 +01:00
Russell King
db53f28b3a [MMC] Add multi block-write capability
Add a capability flag for drivers to set when they can perform multi-
block transfers to cards _and_ correctly report the number of bytes
transferred should an error occur.

The last point is very important - if a driver reports more bytes than
were actually accepted by the card and an error occurs, there is the
possibility for data loss.

Pierre Ossman provided the patch for wbsd and sdhci.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 11:57:49 +01:00
Russell King
132919ba80 [MMC] Remove data->blksz_bits member
data->blksz_bits is unused now - remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 11:54:04 +01:00
Russell King
d773d72551 [MMC] Cleanup 385e3227d4
Rather than having two places which independently calculate the
timeout for data transfers, make it a library function instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2006-09-07 15:57:12 +01:00
David Brownell
f57b225e43 [MMC] constify mmc_host_ops
Let drivers constify MMC host method operations tables,
moving them from ".data" to ".rodata".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-07 13:18:40 +01:00
Pavel Pisa
2c171bf134 [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups
Patch from Pavel Pisa

There has been problems that for some paths that clock are not stopped
during new command programming and initiation. Result is issuing
of incorrect command to the card. Some other problems are cleaned too.
Noisy report of known ERRATUM #4 has been suppressed.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-19 21:48:03 +01:00
Russell King
37be4e7809 [MMC] extend data timeout for writes
The CSD contains a "read2write factor" which determines the multiplier to
be applied to the read timeout to obtain the write timeout.  We were
ignoring this parameter, resulting in the possibility for writes being
timed out too early.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-02 17:24:59 +01:00
Russell King
5bd546aa78 [MMC] Fix mmc_cmd_type() mask
It's MMC_CMD_MASK not MMC_CMD_TYPE.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22 09:32:46 +00:00
Russell King
e92251762d [MMC] Add MMC command type flags
Some hosts need to know the command type, so pass it via a set of
flags in cmd->flags.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-02 12:23:12 +00:00
Pierre Ossman
7225b3fd0b [MMC] Indicate that R1/R1b contains command opcode
Some controllers actually check the first byte of the response (most
don't).  This byte contains the command opcode for R1/R1b and all 1:s
for other types. The difference must be indicated to the controller
so it knows which reply to expect.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-01-09 22:51:46 +00:00
Russell King
788ee7b098 [MMC] Add DATA_MULTI flag
Some hosts need to know that a transfer will be multi-block.
Add a data flag to indicate multiple data block transfers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 21:12:17 +00:00
Russell King
ce11a161c1 [MMC] Fix missing ','
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 12:40:39 +00:00
Russell King
a6f6c96b65 [MMC] Improve MMC card block size selection
Select a block size for IO based on the read and write block size
combinations, and whether the card supports partial block reads
and/or partial block writes.

If we are able to satisfy block reads but not block writes, mark
the device read only.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03 22:38:44 +00:00
Pierre Ossman
24117defab [MMC] Fix protocol errors
A review against MMC/SD specifications found some errors in the current
implementation.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28 21:00:29 +00:00
Erik Hovland
8573b80f02 [ARM] 3031/1: fix typos in comments of mmc.h
Patch from Erik Hovland

I noticed that the same typo (i before c in associated) showed up twice
in the file kernel/include/linux/mmc/mmc.h.

This patch fixes both of the instances I found with this mistake. The
typos are in comments and should have no affect on working code.

E

Signed-off-by: Erik Hovland <erik@hovland.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 16:28:04 +01:00
Russell King
01357dcac6 [MMC] Ensure correct mmc_priv() behaviour
mmc_priv() has some nasty effects if the wrong pointer type is
passed to it.  Introduce type checking, which also means we get
the right type.  Also add an additional member to mmc_host which
is used to align host-private data appropriately.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08 22:46:00 +01:00
Richard Purdie
8dc003359c [MMC] Allow detection/removal to be delayed
Change mmc_detect_change() to take a delay argument such that
the detection of card insertions and removals can be delayed
according to the requirements of the host driver or platform.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08 17:53:01 +01:00
Pierre Ossman
f218278a45 [PATCH] sd: SD 4-bit bus
Infrastructure for 4-bit bus transfers with SD cards.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:51 -07:00
Pierre Ossman
b57c43ad81 [PATCH] sd: SCR register
Read the SD specific SCR register from the card.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:50 -07:00
Pierre Ossman
a00fc09029 [PATCH] sd: read-only switch
Support for the read-only switch on SD cards which must be enforced by the
host.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:50 -07:00
Pierre Ossman
335eadf2ef [PATCH] sd: initialize SD cards
Support for the Secure Digital protocol in the MMC layer.

A summary of the legal issues surrounding SD cards, as understood by yours
truly:

Members of the Secure Digital Association, hereafter SDA, are required to sign
a NDA[1] before given access to any specifications.  It has been speculated
that including an SD implementation would forbid these members to redistribute
Linux.  This is the basic problem with SD support so it is unclear if it even
is a problem since it has no effect on those of us that aren't members.

The SDA doesn't seem to enforce these rules though since the patches included
here are based on documentation made public by some of the members.  The most
complete specs[2] are actually released by Sandisk, one of the founding
companies of the SDA.

Because of this the NDA is considered a non-issue by most involved in the
discussions concerning these patches.  It might be that the SDA is only
interested in protecting the so called "secure" bits of SD, which so far
hasn't been found in any public spec.  (The card is split into two sections,
one "normal" and one "secure" which has an access scheme similar to TPM:s).

(As a side note, Microsoft is working to make things easier for us since they
want to be able to include the source code for a SD driver in one of their
development kits.  HP is making sure that the new NDA will allow a Linux
implementation.  So far only the SDIO specs have been opened up[3].  More will
hopefully follow.)

 [1] http://www.sdcard.org/membership/images/ippolicy.pdf
 [2] http://www.sandisk.com/pdf/oem/ProdManualSDCardv1.9.pdf
 [3] http://www.sdcard.org/sdio/Simplified%20SDIO%20Card%20Specification.pdf

This patch contains the central parts of the SD support.  If no MMC cards are
found on a bus then the MMC layer proceeds looking for SD cards.  Helper
functions are extended to handle the special needs of SD cards.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:50 -07:00
Pierre Ossman
865e9f13c9 [MMC] ios for mmc chip select
Adds a new ios for setting the chip select pin on MMC cards. Needed on
SD controllers which use this pin for other things and therefore cannot
have it pulled high at all times.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-03 16:45:02 +01:00
Russell King
dce7737718 [MMC] Use an IDR for host name indicies
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-19 09:42:52 +01:00
Russell King
1ad434d7cf [MMC] Use class device name for mmc host name
There's no point in having the host name duplicated between
the mmc_host structure and the encapsulated class device
structure.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-19 09:42:21 +01:00
Russell King
00b137cfda [MMC] Add MMC class devices
Create a mmc_host class to allow enumeration of MMC host controllers
even though they have no card(s) inserted.

Patch based on work by Pierre Ossman.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-19 09:41:24 +01:00
Russell King
d366b64363 [MMC] Add mmc_hostname() macro
mmc_hostname() returns a pointer to the hostname for the mmc_host.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-19 09:40:08 +01:00
Pierre Ossman
912490db69 [PATCH] MMC: Proper MMC command classes support
Defines for the different command classes as defined in the MMC and SD
specifications.

Removes the check for high command classes and instead checks that the
command classes needed are present.
Previous solution killed forward compatibility at no apparent gain.

Signed-of-by: Pierre Ossman
2005-05-21 10:27:02 +01:00
Pavel Machek
3bfffd97ef [PATCH] fix u32 vs. pm_message_t in rest of the tree
This fixes u32 vs.  pm_message_t confusion in remaining places.  Fortunately
there's few of them.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:37 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00