As part of new requirement WLAN subsystem needs to perform thermal
mitigation action as per the thermal state of the device. The
wifi hal sends vendor command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
with the thermal level parameter and wlan host performs the required
appropriate action. wlan host driver maps the thermal level to
corresponding duty cycle off percent value and duty cycle value,
send WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW
change-ID: Ib2152bd4349786d1624eca480790e772414f9df6
CRs-Fixed: 2613529
Pass soc objmgr from hdd context to hif context
to retrieve INI parameters to be used in hif
layer.
Change-Id: I0ad4573fecba0fc78968145394683057d09da312
CRs-Fixed: 2598759
If the flag is enabled drop the packet if msdu_done bit
is not set while processing rxdma err frames. This is
not expected while reaping WBM RX release ring.
Change-Id: Ic8a09ba5a6952510e82a209d6ef609343a9bc09a
CRs-Fixed: 2608661
Fix insmod Genoa wlan module failure for:
wlan: Unknown symbol wlan_set_vdev_crypto_prarams_from_ie.
wlan_set_vdev_crypto_prarams_from_ie is defined in
wlan_crypto_global_api.c
UMAC_CRYPTO_OBJS := $(UMAC_CRYPTO_CORE_DIR)/
wlan_crypto_global_api.o \
ifeq ($(CONFIG_CRYPTO_COMPONENT), y)
OBJS += $(UMAC_CRYPTO_OBJS)
endif
The crypto component is always required after convergence
between WIN/MCC, hence just unconditonally set
CONFIG_CRYPTO_COMPONENT := y in Kbuild.
Remove CONFIG_CRYPTO_COMPONENT := y in defconfig of each wifi
chip: default_defconfig, qca6174_defconfig, qca6390_defconfig.
Change-Id: Id0abe80673d59d9274401f1304b5ce1d906624eb
CRs-Fixed: 2596124
CONFIG_CRYPTO_COMPONENT is supposed to be enabled for all devices,
so enable it for Genoa as well.
Change-Id: Icf37a9052c329e362460342fe44d8fe70c5bb1ed
CRs-fixed: 2597797
Enable DP Bus Bandwidth feature in WHUNT config, this helps to
execute and detect issues in Bus Bandwidth feature code path.
Change-Id: Id4376236b77661519667c40c427c50af436a9dc2
CRs-Fixed: 2597300
When CONFIG_WLAN_DEBUGFS is disabled, source files depending on debugfs
will not be compiled.
CRs-Fixed: 2589891
Change-Id: I43496fe1fffc83c26d810b2a06b8c0f45edfc1c8
The PKTLOG function broken with Genoa caused by
2857937, so add the needed macro back to avoid
crash issue while PKTLOG enable.
Change-Id: I3f9621830dcad415868fdee5fbeef8fdb86604b0
When radar is injected at +/-30MHz separation from center frequency
in VHT 80MHz mode incorrect pulse duration is reported in the radar
summary reports and lead to decreased radar probablity detection.
Fix the issue by capturing pulses with such characteristics and
modify them to fit within the valid phyerror pulse duration range.
Change-Id: Ic6314a372d6909448fbe4eb694c41736d1719712
CRs-Fixed: 2577632
Fix compile issues when some features are disabled, the features are:
BUILD_DEBUG_VERSION
CONFIG_CP_STATS
CONFIG_HOST_OPCLASS
CONFIG_FEATURE_ROAM_DEBUG
There are some other features depends on each other, so enabled features to
qcs40x.snoc.perf_defconfig, the features are:
CONFIG_WLAN_FEATURE_FILS
CONFIG_WMI_ROAM_SUPPORT
CONFIG_WMI_STA_SUPPORT
CONFIG_REG_CLIENT
CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH
CONFIG_WMI_CONCURRENCY_SUPPORT
CONFIG_LL_DP_SUPPORT
Change-Id: I6fa1eacb79576a955e593dbb9ac52083742275e3
CRs-Fixed: 2354496
Add credit tracking for HL Data Path in DPTRACE.
Also update proto_bitmap to dynamically enable/disable
credit tracking.
Change-Id: Idd9216b634586f3a81c2194ea4bd2122a472154a
CRs-Fixed: 2574053
Add configuration CONFIG_WLAN_SYNC_TSF_TIMER and macro
WLAN_FEATURE_TSF_TIMER_SYNC to capture and get the tsf
from firmware.
Change-Id: I62298791cbafed84f1d23f1a2ecb5c2835dcd137
CRs-Fixed: 2564860
Add logic to queue and bundle packets before
giving it to scheduler to ensure predictive HTC
bundling for improvement in TX throughput.
Change-Id: Ib00135ca59b4c5f0f05edc93dca115bf17174a36
CRs-Fixed: 2561671
Define debugfs node in driver to
export MIB counters to user app.
Define macro WLAN_FEATURE_MIB_STATS for this
feature that gets MIB statistics from fw.
Change-Id: Icae8826309094d17e8f6d4503f617a3a7116d3c9
CRs-Fixed: 2548241
The ANI level determines how well the device is coping with interference
in the wireless environment. Add support in the driver to query the ANI
level from the firmware and populate it for userspace entities to use.
Change-Id: I54934f670aa11737e11eca4d64e12f9dffb4f430
CRs-Fixed: 2554674
Enable Force wake feature through Kbuild
to access address range greater than BAR+4K
at runtime.
Change-Id: Ibe3c3b9b765c256493b1d5f9258e462760d45dc6
CRs-Fixed: 2557978
Enable ENABLE_QDF_PTR_HASH_DEBUG macro for Def build only to debug
qdf_ptr_hash related issue.
Change-Id: Ifa35afa716333d3bf777558e15d7b0295abce72c
CRs-Fixed: 2566025
1. Add whunt_defconfig for whunt target. New Features can be
enabled in it to run related whunt test cases.
2. Enable CONFIG_BAND_6GHZ and CONFIG_WLAN_FEATURE_11AX
for whunt 6GHz test.
Change-Id: I63b84086cbf28e1fe3ab44bedb4977e73212af29
CRs-Fixed: 2550575
In the REO status callback function for RX tid delete if the
cache flush cmd is not sent successfully to REO, add the REO
descriptor back to the free desc list and defer the deletion
to the callback function.
Changes are made under MCL feature flag REO_DESC_DEFER_FREE.
Change-Id: Ib6c077ebf763ab8feb4c45c17ff37d03252fe093
CRs-Fixed: 2558052
Make tx resource hi/low threshold configurable through
config files and update hi threashold from 7.5% to 8%.
Change-Id: I2e52b7910caedf6e0af24242b79e1e9d42c6b85b
CRs-Fixed: 2548100
Increase value of AST skid limit for QCN7605 to avoid
peer create failure in FW in case of AST hash collision.
Change-Id: If931229d3b1458556a6e5c1023fb646b7274bedd
CRs-Fixed: 2517716
CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY may be not set yes, if only
CONFIG_ROME_IF is set pci in external file. Because it is set yes
only when CONFIG_HIF_PCI set yes, however, CONFIG_HIF_PCI set yes
after it. For example, in file default_defconfig, CONFIG_HIF_PCI
set to yes on line 465, however line 311 checking CONFIG_HIF_PCI
to enable CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY. So, line 314 can't
be called, CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY is not set yes.
Change "ifeq ($(CONFIG_HIF_PCI), y)" to "ifeq ($(CONFIG_ROME_IF),pci)"
to avoid it.
Change-Id: Id324cdb99d6ee2d20bc00e698836c3ea4c5e0a05
CRs-Fixed: 2496110
The functions hdd_sysfs_create_adapter_root_obj() and
hdd_sysfs_destroy_adapter_root_obj() are declared but not
implemented if CONFIG_WLAN_SYSFS is not defined but
CONFIG_FEATURE_BECN_STATS is defined. Do not enable
CONFIG_FEATURE_BECN_STATS if CONFIG_WLAN_SYSFS is not defined.
Change-Id: Iccf0ea4519416266e43533cfd34c9a3085820bee
CRs-Fixed: 2549288
Implement metering stats quota to support ipa offload sta plus
sap wifi sharing use cases.
Change-Id: Ic9d5ad817ffb4d671a43f3f3aebb2d8cce293873
CRs-Fixed: 2517696
Make HTC_MAX_MSG_PER_BUNDLE_TX configurable through config files.
Also set HTC_MAX_MSG_PER_BUNDLE_TX to 48 for QCN7605 usb.
Change-Id: If6616251f536c35db087d5623a81c8a3f02da725
CRs-Fixed: 2544743
On HST, only enable LFR3
On Rome, only enable LFR2
This change is for auto platforms
Change-Id: I67bd5877060621e756668e925031fd134bc1a0c2
CRs-Fixed: 2544840
IBSS code is placed under "QCA_IBSS_SUPPORT" feature flag. IBSS code is
disabled and to enable it define "QCA_IBSS_SUPPORT" in default_defconfig.
ex. CONFIG_QCA_IBSS_SUPPORT := y
Change-Id: I08619dbed4661d9fc132adbcd1de2cd4470a2737
CRs-Fixed: 2542078
Enable direct buffer rx component in Kbuild since spectral scan gen3
based on this feature.
Change-Id: I8d44b35ca0d334917b3c052cc8ab4e47db34e4a1
CRs-Fixed: 2505676
