Commit Graph

322 Commits

Author SHA1 Message Date
Shirley Ma
bc7b3a36ba IPoIB: Handle 4K IB MTU for UD (datagram) mode
This patch enables IPoIB to use 4K UD messages (when the underlying
device and fabrics support a 4K MTU) by using two scatter buffers when
PAGE_SIZE is less than or equal to thhe HCA IB MTU size.  The first
buffer is for IPoIB header + GRH header, and the second buffer is the
IPoIB payload, which is 4K-4.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23 11:55:45 -07:00
Tony Jones
ee959b00c3 SCSI: convert struct class_device to struct device
It's big, but there doesn't seem to be a way to split it up smaller...

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:33 -07:00
Greg Kroah-Hartman
0532193746 IB: rename "dev" to "srp_dev" in srp_host structure
This sets us up to be able to convert the srp_host to use a struct
device instead of a class_device.

Based on a original patch from Tony Jones, but split up into this piece
by Greg.

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:30 -07:00
Erez Zilber
0a22ab92f5 IB/iser: Don't change itt endianness
The itt field in struct iscsi_data is not defined with any particular
endianness.  open-iscsi should use it as-is without byte-swapping it.
This fixes sparse warnings coming from doing ntohl(hdr->itt).

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00
Roland Dreier
9fdd5e5bf6 IPoIB: Handle case when P_Key is deleted and re-added at same index
If a P_Key is deleted and then re-added at the same index, then IPoIB
gets confused because __ipoib_ib_dev_flush() only checks whether the
index is the same without checking whether the P_Key was present, so
the interface is stopped when the P_Key is deleted, but the event when
the P_Key is re-added gets ignored and the interface never gets
restarted.

Also, switch to using ib_find_pkey() instead of ib_find_cached_pkey()
everywhere in IPoIB, since none of the places that look for P_Keys are
in a fast path or in non-sleeping context, and in general we want to
kill off the whole caching infrastructure eventually.  This also fixes
consistency problems caused because some IPoIB queries were cached and
some were uncached during the window where the cache was not updated.

Thanks to Venkata Subramonyam <vsubramo@cisco.com> for debugging this
problem and testing this fix.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00
Erez Zilber
d97c51707d IB/iser: Release connection resources on RDMA_CM_EVENT_DEVICE_REMOVAL event
When a RDMA_CM_EVENT_DEVICE_REMOVAL event is raised, iSER should
release the connection resources.

This is necessary when the IB HCA module is unloaded while open-iscsi
is still running.  Currently, iSER just BUG()s.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:35 -07:00
Eli Cohen
28d52b3cd8 IPoIB: Support modifying IPoIB CQ event moderation
This can be used to tune at run time the parameters controlling the
event (interrupt) generation rate and thus reduce the overhead
incurred by handling interrupts resulting in better throughput.  Since
IPoIB uses a single CQ for both RX and TX, RX is chosen to dictate
configuration for both RX and TX.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:33 -07:00
Eli Cohen
82c24c18af IPoIB: Add basic ethtool support
Just add the infrastructure so we can add functionality later.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:32 -07:00
Eli Cohen
40ca1988e0 IPoIB: Add LSO support
For HCAs that support TCP segmentation offload (IB_DEVICE_UD_TSO), set
NETIF_F_TSO and use HW LSO to offload TCP segmentation.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:27 -07:00
Robert P. J. Day
157de22946 IB: Use shorter list_splice_init() for brevity
Convert list_splice() + INIT_LIST_HEAD() to the equivalent list_splice_init()

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:09:26 -07:00
David Dillow
1e89a1946c IB/srp: Enforce protocol limit on srp_sg_tablesize
The current SRP initiator will allow unlimited s/g entries in the
indirect descriptors lists, but the entry count field in the SRP_CMD
request is 8 bits, so setting srp_sg_tablesize too large will open the
possibility of wrapping the count and generating invalid requests.

Clamp srp_sg_tablesize to the protocol limits to prevent surprises.

Reported by Martin W. Schlining III <mschlining@datadirectnet.com>.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:12 -07:00
Eli Cohen
6046136c74 IPoIB: Use checksum offload support if available
For HCAs that support checksum offload (ie that set IB_DEVICE_UD_IP_CSUM
in the device capabilities flags), have IPoIB set NETIF_F_IP_CSUM and
use the HCA to generate and verify IP checksums.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:10 -07:00
Roland Dreier
10313cbb92 IPoIB: Allocate priv->tx_ring with vmalloc()
Commit 7143740d ("IPoIB: Add send gather support") made struct
ipoib_tx_buf significantly larger, since the mapping member changed
from a single u64 to an array with MAX_SKB_FRAGS + 1 entries.  This
means that allocating tx_rings with kzalloc() may fail because there
is not enough contiguous memory for the new, much bigger size.  Fix
this regression by allocating the rings with vmalloc() instead.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-03-12 07:51:03 -07:00
Roland Dreier
4200406b8f IPoIB/cm: Set tx_wr.num_sge in connected mode post_send()
Commit 7143740d ("IPoIB: Add send gather support") made it possible
for tx_wr.num_sge to be != 1 -- this happens if send gather support is
enabled.  However, the code in the connected mode post_send() function
assumes the old invariant, namely that tx_wr.num_sge is always 1.  Fix
this by explicitly setting tx_wr.num_sge to 1 in the CM post_send().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-03-11 18:35:20 -07:00
Or Gerlitz
b3e2749bf3 IPoIB: Don't drop multicast sends when they can be queued
When set_multicast_list() is called the multicast task is restarted
and the IPOIB_MCAST_STARTED bit is cleared.  As a result for some
window of time, multicast packets are not transmitted nor queued but
rather dropped by ipoib_mcast_send().  These dropped packets are
painful in two cases:

 - bonding fail-over which both calls set_multicast_list() on the new
   active slave and sends Gratuitous ARP through that slave.

 - IP_DROP_MEMBERSHIP code which both calls set_multicast_list() on the
   device and issues IGMP leave.

In both these cases, depending on the scheduling of the IPoIB
multicast task, the packets would be dropped.  As a result, in the
bonding case, the failover would not be detected by the peers until
their neighbour is renewed the neighbour (which takes a few tens of
seconds).  In the IGMP case, the IP router doesn't get an IGMP leave
and would only learn on that from further probes on the group (also a
delay of at least a few tens of seconds).

Fix this by allowing transmission (or queuing) depending on the
IPOIB_FLAG_OPER_UP flag instead of the IPOIB_MCAST_STARTED flag.

Signed-off-by: Olga Shern <olgas@voltaire.com>
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-03-11 14:12:03 -07:00
Arne Redlich
d33ed425c6 IB/iser: Handle iser_device allocation error gracefully
"iser_device" allocation failure is "handled" with a BUG_ON() right
before dereferencing the NULL-pointer - fix this!

Signed-off-by: Arne Redlich <arne.redlich@xiranet.com>
Signed-off-by: Erez Zilber <erezz@voltaire.com>
2008-03-10 21:17:51 -07:00
Arne Redlich
9a378270c0 IB/iser: Fix list iteration bug
The iteration through the list of "iser_device"s during device
lookup/creation is broken -- it might result in an infinite loop if
more than one HCA is used with iSER.  Fix this by using
list_for_each_entry() instead of the open-coded flawed list iteration
code.

Signed-off-by: Arne Redlich <arne.redlich@xiranet.com>
Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-03-10 21:15:49 -07:00
Pradeep Satyanarayana
ec229e5e81 IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times out
Commit efcd9971 ("IPoIB/cm: Factor out ipoib_cm_free_rx_reap_list()")
introduced a bug in ipoib_cm_dev_stop() when the receive drain times
out.  In that case, the function moves all the pending rx stuff into a
private list but then calls ipoib_cm_free_rx_reap_list(), which
handles a different list.

Fix this by moving everything to the rx_reap_list that will actually
get freed up.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=906>.

Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-19 10:25:11 -08:00
Eli Cohen
a9d1884925 IPoIB: Remove unused struct ipoib_cm_tx.ibwc member
struct ipoib_cm_tx.ibwc is unused since commit 1b524963 ("IPoIB/cm:
Use common CQ for CM send completions"), so remove it.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
2008-02-14 10:30:50 -08:00
Jack Morgenstein
167c42655c IPoIB: On P_Key change event, reset state properly
In P_Key event handling, if the old P_Key is no longer available, the
driver must call ipoib_ib_dev_stop() -- just as it does when the P_Key
is still available (see procedure __ipoib_ib_dev_flush()).

When a P_Key becomes available, the driver will perform ipoib_open(),
which assumes that the QP is in RESET, the cm_id has been
destroyed/deleted, etc.  If ipoib_ib_dev_stop() is not called as
described above, then these assumptions will be false, and the attempt
to bring the interface up will fail.

Found by Mellanox QA.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-14 10:15:06 -08:00
Eli Cohen
7143740d26 IPoIB: Add send gather support
This patch acts as a preparation for using checksum offload for IB
devices capable of inserting/verifying checksum in IP packets.  The
patch does not actaully turn on NETIF_F_SG - we defer that to the
patches adding checksum offload capabilities.

We only add support for send gathers for datagram mode, since existing
HW does not support checksum offload on connected QPs.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-08 14:32:37 -08:00
Eli Cohen
eb14032f9e IPoIB: Add high DMA feature flag
All current InfiniBand devices can handle all DMA addresses, and it's
hard to imagine anyone would be silly enough to build a new device
that couldn't.  Therefore, enable the NETIF_F_HIGHDMA feature for IPoIB.

This has no effect for no, but is needed when we enable gather/scatter
support and checksum stateless offloads.

Signed-off-by: Eli Cohen <eli@mellnaox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-08 13:39:26 -08:00
David Dillow
9fe4bcf45e IB/srp: Retry stale connections
When a host just goes away (crash, power loss, etc.) without tearing
down its IB connections, it can get stale connection errors when it
tries to reconnect to targets upon rebooting.  Retrying the connection
a few times will prevent sysadmins from playing the "which disk(s)
went missing?" game.

This would have made things slightly quicker when tracking down some
of the recent bugs, but it also helps quite a bit when you've got a
large number of targets hanging off a wedged server.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:43 -08:00
Or Gerlitz
7bc531dd88 IPoIB: Remove a misleading debug print
Commit 732a2170 ("IB/ipoib: Bound the net device to the ipoib_neigh
structue") left a misleading debug print (n->dev would be a bond
device only if boding is used).  Clean it up.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:43 -08:00
Or Gerlitz
bafff97417 IPoIB: Handle bonding failover race for connected neighbours too
Move up the code that checks for a situation where the remote GID
stored in the ipoib_neigh is different than the one present in the
neighbour (handle gratuitous ARP) or that a bonding fail over has
happened but the neighbour still has a pointer to an ipoib_neigh
created by a different device than the current slave.  This will cause
the driver to apply the check also for connected mode neighbours.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:43 -08:00
James Bottomley
d3f46f39b7 [SCSI] remove use_sg_chaining
With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-30 13:14:02 -06:00
Linus Torvalds
9b73e76f3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)
  [SCSI] usbstorage: use last_sector_bug flag universally
  [SCSI] libsas: abstract STP task status into a function
  [SCSI] ultrastor: clean up inline asm warnings
  [SCSI] aic7xxx: fix firmware build
  [SCSI] aacraid: fib context lock for management ioctls
  [SCSI] ch: remove forward declarations
  [SCSI] ch: fix device minor number management bug
  [SCSI] ch: handle class_device_create failure properly
  [SCSI] NCR5380: fix section mismatch
  [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices
  [SCSI] IB/iSER: add logical unit reset support
  [SCSI] don't use __GFP_DMA for sense buffers if not required
  [SCSI] use dynamically allocated sense buffer
  [SCSI] scsi.h: add macro for enclosure bit of inquiry data
  [SCSI] sd: add fix for devices with last sector access problems
  [SCSI] fix pcmcia compile problem
  [SCSI] aacraid: add Voodoo Lite class of cards.
  [SCSI] aacraid: add new driver features flags
  [SCSI] qla2xxx: Update version number to 8.02.00-k7.
  [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.
  ...
2008-01-25 17:19:08 -08:00
Jan Engelhardt
1cf18d5aab IPoIB: Constify seq_operations function pointer tables
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:17:46 -08:00
Krishna Kumar
48fe5e594c IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler
qdisc_run() now tests for queue_stopped() before calling
__qdisc_run(), and the same check is done in every iteration of
__qdisc_run(), so another check is not required in the driver xmit.
This means that ipoib_start_xmit() no longer needs to test
netif_queue_stopped(); the test was added to fix earlier kernels,
where the networking stack did not guarantee that the xmit method of
an LLTX driver would not be called after the queue was stopped, but
current kernels do provide this guarantee.

To validate, I put a debug in the TX_BUSY path which never hit with 64
threads running overnight exercising this code a few 100 million
times.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:17:44 -08:00
Erez Zilber
6410627eb9 IB/iser: Add change_queue_depth method
Add a .change_queue_depth handler to the scsi_host_template in the
iSER driver.  iscsi_change_queue_depth was added to iscsi_tcp in order
to solve the problem of queue depth which was too high for some
targets.  It is also applicable for iSER.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:43 -08:00
Erez Zilber
a4ef1451df IB/iser: Print information about unhandled RDMA CM events
Some RDMA CM events are not supported or not handled in iSER.
This patch adds some info (printk) for the user about them.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:43 -08:00
David Dillow
7aa54bd730 IB/srp: Add identifying information to log messages
When you have multiple targets, it gets really confusing when you try
to track down who did a reset when there is no identifying information
in the log message, especially when the same extension ID is mapped
through two different local IB ports.  So, add an identifier that can
be used to track back to which local IB port/remote target pair is the
one having problems.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Acked-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:38 -08:00
Pradeep Satyanarayana
586a693448 IPoIB/CM: Enable SRQ support on HCAs that support fewer than 16 SG entries
Some HCAs (such as ehca2) support SRQ, but only support fewer than 16 SG
entries for SRQs.  Currently IPoIB/CM implicitly assumes all HCAs will
support 16 SG entries for SRQs (to handle a 64K MTU with 4K pages). This
patch removes that restriction by limiting the maximum MTU in connected
mode to what the maximum number of SRQ SG entries allows.

This patch addresses <https://bugs.openfabrics.org/show_bug.cgi?id=728>

Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:37 -08:00
David Dillow
fff09a8e6e IB/srp: Enable SG list chaining
By default, the SCSI mid-layer seems to send down 512KB requests
(sg_tablesize = 256), with some requests occasionally combined. By
allowing the mid-layer to chain requests, we can easily grow to 1024KB
or larger -- I've tested 4096KB I/O requests with no problems.

I looked through the DMA paths on the hardware drivers to ensure they
could take advantage of the SG chaining, and it seems that every one
except ipath uses the system's DMA routines, which have been converted
to handle chaining.  ipath looks like it should be OK, but I have no
way to test it.

Signed-off-by: David Dillow <dillowda@ornl.gov>

[ Tested on ipath.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:37 -08:00
David Dillow
8cba207732 IB/srp: Respect target credit limit
The current SRP initiator will send requests even if it has no credits
available.  The results of sending extra requests are vendor specific,
but on some devices, overrunning credits will cost 85% of peak
performance -- e.g. 100 MB/s vs 720 MB/s.  Other devices may just drop
the requests.

This patch will tell the SCSI midlayer to queue requests if there are
fewer than two credits remaining, and will not issue a task management
request if there are no credits remaining.  The mid-layer will retry
the queued command once an outstanding command completes.

The patch also removes the unlikely() in __srp_get_tx_iu(), as it is
not at all unlikely to hit this limit under heavy load.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:37 -08:00
Rolf Manderscheid
a9e527e3f9 IPoIB: improve IPv4/IPv6 to IB mcast mapping functions
An IPoIB subnet on an IB fabric that spans multiple IB subnets can't
use link-local scope in multicast GIDs.  The existing routines that
map IP/IPv6 multicast addresses into IB link-level addresses hard-code
the scope to link-local, and they also leave the partition key field
uninitialised.  This patch adds a parameter (the link-level broadcast
address) to the mapping routines, allowing them to initialise both the
scope and the P_Key appropriately, and fixes up the call sites.

The next step will be to add a way to configure the scope for an IPoIB
interface.

Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:37 -08:00
Oliver Pinter
38dc732f47 IB/iser: Typo fix (s/destory/destroy/)
Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:32 -08:00
Erez Zilber
bd5d7a8585 IB/iser: update URLs of iSER docs
Signed-off-by: Erez Zilber <erezz@voltaire.com>
2008-01-25 14:15:32 -08:00
Joe Perches
908cf9a565 drivers/infiniband: Add missing "space"
Add missing spaces in the middle of format strings.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:26 -08:00
Pradeep Satyanarayana
68e995a295 IPoIB/cm: Add connected mode support for devices without SRQs
Some IB adapters (notably IBM's eHCA) do not implement SRQs (shared
receive queues).  The current IPoIB connected mode support only works
on devices that support SRQs.

Fix this by adding support for using the receive queue of each
connected mode receive QP.  The disadvantage of this compared to using
an SRQ is that it means a full queue of receives must be posted for
each remote connected mode peer, which means that total memory usage
is potentially much higher than when using SRQs.  To manage this, add
a new module parameter "max_nonsrq_conn_qp" that limits the number of
connections allowed per interface.

The rest of the changes are fairly straightforward: we use a table of
struct ipoib_cm_rx to hold all the active connections, and put the
table index of the connection in the high bits of receive WR IDs.
This is needed because we cannot rely on the struct ib_wc.qp field for
non-SRQ receive completions.  Most of the rest of the changes just
test whether or not an SRQ is available, and post receives or find
received packets in the right place depending on the answer.

Cleaning up dead connections actually becomes simpler, because we do
not have to do the "last WQE reached" dance that is required to
destroy QPs attached to an SRQ.  We just move the QP to the error
state and wait for all pending receives to be flushed.

Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>

[ Completely rewritten and split up, based on Pradeep's work.  Several
  bugs fixed and no doubt several bugs introduced.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:24 -08:00
Roland Dreier
efcd99717f IPoIB/cm: Factor out ipoib_cm_free_rx_reap_list()
Factor out the code for going through the rx_reap list of struct
ipoib_cm_rx and freeing each one.  This consolidates the code
duplicated between ipoib_cm_dev_stop() and ipoib_cm_rx_reap() and
reduces the risk of error when adding additional accounting.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:24 -08:00
Roland Dreier
7b3687df66 IPoIB/cm: Factor out ipoib_cm_create_srq()
Factor out the code to create an SRQ and allocate the receive ring in
ipoib_cm_dev_init() into a new function ipoib_cm_create_srq().  This
will make the code neater when support for devices that don't implement
SRQs is added.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:24 -08:00
Roland Dreier
1efb61444c IPoIB/cm: Factor out ipoib_cm_free_rx_ring()
Factor out the code to unmap/free skbs and free the receive ring in
ipoib_cm_dev_cleanup() into a new function ipoib_cm_free_rx_ring().
This function will be called from a couple of other places when
support for devices that don't implement SRQs is added.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:24 -08:00
Roland Dreier
2337f80941 IPoIB: Trivial formatting cleanups
Fix whitespace blunders, convert "foo* bar" to "foo *bar", etc.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:23 -08:00
Erez Zilber
90c18f3c28 [SCSI] IB/iSER: add logical unit reset support
eh_device_reset_handler was already added to scsi_host_template
in iscsi_tcp, and is now added also for iscsi_iser.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 13:39:43 -06:00
Olaf Kirch
a8ac6311cc [SCSI] iscsi: convert xmit path to iscsi chunks
Convert xmit to iscsi chunks.

from michaelc@cs.wisc.edu:

Bug fixes, more digest integration, sg chaining conversion and other
sg wrapper changes, coding style sync up, and removal of io fields,
like pdu_sent, that are not needed.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:42 -06:00
Mike Christie
f6d5180c78 [SCSI] libiscsi: fix nop handling
During root boot and shutdown the target could send us nops.
At this time iscsid cannot be running, so the target will drop
the session and the boot or shutdown will hang.

To handle this and allow us to better control when to check the network
this patch moves the nop handling to the kernel.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:35 -06:00
Mike Christie
b3a7ea8d50 [SCSI] libiscsi: do not block session during logout
There is not need to block the session during logout. Since
we are going to fail the commands that were blocked just fail them
immediately instead.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:28 -06:00
Boaz Harrosh
38ad03de3f [SCSI] libiscsi,iser: patch for AHS support
- The default initialization of hdr_max is the minimum -
    sizeof(struct iscsi_cmd) - Once this patch goes into iser the default
    initialization at libiscsi can be removed.
  - This is not yet full support for AHSs at iser end. But it should be easy.
    Just allocate more space at iser_desc right after iscsi_hdr. Than
    at transmission time use ctask->hdr_len to retrieve the total
    size of all iscsi pdu headers. See previous patch at iscsi_tcp.[ch]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:25 -06:00
Mike Christie
843c0a8a76 [SCSI] libiscsi, iscsi_tcp: add device support
This patch adds logical unit reset support. This should work for ib_iser,
but I have not finished testing that driver so it is not hooked in yet.

This patch also temporarily reverts the iscsi_tcp r2t write out patch.
That code is completely rewritten in this patchset.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:28:19 -06:00