Save RSN auth type in related context for RSN assocoation.
Some OWE specific operation need to be done according to
this RSN auth type since we cannot tell if a STA / SAP is OWE,
WPA2 or OPEN by its auth type OPEN.
Change-Id: I17dd72c7adf1c663725ac58ce263f4408d9c967b
CRs-Fixed: 2396885
Host driver packs only the RSN IE, WAP IE and additional IE
from association request to upper layers. With any new IE
support added on the driver, the driver has to add new structure
to csr_roam_info and pack that IE into the
tSap_StationAssocReassocCompleteEvent and pass it to higher
layers. This increases the redundancy with new IE introduced.
To facilitate hostapd to get information on all IE, pass all the
IE present in the assoc request to hostapd.
Change-Id: I1665a83de52bd67529ea026dc0c5e92cfbd51590
CRs-Fixed: 2390425
In case SAP+P2PGO+STA interface are present, with SAP in down state
and STA in conencted state and P2PGO is started, it uses API
policy_mgr_concurrent_beaconing_sessions_running checks if multiple
beaconing interface are present to force the P2PGO to SCC or DBS
channel and as SAP and P2PGO interface are present it returns true.
Now the API to get concurrent channel get the channel of STA
which is active and thus P2PGO moves to STA channel.
Thus use the api to get channel for concurrent beaconing interface
instead of any interface to take care of beaconing interface
concurrency scenareos. With this concurrent channel will be non 0 only
if any other beaconing entity is present and in up state and thus
P2PGO will move to SCC or DBS only in case any other beaconing
interface is actually up and beaconing on a channel.
Change-Id: Ic4bacc8cc45386499c11e09e79d095e926318400
CRs-Fixed: 2395530
Change Iea602a1da42d5eecafae1d00f2260f4930128f40 ("qcacld-3.0: Remove
eWNI_SME_GET_ASSOC_STAS_REQ handling") removed the logic that sent the
eSAP_ASSOC_STA_CALLBACK_EVENT event. Since this event is obsolete,
remove the handling code from SAP and HDD.
Change-Id: I49e169a1832845bac4e89cd832d72dec42d4ee09
CRs-Fixed: 2396058
The Linux Coding Style enumerates a few special cases where typedefs
are useful, but stresses "NEVER EVER use a typedef unless you can
clearly match one of those rules." The tSirSmeChanInfo typedef does
not meet any of those criteria, so replace it (and the "tp" variant)
with a reference to the underlying struct.
Further note the Linux Coding Style frowns upon mixed-case names and
so-called Hungarian notation, so in conjunction rename the underlying
struct to be in compliance, as well as to be more specific on how the
struct is used.
Change-Id: Ic9a596d05a7c4c0727264c33e865edd4a9786dac
CRs-Fixed: 2394998
Currently, driver allows VDEV-RESTART on SAP interface in order to
channel switch or hidden ssid connection when roaming is in progress
on STA interface. This leads to two simultaneous vdev starts or
vdev-restart in FW which causes the FW to assert.
Add changes to reject the channel switch for SAP or in hidden ssid
connection if roaming is in progress on any STA interface.
Change-Id: I1cea389021049779b5aa00145e2470cd67158edd
CRs-Fixed: 2390235
Per the Linux Coding Style mixed-case names are frowned upon, so
rename addIeParams to add_ie_params everywhere it appears.
Change-Id: Id003bf004d42d5313a932309a47bf82f228eda0c
CRs-Fixed: 2393731
The Linux Coding Style enumerates a few special cases where typedefs
are useful, but stresses "NEVER EVER use a typedef unless you can
clearly match one of those rules." The tSirSupportedRates typedef does
not meet any of those criteria, so replace it (and the "tp" variant)
with a reference to the underlying struct.
Further note the Linux Coding Style frowns upon mixed-case names
and so-called Hungarian notation, so in conjunction rename the
underlying struct to be in compliance.
Change-Id: I5007379a50223b6de85830e7ae389e65cdb8e4d3
CRs-Fixed: 2392398
Currently connected peer capability information is not getting
cached for SAP.
Add support to cache the capability info from assoc request
Change-Id: I0088bd20a98e2491f6ffb452417bc73f21e69e63
CRs-Fixed: 2392939
While processing deuath notification in lim, PE session is deleted
without checking the session role. For AP case, if the deauth
notification is given to BSSID then also pe session will be deleted
and later clean up of the SAP will not be done properly.
Hence, for SAP case delete the pe session as part of del bss
response only.
Here the scenario is SAP's BSSID is blacklisted and acl command
is given via IOCTL. This triggered the deauth notification to lim,
and pe_session is deleted. Later, the del sta command is failed
because del bss has not happened and vdev delete also not done.
Hence delete pe session only for sta mode in lim_send_sme_deauth_ntf.
And return failure status for iwpriv softap.0 modify_acl command
if it is given for SAP's own mac address.
Change-Id: I2b394ae8676fe569537b416388a9566f2d35892a
CRs-Fixed: 2388404
Change I875c2f14ffd54272fc9ea0df1cecc6dd1171e310 introduced an elaborate
workaround to prevent the pre-cac work from flushing itself during stop
adapter. Introduce a less complicated work around by simply checking if
the current adapter is the pre-cac adapter before flushing the pre-cac
work.
Change-Id: Ib3e0716f8d088d124e960dcd724f579fb39a3d74
CRs-Fixed: 2387173
Regulatory component is getting updated to reduce the
code size based on different regulatory features. In this
process new regulatory files are getting added and some
of the files are getting removed.
To compile the newly added files update the required changes
in driver Kbuild file.
Some of the functins which are not supposed to be invoked from
outside the component directly, replace those function calls
with the appropriate wrapper functions.
Change-Id: I31a25268250b99f4f156c4f149966213746d999e
CRs-Fixed: 2373780
Change Ib83700825112cc52dade594909bfa8993909ac29 ("qcacld-3.0: Send
management frame indication directly to HDD from PE") removed the
usage of tSap_ManagementFrameInfo. Since this struct is obsolete,
remove it.
Change-Id: Ic10c150286fe9f998884cdfcb8da2edadee7e156
CRs-Fixed: 2380771
Change I9d05cd7b8e051c4e9e4912cf866206ae32ec293d ("qcacld-3.0: Define
data structures for new AP requirements") added the ampdu_size field
to struct sap_config. However logic to use this field was never added,
so remove the field since it is unused.
Change-Id: I183766da3af3a3e9c609ccde95a0cca561813226
CRs-Fixed: 2380767
All WNI configurations will be cleanup based on new cfg framework, so
change Change WNI_CFG_COUNTRY_CODE_LEN to CFG_COUNTRY_CODE_LEN.
Change-Id: I786b62e2c0aff08a89fc3c8a3359e2ffb4044269
CRs-Fixed: 2380488
All WNI configurations will be cleanup based on new cfg framework, so
change Change WNI_VALID_CHANNEL_LIST_LEN to VALID_CHANNEL_LIST_LEN.
Change-Id: I805be88ecdcca90cf3a19d1784bf8f8c261b6ca4
CRs-Fixed: 2379748
Change to avoid potential out of bound issue
when unsafe channel numbers parameter is invalid.
Change-Id: I0c2cdac844c5fd644fce61d3d69fefcecdb62f19
CRs-Fixed: 2374986
In SSR, after reinit, there is still memory leak
for gp_sap_ctx; As in multi SSR test, memory leak
detection is disabled in recovery mode, it is a
little late to get the issue moment.
Check gp_sap_ctx after stopping all adapter in
hdd_is_interface_down_during_ssr.
Change-Id: I77708d296fb218ca53ac656f844d02f58e23d241
CRs-Fixed: 2377718
Change I3226438b908a96f1b1bd3c2968a0c20eef81a799 ("qcacld-3.0:
Populate correct supported rates from hostapd.conf file") removed
the logic which previously utilized the supp_rate_set and
extended_rate_set fields in struct sap_context. Since these fields
are now obsolete, remove them.
Change-Id: Id433659da18d61217b45a839aaddcfbae329143d
CRs-Fixed: 2378327
Change I83a704d3f03e9cb9e6a7420f32d609a323799a12 ("qcacld-3.0: Remove
legacy P2P codes in SAP") removed the usage of the sap_roc_ind field
in tSap_Event. Since it is obsolete, remove the field along with the
underlying struct sap_roc_ready_ind_s.
Change-Id: I6101ec7874825b8e4e2e891c3f8ae084486eef87
CRs-Fixed: 2378326
currently the driver just ignore the channel numbers greater
than 165 for 80MHZ channel bonding, which results in best
channel selected as 169, 173 in 20MHZ bandwidth as the
respective channels does not support 80, or even 40 MHZ
channel bandwidth.
Fix is to assign the maximum weight to channel numbers greater
than 165, so that they do not get selected as best channel
for 80MHZ bandwidth operation.
Change-Id: I44c5073a806f39d98103681267faa317a6b6d73b
CRs-Fixed: 2375375
sapDfsChannelNolList and numCurrentRegDomainDfsChannels
fields in sap dfs info is not populated and is used in
csr_is_valid_channel.
Fix is to remove the redundant logic in csr_is_valid_channel.
Change-Id: Ib98423ba910a1947a908f4a74762f82183aa89d5
CRs-Fixed: 2374080
Make changes to the legacy code to support the
new SET KEY converged infrastructure.
Change-Id: Ic5359e3a9035ac5f2a937a9a1013fa92764cda9d
CRs-Fixed: 2358795
Change "I9d05cd7b8e051c4e9e4912cf866206ae32ec293d" ("qcacld-3.0:
Define data structures for new AP requirements") added the
vendor_ie_access_policy field to struct sap_config, but subsequently
no code was added which actually utilizes this field. Since it is
unused, remove it, along with the underlying enumeration.
Change-Id: I7a3661a50ef17b0452e87e0ed86c3826b3bd199d
CRs-Fixed: 2375528
Change I9d83f66bce4ec66bc131747254a45d8b6afb5cbb ("qcacld-3.0:
Remove eSAP_GET_WPSPBC_SESSION_EVENT") removed the references
to the sapGetWPSPBCSessionEvent field in typedef tSap_Event.
Since this field is obsolete, remove it, along with the underlying
tSap_GetWPSPBCSessionEvent typedef which is also now obsolete.
Change-Id: I20dbc1635430f8148f997aeb15df4ddb7e06ceef
CRs-Fixed: 2375527
Change I5a07c44ca4138af5494d1a6f6e1d08158d244be2 ("qcacld-3.0: Remove
SapAllChnlList from struct sap_context") removed the last reference to
typedef tChannelInfo. Since this typedef is now obsolete, remove it.
Change-Id: Ib38c9744c9419ce91b94956b5da78cc7bcc440c5
CRs-Fixed: 2375526
Change I2c3b96e1f2ee44c9f1158108d4b5e48495222080 ("qcacld-3.0: Make
SAP open()-close() & start()-stop() symmetrical") removed the last
reference to typedef tSapChannelListInfo. Since the typedef is
obsolete, remove it.
Change-Id: I4fc7cf83f41ad0192b971513f0456cf211fabb54
CRs-Fixed: 2375525
The parameter identifiers used in the implementation of
sap_get_channel_list() differ from the ones used in the forward
reference. Since this can be confusing for both humans and code
analysis tools, harmonize on the parameters used in the
implementation.
Change-Id: I356740677e790e48b0c28d5ca694be3ae3835d59
CRs-Fixed: 2375524
Change I3c4f8da14dbc70a3102fb1892bb101eb1a90a00d ("qcacld-3.0: Fix
firmware assertion caused by vdev delete") removed all usage of field
isScanSessionOpen in struct sap_context. Since it is obsolete, remove
it.
Change-Id: I30eb9d3b4ca39a5f14dafe9559d025cb361372b5
CRs-Fixed: 2375522
The implementation of sap_channel_matrix_check() is no longer part of
the driver, but the prototype is still present. Since the prototype is
obsolete, remove it.
Change-Id: I689c4360776a2b46d723c48dd5bb8a61da5c95cd
CRs-Fixed: 2375521
Change I76e78824cdc7acad87e60310d53225596630ea94 ("qcacld-3.0: Remove
SAP FSM dependency from CSA") removed all logic which used the
stop_bss_in_progress field in struct sap_context. Since this field is
now obsolete, remove it.
Change-Id: I9867bcf7d8021e7173c679d3e20e16ca8bdbc5cc
CRs-Fixed: 2375520
Change Ia0fa016b174ef4b50e2cc339e4e476ec65642dbf ("qcacld-3.0: Use dfs
component support") removed the logic that utilized the SapAllChnlList
in struct sap_context. Since this field is now obsolete, remove it,
along with the underlying tAll5GChannelList typedef that is also now
obsolete.
Change-Id: I5a07c44ca4138af5494d1a6f6e1d08158d244be2
CRs-Fixed: 2374834
The ap_table_max_size and ap_table_expiration_time fields in struct
sap_config are unused, so remove them.
Change-Id: I24aabe78b0da45c3dde19b444f94222eb874477d
CRs-Fixed: 2374831
Field ucSecEnabled in struct sap_context is initialized, but is
otherwise unused, so remove it.
Change-Id: I4b947be54d86e0e7e272b97427efd7acb4658fe6
CRs-Fixed: 2374275
The ownSsid and ownSsidLen fields in struct sap_context are unused, so
remove them.
Change-Id: I405f0c7c47e163a962bc3db19d88d5b69ca95ac7
CRs-Fixed: 2374274
In wlansap_update_csa_channel_params if channel is not present in
op class table the for loop become infinite.
Add check to break the loop if BW is 20 and still entry is not found
in op class table.
Change-Id: I6ef6bc138a8df0e18b54bd16a47eba23b437616d
CRs-Fixed: 2373915
Currently the driver doesn't set the passive scan req flag
as false which results in passive scan, and thus introduces
latency.
Fix is to set passive scan as false in ACS scan req.
Change-Id: I1274a4ccb9d99d568c32aeea1a65e4637a82b9c8
CRs-Fixed: 2372103
Change Ia0fa016b174ef4b50e2cc339e4e476ec65642dbf ("qcacld-3.0:
Use dfs component support") removed the last client of
sap_dfs_is_channel_in_preferred_location(). Since this function
is now obsolete, remove it.
Change-Id: I137a00699511c7f019f6cf3b8f0579aeb52c7778
CRs-Fixed: 2371144
