Commit Graph

24 Commits

Author SHA1 Message Date
Yinghai Lu
3c9cb6de1e x86: introduce x86_quirks
introduce x86_quirks array of boot-time quirk methods.

No change in functionality intended.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 09:18:17 +02:00
Ingo Molnar
5548ed1135 x86, VisWS: turn into generic arch, install proper PCI quirk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 18:55:33 +02:00
Ingo Molnar
3b33553bad x86: add early quirk support
Add early quirks support.

In preparation of enabling the generic architecture to boot on a VISWS.

This will allow us to remove the VISWS subarch and all its complications.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10 18:55:31 +02:00
Jeremy Fitzhardinge
f97013fd8f x86, 64-bit: split x86_64_start_kernel
Split x86_64_start_kernel() into two pieces:

   The first essentially cleans up after head_64.S.  It clears the
   bss, zaps low identity mappings, sets up some early exception
   handlers.

   The second part preserves the boot data, reserves the kernel's
   text/data/bss, pagetables and ramdisk, and then starts the kernel
   proper.

This split is so that Xen can call the second part to do the set up it
needs done.  It doesn't need any of the first part setups, because it
doesn't boot via head_64.S, and its redundant or actively damaging.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:11:06 +02:00
Jeremy Fitzhardinge
102e3b8d3f x86, 64-bit: add prototype for x86_64_start_kernel()
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:10:58 +02:00
Yinghai Lu
29f784e369 x86: change some functions in setup.c to static
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:10:54 +02:00
Yinghai Lu
cfb0e53b05 x86: introduce init_memory_mapping for 32bit #2
moving relocate_initrd early

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 13:10:32 +02:00
Yinghai Lu
11cd0bc140 x86: move some func calling from setup_arch to paging_init
those function depend on paging setup pgtable, so they could access
the ram in bootmem region but just get mapped.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:50:24 +02:00
Yinghai Lu
2ec65f8b89 x86: clean up using max_low_pfn on 32-bit
so that max_low_pfn is not changed after it is set.
so we can move that early and out of initmem_init.

could call find_low_pfn_range just after max_pfn is set.

also could move reserve_initrd out of setup_bootmem_allocator

so 32bit is more like 64bit.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:50:20 +02:00
Yinghai Lu
225c37d71b x86: introduce reserve_initrd
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:50:16 +02:00
Yinghai Lu
ce97c40e28 x86: move reserve_standard_io_resource to setup.c
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:50:12 +02:00
Yinghai Lu
a9c1182fbd x86: seperate probe_roms into another file
it is only needed for 32bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:50:05 +02:00
Bernhard Walle
1ecd27657b x86: unify crashkernel reservation for 32 and 64 bit
This patch moves the reserve_crashkernel() to setup.c and removes the
architecture-specific version. Both versions were more or less the same.

I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so
that it compiles).

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:45:44 +02:00
Yinghai Lu
95a71a45c2 x86: cleanup machine_specific_memory_setup, v2
1. let 64bit support 88 and e801 too
2. introduce default_machine_specific_memory_setup, and reuse it
   for voyager

v2: fix 64 bit compiling

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 10:39:01 +02:00
Yinghai Lu
064d25f120 x86: merge setup_memory_map with e820
... and kill e820_32/64.c and e820_32/64.h

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 10:38:25 +02:00
Yinghai Lu
fb093eab6d x86: remove duplicated e820 func in setup.h
we already have them in e820.h

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 12:51:03 +02:00
Yinghai Lu
f0d43100f1 x86: extend e820 early_res support 32bit -fix #3
introduce init_pg_table_start, so xen PV could specify the value.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-31 09:55:47 +02:00
Paul Jackson
c3965bd151 x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant
This patch is motivated by a subsequent patch which will allow for more
memory map entries on EFI supported systems than can be passed via the x86
legacy BIOS E820 interface.  The legacy interface is limited to E820MAX ==
128 memory entries, and that "E820MAX" manifest constant was used as the
size for several arrays and loops over those arrays.

The primary change in this patch is to change code loop sizes over those
arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro
evaluated for the array being looped.  That way, a subsequent patch can
change the size of some of these arrays, without breaking this code.

This patch also adds a parameter to the sanitize_e820_map() routine,
which had an implicit size for the array passed it of E820MAX entries.
This new parameter explicitly passes the size of said array.  Once again,
this will allow a subsequent patch to change that array size for some
calls to sanitize_e820_map() without breaking the code.

As part of enhancing the sanitize_e820_map() interface this way, I further
combined the unnecessarily distinct x86_32 and x86_64 declarations for
this routine into a single, commonly used, declaration.

This patch in itself should make no difference to the resulting kernel
binary.

[ mingo@elte.hu: merged to -tip ]

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 10:55:11 +02:00
Joe Perches
915cd5aa0a include/asm-x86/setup.h: checkpatch cleanups - formatting only
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:27 +02:00
Glauber Costa
2785c8d052 x86: call vsmp_init explicitly
It becomes to early for ioremap, so we use early_ioremap

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:47 +02:00
Glauber de Oliveira Costa
746ef0cd0c x86: prepare 64-bit architecture initialization for paravirt
This patch prepares the x86_64 architecture initialization for
paravirt. It requires a memory initialization step, which is done
by implementing 64-bit version for machine_specific_memory_setup,
and putting an ARCH_SETUP hook, for guest-dependent initialization.
This last step is done akin to i386

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:11 +01:00
H. Peter Anvin
fa76dab935 x86: clean up setup.h and the boot code
Make <asm/setup.h> usable by the boot code.

Clean up vestiges of the old command-line protocol from setup.h and
head_32.S (it is still supported from the boot loader point of
view, since it is converted to the new command-line protocol by the
boot code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:25 +02:00
Thomas Gleixner
ef685298b4 x86: merge setup_32/64.h
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:24 +02:00
Thomas Gleixner
96a388de5d i386/x86_64: move headers to include/asm-x86
Move the headers to include/asm-x86 and fixup the
header install make rules

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:20:03 +02:00