In SAP mode, as part of dhcp inspection, sta info is fetched
using the source address of the packet irrespective of
direction. This results in sta info fetch failure in case
of dhcp tx frames where source address is self mac address
which is not registered as part of SAP start. Due to this,
when sending dhcp ack frame, tx comp flag is not set in nbuf
cb causing dhcp stop ind to be not sent to firmware.
Fix is to use dhcp client mac address to fetch sta info.
Change-Id: Ia61b93d24f3d069b40fe8ffa5ee7b6ba1e30e7c5
CRs-Fixed: 2632275
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG
Change-Id: I865ec470e1b24d1e4c5094648435ea7020a01af8
CRs-Fixed: 2634095
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
Change-Id: I91a97a17fa27f93f20385a250f098d5b01081023
CRs-Fixed: 2634072
In WEP SAP mode, the ping between SAP and client is failed
because in the SAP side the firmware has no unicast key
for peer mac address. The default address in key context is
SAP bssid.
Update the peer mac address before set key to firmware for
the WEP peer.
Change-Id: Ia5ba4612d0cc0f9900c72baf1c37bd278b526389
CRs-Fixed: 2599289
11K test bed sends beacon report request for channel 48 with
invalid reg class 0 to DUT. So, driver gets chan_freq 0 by API
wlan_reg_chan_opclass_to_freq because of reg class 0.
To get correct channel freq for beacon report request, use new
API wlan_reg_country_chan_opclass_to_freq to
get freq from country operating class table firstly by (opclass,
channel number) pair. When the lookup is failed, the API will
try to look up by chan number only.
Change-Id: I5b56804c20d6fade17b2acaa0f7c261feebd6370
CRs-Fixed: 2603989
Excluding few Helium based targets from SMMU S1
feature enablement which are not having the
Kernel support for SMMU S1.
Change-Id: I46c17749150f00113137c546d7e14964860aa2e3
CRs-Fixed: 2633675
Currently no stats were printed related to ARP and DNS frames at STA
after initial association or after roaming complete.
To print these logs, add INI configuration and a periodic timer to
print ARP and DNS stats after initial association or after roaming
complete. This is an optional feature controlled by
'WLAN_FEATURE_PERIODIC_STA_STATS' flag.
Change-Id: I373632cc35584728c5b556bb28eda1077d51fd9b
CRs-Fixed: 2619383
Currently in net dev cleanup of ipa host interface if the
ipa interface does not exist for that particular net dev,
last ipa iface reference is passed. This may lead to invalid
access. So fix by validating the iface context before clean
up of host ipa interface.
Change-Id: I753c922b5c82c676a318df87552051fdd74c983c
CRs-Fixed: 2632382
User get BSS stats for the command response of GETBSSINFO. Driver saves
BSS info of the connected AP in HDD's station context. For every
association completion, driver updates BSS info stats.
In LFR3 roaming, Roam sync state in the CSR layer is set to 1 if STA
associates with new AP because of roaming. Thus for LFR3 roaming, driver
uses roam sync state to update roam count while processing association
completion.
Change-Id: Ia75f4c7b049a0546b2922d890cb3c12f6f4513a2
CRs-Fixed: 2632421
There are various entry and exit prints present in DSC that are not
necessary for any debugging purpose.
Cleanup these extra logs
Change-Id: I0f2f5b03ddc3e4535cc352fd13782eac1a235121
CRs-Fixed: 2616198
If the idle restart is not stopped before reading the driver status
the driver status could be changed in the other thread leading to
different issues.
Stop the idle restart timer before reading the driver status, so
the next action depending on the driver status can be taken correctly.
Change-Id: Ida7fe3fe8144e300344d29cae8188b64f074b3bb
CRs-Fixed: 2626500
ignore_fw_reg_offload_ind is used to ignore regdb offload
indication from FW and regulatory is treated as non offload.
Change-Id: Ic9a47fe3ec49cf1fa9cbf7ab166decdc4ece0511
CRs-Fixed: 2630994
Introduce ini for roaming_triggers to enable/disable specific
roaming triggers. This will be the master ini to control roaming
triggers. If this ini is set to zero, roaming will not be enabled
on the sta interface unless its enabled via vendor command.
A new roaming trigger - Sta kickout roaming is introduced in
firmware, include this bit support also in the ini.
The value of this ini will be sent over the wmi command
WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID during RSO start.
Reset this value to 0 during RSO stop if RSO stop is due to
disconnect or roam synch failure.
Change-Id: I02f207cdde9d8fb68cd91fab07572baa9e7ac50d
CRs-Fixed: 2631712
Introduce an INI "enable_roam_reason_vsie" to inidicate fw to
include/exculde roam reason vsie in reassoc frame
Change-Id: I4d2a44812d8b11a19b0d7d31eb31c826aaeda79d
CRs-Fixed: 2627472
Currently, if roaming happens roam reason is not sent to AP. AP will
not able to know why roaming happened. As roaming is offloaded to
firmware, firmware will include roam reason vsie based on driver
indication by vdev param
WMI_VDEV_PARAM_ENABLE_DISABLE_ROAM_REASON_VSIE based on
below conditions:
Parse the QCA attribute CONFIG_ROAM_REASON to control
inclusion/exculsion of roam reason vsie dynamically. Vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION can control roam
reason vsie inclusion using QCA atrribute CONFIG_ROAM_REASON.
Different operations required to implement this feature can be
specified in QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON, so driver parses
CONFIG_ROAM_REASON, updates enable_roam_reason_vsie and indicates to
firmware by updating vdev param.
a.) If Userspace wants the firmware to include roam reason in reassoc
frame, it can send QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON with
value 1 and driver will update enable_roam_reason_vsie to 1.
Driver will update vdev parameter
WMI_VDEV_PARAM_ENABLE_DISABLE_ROAM_REASON_VSIE, so that firmware
can include roam reason vsie in reassoc frame during roaming.
b.) If this command is not issued, the default behavior of the
firmware is not to include err reason code in beacon report
response. Driver will send default value of
enable_roam_reason_vsie to firmware which is 0.
c.) The userspace requests the firmware to stop roam reason vsie
reporting when roam reason is not required for AP anymore. If
userspace doesn't want the roam reason inclusion, userspace can
send QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON with value 0 and
driver will update enable_roam_reason_vsie and notify firmware to
exclude roam reason.
If userspace requests the driver to get the status of
enable_roam_reason_vsie , to check whether firmware includes roam
reason vsie or not, driver will fill CONFIG_ROAM_REASON attribute and
will update to userspace.
Change-Id: I063c822e99fd6908bd4188b429ffa6a2031cee5d
CRs-Fixed: 2624713
In roaming when preparing pAddBssParams in lim_ft_prepare_add_bss_req,
it should update he cap like lim_sta_send_add_bss_pre_assoc, otherwise
wma_set_bss_rate_flags_he can't be triggered.
Change-Id: I0fe4f7f6e4db076e3e79e6bd81257e44ec3ae682
CRs-Fixed: 2628459
For FILS connection with FILS auth algo, the keys are derived
at the driver and set key is done in the join response path.
In this path, if the security profile is not WEP, set key is
not done. So for FILS case set broadcast keys returns failure
and unicast keys are also not set.
Check the add_key flag also before returning error in set-keys.
Also store the keys in crypto component so that it can be used
at target-if layer to send the unicast/broadcast keys to firmware.
Change-Id: Ia0feb0c9d213ffe50e42b3e67b7074b19898918e
CRs-Fixed: 2625992
1) Add optional code compilation for Dynamic ACS(DCS) module.
2) Add Kbuild option(CONFIG_DCS) to control whether DCS code
should be compiled.
Change-Id: Ia594db21fef43a8ef6e90afb4191f50ba42f74b7
CRs-Fixed: 2604529
When dynamic channel switch is enabled, trigger acs and switch to best
channel if wlan interference is found in 5g mac.
Change-Id: I56661f5c42a233a0dc0a6400d75cb8f5c0019706
CRs-Fixed: 2599176
ARP/NS offload cannot be executed in NaN mode, but currently there is no
check on vdev for opmode so it is still trying to execute. Add an if
check for opmode of vdev and return QDF_STATUS_E_INVAL if in NaN mode.
Change-Id: I89accfef625c2a1eae944662acdff5d3fdd6ea9d
CRs-Fixed: 2630329
Peer assoc cmd always carry er_su_disable with value 0 through
peer_he_ops, it's wrong. When er_su_disable set with value 1
from ref-ap assoc rsp cmd, sta's er_su_disable with peer assoc
cmd should also follow with ref-ap's er_su_disable setting.
Fix is to set er_su_disable from he_op of tpAddStaParams.
Change-Id: Id96f2865ec1ff953478b9519928fe3c766c96e99
CRs-Fixed: 2625546
Issue happens when loading driver fail, it will enter pld_deinit,
as wlan_start_comp maybe reset before waiting in
wlan_hdd_state_ctrl_param_write, so once driver is unloaded,
the completion timeout happens 20s later, it will access invalid
wlan_start_comp.
Move init wlan_start_comp when creating wlan node, so it will not
cause completion timeout.
Change-Id: I9a8f43cdf9aa4c777272b7c28f1160e993c4dce4
CRs-Fixed: 2630479
