Impact: fix AMD Family 11h boot hangs / USB device problems
The AMD Fam11h CPUs have a K8 northbridge. This northbridge is different
from other family's because it lacks GART support (as I just learned).
But the kernel implicitly expects a GART if it finds an AMD northbridge.
Fix this by removing the Fam11h northbridge id from the scan list of K8
northbridges. This patch also changes the message in the GART driver
about missing K8 northbridges to tell that the GART is missing which is
the correct information in this case.
Reported-by: Jouni Malinen <jkmalinen@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix kdump crash on 32-bit sparsemem kernels
Since linux-2.6.27, kdump has failed on i386 sparsemem kernel.
1st-kernel gets a panic just before switching to 2nd-kernel.
The cause is that a kernel accesses invalid mem_section by
page_to_pfn(image->swap_page) at machine_kexec().
image->swap_page is allocated if kexec for hibernation, but
it is not allocated if kdump. So if kdump, a kernel should
not access the mem_section corresponding to image->swap_page.
The attached patch fixes this invalid access.
Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Cc: kexec-ml <kexec@lists.infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo said mtrr_cleanup() is big and ugly.
so break it up into more functions and make it more readable.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Change UV heartbeat function to use idle_cpu to determine cpu's
"idleness". Realign uv_hub definitions.
Signed-of-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
As promised, now that dumpstack_32 and dumpstack_64 have so many bits
in common, we should merge the in-sync bits into a common file, to
prevent them from diverging again.
This patch removes bits which are common between dumpstack_32.c and
dumpstack_64.c and places them in a common dumpstack.c which is built
for both 32 and 64 bit arches.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/Makefile | 2
arch/x86/kernel/dumpstack.c | 319 +++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/dumpstack.h | 39 +++++
arch/x86/kernel/dumpstack_32.c | 294 -------------------------------------
arch/x86/kernel/dumpstack_64.c | 285 ------------------------------------
5 files changed, 363 insertions(+), 576 deletions(-)
Impact: change NMI watchdog detection and disabling sequence
Currently, if the NMI watchdog fails using IOAPIC method, it'll only disable
interrupts on 8259 if the timer is passing thru it. This patch disables
NMI delivery on LINT0 if the NMI watchdog initial test fails, just for safety.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change/improve the way /proc/sys/kernel/nmi_watchdog works
This patch adds support to enable/disable IOAPIC NMI watchdog in runtime via
procfs.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
now that the code is moved and converted to a work queue,
there's some minor cleanups that can be done.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change the implementation of the debug feature
the periodic corruption checks are better off run from a work queue; there's
nothing time critical about them and this way the amount of
interrupt-context work is reduced.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The corruption check code is rather sizable and it's likely to grow over
time when we add checks for more types of corruptions (there's a few
candidates in kerneloops.org that I want to add checks for)... so lets move
it to its own file
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Before moving the code to it's own file, fix some style issues
in the corruption check code.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: avoid section mismatch warning, clean up
The dynamic ftrace determines which nop is safe to use at start up.
When it finds a safe nop for patching, it sets a pointer called ftrace_nop
to point to the code. All call sites are then patched to this nop.
Later, when tracing is turned on, this ftrace_nop variable is again used
to compare the location to make sure it is a nop before we update it to
an mcount call. If this fails just once, a warning is printed and ftrace
is disabled.
Rakib Mullick noted that the code that sets up the nop is a .init section
where as the nop itself is in the .text section. This is needed because
the nop is used later on after boot up. The problem is that the test of the
nop jumps back to the setup code and causes a "section mismatch" warning.
Rakib first recommended to convert the nop to .init.text, but as stated
above, this would fail since that text is used later.
The real solution is to extend Rabik's patch, and to make the ftrace_nop
into an array, and just save the code from the assembly to this array.
Now the section can stay as an init section, and we have a nop to use
later on.
Reported-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: on SGI UV platforms, fix boot crash
UV initialization is currently called too late to call alloc_bootmem_pages().
The current sequence is:
start_kernel()
mem_init()
free_all_bootmem() <--- discard of bootmem
rest_init()
kernel_init()
smp_prepare_cpus()
native_smp_prepare_cpus()
uv_system_init() <--- uses alloc_bootmem_pages()
It should be calling kmalloc().
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: start per CPU heartbeat LED timers on SGI UV systems
The SGI UV system has no LEDS but uses one of the system controller
regs to indicate the online internal state of the cpu. There is a
heartbeat bit indicating that the cpu is responding to interrupts,
and an idle bit indicating whether the cpu is idle when the heartbeat
interrupt occurs. The current period is one second.
When a cpu panics, an error code is written by BIOS to this same reg.
This patchset provides the following:
* x86_64: Add base functionality for writing to the specific SCIR's
for each cpu.
* heartbeat: Invert "heartbeat" bit to indicate the cpu is
"interruptible". If the current thread is the idle thread,
then indicate system is "idle".
* if hotplug enabled, all bits are set (0xff) when the cpu is disabled.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Thu, Oct 23, 2008 at 04:09:52PM -0700, Alexander Beregalov wrote:
> arch/x86/kernel/built-in.o: In function `iommu_setup':
> pci-dma.c:(.init.text+0x36ad): undefined reference to `forbid_dac'
> pci-dma.c:(.init.text+0x36cc): undefined reference to `forbid_dac'
> pci-dma.c:(.init.text+0x3711): undefined reference to `forbid_dac
This patch partially reverts a patch to add IOMMU support to ia64. The
forbid_dac variable was incorrectly moved to quirks.c, which isn't built
when PCI is disabled.
Tested-by: "Alexander Beregalov" <a.beregalov@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This restores the old swiotlb alloc_coherent behavior (before the
alloc_coherent rewrite):
http://lkml.org/lkml/2008/8/12/200
The old alloc_coherent avoids GFP_DMA allocation first and if the
allocated address is not fit for the device's coherent_dma_mask, then
dma_alloc_coherent does GFP_DMA allocation. If it fails,
alloc_coherent calls swiotlb_alloc_coherent (in short, we rarely used
swiotlb_alloc_coherent).
After the alloc_coherent rewrite, dma_alloc_coherent
(include/asm-x86/dma-mapping.h) directly calls swiotlb_alloc_coherent.
It means that we possibly can't handle a device having dma_masks >
24bit < 32bits since swiotlb_alloc_coherent doesn't have the above
GFP_DMA retry mechanism.
This patch fixes x86's swiotlb alloc_coherent to use the GFP_DMA retry
mechanism, which dma_generic_alloc_coherent() provides now
(pci-nommu.c and GART IOMMU driver also use
dma_generic_alloc_coherent).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: fix section mismatch warning - apic_x2apic_phys
x86: fix section mismatch warning - apic_x2apic_cluster
x86: fix section mismatch warning - apic_x2apic_uv_x
x86: fix section mismatch warning - apic_physflat
x86: fix section mismatch warning - apic_flat
x86: memtest fix use of reserve_early()
x86 syscall.h: fix argument order
x86/tlb_uv: remove strange mc146818rtc include
x86: remove redundant KERN_DEBUG on pr_debug
x86: do_boot_cpu - check if we have ESR register
x86: MAINTAINERS change for AMD microcode patch loader
x86/proc: fix /proc/cpuinfo cpu offline bug
x86: call dmi-quirks for HP Laptops after early-quirks are executed
x86, kexec: fix hang on i386 when panic occurs while console_sem is held
MCE: Don't run 32bit machine checks with interrupts on
x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC
x86: make variables static
* 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
x86: canonicalize remaining header guards
x86: drop double underscores from header guards
x86: Fix ASM_X86__ header guards
x86, um: get rid of uml-config.h
x86, um: get rid of arch/um/Kconfig.arch
x86, um: get rid of arch/um/os symlink
x86, um: get rid of excessive includes of uml-config.h
x86, um: get rid of header symlinks
x86, um: merge Kconfig.i386 and Kconfig.x86_64
x86, um: get rid of sysdep symlink
x86, um: trim the junk from uml ptrace-*.h
x86, um: take vm-flags.h to sysdep
x86, um: get rid of uml asm/arch
x86, um: get rid of uml highmem.h
x86, um: get rid of uml unistd.h
x86, um: get rid of system.h -> system.h include
x86, um: uml atomic.h is not needed anymore
x86, um: untangle uml ldt.h
x86, um: get rid of more uml asm/arch uses
x86, um: remove dead header (uml module-generic.h; never used these days)
...
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits)
dock: make dock driver not a module
ACPI: fix ia64 build warning
ACPI: hack around sysfs warning with link order
ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n
intel_menlo: fix build warning
panasonic-laptop: fix build
ACPICA: Update version to 20080926
ACPICA: Add support for zero-length buffer-to-string conversions
ACPICA: New: Validation for predefined ACPI methods/objects
ACPICA: Fix for implicit return compatibility
ACPICA: Fixed a couple memory leaks associated with "implicit return"
ACPICA: Optimize buffer allocation procedure
ACPICA: Fix possible memory leak, error exit path
ACPICA: Fix fault after mem allocation failure in AML parser
ACPICA: Remove unused ACPI register bit definition
ACPICA: Update version to 20080829
ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname
ACPICA: Cleanup for internal Reference Object
ACPICA: Update comments - no functional changes
ACPICA: Update for Reference ACPI_OPERAND_OBJECT
...
* git://git.infradead.org/iommu-2.6:
Admit to maintaining VT-d, for my sins.
dmar: fix uninitialised 'ret' variable in dmar_parse_dev()
intel-iommu: use coherent_dma_mask in alloc_coherent
amd_iommu: fix nasty bug that caused ILLEGAL_DEVICE_TABLE_ENTRY errors
intel-iommu: IA64 support
dmar: remove the quirk which disables dma-remapping when intr-remapping enabled
dmar: Use queued invalidation interface for IOTLB and context invalidation
dmar: context cache and IOTLB invalidation using queued invalidation
dmar: use spin_lock_irqsave() in qi_submit_sync()
The entire file of ftrace.c in the arch code needs to be marked
as notrace. It is much cleaner to do this from the Makefile with
CFLAGS_REMOVE_ftrace.o.
[ powerpc already had this in its Makefile. ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andrew Morton suggested using the proper API for reading and writing
kernel areas that might fault.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add comments to explain what is happening in the x86 arch ftrace code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Have the ftrace_modify_code return error values:
-EFAULT on error of reading the address
-EINVAL if what is read does not match what it expected
-EPERM if the write fails to update after a successful match.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:
a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xc008): Section mismatch in reference from the variable apic_x2apic_phys to the function .init.text:x2apic_acpi_madt_oem_check()
The variable apic_x2apic_phys references
the function __init x2apic_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbf88): Section mismatch in reference from the variable apic_x2apic_cluster to the function .init.text:x2apic_acpi_madt_oem_check()
The variable apic_x2apic_cluster references
the function __init x2apic_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbf08): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .init.text:uv_acpi_madt_oem_check()
The variable apic_x2apic_uv_x references
the function __init uv_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbe88): Section mismatch in reference from the variable apic_physflat to the function .init.text:physflat_acpi_madt_oem_check()
The variable apic_physflat references
the function __init physflat_acpi_madt_oem_check()
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup only, no functionality changed
WARNING: vmlinux.o(.data+0xbe08): Section mismatch in reference from the variable apic_flat to the function .init.text:flat_acpi_madt_oem_check()
The variable apic_flat references
the function __init flat_acpi_madt_oem_check()
This is harmless, because the .acpi_madt_oem_check is only called
during init time. But we keep the function pointer around in a .data
function pointer template, so it's better we do not keep that stale
- so mark this function non-__init.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For some reason tlb_uv was including linux/mc146818rtc.h. It really
just needs linux/seq_file.h
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citix.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix APIC IRQ irregularities on certain older boxes
We should touch the APIC ESR register if only we have it.
The patch fixes the problem mentioned by Max Kellermann:
http://lkml.org/lkml/2008/10/17/147
Bisected-by: Max Kellermann <mk@cm4all.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
[ mingo@elte.hu: build fix ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix missing CPUs in /proc/cpuinfo after CPU hotunplug/hotreplug
In my test, I found that if a cpu has been offline,
the next cpus may not be shown in the /proc/cpuinfo.
if one read() cannot consume the whole /proc/cpuinfo,
c_start() will be called again in the next read() calls.
And *pos has been increased by 1 by the caller(seq_read()).
if this time the cpu#*pos is offline, c_start() will return
NULL, and the next cpus can not be shown.
this fix use next_cpu_nr(*pos - 1, cpu_online_map) to
search the next unshown cpu.
the most easy way to reproduce this bug:
1) offline cpu#1 (cpu#0 is online)
2) dd ibs=2 if=/proc/cpuinfo
the result is that only cpu#0 is shown.
cpu#2 and cpu#3 .... cannot be shown in /proc/cpuinfo
it's bug.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make warning message disappear - functionality unchanged
Problems with bogus IRQ0 override of those laptops should be fixed
with commits
x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC
x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC
that introduce early-quirks based on chipset configuration.
For further information, see
http://bugzilla.kernel.org/show_bug.cgi?id=11516
Instead of removing the related dmi-quirks completely we'd like to
keep them for (at least) one kernel version -- to double-check whether
the early-quirks really took effect. But the dmi-quirks need to be
called after early-quirks are executed. With this patch calling
sequence for dmi-quriks is changed as follows:
acpi_boot_table_init() (dmi-quirks)
...
early_quirks() (detect bogus IRQ0 override)
...
acpi_boot_init() (late dmi-quirks and setup IO APIC)
Note: Plan is to remove the "late dmi-quirks" with next kernel version.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make i386's die() equal to x86_64's version.
Whitespace-only changes on x86_64, to make it equal to i386's
version. (user_mode and user_mode_vm are equal on x86_64.)
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use oops_begin and oops_end in die_nmi.
Whitespace-only changes on x86_64, to make it equal to i386's
version.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
oops_begin/oops_end should always be used in pairs. On x86_64
oops_begin increments die_nest_count, and oops_end decrements
die_nest_count. Doing this makes oops_begin and oops_end equal
to the x86_64 versions.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Always call oops_exit from oops_end, even if signr==0.
Also, move add_taint(TAINT_DIE) from __die to oops_end
on x86_64 and interchange two lines to make oops_end
more similar to the i386-version.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
oops_end is preceded by either a call to __die, or a conditional
call to crash_kexec. Move the conditional call to crash_kexec
from the end of __die to the start of oops_end and remove
the superfluous call to crash_kexec in die_nmi.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change oops_end such that signr=0 signals that do_exit
is not to be called.
Currently, each use of __die is soon followed by a call
to oops_end and 'regs' is set to NULL if oops_end is expected
not to call do_exit. Change all such pairs to set signr=0
instead. On x86_64 oops_end is used 'bare' in die_nmi; use
signr=0 instead of regs=NULL there, too.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
crash_kexec should not be called with console_sem held. Move
the call before bust_spinlocks(0) in oops_end to avoid the
problem.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: "Neil Horman" <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's a corner case in 32 bit x86 kdump at the moment. When the box
panics via nmi, we call bust_spinlocks(1) to disable sensitivity to the
console_sem (allowing us to print to the console in all cases), but we don't
call crash_kexec, until after we call bust_spinlocks(0), which re-enables
console_sem sensitivity.
The result is that, if we get an nmi while the console_sem is held and
kdump is configured, and we try to print something to the console during
kdump shutdown (which we often do) we deadlock the box. The fix is to
simply do what 64 bit die_nmi does which is to not call bust_spinlocks(0)
until after we call crash_kexec.
Patch below tested successfully by me.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Running machine checks with interrupt on is a extremly bad idea. The machine
check handler only runs when the system is broken and needs to finish
as quickly as possible.
Remove the respective bogus post 2.6.27 regression and call
the machine check vector directly again.
This removes only code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[Cherry-picked from x86/mce]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Impact: fix hung bootup and other misbehavior on certain laptops
On some more HP laptops BIOS reports an IRQ0 override
but the SB600 chipset is configured such that timer
interrupts go to INT0 of IOAPIC.
Check IRQ0 routing and if it is routed to INT0 of IOAPIC skip the
timer override.
See following bug reports:
http://bugzilla.kernel.org/show_bug.cgi?id=11715http://bugzilla.kernel.org/show_bug.cgi?id=11516
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use consistent names for region size and conherence id on x86 and ia64.
The SGI xp drivers are used on both ia64 and x86. Using the same
names (sn_coherency_id, sn_region_size) simplies the driver code.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
These variables are only used in their source files, so make them static.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
needed if the i7300_idle driver is to be modular.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix off-by-one in for_each_irq_desc_reverse().
Impact is near zero in practice, because nothing substantial wants to
iterate down to IRQ#0 - but fix it nevertheless.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86 ACPI: fix breakage of resume on 64-bit UP systems with SMP kernel
Introduce is_vmalloc_or_module_addr() and use with DEBUG_VIRTUAL
This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.
The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]). The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.
* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
genirq: improve include files
intr_remapping: fix typo
io_apic: make irq_mis_count available on 64-bit too
genirq: fix name space collisions of nr_irqs in arch/*
genirq: fix name space collision of nr_irqs in autoprobe.c
genirq: use iterators for irq_desc loops
proc: fixup irq iterator
genirq: add reverse iterator for irq_desc
x86: move ack_bad_irq() to irq.c
x86: unify show_interrupts() and proc helpers
x86: cleanup show_interrupts
genirq: cleanup the sparseirq modifications
genirq: remove artifacts from sparseirq removal
genirq: revert dynarray
genirq: remove irq_to_desc_alloc
genirq: remove sparse irq code
genirq: use inline function for irq_to_desc
genirq: consolidate nr_irqs and for_each_irq_desc()
x86: remove sparse irq from Kconfig
genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
...
Update assorted email addresses and related info to point
to a single current, valid address.
additionally
- trivial CREDITS entry updates. (Not that this file means much any more)
- remove arjans dead redhat.com address from powernow driver
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generated 'capflags.c' file wasn't properly ignored, and the list of
files in scripts/basic/ wasn't up-to-date.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In ftrace, logic is defined in the WARN_ON_ONCE, which can become a
nop with some configs. This patch fixes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change various rtc related code to use the new bcd2bin/bin2bcd functions
instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o elfcorehdr_addr is used by not only the code under CONFIG_PROC_VMCORE
but also by the code which is not inside CONFIG_PROC_VMCORE. For
example, is_kdump_kernel() is used by powerpc code to determine if
kernel is booting after a panic then use previous kernel's TCE table.
So even if CONFIG_PROC_VMCORE is not set in second kernel, one should be
able to correctly determine that we are booting after a panic and setup
calgary iommu accordingly.
o So remove the assumption that elfcorehdr_addr is under
CONFIG_PROC_VMCORE.
o Move definition of elfcorehdr_addr to arch dependent crash files.
(Unfortunately crash dump does not have an arch independent file
otherwise that would have been the best place).
o kexec.c is not the right place as one can Have CRASH_DUMP enabled in
second kernel without KEXEC being enabled.
o I don't see sh setup code parsing the command line for
elfcorehdr_addr. I am wondering how does vmcore interface work on sh.
Anyway, I am atleast defining elfcoredhr_addr so that compilation is not
broken on sh.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We are on 64-bit so better use u64 instead of u32 to deal with
addresses:
static void __init iommu_set_device_table(struct amd_iommu *iommu)
{
u64 entry;
...
entry = virt_to_phys(amd_iommu_dev_table);
...
(I am wondering why gcc 4.2.x did not warn about the assignment
between u32 and unsigned long.)
Cc: iommu@lists.linux-foundation.org
Cc: stable@kernel.org
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The current Intel IOMMU code assumes that both host page size and Intel
IOMMU page size are 4KiB. The first patch supports variable page size.
This provides support for IA64 which has multiple page sizes.
This patch also adds some other code hooks for IA64 platform including
DMAR_OPERATION_TIMEOUT definition.
[dwmw2: some cleanup]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
x86 ACPI: Fix breakage of resume on 64-bit UP systems with SMP kernel
We are now using per CPU GDT tables in head_64.S and the original
early_gdt_descr.address is invalidated after boot by
setup_per_cpu_areas(). This breaks resume from suspend to RAM on
x86_64 UP systems using SMP kernels, because this part of head_64.S
is also executed during the resume and the invalid GDT address
causes the system to crash. It doesn't break on 'true' SMP systems,
because early_gdt_descr.address is modified every time
native_cpu_up() runs. However, during resume it should point to the
GDT of the boot CPU rather than to another CPU's GDT.
For this reason, during suspend to RAM always make
early_gdt_descr.address point to the boot CPU's GDT.
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11568, which
is a regression from 2.6.26.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-and-tested-by: Andy Wettstein <ajw1980@gmail.com>
* 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (134 commits)
KVM: ia64: Add intel iommu support for guests.
KVM: ia64: add directed mmio range support for kvm guests
KVM: ia64: Make pmt table be able to hold physical mmio entries.
KVM: Move irqchip_in_kernel() from ioapic.h to irq.h
KVM: Separate irq ack notification out of arch/x86/kvm/irq.c
KVM: Change is_mmio_pfn to kvm_is_mmio_pfn, and make it common for all archs
KVM: Move device assignment logic to common code
KVM: Device Assignment: Move vtd.c from arch/x86/kvm/ to virt/kvm/
KVM: VMX: enable invlpg exiting if EPT is disabled
KVM: x86: Silence various LAPIC-related host kernel messages
KVM: Device Assignment: Map mmio pages into VT-d page table
KVM: PIC: enhance IPI avoidance
KVM: MMU: add "oos_shadow" parameter to disable oos
KVM: MMU: speed up mmu_unsync_walk
KVM: MMU: out of sync shadow core
KVM: MMU: mmu_convert_notrap helper
KVM: MMU: awareness of new kvm_mmu_zap_page behaviour
KVM: MMU: mmu_parent_walk
KVM: x86: trap invlpg
KVM: MMU: sync roots on mmu reload
...
On some more HP laptops BIOS reports an IRQ0 override
but the SB600 chipset is configured such that timer
interrupts go to INT0 of IOAPIC.
Check IRQ0 routing and if it is routed to INT0 of IOAPIC skip the
timer override.
http://bugzilla.kernel.org/show_bug.cgi?id=11715http://bugzilla.kernel.org/show_bug.cgi?id=11516
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
UIO: Fix mapping of logical and virtual memory
UIO: add automata sercos3 pci card support
UIO: Change driver name of uio_pdrv
UIO: Add alignment warnings for uio-mem
Driver core: add bus_sort_breadthfirst() function
NET: convert the phy_device file to use bus_find_device_by_name
kobject: Cleanup kobject_rename and !CONFIG_SYSFS
kobject: Fix kobject_rename and !CONFIG_SYSFS
sysfs: Make dir and name args to sysfs_notify() const
platform: add new device registration helper
sysfs: use ilookup5() instead of ilookup5_nowait()
PNP: create device attributes via default device attributes
Driver core: make bus_find_device_by_name() more robust
usb: turn dev_warn+WARN_ON combos into dev_WARN
debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
debug: Introduce a dev_WARN() function
sysfs: fix deadlock
device model: Do a quickcheck for driver binding before doing an expensive check
Driver core: Fix cleanup in device_create_vargs().
Driver core: Clarify device cleanup.
...
This series of patches re-introduces the iommu_num_pages function so that
it can be used by each architecture specific IOMMU implementations. The
series also changes IOMMU implementations for X86, Alpha, PowerPC and
UltraSparc. The other implementations are not yet changed because the
modifications required are not obvious and I can't test them on real
hardware.
This patch:
This is a preparation patch for introducing a generic iommu_num_pages function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's somewhat unlikely that it happens, but right now a race window
between interrupts or machine checks or oopses could corrupt the tainted
bitmap because it is modified in a non atomic fashion.
Convert the taint variable to an unsigned long and use only atomic bit
operations on it.
Unfortunately this means the intvec sysctl functions cannot be used on it
anymore.
It turned out the taint sysctl handler could actually be simplified a bit
(since it only increases capabilities) so this patch actually removes
code.
[akpm@linux-foundation.org: remove unneeded include]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Print the name of the last-accessed sysfs file when we oops, to help track
down oopses which occur in sysfs store/read handlers. Because these oopses
tend to not leave any trace of the offending code in the stack traces.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
show_interrupts() and proc helpers are basically the same for
32 and 64 bit. Move them to a shared source file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The sparseirq patches introduced some more ugliness in show_interrupts().
Clean it up all together and make the code easier to read by splitting out
the "tail" function which prints the special interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use APIC_DIVISOR being set to 16 for both 32/64bit
mode. To escape APIC timer underflow during calibration
set it to the maximum possible value.
Also typo error (CONFG instead of proper CONFIG) fixed.
The error was caught by Venkatesh Pallipadi, thanks a lot Venkatesh!
See details on http://lkml.org/lkml/2008/10/9/425
Reported-by: Venkatesh Pallipad <venkatesh.pallipadi@intel.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create /sys/firmware/sgi_uv sysfs entries for partition_id and coherence_id.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a bios call to return partitioning related info.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the EFI callback function and associated wrapper code.
Initialize SAL system table entry info at boot time.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Look for a UV entry in the EFI tables.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/uv_irq.c: In function 'uv_ack_apic':
arch/x86/kernel/uv_irq.c:26: error: implicit declaration of function 'ack_APIC_irq'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the below compile warnings due to recent HPET MSI changes
arch/x86/kernel/hpet.c:48: warning: 'hpet_devs' defined but not used
arch/x86/kernel/hpet.c:50: warning: 'per_cpu__cpu_hpet_dev' defined but not used
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arjan van de Ven noticed that we changed IRQ numbers from decimal
to hex in /proc/interrupts - that can break user-space utilities
like irqbalanced.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix problem caused by reordering of the calls to uv_cpu_init() &
uv_system_init. Originally, uv_cpu_init() was called AFTER uv_system_init.
This order was recently broken as a side-effect of other patches.
With this patch, initialization of cpu 0 is now done by the system_init
call.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Interrupt remapping could lead to NULL dereference in case of
kzalloc failed and memory leak in other way. So fix the
both cases.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we don't have CONFIG_X86_PM_TIMER=y compiler warns about
unused variables. Move PM timer based calibration into a
separate function and make the code cleaner and the compiler
happy as well.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On 82489DX we don't have ESR register so we should not
write it.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace __DO_ACTION macro with io_apic_modify_irq function.
This allow us to 'grep' definitions being hided by
__DO_ACTION macro:
__unmask_IO_APIC_irq
__mask_IO_APIC_irq
__mask_and_edge_IO_APIC_irq
__unmask_and_level_IO_APIC_irq
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Do not use KERN_DEBUG several times on the same line being printed.
Introduced by mine previous patch, sorry.
Reported-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By changing printout form we are able to shrink (and clean up) code a bit.
Former printout example:
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected.
IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected.
New printout example:
init IO_APIC IRQs
1-1 1-2 1-3 (apicid-pin) not connected
2-1 2-2 2-3 (apicid-pin) not connected
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Initialize a per CPU HPET MSI timer when possible. We retain the HPET
timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being used. We
setup the remaining HPET timers as per CPU MSI based timers. This per CPU
timer will eliminate the need for timer broadcasting with IRQ 0 when there
is non-functional LAPIC timer across CPU deep C-states.
If there are more CPUs than number of available timers, CPUs that do not
find any timer to use will continue using LAPIC and IRQ 0 broadcast.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Preparatory patch before the actual HPET MSI changes. Sets up hpet_set_mode
and hpet_next_event for the MSI related changes. Just the code
refactoring and should be zero functional change.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We use irq_cfg_lock lock in SPARSE_IRQ only context so
move it under #ifdef and compiler will be happy.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make the code width a bit shorter with ARRAY_SIZE macro.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
APIC_ARBPRI is a reserved register for XAPIC and beyond.
APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors.
APIC_EOI is a write only register.
APIC_DFR is reserved in x2apic mode.
Access to these registers in x2apic will result in #GP fault. Fix these
apic register accesses.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
According to entry_64.S we do pass pt_regs pointer
into interrupt handlers but don't use them. So we
safely may merge the declarations.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
All callers are __init or __cpuinit so there is no need
to hold this code without CPU_HOTPLUG being set.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- remove useless read of APIC_LVR
- wrap with preempt_disable/enable
- check for integrated APIC just in place
v2: fix by Yinghai Lu.
fix lapic_is_integrated using
let 64-bit too have pic_mode
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Do not check for SPUTIOUS_APIC_VECTOR definition twice.
Check it once - is what we need.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We don't really use it now on 64bit mode but
could reserve it for future.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is no need to hold this code if CPU_HOTPLUG is not
defined.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Initialize vector_irq for the vmi used vector, to point to correct irq.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
otherwise Xen is _completely_ unusable with 5 or more VCPUs.
(when !CONFIG_HAVE_SPARSE_IRQ).
based on Alex Nixon's patch.
also add +1 offset after redir_entries
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Alex Nixon <alex.nixon@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Missed two lines when copying.
Fix panic on one of Ingo's machines that need to adjust ioapic id when
acpi off/ 32bit.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha noticed that we should have a spinlock around it.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix warning:
arch/x86/kernel/io_apic.c: In function ‘print_local_APIC’:
arch/x86/kernel/io_apic.c:1786: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘u64’
arch/x86/kernel/io_apic.c:1787: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘u64’
By creating uniform behavior on 32-bit and 64-bit and printing out the ICR
value in two 32-bit words.
Code has changed:
text data bss dec hex filename
22901 19650 17040 59591 e8c7 io_apic.o.before
22899 19650 17040 59589 e8c5 io_apic.o.after
Due to the 32-bit cast narrowing the printed out value on 64-bit.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
for !CONFIG_HAVE_SPARSE_IRQ
fix:
In file included from arch/x86/kernel/early-quirks.c:18:
include/asm/io_apic.h: In function 'probe_nr_irqs':
include/asm/io_apic.h:209: error: 'NR_IRQS' undeclared (first use in this function)
include/asm/io_apic.h:209: error: (Each undeclared identifier is reported only once
include/asm/io_apic.h:209: error: for each function it appears in.)
v2: fix by Ingo
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo said sparse_irq is some intrusive. need to make it selectable
to make it simple, remove irq_desc as parameter in some functions.
(ack, eoi, set_affinity).
may need to make member if irq_chip to take irq_desc, or struct irq later.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
use code in 64 to replace
move_native_irq(irq, desc);
in 32 bit
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
all the same except INTR_REMAPPING related and ioapic io resource.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
do we have 64bit system with sis chipset?
[ mingo@elte.hu: nope, the problem chipset was 32-bit only.
The code symmetry is good nevertheless. ]
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
also make no_timer_check to be global on 64 bit, because vmi_32 is using that.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
move first_system_vector to apic_64.c.
also add #ifdef CONFIG_INTR_REMAP to prepare 32 bit to use
same file.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
try to make functions have the same order between 32-bit and 64-bit.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
prepare for unification:
try to make functions be of the same order to io_apic_64.c.
v2: add calling setup_msi_irq back to arch_setup_msi_irq
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
let user decide the meaning of the bits.
This unifies the 32-bit and 64-bit io-apic code a bit.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so could figure out bugs where we get an interrupt, but vector_irq is
not initialized yet.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so we can merge io_apic_32.c and io_apic_64.c
v2: Use cpu_online_map as target cpus for bigsmp, just like 64-bit is doing.
Also remove some unused TARGET_CPUS macro.
v3: need to check if desc is null in smp_irq_move_cleanup
also migration needs to reset vector too, so copy __target_IO_APIC_irq
from 64bit.
(the duplication will go away once the two files are unified.)
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
but actually irq still needs to be less than NR_IRQS, because
interrupt[NR_IRQS] in entry.S.
need to enable per_cpu vector...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This has been deprecated for years, the user space irqbalanced utility
works better with numa, has configurable policies, etc...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
also print out irq no in /proc/interrups and /proc/stat in hex, so could
tell bus/dev/func.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
change names:
irq_desc() ==> irq_desc_alloc
__irq_desc() ==> irq_desc
Also split a few of the uses in lowlevel x86 code.
v2: need to check if desc is null in smp_irq_move_cleanup
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So we could remove some duplicated calling to irq_desc
v2: make sure irq_desc in init/main.c is not used without generic_hardirqs
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
remove irq limit checks - nr_irqs is dynamic and we expand anytime.
v2: fix checking about result irq_cfg_without_new, so could use msi again
v3: use irq_desc_without_new to check irq is valid
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are a handful of loops that go from 0 to nr_irqs and use
get_irq_desc() on them. These would allocate all the irq_desc
entries, regardless of the need for them.
Use the smarter for_each_irq_desc() iterator that will only iterate
over the present ones.
v2: make sure arch without GENERIC_HARDIRQS work too
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
based on Eric's patch ...
together mold it with dyn_array for irq_desc, will allcate kstat_irqs for
nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already.
v2: make sure system without generic_hardirqs works they don't have irq_desc
v3: fix merging
v4: [mingo@elte.hu] fix typo
[ mingo@elte.hu ] irq: build fix
fix:
arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow':
arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs'
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
preallocate 32 irq_2_pin entries, and use get_one_free_irq_2_pin() to get
one more and link to irq_cfg if needed.
so don't waste one where no irq is enabled.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
preallocate size is 32, and if it is not enough, irq_cfg will more
via alloc_bootmem() or kzalloc(). (depending on how early we are in
system setup)
v2: fix typo about size of init_one_irq_cfg ... should use sizeof(struct irq_cfg)
v3: according to Eric, change get_irq_cfg() to irq_cfg()
v4: squash add irq_cfg_alloc in
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array.
Get rid of irq_desc[] array assumptions.
Preallocate 32 irq_desc, and irq_desc() will try to get more.
( No change in functionality is expected anywhere, except the odd build
failure where we missed a code site or where a crossing commit itroduces
new irq_desc[] usage. )
v2: according to Eric, change get_irq_desc() to irq_desc()
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Until now, NR_IRQS was derived from black magic defines that had to
be "large enough" to both accomodate NR_CPUS and MAX_NR_IO_APICs.
This resulted in a way too large irq_desc[] array on most x86 systems.
Especially with larger CPU masks, the size of irq_desc can spiral out
of control quickly.
So be smarter about it and use precise allocation instead: determine the
default maximum possible IRQ number from the ACPI MADT. Use a minimum limit
of at least 32 IRQs for broken BIOSes.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix non-APIC UP build:
arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `pin_map_size'
arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `first_free_entry'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
also add first_free_entry and pin_map_size, which were NR_IRQS derived
constants.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so could spare some memory with small alignment in bootmem
also tighten the alignment checking, and make print out less debug info.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/acpi/boot.c💯 warning: 'acpi_mcfg_64bit_base_addr' defined
but not used
http://bugzilla.kernel.org/show_bug.cgi?id=11743
Signed-off-by: Pavel Vasilyev <linuxoid@tochka.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
arch/x86/kernel/pvclock.c:102:6: warning: symbol 'tsc_khz' shadows an earlier one
include/asm/tsc.h:18:21: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
We're currently facing timing problems in guests that do
calibration under heavy load, and then the load vanishes.
This means we'll have a much lower lpj than we actually should,
and delays end up taking less time than they should, which is a
nasty bug.
Solution is to pass on the lpj value from host to guest, and have it
preset.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM intends to use paravirt code to calibrate khz. Xen
current code will do just fine. So as a first step, factor out
code to pvclock.c.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Most if not all x86 platforms have an RTC device, but sometimes the RTC
is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI:
http://bugzilla.kernel.org/show_bug.cgi?id=11580https://bugzilla.redhat.com/show_bug.cgi?id=451188
It's best if we can discover the RTC via PNP because then we know
which flavor of device it is, where it lives, and which IRQ it uses.
But if we can't, we should register a platform device using the
compiled-in RTC_PORT/RTC_IRQ resource assumptions.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Reported-by: Rik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 4c3dc21b136f8cb4b72afee16c3ba7e961656c0b in tip introduced the
5-byte NOP ftrace_test_p6nop:
jmp . + 5
.byte 0x00, 0x00, 0x00
This is not friendly to disassemblers because an odd number of 0x00s
ends in the middle of an instruction boundary. This changes the 0x00s
to 1-byte NOPs (0x90).
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With latest -tip I get this bug:
[ 49.439988] in_atomic():0, irqs_disabled():1
[ 49.440118] INFO: lockdep is turned off.
[ 49.440118] Pid: 2814, comm: modprobe Tainted: G W 2.6.27-rc7 #4
[ 49.440118] [<c01215e1>] __might_sleep+0xe1/0x120
[ 49.440118] [<c01148ea>] ftrace_modify_code+0x2a/0xd0
[ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa
[ 49.440118] [<c016e80e>] __ftrace_update_code+0xfe/0x2f0
[ 49.440118] [<c01148a2>] ? ftrace_test_p6nop+0x0/0xa
[ 49.440118] [<c016f190>] ftrace_convert_nops+0x50/0x80
[ 49.440118] [<c016f1d6>] ftrace_init_module+0x16/0x20
[ 49.440118] [<c015498b>] load_module+0x185b/0x1d30
[ 49.440118] [<c01767a0>] ? find_get_page+0x0/0xf0
[ 49.440118] [<c02463c0>] ? sprintf+0x0/0x30
[ 49.440118] [<c034e012>] ? mutex_lock_interruptible_nested+0x1f2/0x350
[ 49.440118] [<c0154eb3>] sys_init_module+0x53/0x1b0
[ 49.440118] [<c0352340>] ? do_page_fault+0x0/0x740
[ 49.440118] [<c0104012>] syscall_call+0x7/0xb
[ 49.440118] =======================
It is because ftrace_modify_code() calls copy_to_user and
copy_from_user.
These functions have been inserted after guessing that there
couldn't be any race condition but copy_[to/from]_user might
sleep and __ftrace_update_code is called with local_irq_saved.
These function have been inserted since this commit:
d5e92e8978fd2574e415dc2792c5eb592978243d:
"ftrace: x86 use copy from user function"
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Could just as easily change the three casts to cast to the correct
type...this patch changes the type of ftrace_nop instead.
Supresses sparse warnings:
arch/x86/kernel/ftrace.c:157:14: warning: incorrect type in assignment (different signedness)
arch/x86/kernel/ftrace.c:157:14: expected long *static [toplevel] ftrace_nop
arch/x86/kernel/ftrace.c:157:14: got unsigned long *<noident>
arch/x86/kernel/ftrace.c:161:14: warning: incorrect type in assignment (different signedness)
arch/x86/kernel/ftrace.c:161:14: expected long *static [toplevel] ftrace_nop
arch/x86/kernel/ftrace.c:161:14: got unsigned long *<noident>
arch/x86/kernel/ftrace.c:165:14: warning: incorrect type in assignment (different signedness)
arch/x86/kernel/ftrace.c:165:14: expected long *static [toplevel] ftrace_nop
arch/x86/kernel/ftrace.c:165:14: got unsigned long *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The modification of code is performed either by kstop_machine, before
SMP starts, or on module code before the module is executed. There is
no reason to do the modifications from assembly. The copy to and from
user functions are sufficient and produces cleaner and easier to read
code.
Thanks to Benjamin Herrenschmidt for suggesting the idea.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mathieu Desnoyers revealed a bug in the original code. The nop that is
used to relpace the mcount caller can be a two part nop. This runs the
risk where a process can be preempted after executing the first nop, but
before the second part of the nop.
The ftrace code calls kstop_machine to keep multiple CPUs from executing
code that is being modified, but it does not protect against a task preempting
in the middle of a two part nop.
If the above preemption happens and the tracer is enabled, after the
kstop_machine runs, all those nops will be calls to the trace function.
If the preempted process that was preempted between the two nops is executed
again, it will execute half of the call to the trace function, and this
might crash the system.
This patch instead uses what both the latest Intel and AMD spec suggests.
That is the P6_NOP5 sequence of "0x0f 0x1f 0x44 0x00 0x00".
Note, some older CPUs and QEMU might fault on this nop, so this nop
is executed with fault handling first. If it detects a fault, it will then
use the code "0x66 0x66 0x66 0x66 0x90". If that faults, it will then
default to a simple "jmp 1f; .byte 0x00 0x00 0x00; 1:". The jmp is
not optimal but will do if the first two can not be executed.
TODO: Examine the cpuid to determine the nop to use.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86 now sets up the mcount locations through the build and no longer
needs to record the ip when the function is executed. This patch changes
the initial mcount to simply return. There's no need to do any other work.
If the ftrace start up test fails, the original mcount will be what everything
will use, so having this as fast as possible is a good thing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After "dumpstack: x86: various small unification steps", the
assembler gives the following compile error. The error is in
dumpstack_64.c.
{standard input}: Assembler messages:
{standard input}:720: Error: Incorrect register `%rbx' used with `l' suffix
{standard input}:1340: Error: Incorrect register `%r12' used with `l' suffix
Indeed the suffix in get_bp() was wrong.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
remove remainder of additional_cpus logic. We now just listen to the
disabled_cpus value like we did for years. disabled_cpus is always >=
0 so no need for an extra check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
additional_cpus=<x> parameter is dangerous and broken: for example
if we boot additional_cpus=-2 on a stock dual-core system it will
crash the box on bootup.
So reduce the maze of code a bit by removingthe user-configurability
angle.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
num_possible_cpus() can be > 1 when disabled CPUs have been accounted.
Disabled CPUs are not in the cpu_present_map, so we can use
num_present_cpus() as a safe indicator to switch to UP alternatives.
Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- define STACKSLOTS_PER_LINE and use it
- define get_bp macro to hide the %%ebp/%%rbp difference
- i386: check task==NULL in dump_trace, like x86_64
- i386: show_trace(NULL, ...) uses current automatically
- x86_64: use [#%d] for die_counter, like i386
- whitespace and comments
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- make kstack= and early_param
- add oops=panic, setting panic_on_oops
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- x86: Write log_lvl strings if available
- start raw stack dumps on new line
- i386: Remove extra indentation for raw stack dumps
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- i386 and x86_64: always printk the 'data' parameter
- i386: announce stack switch (irq -> normal)
- i386: check if there is a stack switch before announcing it
There is a warning that 'context' might come out corrupt in early
boot. If this is true it should be fixed, not worked around.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Add "end" parameter to valid_stack_ptr and print_context_stack
- use sizeof(long) as the size of a word on the stack
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- x86_64: use %p to print an address
- make i386-version the same as the above
The result should be the same on x86_64; on i386 the
output only changes if CONFIG_KALLSYMS is turned off,
in which case the address is printed twice.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For some reason die_nmi is still defined in traps.c for
i386, but is found in dumpstack_64.c for x86_64. Move it
to dumpstack_32.c
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
traps_32.c and traps_64.c are now equal. Move one to traps.c,
delete the other one and change the Makefile
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use CONFIG_X86_64/CONFIG_X86_32 to condtionally compile the
parts needed for x86_64 or i386 only.
Runs a small userspace for a number of minimal configurations
and boots the defconfigs.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use task_pid_nr(tsk) instead of tsk->pid in do_general_protection.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is the last user of clear_mem_error, which is defined
only on i386. Expand the inline function and remove it from
include/asm-x86/mach-default/mach_traps.h
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use preempt_conditional_sti/cli in do_int3, like on x86_64.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- rename variable me -> tsk
- get thread and tsk like i386
- expand used_math()
- copy comment
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- set_system_gate on i386 is really set_system_trap_gate
- set_system_gate on x86_64 is really set_system_intr_gate
- ist=0 means no special stack switch is done:
- introduce STACKFAULT_STACK, DOUBLEFAULT_STACK, NMI_STACK,
DEBUG_STACK and MCE_STACK as on x86_64.
- use the _ist variants with XXX_STACK set to zero
- remove set_system_gate
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
traps: x86: correct copy/paste bug: a trap is a GATE_TRAP
Fix copy/paste/forgot-to-edit bug in desc.h.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make the x86_64-version and the i386-version of do_debug
more similar.
- introduce preempt_conditional_sti/cli to i386. The preempt-count
is now elevated during the trap handler, like on x86_64. It
does not run on a separate stack, however.
- replace an open-coded "send_sigtrap"
- copy some comments
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mark the exception handlers with "dotraplinkage" to hide the
calling convention differences between i386 and x86_64.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86_64 does not do the lazy io-bitmap dance. Putting it in
its own function makes i386's do_general_protection look
much more like x86_64's.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Split out math_error from do_coprocessor_error and simd_math_error
from do_simd_coprocessor_error, like on i386. While at it, add the
"error_code" parameter to do_coprocessor_error, do_simd_coprocessor_error
and do_spurious_interrupt_bug.
This does not change the generated code, but brings the declarations in
line with all the other trap handlers.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
virt_addr_valid() calls __pa(), which calls __phys_addr(). With
CONFIG_DEBUG_VIRTUAL=y, __phys_addr() will kill the kernel if the
address *isn't* valid. That's clearly wrong for virt_addr_valid().
We also incorporate the debugging checks into virt_addr_valid().
Signed-off-by: Vegard Nossum <vegardno@ben.ifi.uio.no>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: allow number of additional hotplug CPUs to be set at compile time, V2
The default number of additional CPU IDs for hotplugging is determined
by asking ACPI or mptables how many "disabled" CPUs there are in the
system, but many systems get this wrong so that e.g. a uniprocessor
machine gets an extra CPU allocated and never switches to single CPU
mode.
And sometimes CPU hotplugging is enabled only for suspend/hibernate
anyway, so the additional CPU IDs are not wanted. Allow the number
to be set to zero at compile time.
Also, force the number of extra CPUs to zero if hotplugging is disabled
which allows removing some conditional code.
Tested on uniprocessor x86_64 that ACPI claims has a disabled processor,
with CPU hotplugging configured.
("After" has the number of additional CPUs set to 0)
Before: NR_CPUS: 512, nr_cpu_ids: 2, nr_node_ids 1
After: NR_CPUS: 512, nr_cpu_ids: 1, nr_node_ids 1
[Changed the name of the option and the prompt according to Ingo's
suggestion.]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The flag_is_changeable_p() is used by
has_cpuid_p() which can return different results
in the code sequence below:
if (!have_cpuid_p())
identify_cpu_without_cpuid(c);
/* cyrix could have cpuid enabled via c_identify()*/
if (!have_cpuid_p())
return;
Otherwise, the gcc 3.4.6 optimizes these two calls
into one which make the code not working correctly.
Cyrix cpus have the CPUID instruction enabled before
the second call to the have_cpuid_p() but
it is not detected due to the gcc optimization.
Thus the ARR registers (mtrr like) are not detected
on such a cpu.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the low-level function to dump user-passed registers on i386 is
called __show_registers() whereas on x86-64 it's called __show_regs(). Unify
the API to simplify porting of kmemcheck to x86-64.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add functions that use the infrastructure added by the x2apic code. These
functions were originally stubbed out since the UV code went into the
tree prior to the x2apic code.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 4a701737 ("x86: move prefill_possible_map calling early, fix")
is the wrong fix: prefill_possible_map() needs to be available
even when CONFIG_HOTPLUG_CPU is not set. A followon patch will do that.
Fix this correctly by making prefill_possible_map() available even when
CONFIG_HOTPLUG_CPU is not set. The function is needed so that
the number of possible CPUs can be determined.
Tested on uniprocessor machine with CPU hotplug disabled.
From boot log:
Before: NR_CPUS: 512, nr_cpu_ids: 512, nr_node_ids 1
After: NR_CPUS: 512, nr_cpu_ids: 1, nr_node_ids 1
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the size of the mappings of UV hub registers. Size must
be a function of the maximum node number within the SSI.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
