Currently 11d offload functionality is in reg_host_11d.c and
reg_host_11d.h files and are getting controlled with a
feature flag HOST_11D_SCAN.
HOST_11D_SCAN flag is to enable host 11d scan and 11d offload
feature should not be controlled with this flag.
Move 11d offload functionality to separate files
reg_offload_11d_scan.c and reg_offload_11d_scan.h and
compilation rule for these files.
Change-Id: I9bb73a5d995083cb746b76901a2db0d37a9b9827
CRs-Fixed: 2382525
As per new requirements to debug game latency related issues,
implement an iwpriv command which:
1) sends a bitmask to FW's Wireless Latency Manager module (WLM).
2) receives from WLM a measurement header along with measurement data.
3) converts both the header and data to a hexadecimal encoded string.
4) returns the hexadecimal encoded string to userspace
Change-Id: Ic79c4b757fe2d4e806306750250e3c102745c486
CRs-Fixed: 2388920
To reduce hard coding in the driver, add the following build config
options with defaults to the Kbuild:
* CONFIG_WLAN_MAX_PSOCS
* CONFIG_WLAN_MAX_PDEVS
* CONFIG_WLAN_MAX_VDEVS (supercedes CONFIG_SIR_MAX_SUPPORTED_BSS)
* CONFIG_WLAN_PSOC_MAX_VDEVS
* CONFIG_WLAN_PDEV_MAX_VDEVS
Change-Id: I14fce4bf34eb511214ad0b31be72336a2620b960
CRs-Fixed: 2393150
Flag WLAN_FEATURE_NAN_DATAPATH was added to protect NAN Datapath
related code, while WLAN_FEATURE_NAN_CONVERGENCE was added to
protect the converged code inside NAN Component. Since the
original NAN Discovery related code has now been moved inside
NAN component and NAN Datapath cannot exist without NAN Discovery,
keeping these flags separate doesn't make sense. Combine these
two flags with WLAN_FEATURE_NAN flag which is the original NAN
feature flag.
As a cleanup of NAN code, combine all NAN related flags with
WLAN_FEATURE_NAN flag.
Change-Id: If98ecaace17f8724e9c28325ef61e721f42e1d8f
CRs-Fixed: 2377375
Required sta interface to support to tx p2p action frames, this is
part of customer requirement.
Change-Id: I1ebebce4d70dcba34427bb2276cd3e1cc23c2bd8
CRs-Fixed: 2388414
When RX_PERFORMANCE is set, bind ol_rx_thread to perf CPU.
Do not update tdls stats and acquire rx_wakelock while
throughput is high, to avoid station drop packets caused
by slow process of ol_rx_data_cb(hdd_rx_packet_cbk).
Change-Id: I411f5ce67b04a70b194b0e8a7f8014b9c2c9bef7
CRs-Fixed: 2373936
Since all wni cfg is refactored based on legacy new cfg framework, no
legacy cfg files is needed now. Cleanup related files in this change.
Change-Id: If46ae4c59f1010a655aa65e3502fc0c660e33cdc
CRs-Fixed: 2383387
Remove g_self_recovery_stats and WE_GET_RECOVERY_STAT
Remove configs of CONFIG_SERIALIZATION_V1 part
Change-Id: I82e72f22215b8794517410e0b8892b5adadcf457
CRs-Fixed: 2386839
Implement a WAR to address a BT coex issue, along with a private ioctl
which can be used to switch the WAR on or off dynamically.
Change-Id: I9d29c141106db479039789d67c45a455e96a118b
CRs-Fixed: 2383150
Revert change I4e2a8d7f98907c205cc6988d8af309e7a5515b89 since
it introduced a build failure on some platforms along with an
inappropriately copyright change.
Change-Id: I1450c69211347afaa79642d99dd153f99f349694
CRs-Fixed: 2386432
Regulatory component is getting updated to reduce the
code size based on different regulatory features. In this
process new regulatory files are getting added and some
of the files are getting removed.
To compile the newly added files update the required changes
in driver Kbuild file.
Some of the functins which are not supposed to be invoked from
outside the component directly, replace those function calls
with the appropriate wrapper functions.
Change-Id: I31a25268250b99f4f156c4f149966213746d999e
CRs-Fixed: 2373780
When RX_PERFORMANCE is set, bind ol_rx_thread to perf CPU.
Do not update tdls stats and acquire rx_wakelock while
throughput is high, to avoid station drop packets caused
by slow process of ol_rx_data_cb(hdd_rx_packet_cbk).
Change-Id: I4e2a8d7f98907c205cc6988d8af309e7a5515b89
CRs-Fixed: 2373936
On QCS405 platform, it's observed that cds_ol_rx_pkt_freeq is empty
while receiving UDP packets, driver try to allocate cds_ol_rx_pkt in
ol_rx_data_process but failed. This leads to lots of frames got dropped.
Raise cds_ol_rx_thread scheduler policy to SCHED_RR to compete with
CE tasklet scheduler speed. With this change, found cds_ol_rx_pkt_freeq
is not going to be empty while receiving UDP packets.
Change-Id: I4bee3d69c2754ec6be10a2b623b4ebe8b2c0859b
CRs-Fixed: 2373936
Enable FEATURE_WLAN_FT_IEEE8021X and FEATURE_WLAN_FT_PSK for Genoa as
targeted kernel version is 4.4.
Change-Id: I599be887b0021e7f53622c840dc76d5e3b47376a
CRs-Fixed: 2359886
Enable QCA_AC_BASED_FLOW_CONTROL in Kbuild file for for all
lithium platform, including HST.
CRs-Fixed: 2371232
Change-Id: I7e755d6211106f4a5c8e9d87905f6425ece4c5c3
NAN component has been moved to CLD. It includes implementation
of the new NAN command QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
Change the legacy NAN implementation of vendor cmd
QCA_NL80211_VENDOR_SUBCMD_NAN so that the requests go
through the NAN component. Clean up the legacy path.
Functionality remains unchanged for legacy command.
Route the legacy NAN commands through the NAN component.
Change-Id: I542e5afe832619f8c088220cc4456aa7fe4416fd
CRs-Fixed: 2356772
TDLS component related files moved from hostcmn to CLD, this change
adds initial functions, enables TDLS in Kbuild.
Change-Id: Ie5b93f4785c4a973a139dff9e58460fd7ee35e35
CRs-Fixed: 2361589
Policy mgr component related files moved from hostcmn to CLD, this
change add its initializion functions to CLD framework, change Kbuild
to enable it.
Change-Id: I0a87d93b9cf639aa66a10f9ae55ef8cb1dfbb80e
CRs-Fixed: 2361570
Enable the unit test cases for qdf_types, recently added in
I7536a973141a6311662390e42da749f48239bef8.
Change-Id: I4264696d61443acf1bd0993f91de06119471b25f
CRs-Fixed: 2359296
P2P component related files moved from hostcmn to CLD, this change
adds initial functions, enables P2P in Kbuild.
Change-Id: I04102a5f3e59ded13ada15b1b417ae81c7a10e90
CRs-Fixed: 2361500
Implementation of Host driver support to collect per Vdev Beacon
reception Stats from firmware and display the stats in sysfs.
"adb shell cat /sys/class/net/wlan0/beacon_stats"
vdev id: 0
Total Beacon Count: 255
Total Beacon Miss Count: 21
Beacon Miss Bit map [0x800] [0x10000000] [0x22000400] [0x100]
[0x84000000] [0x4030002] [0x5034000] [0x28084]
Change-Id: Iadd31042320f7815a6a6f4733f5393dba93b5b3e
CRs-Fixed: 2360913
Replace legacy string in vdevmgr with ext string.
Also adds new compile CMN_VDEV_MLME_CMPT_ENABLE macro
for VDEV MLME component.
Change-Id: I40ce0c2ee4d653d2f4ce68093e8ad1b2c78bece8
CRs-Fixed: 2361525
NAN related OS IF, Target IF and component files have been
merged into CLD. Add Makefile changes, include correct
files, replace lmac tx/rx ops with the new ops and call
updated API's such as init/deinit.
Complete the remaining changes for moving NAN component
into CLD.
Change-Id: Idcf8816337aa49b399596ce3cdfc9cdab811d386
CRs-Fixed: 2338060
Change the policy & priority of RX thread to improve the RX throughput for
Specified platform.
Change-Id: Ie9df5de6f34d75264c4f3b7bdcb59ab92845a128
CRs-Fixed: 2354502
Enable the scatter gather feature for msm8996 platform to improve
the TCP TX throughput.
Change-Id: I634f48baf2f1f57aa89030acab37ada798ce7d2c
CRs-Fixed: 2344092
Add descriptor timestamp debug info in ol_tx_desc_t and
add APIs to set these values.
Change-Id: I686fccff4268811474630dbea8369fabe82d1517
CRs-Fixed: 2333654
Excessive logging detection was recently added via
If83c6dfccb9d191b02a3a7166b065c0a0704f969. While we would like to enable
this feature with a maximum number of logs per second of 100, there are
still a few outstanding problem areas, like dumping stats via IOCTL.
Instead enable the feature with a max of 500 to catch egregious
regressions, and plan to decrease this to 100 or less once the problem
areas are addressed.
Change-Id: I5b880c2354ec4828e1773eeb43de43a4649d4803
CRs-Fixed: 2340011
Enable the scatter-gather feature for wlan interface, if the wlan
interface is binding to the bridge, which might enable SG & TSO feature
for the bridge and improve the TCP TX throughput much better.
Change-Id: I26101756266878f9f41c5dc2d0b5dad189b44ee1
CRs-Fixed: 2246512
Add SCALE_INCLUDES CONFIG parameter to compile HALhwio.h for QCA6390
as msmhwio.h file is now deprecated.
Change-Id: I4a883101a0ba15d2ab1efcd7bde312e22099a693
CRs-Fixed: 2332023
Policy Manager component needs to adopt a new INI/CFG
infrastructure.
Provide a new infrastructure and remove old INI/CFGs related
to policy manager component.
CRs-Fixed: 2324393
Change-Id: Ia16845c2aef3c5877b0b164fcef13fe7cd41c736
ANDROID_BUILD_TOP variable is being deprecated and thus all paths are
assumed to be relative to the top directory.
However, this is causing problem when some of the paths are constructed
in the Android build system and used in the non-Android makefiles that
are usually executed NOT at the top directory but at a sub directory
using -C option. As a result, the relative path from the Android build
system become invalid in the non-Android makefiles.
In order to overcome the restriction, ANDROID_BUILD_TOP is manually
constructed when invoking the non-Android makefiles by using $$(pwd).
The non-Android makefiles are expected to construct the absolute path
by prepending ANDROID_BUILD_TOP to any path that came from the Android
build system.
Specifically, Kbuild is modified so that ANDROID_BUILD_TOP is prepended
to WLAN_ROOT and WLAN_COMMON_INC to make them absolute paths.
Change-Id: Ic34de7a2bc407153085eb3eb154d6dd71f04eedb
CRs-Fixed: 2328210
Featurize MCL only WMI APIs by compiling them as a separate source.
It enables profiles/configs to selectively compile the WMI APIs
based on whether the feature is required or not.
Featurize WMI APIs and TLVs that are specific to MCL -
- DSRC
- NAN
- P2P
- PMO
- roaming
- concurrency
- STA
- Generic MCL specific WMI (STA)
Change-Id: I3b005b8f60491c7d27cf221b7505116e1b9c1a38
CRs-Fixed: 2333916
Enable TSF for Adrastea arch on Vipertooth chip firstly and
expose TSF time mapping via file system
CRs-Fixed: 2320218
Change-Id: Ifda0d8035717ad21edb1a393ef32f1157ab59105
