Remove the legacy definitions that are related to the WEP
cfg.
Move them to mlme component
Change-Id: Ibcec8adf15123d12ad7c2eb6ed770b44a093673a
CRs-Fixed: 2324046
sme_is_conn_state_connected API is incorrectly places inside
FEATURE_BSS_TRANSITION ifdef causing compilation failure if the
flag FEATURE_BSS_TRANSITION is disabled.
Move sme_is_conn_state_connected outside of FEATURE_BSS_TRANSITION.
Change-Id: I3563d1e24f48990b0e16919a5ddaa9ed71bd53ac
CRs-Fixed: 2325332
When peer creation fails in wma_create_peer, vdev delete is sent
to the fw and then eWNI_SME_ADD_STA_SELF_RSP is sent to sme.
Here three error cases needs to be handled:
1. The vdev deletion has happened, but the cdp_detach_peer is
not done. So the data path peer remains. Also the vdev_active
flag that was set after vdev creation was not unset.
2. The eWNI_SME_ADD_STA_SELF_RSP msg handler
csr_process_add_sta_session_rsp invokes csr_roam_session_opened
which signals HDD that vdev is created successfully and hdd
calls hdd_vdev_ready and vdev related parameter set commands are
sent to FW for the deleted vdev.
3. Vdev delete is not sent for objmgr peer creation failure in
case of VDEV_TYPE_STA and release vdev object ref count.
Add cdp_vdev_detach() calls during error case and set the
vdev_active flag to false. Handle releasing vdev object ref
count in all needed error case flows.
Propagate the error in wma_vdev_attach() through
csr_roam_session_opened() to HDD and abort the vdev create.
Change-Id: Iec97122d011098fae7ae2a59864fbe8ca8a0980e
CRs-Fixed: 2322212
Need release cmd e_sme_command_del_sta_session before
hdd_sme_close_session_callback.
hdd_sme_close_session_callback will call
qdf_event_set(&adapter->qdf_session_close_event),
hdd_vdev_destroy will destroy vdev after qdf_session_close_event
completed, while csr_release_command will still access vdev.
Change-Id: Idc581bdd4f1d63b4903ee802326474ba83d528e5
CRs-Fixed: 2324616
Currently the number of scan entries populated from the scan results
of RRM issued scan for beacon report is limited to 4 entries in
sme_rrm_send_scan_result API. This is inspite of the fact that the
API sme_rrm_send_beacon_report_xmit_ind can handle more than 4 results
and will do the fragmentation of 4 results per frame before sending
it to the RRM.
Remove the limit of 4 entries in sme_rrm_send_scan_result and send
all the valid scan result entries to RRM.
Change-Id: I32448616a9e5f19ee816d60db8fef6e6c2f8908b
CRs-Fixed: 2321077
Currently when the supplicant sends a connect with bssid_hint and
prev_bssid, driver issues a roam_invoke (fast reassoc) command to the
FW. However, when this connect is received in the supplicant context
and if the driver is currently processing a disassoc/deauth from the
AP in the mc thread, then the CSR roam connection state would not be
associated but the HDD STA context connection state would still be
associated. In this scenario, since the disconnection is in progress
and VDEV Down might already be sent to the FW, the roam_invoke command
is ignored and FW does not send any response. However the driver
assumes that roaming is in progress and blocks all incoming scan/
connect requests from supplicant leading to a state where no further
connections can go through.
In hdd_reassoc, check the CSR Connection state also to check if
the current state is associated and then issue roam_invoke to FW.
Change-Id: I321e99b060d6ce22517a3dd604b0f4d08dd5918d
CRs-Fixed: 2319641
Restrict the band of PCL to the connected band if
intra band roaming is enabled
Change-Id: I78e9a29d7f8eb226e899e944e4d2980629c52a01
CRs-Fixed: 2302607
When station does LFR3 roaming, tdls will get an extra disconnection
notification which is wrong, remove the notification because tdls has
got the disconnection and connection event when roaming is successful.
Change-Id: I7bc56dae5fd653a44d8ac19be19083528c987d8b
CRs-Fixed: 2308503
Remove the legacy macro definitions that are related to the
mlme cfg.
Move them to wlan_mlme_public_struct.h
Change-Id: I64f474512463d3ba7ac238b2efd0f4cf2e36999b
CRs-Fixed: 2317750
vdev_id data type used in csr_scan_abort_mac_scan()
is declared as uint8_t and is compared with INVALID_VDEV_ID,
a 32 bit integer, which can never be true.
Change-Id: Id5ca042bf24fa3a3f683abae95f5c424824e230f
CRS-Fixed: 2315003
1. Set all MCL cmds as blocking cmds.
2. Rename WLAN_SER_CMD_STOP_BSS to WLAN_SER_CMD_VDEV_STOP_BSS.
3. Add new binary files and remove old binary files in Kbuild.
4. Disable CONFIG_SERIALIZATION_V1 in Kbuild, switch to new
serialization code.
Change-Id: I46f876e4cbc31881ca0559e4705cddf4a26a46c1
CRs-Fixed: 2315411
If SSR during sme close session when interface down and vdev
destroy, qdf_session_close_event is completed forcely before
peer detached, vdev becomes LOGICALLY_DELETED instead of
destroyed actually for peer ref count is held.
When bss is deleted and eWNI_SME_JOIN_RSP is handled,
is_disconnect_pending-> csr_nonscan_pending_ll_next is called,
wlan_objmgr_get_vdev_by_id_from_psoc return NULL, cmd.vdev is
NULL, NULL pointer dereference will happen.
Change-Id: I790a12483c2b9f967da9ced387935f93a6168e81
CRs-Fixed: 2316960
Implement the usage of MLME CFG infra for BSS Scoring related INI Items
and remove the older INI definitions from HDD.
Change-Id: I0db69138f0439131916a38176b5b21b706ff3671
CRs-Fixed: 2318320
This reverts the change-Id: Iec7423809f5225de9b5c4d08d7806a8a2a9dfe06.
Advertise the min of self TxBF CSN and APs TxBF CSN value to
fix the IOT issue with the AP.
Change-Id: Ifd344bfd3cb6ca5a18d356b888d85bd100d4194d
CRs-Fixed: 2312098
Currently CSR session PMK is updated from the set_key command from
supplicant after successful 8 way handshake with the AP. However,
in case of roaming to an AP which already has the PMKID cached, the
Roam Sync happens with Auth Status Authenticated and set_key from the
supplicant does not happen. In this case, the value in the CSR session
PMK is incorrect and is the PMK of the previous AP before roaming.
After this scenario, if any RSO command is sent to the FW, the incorrect
PMK is sent as part of the RSO command updating the FW with incorrect
PMK for the current AP. The next time a roaming happens to the same AP,
then the 4 way handshake fails and fallback to 8 way handshake happens.
Update the PMK in CSR session for the current AP from PMKID cache
during Roam Sync propagation, if the Auth Status is authenticated.
Change-Id: I3ced7d0fd75379ede01cf9f993f5beefbb20cda1
CRs-Fixed: 2313289
PMK caching and OKC is valid only in non CCKM roaming scenarios.
If these parameters passed to FW in CCKM case then device may add the
PMKID in reassoc request frames which is not expected.
So reset 11i parameters in RSO command if the authentication type is
CCKM.
Change-Id: I32bdb288e7fa557f133b7f311f51d85d57ff659b
CRs-Fixed: 2306038
In the scheduler_post_message, src_id is now added to
know the source module of the msg. the present scheduler
doesn't know about the same which is scheduler_post_msg
Replace the scheduler_post_msg with scheduler_post_message
Change-Id: If929a98b8b9d5b1b9c8f0291876e410a3dfbdf49
CRs-Fixed: 2305983
As a part of the cfg80211_get_station command, the driver sends TX stats
(tx rate, MCS index, NSS and flags). Currently there is no support to
send the similar RX stats.
Add support to send RX stats to the framework.
Change-Id: Ic66596d118ad1395706db7638da1b4fdef7dc2d5
CRs-Fixed: 2303306
Add the MBO ini configs to mlme for the following:
1. CFG_MBO_CANDIDATE_RSSI_THRESHOLD
2. CFG_MBO_CURRENT_RSSI_THRESHOLD
3. CFG_MBO_CUR_RSSI_MCC_THRESHOLD
4. CFG_MBO_CAND_RSSI_BTC_THRESHOLD
Change-Id: I9e779c912538973c8281170ec8c212a4f05b7e2e
CRs-Fixed: 2314168
Since refined mlme sta configures based on converged cfg component,
apply mlme sta configurations, remove related legacy codes.
Change-Id: Ia5989a29378bf33e3c9550a0ae26338aeb966592
CRs-Fixed: 2312079
Remove the legacy INI code from hdd_cfg. Replace the existing
access from hdd_config with new mlme api.
Change-Id: Iddde15330c1ad39a59bd9a3c7ea86af971df61b5
CRs-Fixed: 2313296
Currently user can not configure HE STS capability through
INI, use gTxBFCsnValue that share same INI with VHT to achieve
it.
Change-Id: Ia83462113cdf06e0af8b9f00c968745363aba9b4
CRs-Fixed: 2306083
Logging macros already print function name by default,
there is no need to print the function name again as part of the log.
Hence, remove the function name or
wherever required use '"%s...", __func__'
Change-Id: Ib6dc6cc03ef148146b1c626271d5ac3b7345c4bb
CRs-Fixed: 2312593
We are transitioning to new logging infrastructure
by using existing mtrace functionality.
Add new logging for complete P2P module.
Change-Id: If49d66ea42a48be0ac6c7a8b4c91d69ebd5fcef9
CRs-Fixed: 2308618
Remove the legacy ini config values defined in hdd_cfg.
Call the mlme cfg get api to retrieve chainmask config values.
Remove the tx_chainmask_cck from cds_config as mlme object is
not initialized during cds_open. Call mlme cfg api during
wma_open to populate the tx_chainmask_cck value.
Change-Id: If48aeb62cf35e2e604be2b72845b8e98c5c313dc
CRs-Fixed: 2310382
csr_nonscan_pending_ll_remove_entry() is not a correct API to
remove command from non-scan pending queue, it always return
false and fail to insert command to local list.
The correct API to remove an entry is csr_release_command(), no
need to check entry when insert to local list.
Remove the wrong API csr_nonscan_pending_ll_remove_entry().
Change-Id: I6c81f5d4ae57ceb6ebf2eec0a63859d0c1f12cb1
CRs-Fixed: 2308863
Add debugfs entry to get last five roam scan stats info which includes
old bssid, new bssid, roaming candidates etc., for STA interface.
Change-Id: Ied66beb270d97b6e17a6116c1be0e82783094519
CRs-Fixed: 2203885
The driver always allow roaming command ROAM_SCAN_OFFLOAD_UPDATE_CFG
even through session roaming not "started" in CSR.
But WMA will always enable Roam_scan_mode to non-zero
to FW when handle the command ROAM_SCAN_OFFLOAD_UPDATE_CFG.
The inconsistency is the CSR still keep as roaming stopped
status but WMA enable the roaming on session.
In STA+STA case, there will cause two vdev roam mode enabled in Firmware
because the CSR roaming start state does not keep sync with FW.
Fix by enable FW roam only based on enable state from CSR
when handle the ROAM_SCAN_OFFLOAD_UPDATE_CFG in WMA.
Change-Id: I95a2bd1edd88cc241ae9821a6e0756c44663229a
CRs-Fixed: 2305594
Make the following updates to the extscan reset significant change
logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
Change-Id: I9b63924f4219f6d3567e3ee2b1a31e1a9ce3bc29
CRs-Fixed: 2309570
Add debugfs entry to get connect info (bssid, ssid, freq etc.,)
for STA interface.
Change-Id: Id5c350dbb4ca9b9f6b203459adee59b2d5e94f67
CRs-Fixed: 2203654
P2P Listen offload is not a requirement for Genoa, hence featurize
P2P listen offload code to save memory foot-print for Genoa.
Change-Id: If50c784bb4cd6daac513a0654364e78cd636c9d3
CRs-Fixed: 2304554
