Commit Graph

475 Commits

Author SHA1 Message Date
Alexey Dobriyan
d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
David J. Wilder
85f20b39fd RDMA/addr: Fix resolution of local IPv6 addresses
This patch allows a local IPv6 address to be resolved by rdma_cm.

To reproduce the problem:

 $ rping -s -v -a ::0  &
 $ rping -c -v -a <IPv6 address local to this system>
 rdma_resolve_addr error -1

Local IPv6 address was obtained with "ip addr show ib0"

Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=1759
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07 16:03:18 -07:00
Steve Wise
54e05f15cc RDMA/iwcm: Don't call provider reject func with irqs disabled
In commit cb58160e ("RDMA/iwcm: Reject the connection when the cm_id
is destroyed") a call to the provider's reject handler was added to
destroy_cm_id() to fix a provider endpoint leak.  This call needs to
be done with interrupts enabled.  So unlock and relock around this
call.  This is safe because:

1) the provider will do nothing with this endpoint until the iwcm either
   accepts or rejects.
2) the lock is only released after the iwcm state is changed, so an
   errant iwcm app that is destroying -and- rejecting the connection
   concurrently will get a failure on one of the calls.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-07 15:38:12 -07:00
Alexey Dobriyan
a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Roland Dreier
0e442afd92 IB/mad: Fix lock-lock-timer deadlock in RMPP code
Holding agent->lock across cancel_delayed_work() (which does
del_timer_sync()) in ib_cancel_rmpp_recvs() leads to lockdep reports of
possible lock-timer deadlocks if a consumer ever does something that
connects agent->lock to a lock taken in IRQ context (cf
http://marc.info/?l=linux-rdma&m=125243699026045).

Fix this by changing the list items to a new state "CANCELING" while
holding the lock, and then canceling the delayed work without holding
the lock.  If the delayed work runs after the lock is dropped, it will
see the state is CANCELING and return immediately, so the list will
stay stable while we traverse it with the lock not held.

Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-23 11:10:15 -07:00
Roland Dreier
73f526da02 Merge branch 'mad' into for-linus
Conflicts:
	drivers/infiniband/core/mad.c
2009-09-10 21:19:45 -07:00
Steve Wise
cb58160e72 RDMA/iwcm: Reject the connection when the cm_id is destroyed
If the cm_id of a connect request is destroyed prior to the ULP
accepting or rejecting the connection, then the provider never cleans
up the connection.  The iwcm should explicitly reject these
connections if the cm_id is destroyed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-09 11:37:38 -07:00
Hal Rosenstock
b76aabc395 IB/mad: Allow tuning of QP0 and QP1 sizes
MADs are UD and can be dropped if there are no receives posted, so
allow receive queue size to be set with a module parameter in case the
queue needs to be lengthened.  Send side tuning is done for symmetry
with receive.

Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-07 08:28:48 -07:00
Roland Dreier
6b2eef8fd7 IB/mad: Fix possible lock-lock-timer deadlock
Lockdep reported a possible deadlock with cm_id_priv->lock,
mad_agent_priv->lock and mad_agent_priv->timed_work.timer; this
happens because the mad module does

	cancel_delayed_work(&mad_agent_priv->timed_work);

while holding mad_agent_priv->lock.  cancel_delayed_work() internally
does del_timer_sync(&mad_agent_priv->timed_work.timer).

This can turn into a deadlock because mad_agent_priv->lock is taken
inside cm_id_priv->lock, so we can get the following set of contexts
that deadlock each other:

 A: holding cm_id_priv->lock, waiting for mad_agent_priv->lock
 B: holding mad_agent_priv->lock, waiting for del_timer_sync()
 C: interrupt during mad_agent_priv->timed_work.timer that takes
    cm_id_priv->lock

Fix this by using the new __cancel_delayed_work() interface (which
internally does del_timer() instead of del_timer_sync()) in all the
places where we are holding a lock.

Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=13757
Reported-by: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-07 08:27:50 -07:00
Jack Morgenstein
b1b8afb833 IB/uverbs: Return ENOSYS for unimplemented commands (not EINVAL)
Since the original commit 883a99c7 ("[IB] uverbs: Add a mask of device
methods allowed for userspace"), the uverbs core returns EINVAL for
commands not implemented by a specific low-level driver.

This creates a problem that there is no way to tell the difference
between an unimplemented command and an implemented one which is
incorrectly invoked (which also returns EINVAL).

The fix is to have unimplemented commands return ENOSYS.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00
Yossi Etigin
e1d7806df3 IB/core: Fix send multicast group leave retry
Until now, retries were only sent when joining a multicast group. This
patch will adds retries when leaving a multicast group as well.

Signed-off-by: Ron Livne <ronli@voltaire.com>
Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00
Roland Dreier
6276e08a9b IB: Use DEFINE_SPINLOCK() for static spinlocks
Rather than just defining static spinlock_t variables and then
initializing them later in init functions, simply define them with
DEFINE_SPINLOCK() and remove the calls to spin_lock_init().  This cleans
up the source a tad and also shrinks the compiled code; eg on x86-64:

add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-40 (-40)
function                                     old     new   delta
ib_uverbs_init                               336     326     -10
ib_mad_init_module                           147     137     -10
ib_sa_init                                   123     103     -20

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:23 -07:00
Roland Dreier
60f2b652f5 IB/mad: Check hop count field in directed route MAD to avoid array overflow
The hop count field in a directed route MAD is only allowed to be in the
range 0 to 63 (by spec).  Check that this really is the case to avoid
accessing outside the bounds of the hop array.

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:10 -07:00
Peter Huewe
716abb1fdf RDMA: Add __init/__exit macros to addr.c and cma.c
Add __init and __exit annotations to the module_init/module_exit
functions from drivers/infiniband/core/addr.c and cma.c.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-06-23 10:38:42 -07:00
Greg Kroah-Hartman
3f7c58a05f infiniband: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.


Cc: general@lists.openfabrics.org
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Yossi Etigin
d2ca39f262 RDMA/cma: Create cm id even when IB port is down
When doing rdma_resolve_addr(), if the relevant IB port is down, the
function fails and the cm_id is not bound to the correct device.
Therefore, application does not have a device handle and cannot wait
for the port to become active.  The function fails because the
underlying IPoIB interface is not joined to the broadcast group and
therefore the SA does not have a multicast record to take a Q_Key
from.

The fix is to use lazy Q_Key resolution - cma_set_qkey() will set
id_priv->qkey if it was not set, and will be called just before the
Q_Key is really required.

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-08 13:42:33 -07:00
Yossi Etigin
84adeee9aa RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups
When joining an IPoIB multicast group, use the same rate as in the
broadcast group.  Otherwise, if the RDMA CM creates this group before
IPoIB does, it might get a different rate.  This will cause IPoIB to
fail joining to the same group later on, because IPoIB uses strict
rate selection.

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-01 13:55:32 -07:00
Roland Dreier
09f98bafea Merge branches 'cxgb3', 'endian', 'ipath', 'ipoib', 'iser', 'mad', 'misc', 'mlx4', 'mthca', 'nes' and 'sysfs' into for-next 2009-03-24 20:44:41 -07:00
Roland Dreier
6432f36684 IB: Remove useless ibdev_is_alive() tests from sysfs code
Some attribute show functions test ibdev_is_alive() to make sure that
it's OK to access device state.  However, the sysfs attributes will
not be registered until the device is fully initialized, and they'll
be unregistered before anything is torn down, so ibdev_is_alive()
doesn't do anything useful.  Remove it.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-04 15:22:39 -08:00
Jack Morgenstein
6b708b3dde IB/sa_query: Fix AH leak due to update_sm_ah() race
Our testing uncovered a race condition in ib_sa_event():

	spin_lock_irqsave(&port->ah_lock, flags);
	if (port->sm_ah)
		kref_put(&port->sm_ah->ref, free_sm_ah);
	port->sm_ah = NULL;
	spin_unlock_irqrestore(&port->ah_lock, flags);

	schedule_work(&sa_dev->port[event->element.port_num -
				    sa_dev->start_port].update_task);

If two events occur back-to-back (e.g., client-reregister and LID
change), both may pass the spinlock-protected code above before the
scheduled work updates the port->sm_ah handle.  Then if the scheduled
work ends up running twice, the second operation will then find a
non-NULL port->sm_ah, and will simply overwrite it in update_sm_ah --
resulting in an AH leak.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03 14:30:01 -08:00
Ralph Campbell
4780c1953f IB/mad: Fix ib_post_send_mad() returning 0 with no generate send comp
If ib_post_send_mad() returns 0, the API guarantees that there will be
a callback to send_buf->mad_agent->send_handler() so that the sender
can call ib_free_send_mad().  Otherwise, the ib_mad_send_buf will be
leaked and the mad_agent reference count will never go to zero and the
IB device module cannot be unloaded.  The above can happen without
this patch if process_mad() returns (IB_MAD_RESULT_SUCCESS |
IB_MAD_RESULT_CONSUMED).

If process_mad() returns IB_MAD_RESULT_SUCCESS and there is no agent
registered to receive the mad being sent, handle_outgoing_dr_smp()
returns zero which causes a MAD packet which is at the end of the
directed route to be incorrectly sent on the wire but doesn't cause a
hang since the HCA generates a send completion.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03 14:22:17 -08:00
Ralph Campbell
d9620a4c82 IB/mad: initialize mad_agent_priv before putting on lists
There is a potential race in ib_register_mad_agent() where the struct
ib_mad_agent_private is not fully initialized before it is added to
the list of agents per IB port. This means the ib_mad_agent_private
could be seen before the refcount, spin locks, and linked lists are
initialized.  The fix is to initialize the structure earlier.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27 14:44:32 -08:00
Ralph Campbell
1d9bc6d648 IB/mad: Fix null pointer dereference in local_completions()
handle_outgoing_dr_smp() can queue a struct ib_mad_local_private
*local on the mad_agent_priv->local_work work queue with
local->mad_priv == NULL if device->process_mad() returns
IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY and
(!ib_response_mad(&mad_priv->mad.mad) ||
!mad_agent_priv->agent.recv_handler).

In this case, local_completions() will be called with local->mad_priv
== NULL. The code does check for this case and skips calling
recv_mad_agent->agent.recv_handler() but recv == 0 so
kmem_cache_free() is called with a NULL pointer.

Also, since recv isn't reinitialized each time through the loop, it
can cause a memory leak if recv should have been zero.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
2009-02-27 10:34:30 -08:00
Roland Dreier
9206dff157 IB: Remove sysfs files before unregistering device
Move the ib_device_unregister_sysfs() call from ib_dealloc_device() to
ib_unregister_device().  The old code allows device unregister to
proceed even if some sysfs files are open, which leaves a window where
userspace can open a file before a device is removed but then end up
reading the file after the device is removed, which leads to various
kernel crashes either because the device data structure is freed or
because the low-level driver code is gone after module removal.

By not returning from ib_unregister_device() until after all sysfs
entries are removed, we make sure that data structures and/or module
code is not freed until after all sysfs access is done.

Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-25 13:27:46 -08:00
Harvey Harrison
9c3da09917 IB: Remove __constant_{endian} uses
The base versions handle constant folding just fine, use them
directly.  The replacements are OK in the include/ files as they are
not exported to userspace so we don't need the __ prefixed versions.

This patch does not affect code generation at all.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-17 17:11:57 -08:00
Kay Sievers
d927e38c6c infiniband: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:39 -08:00
Roland Dreier
2c4ab6243f RDMA/addr: Fix build breakage when IPv6 is disabled
Commit 38617c64 ("RDMA/addr: Add support for translating IPv6
addresses") broke the build when CONFIG_IPV6=n, because the ib_addr
module unconditionally attempted to call ipv6_chk_addr() and other
IPv6 functions that are not defined when IPv6 is disabled.  Fix this
by only building IPv6 support if CONFIG_IPV6 is turned on, and
add a Kconfig dependency to prevent the ib_addr code from being built
in when IPv6 is built modular.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-29 23:37:14 -08:00
Linus Torvalds
0191b625ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28 12:49:40 -08:00
Aleksey Senin
1f5175adea RDMA/cma: Add IPv6 support
Handle AF_INET6 cases where required, and use struct sockaddr_storage
wherever an IPv6 address might be stored.

Signed-off-by: Aleksey Senin <aleksey@alst60.(none)>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24 10:16:45 -08:00
Aleksey Senin
38617c64bf RDMA/addr: Add support for translating IPv6 addresses
Add support for translating AF_INET6 addresses to the IB address
translation service.  This requires using struct sockaddr_storage
instead of struct sockaddr wherever an IPv6 address might be stored,
and adding cases to handle IPv6 in addition to IPv4 to the various
translation functions.

Signed-off-by: Aleksey Senin <aleksey@alst60.(none)>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24 10:16:37 -08:00
David S. Miller
9eeda9abd1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/ath5k/base.c
	net/8021q/vlan_core.c
2008-11-06 22:43:03 -08:00
Al Viro
233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Harvey Harrison
5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison
8867cd7c86 infiniband: use %p6 for printing message ids
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 23:02:35 -07:00
Linus Torvalds
724bdd097e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
  IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
  IPoIB: Set netdev offload features properly for child (VLAN) interfaces
  IPoIB: Clean up ethtool support
  mlx4_core: Add Ethernet PCI device IDs
  mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
  mlx4_core: Multiple port type support
  mlx4_core: Ethernet MAC/VLAN management
  mlx4_core: Get ethernet MTU and default address from firmware
  mlx4_core: Support multiple pre-reserved QP regions
  Update NetEffect maintainer emails to Intel emails
  RDMA/cxgb3: Remove cmid reference on tid allocation failures
  IB/mad: Use krealloc() to resize snoop table
  IPoIB: Always initialize poll_timer to avoid crash on unload
  IB/ehca: Don't allow creating UC QP with SRQ
  mlx4_core: Add QP range reservation support
  RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
2008-10-23 08:16:03 -07:00
Roland Dreier
56f2fdaade Merge branches 'cma', 'cxgb3', 'ehca', 'ipoib', 'mad', 'mlx4' and 'nes' into for-next 2008-10-22 15:56:41 -07:00
Parag Warudkar
01e8ef11bc x86: sysfs: kill owner field from attribute
Tejun's commit 7b595756ec made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt  to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:42 -07:00
Greg Kroah-Hartman
91bd418fdc device create: infiniband: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:42 -07:00
Roland Dreier
528051746b IB/mad: Use krealloc() to resize snoop table
Use krealloc() instead of kmalloc() followed by memcpy() when resizing
the MAD module's snoop table.

Also put parentheses around the new table size to avoid calculating
the wrong size to allocate, which fixes a bug pointed out by Haven
Hash <haven.hash@isilon.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-14 14:05:36 -07:00
Julien Brunel
6aea938f54 RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
In case of error, the function ucma_alloc_multicast() returns a NULL
pointer, but never returns an ERR pointer.  So after a call to this
function, an IS_ERR test should be replaced by a NULL test.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match bad_is_err_test@
expression x, E;
@@

x = ucma_alloc_multicast(...)
... when != x = E
IS_ERR(x)
// </smpl>

Signed-off-by:  Julien Brunel <brunel@diku.dk>
Signed-off-by:  Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10 12:00:19 -07:00
Roland Dreier
eedd5d0a70 Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', 'mlx4', 'mthca' and 'nes' into for-next 2008-10-09 17:41:15 -07:00
Hefty, Sean
a7e80ce26c IB/cm: Correctly free cm_device structure
commit 110cf374 ("infiniband: make cm_device use a struct device and
not a kobject.") introduced a memory leak, since it deleted
cm_release_dev_obj(), which was where cm_dev was freed.  Fix this by
freeing the leaked structure after calling device_unregister().

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30 10:36:54 -07:00
Michael Brooks
7097228c54 IB/mad: Don't discard BMA responses in kernel
This fixes the problem of incoming BMA responses being dropped due to
a bad "is response" check.  Fix the test to use the ib_response_mad()
predicate, which correctly handles BMA MADs.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=988>.

Signed-off-by: Michael Brooks <michael.brooks@qlogic.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20 20:06:16 -07:00
Roland Dreier
06a91a02e9 Merge branches 'cma', 'cxgb3', 'ipath', 'ipoib', 'mad' and 'mlx4' into for-linus 2008-08-07 14:12:03 -07:00
Julien Brunel
cd55ef5a10 IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULL
In case of error, the function ib_create_send_mad() returns an ERR
pointer, but never returns a NULL pointer.  So testing the return
value for error should be done with IS_ERR, not by comparing with
NULL.

A simplified version of the semantic patch that makes this change is
as follows:

(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@correct_null_test@
expression x,E;
statement S1, S2;
@@
x = ib_create_send_mad(...)
<... when != x = E
if (
(
- x@p2 != NULL
+ ! IS_ERR ( x )
|
- x@p2 == NULL
+ IS_ERR( x )
)
 )
S1
else S2
...>
? x = E;
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-07 14:11:56 -07:00
Roland Dreier
3f44675439 RDMA/cma: Remove padding arrays by using struct sockaddr_storage
There are a few places where the RDMA CM code handles IPv6 by doing

	struct sockaddr		addr;
	u8			pad[sizeof(struct sockaddr_in6) -
				    sizeof(struct sockaddr)];

This is fragile and ugly; handle this in a better way with just

	struct sockaddr_storage	addr;

[ Also roll in patch from Aleksey Senin <alekseys@voltaire.com> to
  switch to struct sockaddr_storage and get rid of padding arrays in
  struct rdma_addr. ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04 11:02:14 -07:00
Roland Dreier
5ba18b186c RDMA/ucm: BKL is not needed for ib_ucm_open()
Remove explicit cycle_kernel_lock() call and document why the code is safe.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:36:59 -07:00
Roland Dreier
f7a6117ee5 RDMA/ucma: BKL is not needed for ucma_open()
Remove explicit lock_kernel() calls and document why the code is safe.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:36:59 -07:00
Linus Torvalds
5c402355ad Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  MAINTAINERS: Remove Glenn Streiff from NetEffect entry
  mlx4_core: Improve error message when not enough UAR pages are available
  IB/mlx4: Add support for memory management extensions and local DMA L_Key
  IB/mthca: Keep free count for MTT buddy allocator
  mlx4_core: Keep free count for MTT buddy allocator
  mlx4_code: Add missing FW status return code
  IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg
  mlx4_core: Add module parameter to enable QoS support
  RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes
  IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures
  IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()
  IB/ehca: Release mutex in error path of alloc_small_queue_page()
  IB/ehca: Use default value for Local CA ACK Delay if FW returns 0
  IB/ehca: Filter PATH_MIG events if QP was never armed
  IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event
  RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event
  RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
2008-07-24 12:56:07 -07:00
Roland Dreier
2cc177364e Merge branches 'bkl-removal', 'cma', 'ehca', 'for-2.6.27', 'mlx4', 'mthca' and 'nes' into for-linus 2008-07-24 08:38:47 -07:00