Commit Graph

33709 Commits

Author SHA1 Message Date
Yang Hongyang
50cf156af7 dma-mapping: replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40)
Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Eric Miao
a7bb3909b3 spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases
Most SPI peripherals use GPIOs as their chip selects, introduce .gpio_cs
for this.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:07 -07:00
Wolfgang Muees
93b61bddc1 Blackfin SPI Driver: Make mmc_spi driver work on Blackfin
1. Rewrite of the non-dma data transfer functions to use only ONE mode
   of TIMOD (TIMOD=0x1).  With TIMOD=0, it was not possible to set the TX
   bit pattern.  So the TDBR = 0xFFFF inside the read calls won't work.

2. Clear SPI_RDBR before reading and before duplex transfer.
   Otherwise the garbage data in RDBR will get read.  Since mmc_spi uses a
   lot of duplex transfers, this is the main cause of mmc_spi failure.

3. Poll RXS for transfer completion.  Polling SPIF or TXS cannot
   guarantee transfer completion.  This may interrupt a transfer before it
   is finished.  Also this may leave garbage data in buffer and affect
   next transfer.

[Yi Li <yi.li@analog.com>: add a field "u16 idle_tx_val" in "struct
bfin5xx_spi_chip" to specify the value to transmit if no TX value
is supplied.]
Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:06 -07:00
Michael Hennerich
42c78b2bf5 Blackfin SPI Driver: Add GPIO controlled SPI Slave Select support
Add support for GPIO controlled SPI Chip Selects.  To make use of this
feature, set chip_select = 0 and add a proper cs_gpio to your
controller_data.

struct spi_board_info
        .chip_select = 0

struct bfin5xx_spi_chip
        .cs_gpio = GPIO_P###

There are various SPI devices that require SPI MODE_0, and need to have
the Chip Selects asserted during the entire transfer.  Consider using
SPI_MODE_3 (SPI_CPHA | SPI_CPOL) if your device allows it.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:06 -07:00
Michael Hennerich
7513e006c6 Blackfin SPI Driver: Fix erroneous SPI Clock divisor calculation
Fix erroneous SPI Clock divisor calculation.  Make sure SPI_BAUD is always
>= 2.  Writing a value of 0 or 1 to the SPI_BAUD register disables the
serial clock.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:04 -07:00
Linus Torvalds
44d84afa83 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits)
  powerpc: Fix oops when loading modules
  powerpc: Wire up preadv and pwritev
  powerpc/ftrace: Fix printf format warning
  powerpc/ftrace: Fix #if that should be #ifdef
  powerpc: Fix ptrace compat wrapper for FPU register access
  powerpc: Print information about mapping hw irqs to virtual irqs
  powerpc: Correct dependency of KEXEC
  powerpc: Disable VSX or current process in giveup_fpu/altivec
  powerpc/pseries: Enable relay in pseries_defconfig
  powerpc/pseries: Fix ibm,client-architecture comment
  powerpc/pseries: Scan for all events in rtasd
  powerpc/pseries: Add dispatch dispersion statistics
  powerpc: Clean up some prom printouts
  powerpc: Print progress of ibm,client-architecture method
  powerpc: Remove duplicated #include's
  powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook
  powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf
  fsl-diu-fb: Pass the proper device for dma mapping routines
  powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
  cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.
  ...
2009-04-07 07:40:55 -07:00
Paul Mackerras
11b55da700 powerpc: Fix oops when loading modules
This fixes a problem reported by Sean MacLennan where loading any
module would cause an oops.  We weren't marking the pages containing
the module text as having hardware execute permission, due to a bug
introduced in commit 8d1cf34e ("powerpc/mm: Tweak PTE bit combination
definitions"), hence trying to execute the module text caused an
exception on processors that support hardware execute permission.

This adds _PAGE_HWEXEC to the definitions of PAGE_KERNEL_X and
PAGE_KERNEL_ROX to fix this problem.

Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:01 +10:00
Stephen Rothwell
1a917bb549 powerpc: Wire up preadv and pwritev
[paulus@samba.org: changed to use syscall numbers 320 and 321 since
 perf_counters is currently using 319.]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:00 +10:00
Michael Ellerman
7ddb7ad11f powerpc/ftrace: Fix printf format warning
'tramp' is an unsigned long, so print it with %lx.

Fixes the following build warning:
arch/powerpc/kernel/ftrace.c:291: error: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘long unsigned int’

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:00 +10:00
Michael Ellerman
f4952f6cbe powerpc/ftrace: Fix #if that should be #ifdef
Commit bb7253403f ("powerpc64,
ftrace: save toc only on modules for function graph"), added an
#if CONFIG_PPC64.  This changes it to #ifdef.

Fixes the following warning on 32-bit builds:
 arch/powerpc/kernel/ftrace.c:562:5: error: "CONFIG_PPC64" is not defined

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:00 +10:00
Michael Neuling
bc826666e4 powerpc: Fix ptrace compat wrapper for FPU register access
The ptrace compat wrapper mishandles access to the fpu registers.  The
PTRACE_PEEKUSR and PTRACE_POKEUSR requests miscalculate the index into
the fpr array due to the broken FPINDEX macro.  The
PPC_PTRACE_PEEKUSR_3264 request needs to use the same formula that the
native ptrace interface uses when operating on the register number (as
opposed to the 4-byte offset).  The PPC_PTRACE_POKEUSR_3264 request
didn't take TS_FPRWIDTH into account.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:00 +10:00
Michael Ellerman
c7d07fdd5a powerpc: Print information about mapping hw irqs to virtual irqs
The irq remapping layer seems to cause some confusion when people
see a different irq number in /proc/interrupts vs the one they
request in their driver or DTS.

So have the irq remapping layer print out a message when we map an
irq. The message is only printed the first time the irq is mapped,
and it's KERN_DEBUG so most people won't see it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:00 +10:00
Geert Uytterhoeven
cb93d568e1 powerpc: Correct dependency of KEXEC
commit 28794d34ec ("powerpc/kconfig: Kill
PPC_MULTIPLATFORM") broke KEXEC, by making it dependent on BOOK3S, while it
should be PPC_BOOK3S.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:19:00 +10:00
Michael Neuling
7e875e9dc8 powerpc: Disable VSX or current process in giveup_fpu/altivec
When we call giveup_fpu, we need to need to turn off VSX for the
current process.  If we don't, on return to userspace it may execute a
VSX instruction before the next FP instruction, and not have its
register state refreshed correctly from the thread_struct.  Ditto for
altivec.

This caused a bug where an unaligned lfs or stfs results in
fix_alignment calling giveup_fpu so it can use the FPRs (in order to
do a single <-> double conversion), and then returning to userspace
with FP off but VSX on.  Then if a VSX instruction is executed, before
another FP instruction, it will proceed without another exception and
hence have the incorrect register state for VSX registers 0-31.

   lfs unaligned   <- alignment exception turns FP off but leaves VSX on

   VSX instruction <- no exception since VSX on, hence we get the
                      wrong VSX register values for VSX registers 0-31,
                      which overlap the FPRs.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
4c6cf42843 powerpc/pseries: Enable relay in pseries_defconfig
Enable relay in pseries config, ppc64_defconfig had it enabled but pseries
did not.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
856cc2f0be powerpc/pseries: Fix ibm,client-architecture comment
We specify a 64MB RMO, but the comment says 128MB.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
4a9f9506e7 powerpc/pseries: Scan for all events in rtasd
Instead of checking for known events, pass in all 1s so we handle future
event types.  We were currently missing the IO event type.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
0559f0a761 powerpc/pseries: Add dispatch dispersion statistics
PHYP tells us how often a shared processor dispatch changed physical cpus.
This can highlight performance problems caused by the hypervisor.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
1f8737aab3 powerpc: Clean up some prom printouts
Make all messages consistent, some have spaces before the "...", some do not.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:59 +10:00
Anton Blanchard
4da727ae2a powerpc: Print progress of ibm,client-architecture method
The ibm,client-architecture method will often cause a reconfiguration reboot.
When this happens the last thing we see is:

	Hypertas detected, assuming LPAR !

Which doesn't explain what just happened.  Wrap the ibm,client-architecture
so it's clear what is going on:

	Calling ibm,client-architecture... done

In order to maintain the law of conservation of screen real estate, downgrade
two other messages to debug.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:58 +10:00
Huang Weiyi
85701e6ac1 powerpc: Remove duplicated #include's
Remove duplicated #include's in
  - arch/powerpc/include/asm/ps3fb.h
  - arch/powerpc/kernel/setup-common.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:58 +10:00
Paul Mackerras
ae6e59caef Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2009-04-07 12:54:08 +10:00
Linus Torvalds
4ef4327b30 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (120 commits)
  cx231xx: Convert to snd_card_create()
  V4L/DVB (11440): PWC: fix build error when CONFIG_INPUT=m
  V4L/DVB (11439): UVC: uvc_status_cleanup(): undefined reference to `input_unregister_device'
  V4L/DVB (11438): au0828: fix Kconfig dependance
  V4L/DVB (11437): pvrusb2: Drop client_register/unregister stubs
  V4L/DVB (11436): radio-mr800: convert to to v4l2_device
  V4L/DVB (11435): dsbr100 radio: convert to to v4l2_device
  V4L/DVB: zr364xx: remove unused #include <version.h>
  V4L/DVB: usbvision: remove unused #include <version.h>
  V4L/DVB (11427): gspca - m5602: Minor cleanups
  V4L/DVB (11426): gspca - m5602: Don't touch hflip/vflip register on Read/Modify/Write
  V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.
  V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust image on vflip.
  V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl cache ctrl.
  V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a define
  V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.
  V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driver
  V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.
  V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by default
  V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by default
  ...
2009-04-06 18:11:41 -07:00
Paulius Zaleckas
6acc81c394 V4L/DVB (11350): Add camera (CSI) driver for MX1
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs.

 create mode 100644 arch/arm/mach-mx1/ksym_mx1.c
 create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S
 create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h
 create mode 100644 drivers/media/video/mx1_camera.c

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Guennadi Liakhovetski
b71df97a3f V4L/DVB (11349): mx3-camera: adapt the clock definition and the driver to the new clock naming
With the i.MX31 transition to clkdev clock names have changed, but mistakenly
the "mx3-camera.0" has been registered with a non-NULL connection ID, which is
not necessary, since this is the only clock, used by the capture interface
driver. Fix the clock definition and the driver to use NULL as a connection ID.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Linus Torvalds
22ae77bc7a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (53 commits)
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] [NOR] Fixup for Numonyx M29W128 chips
  [MTD] mtdpart: Make ecc_stats more realistic.
  powerpc/85xx: TQM8548: Update DTS file for multi-chip support
  powerpc: NAND: FSL UPM: document new bindings
  [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays
  [MTD] [NAND] FSL-UPM: add multi chip support
  [MTD] [NOR] Add device parent info to physmap_of
  [MTD] [NAND] Add support for NAND on the Socrates board
  [MTD] [NAND] Add support for 4KiB pages.
  [MTD] sysfs support should not depend on CONFIG_PROC_FS
  [MTD] [NAND] Add parent info for CAFÉ controller
  [MTD] support driver model updates
  [MTD] driver model updates (part 2)
  [MTD] driver model updates
  [MTD] [NAND] move gen_nand's probe function to .devinit.text
  [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text
  [MTD] fix use after free in register_mtd_blktrans
  [MTD] [MAPS] Drop now unused sharpsl-flash map
  [MTD] ofpart: Check name property to determine partition nodes.
  ...

Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06 14:56:26 -07:00
Adrian Bunk
c47ae9adfd FRV: Fix compile breakage
This patch fixes the follwing build error caused by
commit 7ca43e7564
(mm: use debug_kmap_atomic):

  ...
    AS      arch/frv/mm/tlb-miss.o
  In file included from
  arch/frv/mm/tlb-miss.S:13:
  ...
  Assembler messages:
  include/asm-generic/ioctl.h:73:
  Error: unrecognized instruction `extern unsigned int __invalid_size_argument_for_IO...'
  ...

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 14:31:26 -07:00
Linus Torvalds
ffa009c366 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  drivers/pci/intr_remapping.c: include acpi.h
  intel-iommu: Fix oops in device_to_iommu() when devices not found.
  intel-iommu: Handle PCI domains appropriately.
  intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges.
  x2apic/intr-remap: decouple interrupt remapping from x2apic
  x86, dmar: check if it's initialized before disable queue invalidation
  intel-iommu: set compatibility format interrupt
  Intel IOMMU Suspend/Resume Support - Interrupt Remapping
  Intel IOMMU Suspend/Resume Support - Queued Invalidation
  Intel IOMMU Suspend/Resume Support - DMAR
  intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros
2009-04-06 14:26:05 -07:00
Wolfgang Grandegger
7995c7e94f powerpc/85xx: TQM8548: Update DTS file for multi-chip support
This patch adds multi-chip support for the Micron MT29F8G08FAB NAND
flash memory on the TQM8548 modules.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 07:19:18 -07:00
Wolfgang Grandegger
b6e0e8c077 [MTD] [NAND] FSL-UPM: add multi chip support
This patch adds support for multi-chip NAND devices to the FSL-UPM
driver. This requires support for multiple GPIOs for the RNB pins.
The NAND chips are selected through address lines defined by the
FDT property "fsl,upm-addr-line-cs-offsets".

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 07:17:09 -07:00
Scott Wood
65cc0fa3bd powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
Add aliases, and correct CS0 offset to match how u-boot
programs it (this was not a problem with cuImage because
the wrapper would reprogram the localbus to match the device
tree).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-06 09:09:46 -05:00
Kumar Gala
d91e4ea704 powerpc: Add support for CoreInt delivery of interrupts on MPIC
CoreInt provides a mechansim to deliver the IRQ vector directly
into the core on an interrupt (via the SPR EPR) rather than having
to go IACK on the PIC.  This is suppose to provide an improvment
in interrupt latency by reducing the time to get the IRQ vector.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-06 09:09:14 -05:00
Linus Torvalds
48f286a28f Merge branch 'for-next' of git://git.o-hand.com/linux-mfd
* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: fix da903x warning
  mfd: fix MAINTAINERS entry
  mfd: Use the value of the final spin when reading the AUXADC
  mfd: Storage class should be before const qualifier
  mfd: PASIC3: supply clock_rate to DS1WM via driver_data
  mfd: remove DS1WM clock handling
  mfd: remove unused PASIC3 bus_shift field
  pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data
  mfd: convert PASIC3 to use MFD core
  mfd: convert DS1WM to use MFD core
  mfd: Support active high IRQs on WM835x
  mfd: Use bulk read to fill WM8350 register cache
  mfd: remove duplicated #include from pcf50633
2009-04-05 11:38:37 -07:00
Linus Torvalds
ea431793f1 Merge branch 'for-linus' of git://repo.or.cz/cris-mirror
* 'for-linus' of git://repo.or.cz/cris-mirror:
  CRISv32: Remove extraneous space between -I and the path.
  cris: convert obsolete hw_interrupt_type to struct irq_chip
  BUG to BUG_ON changes
  cpumask: use mm_cpumask() wrapper: cris
  cpumask: Use accessors code.: cris
  cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.: cris
2009-04-05 11:36:31 -07:00
Linus Torvalds
32fb6c1756 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits)
  ACPI: processor: use .notify method instead of installing handler directly
  ACPI: button: use .notify method instead of installing handler directly
  ACPI: support acpi_device_ops .notify methods
  toshiba-acpi: remove MAINTAINERS entry
  ACPI: battery: asynchronous init
  acer-wmi: Update copyright notice & documentation
  acer-wmi: Cleanup the failure cleanup handling
  acer-wmi: Blacklist Acer Aspire One
  video: build fix
  thinkpad-acpi: rework brightness support
  thinkpad-acpi: enhanced debugging messages for the fan subdriver
  thinkpad-acpi: enhanced debugging messages for the hotkey subdriver
  thinkpad-acpi: enhanced debugging messages for rfkill subdrivers
  thinkpad-acpi: restrict access to some firmware LEDs
  thinkpad-acpi: remove HKEY disable functionality
  thinkpad-acpi: add new debug helpers and warn of deprecated atts
  thinkpad-acpi: add missing log levels
  thinkpad-acpi: cleanup debug helpers
  thinkpad-acpi: documentation cleanup
  thinkpad-acpi: drop ibm-acpi alias
  ...
2009-04-05 11:16:25 -07:00
Linus Torvalds
45e36c1666 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: sh7785lcr: Map whole PCI address space.
  sh: Fix up DSP context save/restore.
  sh: Fix up number of on-chip DMA channels on SH7091.
  sh: update defconfigs.
  sh: Kill off broken direct-mapped cache mode.
  sh: Wire up ARCH_HAS_DEFAULT_IDLE for cpuidle.
  sh: Add a command line option for disabling I/O trapping.
  sh: Select ARCH_HIBERNATION_POSSIBLE.
  sh: migor: Fix up CEU use flags.
  input: migor_ts: add wakeup support
  rtc: rtc-sh: use set_irq_wake()
  input: sh_keysc: use enable/disable_irq_wake()
  sh: intc: set_irq_wake() support
  sh: intc: install enable, disable and shutdown callbacks
  clocksource: sh_cmt: use remove_irq() and remove clockevent workaround
  sh: ap325 and Migo-R use new sh_mobile_ceu_info flags
  sh: Fix up -Wformat-security whining.
  sh: ap325rxa: Add ov772x support, again.
  sh: Sanitize asm/mmu.h for assembly use.
  sh: Tidy up sh7786 pinmux table.
  ...
2009-04-05 11:15:54 -07:00
Linus Torvalds
87fc94d54b Merge branch 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* 'avr32-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: add hardware handshake support to atmel_serial
  avr32: add RTS/CTS/CLK pin selection for the USARTs
  Add RTC support for Merisc boards
  avr32: at32ap700x: setup DMA for AC97C in the machine code
  avr32: at32ap700x: setup DMA for ABDAC in the machine code
  Add Merisc board support
  avr32: use gpio_is_valid() to check USBA vbus_pin I/O line
  atmel-usba-udc: use gpio_is_valid() to check vbus_pin I/O line
  avr32: fix timing LCD parameters for EVKLCD10X boards
  avr32: use GPIO line PB15 on EVKLCD10x boards for backlight
  avr32: configure MCI detect and write protect pins for EVKLCD10x boards
  avr32: set pin mask to alternative 18 bpp for EVKLCD10x boards
  avr32: add pin mask for 18-bit color on the LCD controller
  avr32: fix 15-bit LCDC pin mask to use MSB lines
2009-04-05 11:15:28 -07:00
Linus Torvalds
714f83d5d9 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c
2009-04-05 11:04:19 -07:00
Linus Torvalds
90975ef712 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...
2009-04-05 10:33:07 -07:00
Linus Torvalds
cab4e4c43f Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param:
  module: use strstarts()
  strstarts: helper function for !strncmp(str, prefix, strlen(prefix))
  arm: allow usage of string functions in linux/string.h
  module: don't use stop_machine on module load
  module: create a request_module_nowait()
  module: include other structures in module version check
  module: remove the SHF_ALLOC flag on the __versions section.
  module: clarify the force-loading taint message.
  module: Export symbols needed for Ksplice
  Ksplice: Add functions for walking kallsyms symbols
  module: remove module_text_address()
  module: __module_address
  module: Make find_symbol return a struct kernel_symbol
  kernel/module.c: fix an unused goto label
  param: fix charp parameters set via sysfs

Fix trivial conflicts in kernel/extable.c manually.
2009-04-05 10:30:21 -07:00
Len Brown
478c6a43fc Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/cpu/cpufreq/longhaul.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:14:15 -04:00
Len Brown
8a3f257c70 Merge branch 'misc' into release 2009-04-05 01:52:07 -04:00
Len Brown
33526a5360 Merge branch 'x2apic' into release 2009-04-05 01:51:51 -04:00
Philipp Zabel
0ef2067d0f pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data
The PASIC3 driver now calculates its register spacing from the resource
size.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-04-05 00:32:21 +02:00
Takashi Yoshii
68b42d1b54 sh: sh7785lcr: Map whole PCI address space.
PCI still doesn't work on sh7785lcr 29bit 256M map mode.

On SH7785, PCI -> SHwy address translation is not base+offset but
somewhat like base|offset (See HW Manual (rej09b0261) Fig. 13.11).
So, you can't export CS2,3,4,5 by 256M at CS2 (results CS0,1,2,3
exported, I guess).  There are two candidates.

a) 128M@CS2 + 128M@CS4
b) 512M@CS0

Attached patch is B. It maps 512M Byte at 0 independently of memory
size. It results CS0 to CS6 and perhaps some more being accessible
from PCI.

Tested on
7785lcr 29bit 128M map
7785lcr 29bit 256M map
(NOT tested on 32bit)

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-04 11:50:52 -04:00
Michael Trimarchi
01ab10393c sh: Fix up DSP context save/restore.
There were a number of issues with the DSP context save/restore code,
mostly left-over relics from when it was introduced on SH3-DSP with
little follow-up testing, resulting in things like task_pt_dspregs()
referencing incorrect state on the stack.

This follows the MIPS convention of tracking the DSP state in the
thread_struct and handling the state save/restore in switch_to() and
finish_arch_switch() respectively. The regset interface is also updated,
which allows us to finally be rid of task_pt_dspregs() and the special
cased task_pt_regs().

Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-04 11:48:11 -04:00
Paul Mundt
a27873cd23 sh: Fix up number of on-chip DMA channels on SH7091.
This accidentally regressed when the multi-IRQ changes went in,
switching SH7091 from 4 to 6 channels. Add SH7091 back in to the
4-channel dependency list.

Reported-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-04 11:40:22 -04:00
Han, Weidong
d0b03bd1c6 x2apic/intr-remap: decouple interrupt remapping from x2apic
interrupt remapping must be enabled before enabling x2apic, but
interrupt remapping doesn't depend on x2apic, it can be used
separately. Enable interrupt remapping in init_dmars even x2apic
is not supported.

[dwmw2: Update Kconfig accordingly, fix build with INTR_REMAP && !X2APIC]

Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04 10:42:28 +01:00
Linus Torvalds
6bb597507f Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mtrr: remove debug message
  x86: disable stack-protector for __restore_processor_state()
  x86: fix is_io_mapping_possible() build warning on i386 allnoconfig
  x86, setup: compile with -DDISABLE_BRANCH_PROFILING
  x86/dma: unify definition of pci_unmap_addr* and pci_unmap_len macros
  x86, mm: fix misuse of debug_kmap_atomic
  x86: remove duplicated code with pcpu_need_numa()
  x86,percpu: fix inverted NUMA test in setup_pcpu_remap()
  x86: signal: check sas_ss_size instead of sas_ss_flags()
2009-04-03 17:36:21 -07:00