Impact: avoid false-positive WARN_ON()
Andi Kleen reported:
> When running x86info on a 2.6.27-git8 system I get
>
> resource map sanity check conflict: 0x9e000 0x9efff 0x10000 0x9e7ff System RAM
> ------------[ cut here ]------------
> WARNING: at /home/lsrc/linux/arch/x86/mm/ioremap.c:226 __ioremap_caller+0xf2/0x2d6()
> ...
Some of the pages below the 1MB ISA addresses will be shared typically by both
BIOS and system usable RAM. For example:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
x86info reads the low physical address using /dev/mem, which internally
uses ioremap() for accessing non RAM pages. ioremap() of such low
pages conflicts with multiple resource entities leading to the
above warning.
Change the iomem_map_sanity_check() to allow mapping a page spanning multiple
resource entities (minimum granularity that one can map is a page anyhow).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: corrects a bug which made the non-dyn function tracer not functional
With latest git, the non-dynamic function tracer didn't get any trace.
The problem was the fact that ftrace_enabled wasn't initialized to 1
because ftrace hasn't any init function when DYNAMIC_FTRACE is disabled.
So when a tracer tries to register an ftrace_ops struct,
__register_ftrace_function failed to set the hook.
This patch corrects it by setting an init function to initialize
ftrace during the boot.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
ftrace: fix current_tracer error return
tracing: fix a build error on alpha
ftrace: use a real variable for ftrace_nop in x86
tracing/ftrace: make boot tracer select the sched_switch tracer
tracepoint: check if the probe has been registered
asm-generic: define DIE_OOPS in asm-generic
trace: fix printk warning for u64
ftrace: warning in kernel/trace/ftrace.c
ftrace: fix build failure
ftrace, powerpc, sparc64, x86: remove notrace from arch ftrace file
ftrace: remove ftrace hash
ftrace: remove mcount set
ftrace: remove daemon
ftrace: disable dynamic ftrace for all archs that use daemon
ftrace: add ftrace warn on to disable ftrace
ftrace: only have ftrace_kill atomic
ftrace: use probe_kernel
ftrace: comment arch ftrace code
ftrace: return error on failed modified text.
ftrace: dynamic ftrace process only text section
...
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: fix irqs on/off ip tracing
lockdep: minor fix for debug_show_all_locks()
x86: restore the old swiotlb alloc_coherent behavior
x86: use GFP_DMA for 24bit coherent_dma_mask
swiotlb: remove panic for alloc_coherent failure
xen: compilation fix of drivers/xen/events.c on IA64
xen: portability clean up and some minor clean up for xencomm.c
xen: don't reload cr3 on suspend
kernel/resource: fix reserve_region_with_split() section mismatch
printk: remove unused code from kernel/printk.c
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: fix documentation reference for sched_min_granularity_ns
sched: virtual time buddy preemption
sched: re-instate vruntime based wakeup preemption
sched: weaken sync hint
sched: more accurate min_vruntime accounting
sched: fix a find_busiest_group buglet
sched: add CONFIG_SMP consistency
The commit (in linux-tip) c2931e05ec
( ftrace: return an error when setting a nonexistent tracer )
added useful code that would error when a bad tracer was written into
the current_tracer file.
But this had a bug if the amount written was more than the amount read by
that code. The first iteration would set the tracer correctly, but since
it did not consume the rest of what was written (usually whitespace), the
userspace utility would continue to write what was not consumed. This
second iteration would fail to find a tracer and return -EINVAL. Funny
thing is that the tracer would have already been set.
This patch just consumes all the data that is written to the file.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix lockdep lock-api-caller output when irqsoff tracing is enabled
81d68a96 "ftrace: trace irq disabled critical timings" added wrappers around
trace_hardirqs_on/off_caller. However these functions use
__builtin_return_address(0) to figure out which function actually disabled
or enabled irqs. The result is that we save the ips of trace_hardirqs_on/off
instead of the real caller. Not very helpful.
However since the patch from Steven the ip already gets passed. So use that
and get rid of __builtin_return_address(0) in these two functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we failed to get tasklist_lock eventually (count equals 0),
we should only print " ignoring it.\n", and not print
" locked it.\n" needlessly.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix on Alpha
When tracing is enabled, some arch have included <linux/irqflags.h>
on their <asm/system.h> but others like alpha or m68k don't.
Build error on alpha:
kernel/trace/trace.c: In function 'tracing_cpumask_write':
kernel/trace/trace.c:2145: error: implicit declaration of function 'raw_local_irq_disable'
kernel/trace/trace.c:2162: error: implicit declaration of function 'raw_local_irq_enable'
Tested on Alpha through a cross-compiler (should correct a similar issue on m68k).
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
If the boot tracer is selected but not the sched_switch,
there will be a build failure:
kernel/built-in.o: In function `boot_trace_init':
trace_boot.c:(.text+0x5ee38): undefined reference to `sched_switch_trace'
kernel/built-in.o: In function `disable_boot_trace':
(.text+0x5eee1): undefined reference to `tracing_stop_cmdline_record'
kernel/built-in.o: In function `enable_boot_trace':
(.text+0x5ef11): undefined reference to `tracing_start_cmdline_record'
This patch fixes it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix kernel crash that can trigger during tracing
If we try to remove a probe that has not been already registered,
the tracepoint_entry_remove_probe() function will dereference a NULL
pointer.
Check the probe before removing it to avoid crashes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A powerpc ppc64_defconfig build produces these warnings:
kernel/trace/ring_buffer.c: In function 'rb_add_time_stamp':
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'u64'
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64'
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64'
Just cast the u64s to unsigned long long like we do everywhere else.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
/scratch/sfr/next/kernel/cgroup.c: In function 'cgroup_tasks_start':
/scratch/sfr/next/kernel/cgroup.c:2107: warning: unused variable 'i'
Introduced in commit cc31edceee "cgroups:
convert tasks file to use a seq_file with shared pid array".
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit a802dd0eb5 by moving
the call to init_workqueues() back where it belongs - after SMP has been
initialized.
It also moves stop_machine_init() - which needs workqueues - to a later
phase using a core_initcall() instead of early_initcall(). That should
satisfy all ordering requirements, and was apparently the reason why
init_workqueues() was moved to be too early.
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
this warning:
kernel/trace/ftrace.c:189: warning: ‘frozen_record_count’ defined but not used
triggers because frozen_record_count is only used in the KCONFIG_MARKERS
case. Move the variable it there.
Alas, this frozen-record facility seems to have little use. The
frozen_record_count variable is not used by anything, nor the flags.
So this section might need a bit of dead-code-removal care as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we moved wakeup preemption back to virtual time, it makes sense to move
the buddy stuff back as well. The purpose of the buddy scheduling is to allow
a quickly scheduling pair of tasks to run away from the group as far as a
regular busy task would be allowed under wakeup preemption.
This has the advantage that the pair can ping-pong for a while, enjoying
cache-hotness. Without buddy scheduling other tasks would interleave destroying
the cache.
Also, it saves a word in cfs_rq.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The advantage is that vruntime based wakeup preemption has a better
conceptual model. Here wakeup_gran = 0 means: preempt when 'fair'.
Therefore wakeup_gran is the granularity of unfairness we allow in order
to make progress.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mysql+oltp and pgsql+oltp peaks are still shifted right. The below puts
the peaks back to 1 client/server pair per core.
Use the avg_overlap information to weaken the sync hint.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike noticed the current min_vruntime tracking can go wrong and skip the
current task. If the only remaining task in the tree is a nice 19 task
with huge vruntime, new tasks will be inserted too far to the right too,
causing some interactibity issues.
min_vruntime can only change due to the leftmost entry disappearing
(dequeue_entity()), or by the leftmost entry being incremented past the
next entry, which elects a new leftmost (__update_curr())
Due to the current entry not being part of the actual tree, we have to
compare the leftmost tree entry with the current entry, and take the
leftmost of these two.
So create a update_min_vruntime() function that takes computes the
leftmost vruntime in the system (either tree of current) and increases
the cfs_rq->min_vruntime if the computed value is larger than the
previously found min_vruntime. And call this from the two sites we've
identified that can change min_vruntime.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In one of the group load balancer patches:
commit 408ed066b1
Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Fri Jun 27 13:41:28 2008 +0200
Subject: sched: hierarchical load vs find_busiest_group
The following change:
- if (max_load - this_load + SCHED_LOAD_SCALE_FUZZ >=
+ if (max_load - this_load + 2*busiest_load_per_task >=
busiest_load_per_task * imbn) {
made the condition always true, because imbn is [1,2].
Therefore, remove the 2*, and give the it a fair chance.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, small kernel text size reduction, no functionality changed
reserve_region_with_split() calls in to __reserve_region_with_split(),
which is an __init function. The only caller of reserve_region_with_split()
is an __init function, so make it __init too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move free_module_param_attrs() into the CONFIG_MODULES section, since
it's only used inside there. Thus avoiding the warning
kernel/params.c:514: warning: 'free_module_param_attrs' defined but not used
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
hrtimers: add missing docbook comments to struct hrtimer
hrtimers: simplify hrtimer_peek_ahead_timers()
hrtimers: fix docbook comments
DECLARE_PER_CPU needs linux/percpu.h
hrtimers: fix typo
rangetimers: fix the bug reported by Ingo for real
rangetimer: fix BUG_ON reported by Ingo
rangetimer: fix x86 build failure for the !HRTIMERS case
select: fix alpha OSF wrapper
select: fix alpha OSF wrapper
hrtimer: peek at the timer queue just before going idle
hrtimer: make the futex() system call use the per process slack value
hrtimer: make the nanosleep() syscall use the per process slack
hrtimer: fix signed/unsigned bug in slack estimator
hrtimer: show the timer ranges in /proc/timer_list
hrtimer: incorporate feedback from Peter Zijlstra
hrtimer: add a hrtimer_start_range() function
hrtimer: another build fix
hrtimer: fix build bug found by Ingo
hrtimer: make select() and poll() use the hrtimer range feature
...
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
[PATCH] kill the rest of struct file propagation in block ioctls
[PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
[PATCH] get rid of blkdev_locked_ioctl()
[PATCH] get rid of blkdev_driver_ioctl()
[PATCH] sanitize blkdev_get() and friends
[PATCH] remember mode of reiserfs journal
[PATCH] propagate mode through swsusp_close()
[PATCH] propagate mode through open_bdev_excl/close_bdev_excl
[PATCH] pass fmode_t to blkdev_put()
[PATCH] kill the unused bsize on the send side of /dev/loop
[PATCH] trim file propagation in block/compat_ioctl.c
[PATCH] end of methods switch: remove the old ones
[PATCH] switch sr
[PATCH] switch sd
[PATCH] switch ide-scsi
[PATCH] switch tape_block
[PATCH] switch dcssblk
[PATCH] switch dasd
[PATCH] switch mtd_blkdevs
[PATCH] switch mmc
...
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
stop_machine: fix error code handling on multiple cpus
stop_machine: use workqueues instead of kernel threads
workqueue: introduce create_rt_workqueue
Call init_workqueues before pre smp initcalls.
Make panic= and panic_on_oops into core_params
Make initcall_debug a core_param
core_param() for genuinely core kernel parameters
param: Fix duplicate module prefixes
module: check kernel param length at compile time, not runtime
Remove stop_machine during module load v2
module: simplify load_module.
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: disable the hrtick for now
sched: revert back to per-rq vruntime
sched: fair scheduler should not resched rt tasks
sched: optimize group load balancer
sched: minor fast-path overhead reduction
sched: fix the wrong mask_len, cleanup
sched: kill unused scheduler decl.
sched: fix the wrong mask_len
sched: only update rq->clock while holding rq->lock
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: NULL struct irq_desc's member 'name' in dynamic_irq_cleanup()
genirq: fix off by one and coding style
genirq: fix set_irq_type() when recording trigger type
fix:
kernel/trace/ftrace.c: In function 'ftrace_release':
kernel/trace/ftrace.c:271: error: implicit declaration of function 'ftrace_release_hash'
release_hash is not needed without dftraced.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace hash was used by the ftrace_daemon code. The record ip function
would place the calling address (ip) into the hash. The daemon would later
read the hash and modify that code.
The hash complicates the code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace daemon is complex and error prone. This patch strips it out
of the code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add ftrace warn on to disable ftrace as well as report a warning.
[ Thanks to Andrew Morton for suggesting using the WARN_ON return value ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When an anomaly is detected, we need a way to completely disable
ftrace. Right now we have two functions: ftrace_kill and ftrace_kill_atomic.
The ftrace_kill tries to do it in a "nice" way by converting everything
back to a nop.
The "nice" way is dangerous itself, so this patch removes it and only
has the "atomic" version, which is all that is needed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Have the ftrace_modify_code return error values:
-EFAULT on error of reading the address
-EINVAL if what is read does not match what it expected
-EPERM if the write fails to update after a successful match.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The pages of a buffer was originally pointing to the page struct, it
now points to the page address. The freeing of the page still uses
the page frame free "__free_page" instead of the correct free_page to
the address.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
a patch from Henrik Austad did this:
>> Do not declare select_task_rq as part of sched_class when CONFIG_SMP is
>> not set.
Peter observed:
> While a proper cleanup, could you do it by re-arranging the methods so
> as to not create an additional ifdef?
Do not declare select_task_rq and some other methods as part of sched_class
when CONFIG_SMP is not set.
Also gather those methods to avoid CONFIG_SMP mess.
Idea-by: Henrik Austad <henrik.austad@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We seem to have plenty tracers, lets create a menu and not clutter
the already cluttered debug menu more.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This variable is only used in the source file, so make it static.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using |= for updating a value which might be updated on several cpus
concurrently will not always work since we need to make sure that the
update happens atomically.
To fix this just use a write if the called function returns an error
code on a cpu. We end up writing the error code of an arbitrary cpu
if multiple ones fail but that should be sufficient.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Convert stop_machine to a workqueue based approach. Instead of using kernel
threads for stop_machine we now use a an rt workqueue to synchronize all
cpus.
This has the advantage that all needed per cpu threads are already created
when stop_machine gets called. And therefore a call to stop_machine won't
fail anymore. This is needed for s390 which needs a mechanism to synchronize
all cpus without allocating any memory.
As Rusty pointed out free_module() needs a non-failing stop_machine interface
as well.
As a side effect the stop_machine code gets simplified.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
create_rt_workqueue will create a real time prioritized workqueue.
This is needed for the conversion of stop_machine to a workqueue based
implementation.
This patch adds yet another parameter to __create_workqueue_key to tell
it that we want an rt workqueue.
However it looks like we rather should have something like "int type"
instead of singlethread, freezable and rt.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
This allows them to be examined and set after boot, plus means they
actually give errors if they are misused (eg. panic=yes).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are a lot of one-liner uses of __setup() in the kernel: they're
cumbersome and not queryable (definitely not settable) via /sys. Yet
it's ugly to simplify them to module_param(), because by default that
inserts a prefix of the module name (usually filename).
So, introduce a "core_param". The parameter gets no prefix, but
appears in /sys/module/kernel/parameters/ (if non-zero perms arg). I
thought about using the name "core", but that's more common than
"kernel". And if you create a module called "kernel", you will die
a horrible death.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of insisting each new module_param sysfs entry is unique,
handle the case where it already exists (for builtin modules).
The current code assumes that all identical prefixes are together in
the section: true for normal uses, but not necessarily so if someone
overrides MODULE_PARAM_PREFIX. More importantly, it's not true with
the new "core_param()" code which uses "kernel" as a prefix.
This simplifies the caller for the builtin case, at a slight loss of
efficiency (we do the lookup every time to see if the directory
exists).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
The kparam code tries to handle over-length parameter prefixes at
runtime. Not only would I bet this has never been tested, it's not
clear that truncating names is a good idea either.
So let's check at compile time. We need to move the #define to
moduleparam.h to do this, though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Remove stop_machine during module load v2
module loading currently does a stop_machine on each module load to insert
the module into the global module lists. Especially on larger systems this
can be quite expensive.
It does that to handle concurrent lock lessmodule list readers
like kallsyms.
I don't think stop_machine() is actually needed to insert something
into a list though. There are no concurrent writers because the
module mutex is taken. And the RCU list functions know how to insert
a node into a list with the right memory ordering so that concurrent
readers don't go off into the wood.
So remove the stop_machine for the module list insert and just
do a list_add_rcu() instead.
Module removal will still do a stop_machine of course, it needs
that for other reasons.
v2: Revised readers based on Paul's comments. All readers that only
rely on disabled preemption need to be changed to list_for_each_rcu().
Done that. The others are ok because they have the modules mutex.
Also added a possible missing preempt disable for print_modules().
[cc Paul McKenney for review. It's not RCU, but quite similar.]
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus' recent catch of stack overflow in load_module lead me to look
at the code. A couple of helpers to get a section address and get
objects from a section can help clean things up a little.
(And in case you're wondering, the stack size also dropped from 328 to
284 bytes).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
commit fb02fbc14d (NOHZ: restart tick
device from irq_enter())
solves the problem of stale jiffies when long running softirqs happen
in a long idle sleep period, but it has a major thinko in it:
When the interrupt which came in _is_ the timer interrupt which should
expire ts->sched_timer then we cancel and rearm the timer _before_ it
gets expired in hrtimer_interrupt() to the next period. That means the
call back function is not called. This game can go on for ever :(
Prevent this by making sure to only rearm the timer when the expiry
time is more than one tick_period away. Otherwise keep it running as
it is either already expired or will expiry at the right point to
update jiffies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Venkatesch Pallipadi <venkatesh.pallipadi@intel.com>
current rcu_barrier_bh() is like this:
void rcu_barrier_bh(void)
{
BUG_ON(in_interrupt());
/* Take cpucontrol mutex to protect against CPU hotplug */
mutex_lock(&rcu_barrier_mutex);
init_completion(&rcu_barrier_completion);
atomic_set(&rcu_barrier_cpu_count, 0);
/*
* The queueing of callbacks in all CPUs must be atomic with
* respect to RCU, otherwise one CPU may queue a callback,
* wait for a grace period, decrement barrier count and call
* complete(), while other CPUs have not yet queued anything.
* So, we need to make sure that grace periods cannot complete
* until all the callbacks are queued.
*/
rcu_read_lock();
on_each_cpu(rcu_barrier_func, (void *)RCU_BARRIER_BH, 1);
rcu_read_unlock();
wait_for_completion(&rcu_barrier_completion);
mutex_unlock(&rcu_barrier_mutex);
}
The inconsistency of the code and the comments show a bug here.
rcu_read_lock() cannot make sure that "grace periods for RCU_BH
cannot complete until all the callbacks are queued".
it only make sure that race periods for RCU cannot complete
until all the callbacks are queued.
so we must use rcu_read_lock_bh() for rcu_barrier_bh().
like this:
void rcu_barrier_bh(void)
{
......
rcu_read_lock_bh();
on_each_cpu(rcu_barrier_func, (void *)RCU_BARRIER_BH, 1);
rcu_read_unlock_bh();
......
}
and also rcu_barrier() rcu_barrier_sched() are implemented like this.
it will bring a lot of duplicate code. My patch uses another way to
fix this bug, please see the comment of my patch.
Thank Paul E. McKenney for he rewrote the comment.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the member 'name' of the irq_desc structure happens to point to a
character string that is resident within a kernel module, problems ensue
if that module is rmmod'd (at which time dynamic_irq_cleanup() is called)
and then later show_interrupts() is called by someone.
It is also not a good thing if the character string resided in kmalloc'd
space that has been kfree'd (after having called dynamic_irq_cleanup()).
dynamic_irq_cleanup() fails to NULL the 'name' member and
show_interrupts() references it on a few architectures (like h8300, sh and
x86).
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* get rid of fake struct file/struct dentry in __blkdev_get()
* merge __blkdev_get() and do_open()
* get rid of flags argument of blkdev_get()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Impact: fix boot hang on a G5
In set_irq_type() we want to pass the type rather than the current
interrupt state.
Signed-off-by: Chris Friesen <cfriesen@nortel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This fixes
kernel/kexec.c: In function 'crash_save_vmcoreinfo_init':
kernel/kexec.c:1374: error: 'vmlist' undeclared (first use in this function)
kernel/kexec.c:1374: error: (Each undeclared identifier is reported only once
kernel/kexec.c:1374: error: for each function it appears in.)
kernel/kexec.c:1410: error: invalid use of undefined type 'struct vm_struct'
make[1]: *** [kernel/kexec.o] Error 1
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu
and x86/uv.
The sparseirq branch is just preliminary groundwork: no sparse IRQs are
actually implemented by this tree anymore - just the new APIs are added
while keeping the old way intact as well (the new APIs map 1:1 to
irq_desc[]). The 'real' sparse IRQ support will then be a relatively
small patch ontop of this - with a v2.6.29 merge target.
* 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits)
genirq: improve include files
intr_remapping: fix typo
io_apic: make irq_mis_count available on 64-bit too
genirq: fix name space collisions of nr_irqs in arch/*
genirq: fix name space collision of nr_irqs in autoprobe.c
genirq: use iterators for irq_desc loops
proc: fixup irq iterator
genirq: add reverse iterator for irq_desc
x86: move ack_bad_irq() to irq.c
x86: unify show_interrupts() and proc helpers
x86: cleanup show_interrupts
genirq: cleanup the sparseirq modifications
genirq: remove artifacts from sparseirq removal
genirq: revert dynarray
genirq: remove irq_to_desc_alloc
genirq: remove sparse irq code
genirq: use inline function for irq_to_desc
genirq: consolidate nr_irqs and for_each_irq_desc()
x86: remove sparse irq from Kconfig
genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n
...
* 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
fix documentation of sysrq-q really
Fix documentation of sysrq-q
timer_list: add base address to clock base
timer_list: print cpu number of clockevents device
timer_list: print real timer address
NOHZ: restart tick device from irq_enter()
NOHZ: split tick_nohz_restart_sched_tick()
NOHZ: unify the nohz function calls in irq_enter()
timers: fix itimer/many thread hang, fix
timers: fix itimer/many thread hang, v3
ntp: improve adjtimex frequency rounding
timekeeping: fix rounding problem during clock update
ntp: let update_persistent_clock() sleep
hrtimer: reorder struct hrtimer to save 8 bytes on 64bit builds
posix-timers: lock_timer: make it readable
posix-timers: lock_timer: kill the bogus ->it_id check
posix-timers: kill ->it_sigev_signo and ->it_sigev_value
posix-timers: sys_timer_create: cleanup the error handling
posix-timers: move the initialization of timer->sigq from send to create path
posix-timers: sys_timer_create: simplify and s/tasklist/rcu/
...
Fix trivial conflicts due to sysrq-q description clahes in
Documentation/sysrq.txt and drivers/char/sysrq.c
A consolidated implementation will provide this generically through
asm/byteorder, remove direct includes to avoid breakage when the
changeover to the new implementation occurs.
This hunk was lost from commit 1d8cca44b6
("byteorder: provide swabb.h generically in asm/byteorder.h")
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The stack trace API does not record if the stack is not on the current
task's stack. That is, if the stack is the interrupt stack or NMI stack,
the output does not show. Also, the size of those stacks are not
consistent with the size of the thread stack, this makes the calculation
of the stack size usually bogus.
This all confuses the stack tracer. I unfortunately do not have time to
fix all these problems, but this patch does record the worst stack when
the stack pointer is on the tasks stack (instead of bogus numbers).
The patch simply returns if the stack pointer is not on the task's stack.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To avoid further confusion between the ftrace infrastructure and the
function tracer. This patch renames the "ftrace" function tracer
to "function".
Now in available_tracers, instead of "ftrace" there will be "function".
This makes more sense, since people will not know exactly what the
"ftrace" tracer does.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A lot of tracers have HAVE_FTRACE as a dependent config where it
really should not. The HAVE_FTRACE is a misnomer (soon to be fixed)
and describes if the architecture has the function tracer (mcount)
implemented. The ftrace infrastructure is implemented in all archs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The x86 architecture uses a static recording of mcount caller locations
and is not affected by this patch.
For architectures still using the dynamic ftrace daemon, this patch is
critical. It removes the race between the recording of a function that
calls mcount, the unloading of a module, and the ftrace daemon updating
the call sites.
This patch adds the releasing of the hash functions that the daemon uses
to update the mcount call sites. When a module is unloaded, not only
are the replaced call site table update, but now so is the hash recorded
functions that the ftrace daemon will use.
Again, architectures that implement MCOUNT_RECORD are not affected by
this (which currently only x86 has).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A consolidated implementation will provide this generically through
asm/byteorder, remove direct includes to avoid breakage when the
changeover to the new implementation occurs.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the symbols 'vmlist' and offset 'vm_struct.addr' to the vmcoreinfo[1]
data for i386 vmalloc translation.
makedumpfile[2] needs VMALLOC_START value for distinguishing a vmalloc
address or not, because it should choose suitable translation method. If
applying this patch, makedumpfile will be able to take VMALLOC_START value
from 'vmlist.addr'.
vmcoreinfo[1]:
The vmcoreinfo data has the minimum debugging information only for dump
filtering. makedumpfile[2] uses it to distinguish unnecessary pages and
creates a small dumpfile.
makedumpfile[2]:
dump filtering command
https://sourceforge.net/projects/makedumpfile/
Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that wait_task_inactive(task, state) checks task->state == state,
we can simplify the code and make this debugging check more robust.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ptrace_untrace() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) seq_file excepts that m->count == m->size when it's buf is full,
so current code will causes bugs when buf is overflow.
2) There is not too good that cpuset accesses struct seq_file's
fields directly.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the use of int cpus_nonempty variable from 'update_flag' function.
Signed-off-by: Md.Rakib H. Mullick <rakib.mullick@gmail.com>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than pre-generating the entire text for the "tasks" file each
time the file is opened, we instead just generate/update the array of
process ids and use a seq_file to report these to userspace. All open
file handles on the same "tasks" file can share a pid array, which may
be updated any time that no thread is actively reading the array. By
sharing the array, the potential for userspace to DoS the system by
opening many handles on the same "tasks" file is removed.
[Based on a patch by Lai Jiangshan, extended to use seq_file]
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
put_css_set_taskexit may be called when find_css_set is called on other
cpu. And the race will occur:
put_css_set_taskexit side find_css_set side
|
atomic_dec_and_test(&kref->refcount) |
/* kref->refcount = 0 */ |
....................................................................
| read_lock(&css_set_lock)
| find_existing_css_set
| get_css_set
| read_unlock(&css_set_lock);
....................................................................
__release_css_set |
....................................................................
| /* use a released css_set */
|
[put_css_set is the same. But in the current code, all put_css_set are
put into cgroup mutex critical region as the same as find_css_set.]
[akpm@linux-foundation.org: repair comments]
[menage@google.com: eliminate race in css_set refcounting]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These comments are useless, remove them.
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
check_if_frozen() sounds like it should return something when in fact it's
just updating the freezer state.
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename cgroup freezer states to be less generic to avoid any name
collisions while also better describing what each state is.
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't let frozen tasks or cgroups change. This means frozen tasks can't
leave their current cgroup for another cgroup. It also means that tasks
cannot be added to or removed from a cgroup in the FROZEN state. We
enforce these rules by checking for frozen tasks and cgroups in the
can_attach() function.
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a system is resumed after a suspend, it will also unfreeze frozen
cgroups.
This patchs modifies the resume sequence to skip the tasks which are part
of a frozen control group.
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch implements a new freezer subsystem in the control groups
framework. It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.
The freezer subsystem in the container filesystem defines a file named
freezer.state. Writing "FROZEN" to the state file will freeze all tasks
in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup. Reading will return the current state.
* Examples of usage :
# mkdir /containers/freezer
# mount -t cgroup -ofreezer freezer /containers
# mkdir /containers/0
# echo $some_pid > /containers/0/tasks
to get status of the freezer subsystem :
# cat /containers/0/freezer.state
RUNNING
to freeze all tasks in the container :
# echo FROZEN > /containers/0/freezer.state
# cat /containers/0/freezer.state
FREEZING
# cat /containers/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
# echo RUNNING > /containers/0/freezer.state
# cat /containers/0/freezer.state
RUNNING
This is the basic mechanism which should do the right thing for user space
task in a simple scenario.
It's important to note that freezing can be incomplete. In that case we
return EBUSY. This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time. After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read. The state will remain
"FREEZING" until one of these things happens:
1) Userspace cancels the freezing operation by writing "RUNNING" to
the freezer.state file
2) Userspace retries the freezing operation by writing "FROZEN" to
the freezer.state file (writing "FREEZING" is not legal
and returns EIO)
3) The tasks that blocked the cgroup from entering the "FROZEN"
state disappear from the cgroup's set of tasks.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the TIF_FREEZE flag is available in all architectures, extract
the refrigerator() and freeze_task() from kernel/power/process.c and make
it available to all.
The refrigerator() can now be used in a control group subsystem
implementing a control group freezer.
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Matt Helsley <matthltc@us.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds a function to scan individual or all zones' unevictable
lists and move any pages that have become evictable onto the respective
zone's inactive list, where shrink_inactive_list() will deal with them.
Adds sysctl to scan all nodes, and per node attributes to individual
nodes' zones.
Kosaki: If evictable page found in unevictable lru when write
/proc/sys/vm/scan_unevictable_pages, print filename and file offset of
these pages.
[akpm@linux-foundation.org: fix one CONFIG_MMU=n build error]
[kosaki.motohiro@jp.fujitsu.com: adapt vmscan-unevictable-lru-scan-sysctl.patch to new sysfs API]
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Miller reported that hrtick update overhead has tripled the
wakeup overhead on Sparc64.
That is too much - disable the HRTICK feature for now by default,
until a faster implementation is found.
Reported-by: David Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Vatsa rightly points out that having the runqueue weight in the vruntime
calculations can cause unfairness in the face of task joins/leaves.
Suppose: dv = dt * rw / w
Then take 10 tasks t_n, each of similar weight. If the first will run 1
then its vruntime will increase by 10. Now, if the next 8 tasks leave after
having run their 1, then the last task will get a vruntime increase of 2
after having run 1.
Which will leave us with 2 tasks of equal weight and equal runtime, of which
one will not be scheduled for 8/2=4 units of time.
Ergo, we cannot do that and must use: dv = dt / w.
This means we cannot have a global vruntime based on effective priority, but
must instead go back to the vruntime per rq model we started out with.
This patch was lightly tested by doing starting while loops on each nice level
and observing their execution time, and a simple group scenario of 1:2:3 pinned
to a single cpu.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With use of ftrace Steven noticed that some RT tasks got rescheduled due
to sched_fair interaction.
What happens is that we reprogram the hrtick from enqueue/dequeue_fair_task()
because that can change nr_running, and thus a current tasks ideal runtime.
However, its possible the current task isn't a fair_sched_class task, and thus
doesn't have a hrtick set to change.
Fix this by wrapping those hrtick_start_fair() calls in a hrtick_update()
function, which will check for the right conditions.
Reported-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I noticed that tg_shares_up() unconditionally takes rq-locks for all cpus
in the sched_domain. This hurts.
We need the rq-locks whenever we change the weight of the per-cpu group sched
entities. To allevate this a little, only change the weight when the new
weight is at least shares_thresh away from the old value.
This avoids the rq-lock for the top level entries, since those will never
be re-weighted, and fuzzes the lower level entries a little to gain performance
in semi-stable situations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The base address of a (per cpu) clock base is a useful debug info.
Add it and bump the version number of timer_lists.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The per cpu clock events device output of timer_list lacks an
association of the device to the cpu which is annoying when looking at
the output of /proc/timer_list from a 128 way system.
Add the CPU number info and mark the broadcast device in the device
list printout.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current timer_list output prints the address of the on stack copy
of the active hrtimer instead of the hrtimer itself.
Print the address of the real timer instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We did not restart the tick device from irq_enter() to avoid double
reprogramming and extra events in the return immediate to idle case.
But long lasting softirqs can lead to a situation where jiffies become
stale:
idle()
tick stopped (reprogrammed to next pending timer)
halt()
interrupt
jiffies updated from irq_enter()
interrupt handler
softirq function 1 runs 20ms
softirq function 2 arms a 10ms timer with a stale jiffies value
jiffies updated from irq_exit()
timer wheel has now an already expired timer
(the one added in function 2)
timer fires and timer softirq runs
This was discovered when debugging a timer problem which happend only
when the ath5k driver is active. The debugging proved that there is a
softirq function running for more than 20ms, which is a bug by itself.
To solve this we restart the tick timer right from irq_enter(), but do
not go through the other functions which are necessary to return from
idle when need_resched() is set.
Reported-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Elias Oltmanns <eo@nebensachen.de>
We have two separate nohz function calls in irq_enter() for no good
reason. Just call a single NOHZ function from irq_enter() and call
the bits in the tick code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Greetings,
103638d added a bit of avoidable overhead to the fast-path.
Use sysctl_sched_min_granularity instead of sched_slice() to restrict buddy wakeups.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If NR_CPUS isn't a multiple of 32, we get a truncated string of sched
domains by catting /proc/schedstat. This is caused by the wrong mask_len.
This patch fixes it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is basically a genericization of Jens Axboe's block layer
remote softirq changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This fixes the broken 77af7e3403
("softirq, warning fix: correct a format to avoid a warning") fix
correctly.
The type of a pointer subtraction is not "int", nor is it "long". It
can be either (or something else). It's "ptrdiff_t", and the printk
format for it is "%td".
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
UIO: Fix mapping of logical and virtual memory
UIO: add automata sercos3 pci card support
UIO: Change driver name of uio_pdrv
UIO: Add alignment warnings for uio-mem
Driver core: add bus_sort_breadthfirst() function
NET: convert the phy_device file to use bus_find_device_by_name
kobject: Cleanup kobject_rename and !CONFIG_SYSFS
kobject: Fix kobject_rename and !CONFIG_SYSFS
sysfs: Make dir and name args to sysfs_notify() const
platform: add new device registration helper
sysfs: use ilookup5() instead of ilookup5_nowait()
PNP: create device attributes via default device attributes
Driver core: make bus_find_device_by_name() more robust
usb: turn dev_warn+WARN_ON combos into dev_WARN
debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
debug: Introduce a dev_WARN() function
sysfs: fix deadlock
device model: Do a quickcheck for driver binding before doing an expensive check
Driver core: Fix cleanup in device_create_vargs().
Driver core: Clarify device cleanup.
...
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: remove CONFIG_KMOD in comment after #endif
remove CONFIG_KMOD from fs
remove CONFIG_KMOD from drivers
Manually fix conflict due to include cleanups in drivers/md/md.c
Make the needlessly global kretprobe_table_lock() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional change. Just return NULL for kzalloc failure immediately,
rather than wrapping the whole function body in the body of an "if".
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchs adds the CONFIG_AIO option which allows to remove support
for asynchronous I/O operations, that are not necessarly used by
applications, particularly on embedded devices. As this is a
size-reduction option, it depends on CONFIG_EMBEDDED. It allows to
save ~7 kilobytes of kernel code/data:
text data bss dec hex filename
1115067 119180 217088 1451335 162547 vmlinux
1108025 119048 217088 1444161 160941 vmlinux.new
-7042 -132 0 -7174 -1C06 +/-
This patch has been originally written by Matt Mackall
<mpm@selenic.com>, and is part of the Linux Tiny project.
[randy.dunlap@oracle.com: build fix]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
name and nlen parameters passed to ->strategy hook are unused, remove
them. In general ->strategy hook should know what it's doing, and don't
do something tricky for which, say, pointer to original userspace array
may be needed (name).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net> [ networking bits ]
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nothing arch specific in get/settimeofday. The details of the timeval
conversion varied a little from arch to arch, but all with the same
results.
Also add an extern declaration for sys_tz to linux/time.h because externs
in .c files are fowned upon. I'll kill the externs in various other files
in a sparate patch.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add documentation in kerneldoc for new printk format extensions
This patch documents the new %pS/%pF options in printk in kernel doc.
Hope I didn't miss any other extension.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
People can use the real name an an index into MAINTAINERS to find the
current email address.
Signed-off-by: Francois Cami <francois.cami@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6dd06c9fbe ("module: make
module_address_lookup safe") introduced double returns in the function
kallsyms_lookup(), it's weird. The second one should be removed.
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
utsname() is quite expensive to calculate. Cache it in a local.
text data bss dec hex filename
before: 11136 720 16 11872 2e60 kernel/sys.o
after: 11096 720 16 11832 2e38 kernel/sys.o
Acked-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On sethostname() and setdomainname(), previous information may be retained
if it was longer than than the new hostname/domainname.
This can be demonstrated trivially by calling sethostname() first with a
long name, then with a short name, and then calling uname() to retrieve
the full buffer that contains the hostname (and possibly parts of the old
hostname), one just has to look past the terminating zero.
I don't know if we should really care that much (hence the RFC); the only
scenarios I can possibly think of is administrator putting something
sensitive in the hostname (or domain name) by accident, and changing it
back will not undo the mistake entirely, though it's not like we can
recover gracefully from "rm -rf /" either... The other scenario is
namespaces (CLONE_NEWUTS) where some information may be unintentionally
"inherited" from the previous namespace (a program wants to hide the
original name and does clone + sethostname, but some information is still
left).
I think the patch may be defended on grounds of the principle of least
surprise. But I am not adamant :-)
(I guess the question now is whether userspace should be able to
write embedded NULs into the buffer or not...)
At least the observation has been made and the patch has been presented.
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Way too often, I have a machine that exhibits some kind of crappy
behavior. The CPU looks wedged in the kernel or it is spending way too
much system time and I wonder what is responsible.
I try to run readprofile. But, of course, Ubuntu doesn't enable it by
default. Dang!
The reason we boot-time enable it is that it takes a big bufffer that we
generally can only bootmem alloc. But, does it hurt to at least try and
runtime-alloc it?
To use:
echo 2 > /sys/kernel/profile
Then run readprofile like normal.
This should fix the compile issue with allmodconfig. I've compile-tested
on a bunch more configs now including a few more architectures.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a process wants to set the limit of open files to RLIM_INFINITY it
gets EPERM even if it has CAP_SYS_RESOURCE capability.
For example, BIND does:
...
#elif defined(NR_OPEN) && defined(__linux__)
/*
* Some Linux kernels don't accept RLIM_INFINIT; the maximum
* possible value is the NR_OPEN defined in linux/fs.h.
*/
if (resource == isc_resource_openfiles && rlim_value == RLIM_INFINITY) {
rl.rlim_cur = rl.rlim_max = NR_OPEN;
unixresult = setrlimit(unixresource, &rl);
if (unixresult == 0)
return (ISC_R_SUCCESS);
}
#elif ...
If we allow setting RLIMIT_NOFILE to RLIM_INFINITY we increase portability
- you don't have to check if OS is linux and then use different schema for
limits.
The spec says "Specifying RLIM_INFINITY as any resource limit value on a
successful call to setrlimit() shall inhibit enforcement of that resource
limit." and we're presently not doing that.
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's somewhat unlikely that it happens, but right now a race window
between interrupts or machine checks or oopses could corrupt the tainted
bitmap because it is modified in a non atomic fashion.
Convert the taint variable to an unsigned long and use only atomic bit
operations on it.
Unfortunately this means the intvec sysctl functions cannot be used on it
anymore.
It turned out the taint sysctl handler could actually be simplified a bit
(since it only increases capabilities) so this patch actually removes
code.
[akpm@linux-foundation.org: remove unneeded include]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using "def_bool n" is pointless, simply using bool here appears more
appropriate.
Further, retaining such options that don't have a prompt and aren't
selected by anything seems also at least questionable.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
is_sync_wait() is used to distinguish between sync and async waits.
Basically sync waits are the ones initialized with init_waitqueue_entry()
and async ones with init_waitqueue_func_entry(). The sync/async
distinction is used only in prepare_to_wait[_exclusive]() and its only
function is to skip setting the current task state if the wait is async.
This has a few problems.
* No one uses it. None of func_entry users use prepare_to_wait()
functions, so the code path never gets executed.
* The distinction is bogus. Maybe back when func_entry is used only
by aio but it's now also used by epoll and in future possibly by 9p
and poll/select.
* Taking @state as argument and ignoring it silenly depending on how
@wait is initialized is just a bad error-prone API.
* It prevents func_entry waits from using wait->private for no good
reason.
This patch kills is_sync_wait() and the associated code paths from
prepare_to_wait[_exclusive](). As there was no user of these code paths,
this patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove a CVS keyword that wasn't updated for a long time from a comment.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently use a PM notifier to disable user mode helpers before suspend
and hibernation and to re-enable them during resume. However, this is not
an ideal solution, because if any drivers want to upload firmware into
memory before suspend, they have to use a PM notifier for this purpose and
there is no guarantee that the ordering of PM notifiers will be as
expected (ie. the notifier that disables user mode helpers has to be run
after the driver's notifier used for uploading the firmware).
For this reason, it seems better to move the disabling and enabling of
user mode helpers to separate functions that will be called by the PM core
as necessary.
[akpm@linux-foundation.org: remove unneeded ifdefs]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds an additional field to the mm_owner callbacks. This field
is required to get to the mm that changed. Hold mmap_sem in write mode
before calling the mm_owner_changed callback
[hugh@veritas.com: fix mmap_sem deadlock]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Base infrastructure to enable per-module debug messages.
I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes
control of debugging statements on a per-module basis in one /proc file,
currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG,
is not set, debugging statements can still be enabled as before, often by
defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no
affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set.
The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That
is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls
can be dynamically enabled/disabled on a per-module basis.
Future plans include extending this functionality to subsystems, that define
their own debug levels and flags.
Usage:
Dynamic debugging is controlled by the debugfs file,
<debugfs>/dynamic_printk/modules. This file contains a list of the modules that
can be enabled. The format of the file is as follows:
<module_name> <enabled=0/1>
.
.
.
<module_name> : Name of the module in which the debug call resides
<enabled=0/1> : whether the messages are enabled or not
For example:
snd_hda_intel enabled=0
fixup enabled=1
driver enabled=0
Enable a module:
$echo "set enabled=1 <module_name>" > dynamic_printk/modules
Disable a module:
$echo "set enabled=0 <module_name>" > dynamic_printk/modules
Enable all modules:
$echo "set enabled=1 all" > dynamic_printk/modules
Disable all modules:
$echo "set enabled=0 all" > dynamic_printk/modules
Finally, passing "dynamic_printk" at the command line enables
debugging for all modules. This mode can be turned off via the above
disable command.
[gkh: minor cleanups and tweaks to make the build work quietly]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
probe_irq_off() is disfunctional as the local nr_irqs is referenced
instead of the global one for the for_each_irq_desc() iterator.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
when SPARSE_IRQ is not used, should still use irq_desc->lock
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
