Commit Graph

67 Commits

Author SHA1 Message Date
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Matthew Wilcox
ee9f4b5d95 [PA-RISC] Fix sba_iommu compilation
klist_iter_exit() only takes one parameter.
Also fix warning by adding additional brackets.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2006-10-05 01:48:17 +00:00
Kyle McMartin
08a6436816 [PARISC] Add support for Quicksilver AGPGART
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:50:16 -06:00
Kyle McMartin
983daeec99 [PARISC] Move LBA and SBA register defines to the common ropes.h
header. This will allow the use of more constants in the
agpgart driver.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:50:05 -06:00
Kyle McMartin
1790cf9111 [PARISC] Create shared <asm/ropes.h> header
Pull out struct sba_device and struct lba_device into a
common ropes.h header. Also fold the parisc portion of
iosapic.h into this file. (Then delete the useless portion
of iosapic.h)

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:49:56 -06:00
Kyle McMartin
b0eecc4da9 [PARISC] Stash the lba_device in its struct device drvdata
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:49:44 -06:00
Kyle McMartin
1b240f415f [PARISC] Generalize IS_ASTRO et al to take a parisc_device like
IS_ELROY. Also remove the useless caching of the
parisc_device_id in struct sba_device.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:49:35 -06:00
Kyle McMartin
ba9877b673 [PARISC] Pretty print the name of the lba type on kernel boot
(it's pretty useless telling a user they have a whole bunch of
 TR%d.%d LBAs)

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:49:25 -06:00
Matthew Wilcox
7886089e3c [PARISC] Remove some obsolete comments and I checked that Reo is similar to Ike
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:49:15 -06:00
James Bottomley
7085689ed1 [PARISC] Allow nested interrupts
Our prior mode of operation didn't allow nested interrupts
because it makes the interrupt code much simpler.  However,
nested interrupts are better for latency.

This code uses the EIEM register to simulate level interrupts
and thus achieve nesting.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:48:57 -06:00
Kyle McMartin
6f03495d65 [PARISC] Add asm-parisc/mckinley.h bus header
Add header for McKinley bus related code. Remove extern decl
of proc_mckinley_root in drivers/parisc/sba_iommu.c

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04 06:45:48 -06:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Cedric Le Goater
9ec52099e4 [PATCH] replace cad_pid by a struct pid
There are a few places in the kernel where the init task is signaled.  The
ctrl+alt+del sequence is one them.  It kills a task, usually init, using a
cached pid (cad_pid).

This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem.  The struct pid is initialized at boot time in init() and can be
modified through systctl with

	/proc/sys/kernel/cad_pid

[ I haven't found any distro using it ? ]

It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:25 -07:00
Serge E. Hallyn
96b644bdec [PATCH] namespaces: utsname: use init_utsname when appropriate
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use.  This patch replaces those with a the init_utsname
helper.

Changes: Removed several uses of init_utsname().  Hope I picked all the
	right ones in net/ipv4/ipconfig.c.  These are now changed to
	utsname() (the per-process namespace utsname) in the previous
	patch (2/7)

[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Thomas Gleixner
8c56e7214e [PATCH] irq-flags: PARISC: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:52 -07:00
Linus Torvalds
22a3e233ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Remove obsolete #include <linux/config.h>
  remove obsolete swsusp_encrypt
  arch/arm26/Kconfig typos
  Documentation/IPMI typos
  Kconfig: Typos in net/sched/Kconfig
  v9fs: do not include linux/version.h
  Documentation/DocBook/mtdnand.tmpl: typo fixes
  typo fixes: specfic -> specific
  typo fixes in Documentation/networking/pktgen.txt
  typo fixes: occuring -> occurring
  typo fixes: infomation -> information
  typo fixes: disadvantadge -> disadvantage
  typo fixes: aquire -> acquire
  typo fixes: mecanism -> mechanism
  typo fixes: bandwith -> bandwidth
  fix a typo in the RTC_CLASS help text
  smb is no longer maintained

Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30 15:39:30 -07:00
Christoph Lameter
f8891e5e1f [PATCH] Light weight event counters
The remaining counters in page_state after the zoned VM counter patches
have been applied are all just for show in /proc/vmstat.  They have no
essential function for the VM.

We use a simple increment of per cpu variables.  In order to avoid the most
severe races we disable preempt.  Preempt does not prevent the race between
an increment and an interrupt handler incrementing the same statistics
counter.  However, that race is exceedingly rare, we may only loose one
increment or so and there is no requirement (at least not in kernel) that
the vm event counters have to be accurate.

In the non preempt case this results in a simple increment for each
counter.  For many architectures this will be reduced by the compiler to a
single instruction.  This single instruction is atomic for i386 and x86_64.
 And therefore even the rare race condition in an interrupt is avoided for
both architectures in most cases.

The patchset also adds an off switch for embedded systems that allows a
building of linux kernels without these counters.

The implementation of these counters is through inline code that hopefully
results in only a single instruction increment instruction being emitted
(i386, x86_64) or in the increment being hidden though instruction
concurrency (EPIC architectures such as ia64 can get that done).

Benefits:
- VM event counter operations usually reduce to a single inline instruction
  on i386 and x86_64.
- No interrupt disable, only preempt disable for the preempt case.
  Preempt disable can also be avoided by moving the counter into a spinlock.
- Handling is similar to zoned VM counters.
- Simple and easily extendable.
- Can be omitted to reduce memory use for embedded use.

References:

RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=113512330605497&w=2
RFC http://marc.theaimsgroup.com/?l=linux-kernel&m=114988082814934&w=2
local_t http://marc.theaimsgroup.com/?l=linux-kernel&m=114991748606690&w=2
V2 http://marc.theaimsgroup.com/?t=115014808400007&r=1&w=2
V3 http://marc.theaimsgroup.com/?l=linux-kernel&m=115024767022346&w=2
V4 http://marc.theaimsgroup.com/?l=linux-kernel&m=115047968808926&w=2

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30 11:25:36 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
4d3ce21fa9 Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (23 commits)
  [PARISC] Move os_id_to_string() inside #ifndef __ASSEMBLY__
  [PARISC] Fix do_gettimeofday() hang
  [PARISC] Fix PCREL22F relocation problem for most modules
  [PARISC] Refactor show_regs in traps.c
  [PARISC] Add os_id_to_string helper
  [PARISC] OS_ID_LINUX == 0x0006
  [PARISC] Ensure Space ID hashing is turned off
  [PARISC] Match show_cache_info with reality
  [PARISC] Remove unused macro fixup_branch in syscall.S
  [PARISC] Add is_compat_task() helper
  [PARISC] Update Thibaut Varene's CREDITS entry
  [PARISC] Reduce data footprint in pdc_stable.c
  [PARISC] pdc_stable version 0.30
  [PARISC] Work around machines which do not support chassis warnings
  [PARISC] PDC_CHASSIS is implemented on all machines
  [PARISC] Remove unconditional #define PIC in syscall macros
  [PARISC] Use MFIA in current_text_addr on pa2.0 processors
  [PARISC] Remove dead function pc_in_user_space
  [PARISC] Test ioc_needs_fdc variable instead of open coding
  [PARISC] Fix gcc 4.1 warnings in sba_iommu.c
  ...
2006-06-29 11:30:45 -07:00
Ingo Molnar
d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Kyle McMartin
67a061a191 [PARISC] Add os_id_to_string helper
Add a helper to asm/pdc.h to translate OS_ID values to strings
and use it in the pdc_stable driver.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:43 +00:00
Kyle McMartin
ec1fdc24c2 [PARISC] OS_ID_LINUX == 0x0006
We were assigned an OS_ID of 0x0006. Consistently use OS_ID_LINUX
instead of using the magic number. Also update the OS_ID_ defines in
asm/pdc.h to reflect this.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:42 +00:00
Thibaut Varene
b0e8bfca2f [PARISC] Reduce data footprint in pdc_stable.c
No code change - reduce data footprint.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:39 +00:00
Thibaut Varene
3f9edb53f7 [PARISC] pdc_stable version 0.30
pdc_stable v0.30:

This patch introduces 3 more files to the /sys/firmware/stable tree:
- diagnostic, which contains a cryptic hex string
- osdep1, a 16 bytes os-dependent storage area always available
- osdep2, another os-dependent storage area which existence/size depends
on hversion.

This patch also adds code to setup the "Linux" signature in stable
storage. That is to say that starting with this patch, the kernel will
now sign its OSID (0x0006, thx LaMont) in Stable Storage upon boot,
whether pdc_stable is enabled or not.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:38 +00:00
Thibaut Varene
8ffaeaf42e [PARISC] PDC_CHASSIS is implemented on all machines
This patch removes a limitation of the original code, so that CHASSIS
codes can be sent to all machines. On machines with a LCD panel, this
code displays "INI" during bootup, "RUN" when the system is booted and
running, "FLT" when a panic occurs, etc.

This part of the code can be enabled/disabled through CONFIG_PDC_CHASSIS

This patch also adds minimalistic support for Chassis warnings, through
a proc entry '/proc/chassis', which will reflect the warnings status (PSU
or fans failure when they happen, NVRAM battery level and temperature
thresholds overflows).

This part of the code can be enabled/disabled through CONFIG_PDC_CHASSIS_WARN

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:37 +00:00
Kyle McMartin
692086e0b3 [PARISC] Test ioc_needs_fdc variable instead of open coding
Some debugging code in sba_iommu.c should be testing ioc_needs_fdc,
not directly testing boot_cpu_data.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:35 +00:00
Grant Grundler
40d78de1ac [PARISC] Fix gcc 4.1 warnings in sba_iommu.c
Clean up gcc 4.1 warnings noted by Joel Soete.
Kyle McMartin gets kudos for pointing out the issues.
Matthew Wilcox noticed sba_iommu was using open coded versions
of (read|write)X.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-06-27 23:28:34 +00:00
Grant Grundler
b312c33e36 [PARISC] Document that we tolerate "Relaxed Ordering"
This means "DMA Read returns" can bypass "MMIO Writes".
Violating the PCI specs in this case improves outbound DMA "flows"
and is currently not required by any drivers.

This is NOT a new behavior. Previous chipsets did this
already and I believe ZX1 PDC was already setting this
for hpux. I just want to further document the behavior.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-04-21 22:20:33 +00:00
Helge Deller
67a5a59d33 [PARISC] Misc. janitorial work
Fix a spelling mistake, add a KERN_INFO flag, and fix some whitespace
uglies.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-04-21 22:20:32 +00:00
Helge Deller
5076c15862 [PARISC] I/O-Space must be ioremap_nocache()'d
Addresses in F-space must be accessed uncached on most parisc machines.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30 17:48:42 +00:00
Thibaut VARENE
a81dd18eb9 [PARISC] Clarify pdc_stable license terms
pdc_stable.c is explicitly licensed under GPL version 2.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30 17:48:41 +00:00
Alan Stern
e041c68341 [PATCH] Notifier chain update: API changes
The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Eric Sesterhenn
b74945547f BUG_ON() Conversion in drivers/parisc/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:52:10 +01:00
Kyle McMartin
7ec14e49b7 [PARISC] Convert sba_iommu.c to use seq_file
Use seq_file interface for proc output in sba_iommu. Also
clean up the bus root assignment, and give the proc files
a more logical name. Tested on my J6000.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-02-08 22:56:22 -05:00
Kyle McMartin
f823bcae2b [PARISC] Convert ccio-dma.c to use seq_file
Gut ccio-dma.c of the ugly proc append and snprintf cruft and
just use seq_printf instead. Tested on a K-class.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-02-08 22:56:16 -05:00
Kyle McMartin
16541c8745 [PARISC] Clean up printk in superio.c
Clean up some of the messages printed by the superio driver
by defining a prefix instead of duplicating it in every message.
Also some small coding style cleanups.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-22 20:26:57 -05:00
Kyle McMartin
85509c0007 [PARISC] Add chassis_power_off routine
Define a chassis_power_off routine that machines which have a way
to turn off the power supply can hook into. Formerly they were
using pm_power_off, which is now being used by generic code. Make
lasi.c use chassis_power_off instead of pm_power_off.

Note, all machines need to call machine_power_off so that the
switch can power off the machine, though halt -p may not necessarily
be able to work properly on the machine.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-22 20:26:50 -05:00
Thibaut VARENE
c742842223 [PARISC] pdc_stable version 0.22
pdc_stable v0.22, changes since v0.10:

  o renamed root subsystem from 'pdc' to 'stable'
  o split 'info' into several files, one per PDC field
  o implemented 'autoboot' and 'autosearch' write calls to toggle
    these flags
  o grant read permission to all users on "safe" files
  o more code cleanup (removed duplicate code)
  o avoid bad stable storage clobbering by write locking critical sections
  o print consistent data as well
  o SMP cleanups

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-22 20:26:35 -05:00
Helge Deller
cb6fc18e9c [PARISC] Use kzalloc and other janitor-style cleanups
Helge,
  o Convert a bunch of kmalloc/memset uses to kzalloc.
  o pci.c: Add some __read_mostly annotations.
  o pci.c: Move constant pci_post_reset_delay to asm/pci.h
  o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG.
  o Add some consts to perf.c/perf_images.h

Matthew,
  o sticore.c: Add some consts to suppress compile warnings.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-22 20:26:31 -05:00
Randy.Dunlap
c59ede7b78 [PATCH] move capable() to capability.h
- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Matthew Wilcox
f45adcf977 [PARISC] Fix Dino reporting on J2240
Fix Dino reporting on J2240. This particular machine thought it
had a Cujo. Also add J2240 Dino chip to the hp_hardware_list.

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:53:14 -05:00
Thibaut VARENE
4b991da7fe [PARISC] pdc_stable: More robust sysfs error checking
pdc_stable 0.10:
As mentioned on LKML, pdc_stable wasn't checky enough on the return
values of some calls. This patch makes it more robust to errors when
registering objects in sysfs.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:52:36 -05:00
Grant Grundler
6ca45a24cc [PARISC] Truncate overlapping PAT PDC reported ranges
Deal with overlapping LBA MMIO resources,

rp3440 PDC BUG: PDC reports lmmio range for the last rope that overlaps
with the CPU HPA. Console output was:

...
Found devices:
1. Storm Peak Fast at 0xfffffffffe798000 [152] { 0, 0x0, 0x889, 0x00004 }
2. Storm Peak Fast at 0xfffffffffe799000 [153] { 0, 0x0, 0x889, 0x00004 }
...
FAILED: lba_fixup_bus() request for lmmio_space
[fffffffff0000000/fffffffffecffffe]

Output is now:

LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe] to
[fffffffff0000000,fffffffffe797fff]

My only concern with this patch is how C8000 (PAT PDC) will report
elmmio ranges when a gfx card is installed. I'll have to test this
another day.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:52:04 -05:00
Helge Deller
4d64c9f58e [PARISC] Introduce DINO_LOCAL_IRQS and use it for gsc_find_local_irq
Fix dino by using DINO_LOCAL_IRQS as the limit for gsc_find_local_irq()
instead of the irq itself.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:51:39 -05:00
Alexey Dobriyan
45dbe9147d [PARISC] Add __user annotation to eisa_eeprom.c
Annotate eisa_eeprom_read() with __user.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:51:18 -05:00
Helge Deller
04d35d7324 [PARISC] Fix Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop
Fix irq-off-by-one for Cirrus 6832 Cardbus on RDI Tadpole PARISC Laptop.
We just DECLARE_PCI_FIXUP_ENABLE as it is unlikely that this will be
found in any other parisc system.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 21:51:11 -05:00
Helge Deller
8039de10aa [PARISC] Add __read_mostly section for parisc
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few
branches as unlikely() and cleanup a bit of code.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10 20:35:03 -05:00
Adrian Bunk
93b1fae491 spelling: s/trough/through/
Additionally, one comment was reformulated by Joe Perches <joe@perches.com>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-10 00:13:33 +01:00
Kyle McMartin
a39cf72ceb [PARISC] Make superio.c initialize before any driver needs it
Convert superio_init to use PCI_FIXUP_FINAL as ohci_pci being called
before superio_probe really makes a mess. superio_init will then fail
to register irq 20 (the "SuperIO" irq) and BUG() because ohci_pci has
stolen it before superio_fixup_irq can be moved USB to irq 1.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-17 16:44:57 -05:00
James Bottomley
c2ab64d098 [PARISC] Add IRQ affinities
This really only adds them for the machines I can check SMP on, which
is CPU interrupts and IOSAPIC (so not any of the GSC based machines).

With this patch, irqbalanced can be used to maintain irq balancing.
Unfortunately, irqbalanced is a bit x86 centric, so it doesn't do an
incredibly good job, but it does work.

Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-11-17 16:28:37 -05:00