Changed the API to support per vdev firmware statistics.
This API change is needed by the WIN team.
Change-Id: If50a767e031e6f203abc01e3dfa26dc59249bb95
CRs-Fixed: 1057751
Remove redundant request get_rssi and get_snr from function
__wlan_hdd_cfg80211_get_station. Get Stats request being sent
to firmware in same function is super set of these two request.
Change-Id: I3b478db41da10d9112437415be4775d07decb550
CRs-Fixed: 1078877
Enabling flow steering may send the peer map/unmap events
from the target to the host in a random order.When host
does not receive them in expected sequence, there is an
issue with peer management.Fix the issue by making the
firmware send the events through a single copy engine in
the same order they were generated and thus host can handle
the events properly
Change-Id: If2396a0bf943f2833e1e3a44d778054a76c65ada
CRs-Fixed: 1078976
This is a qcacld-2.0 to qcacld-3.0 propagation.
The issue is when host re-enables QPower after resume, it is setting
WMI_STA_PS_ENABLE_QPOWER to 1 (which is for QPower = 2) always and never
WMI_STA_PS_ENABLE_QPOWER to 2 (which is for QPower = 5).
This means one suspend/resume is enough to disable QPower = 5 and
change to QPower = 2.
Fix this by removing the hardcoded value of 1 and use qpower_config instead.
Change-Id: I553c1691d5d7e98c2db8c9e56e2ba68ae27af506
CRs-Fixed: 1040737
When both host and FW support a new partition, FW uses host use
the new parition HTT_TX_IPA_NEW_MSDU_ID_SPACE_BEGIN.
If FW doesn't support a new partition, host falls back to use old
HTT_TX_IPA_MSDU_ID_SPACE_BEGIN.
Handshaking is done through WMI_READY and WMI_INIT.
Change-Id: I974c931e1b4b2d84e809ec19537a09b679932568
CRs-Fixed: 1072812
Add support to log firmware version sub id
in the logs and iwpriv command 'version'
Change-Id: I1eaad763da55007d34e243509204acf12ec79955
CRs-Fixed: 1077115
In case of scan abort FW does not send WMI_SCAN_EVENT_COMPLETED
event and directly sends WMI_SCAN_EVENT_DEQUEUED or
WMI_SCAN_EVENT_START_FAILED. In this case the scan id does not
get clear and hence block Host from power collapsing.
Include WMI_SCAN_EVENT_DEQUEUED and WMI_SCAN_EVENT_START_FAILED when
accounting for completed scans, and change to tracking pending scans
with a counter instead of individual Ids.
Change-Id: Iaa2977dd5899d214251cbf4f1f8caf768725f538
CRs-Fixed: 1077518
qcacld-2.0 to qcacld-3.0 propagation
Lot of stats related info logs are periodic and cause log spam.
Add changes to remove excessive logs.
CRs-Fixed: 1066273
Change-Id: I7064630c9ee4e01eafe0b5f00626aa6f20c0403d
Fix various compilation issues coming when LFR3.0 is
disabled by undefining WLAN_FEATURE_ROAM_OFFLOAD macro
in Kbuild.
Change-Id: Id483dc9fcc57d359f13b385dd655e34c1823a77f
CRs-fixed: 1071087
SME is calling wma_set_cts2self_for_p2p_go directly.
No need to post message to MC Thread.
Change-Id: I335b1c8a6289560dbe6c0a3ccce60695922ff3ed
CRs-Fixed: 1075981
qcacld-2.0 to qcacld-3.0 propagation
Make the following enhancements to the EPNO feature:
1) Implement the reset EPNO command handler
2) Add new parameters for candidate score calculation.
Change-Id: Iad1ff9c2b003c9e3ddbc3373366686040ccb55ca
CRs-Fixed: 956649
Add RA Match and Magic Packet to the list of wakeup reasons that cause
packet contents to be dumped to the log durring wow wakeup.
Change-Id: Id7d5474b0d288ebaae3666e8da0dacc6eda4dc69
CRs-Fixed: 1076574
This is a qcacld-2.0 to qcacld-3.0 propagation.
Remove unnecessary logs and merge some of the logs together.
Change-Id: Ibf9fdf0a92cc71644f02d6890574eeed0d175d6f
CRs-Fixed: 1023849
The original qpower vendor command implementation incorrectly configured
the qpower setting in firmware. Cleanup the implementation.
Change-Id: Id84eb7cf579a29da30f3366edef24821fcd5be55
CRs-Fixed: 1075582
Change ASSERT to BUG_ON when wait for WMI_SERVICE_READY_EXT_EVENT times
out in insmod thread.
Change-Id: Ie666fd0881969a503e6b3635cdc5bb7f223776ec
CRs-Fixed: 1075166
The enhancement is to add SBS (Single Band Simultaneous)
support in hw_mode_list.
The WMI HW Mode definitions are redefined to use only
for host purpose.
Change-Id: I8b8c966b0130964c8e7de7967766629c955209d3
CRs-Fixed: 1072234
Roam_synch indication processing in host performs peer detach/attach
operations after firmware has already moved to the new peer. Out of
sequence peer unmap and map events can mess up the reference count
for reused peer_id values, which can lead to crash.
Solution:
While detaching a peer during roam sync indication processing,
copy its peer_id_ref_cnt in peer_id_to_obj array to new variable
in the same peer map for that peer id. Peer is deleted at that point.
When the unmap events come in, decrement the old ref_cnt and
map events increment the real ref_cnt.
Once the old ref_cnt goes to 0, subsequent unmap operations apply to
the real peer.
CRs-Fixed: 1063177
Change-Id: I9b20f28f17dea1647a213b9f36060109264addf0
WMA qpower API wma_set_qpower_force_sleep is obsolete and is no longer
used. Clean up unused API wma_set_qpower_force_sleep.
Change-Id: Iad32be5e11c345a542b8f8f6660987a4aff837c7
CRs-Fixed: 1075289
qcacld-2.0 to qcacld-3.0 propagation
Dump state information of HDD, SME, PE and WMA layers
into a buffer. Contents of this buffer will be copied
into user space using proc entry /proc/debugdriver/
driverdump.
Change-Id: Ifbb102e440d7df20defa1a397964cb9b55082bf9
CRs-Fixed: 955357
qcacld-2.0 to qcacld-3.0 propagation
Add changes to set Tx/Rx aggregation size. Also, add ini parameters
for Tx/Rx aggregation sizes.
Change-Id: Ia5811bf7cf7081989fde5c8cdcca84b42120b90c
CRs-Fixed: 990161
qcacld-2.0 to qcacld-3.0 propagation
If SME posts message to WMI after vdev_detach happens,
there can be a race condition.
In this case VDEV_SET_PARAM will be called after VDEV_DELETE.
Fix this with introduction of new Boolean flag "is_vdev_valid" which
will be true after VDEV_CREATE is done. This flag will be false
when deletion of vdev happens.
WMI will do VDEV_SET_PARAM only if "is_vdev_valid" true.
Change-Id: Idffd0979bd9bdefa1225d2ea6a24180d81000f48
CRs-Fixed: 964146
Driver updates its hw_mode_list entries as per hw_mode_list
given by firmware during WMI_SERVICE_READY_EVENT.
The enhancement is to update hw_mode_list entries in the driver
using the values received in WMI_SERVICE_READY_EXT_EVENT from
the firmware.
Change-Id: I5e4d97523cb7fd018767d5d2fda841f03b2406f6
CRs-Fixed: 1070005
qcacld-2.0 to qcacld-3.0 propagation
In this feature,
1) When a legacy client connects to P2P GO, Host will indicate FW
to stop NOA and start CTS2SELF.
2) Ini Support for this feature.
Change-Id: If76d8ef454633d9a02dd6057b5d6ca3e9e639ea4
CRs-Fixed: 932264
qcacld-2.0 to qcacld-3.0 propagation
Presently, in BPF set_offload structure and the filter program are
allocated separately. In certain error paths the program is not
freed correctly because of which there can be memory leaks.
Have a single allocation for the set_offload and program to avoid any
memory leaks.
Change-Id: I097d3408cc89c26e015fd6aee8668f53e8f64cf7
CRs-Fixed: 1006522
qcacld-2.0 to qcacld-3.0 propagation
If P2P-GO stop comes during ROC, it may cause WLANSAP_StopBss
API to fail. ROC is stuck as firmware is running Gscan which
is higher priority than p2p ROC scan prioirty.
This causes ROC command to be stuck in the active list for 10
seconds and will eventually cause a crash in FW when host will
try to add self peer since older peer is still present in the
FW with same mac address
Add change to increase the priority of P2P scan and cancel ROC
before calling stop AP API.
CRs-Fixed: 1065161
Change-Id: I3a62234596c8c2acc0155b483847b9adc159d757
qcacld-2.0 to qcacld-3.0 propagation
IE's numbers are not set correctly in beacon filter API.
Add changes to correct this.
Change-Id: Ib489b0fc7bc1f0a2b7414f59ed325deecb65bb8e
CRs-Fixed: 1030084
qcacld-2.0 to qcacld-3.0 propagation
TDLS connection will teardown in host on receiving teardown
event from Firmware. But if host is in WOW mode then host will
not receive teardown event from FW.
To fix this issue add TDLS connection tracker event changes in WMA.
Change-Id: I3a305e95410d2884b41e9e4183ed4eeabd733f9d
CRs-Fixed: 991993
Null pointer dereference due to duplicate vdev
detach call.
Vdev detach is triggered as part of the delete
self sta but in failure scenario del bss request
timeout handler also called the vdev detach
which triggered NULL pointer dereference in OL layer.
-Fix the del bss request timeout handler by adding
more condition checks specific to P2P as the changes
are related to P2P.
-Remove vdev stop from the vdev start timeout
handler.
Change-Id: Ibe848c89823efbb10f7dcc193157189106ba238b
CRs-Fixed: 1070817
Add changes to parse DISA parameters received from
user space and pass them to firmware for firmware
to encrypt data and send back to driver. Also, add
changes to print encrypted data received from firmware.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1064970
qcacld-2.0 to qcacld-3.0 propagation
Add changes to honor power constraint based on ini. Also, enhance
logging for power sent to fw.
Change-Id: Iefd497d76076527ca4c388cade46644a88a51932
CRs-Fixed: 1016876
Host should not honor any vendor pktlog disable command
if NO vendor pktlog enable command is sent previously.
Currently, vendor sends pktlog disable command without sending enable
command during init and because pktlog is enabled in ini by default,
Host sends the pktlog disable command to firmware which is not as expected.
To fix this, host uses reserved flag in wifi_start_log to distinguish
vendor command from iwpriv or pktlog conf tool command and vendor disable
pktlog command will be sent to firmware only when vendor pktlog enable
commands is sent previously.
Moreover, pktlog INI enable by default and Pktlog buffer size are now
controlled using a macro FEATURE_PKTLOG depending on build variant.
For production/user build, pktlog is default disable and buffer size is
1 MB, whereas for dev build, pktlog is default enable and buffer size is
10 MB.
Change-Id: If64cd522e91cbe9a6d94d8626eb758282fcfd1bd
CRs-Fixed: 1072584
As part of MBO(Multiband Operations), host driver need to supply
the default scan IEs to firmware at wifi init time using existing
VDEV SET IE command. FW uses these Scan IE's in subsequent scans,
.i.e. FW initiated Probe Requests.
As part of this fix, receive default scan IE's from supplicant,
update extended capability IE with FTM values(if ext cap IE is
present), send down the scan IE's buffer to FW which would be used
for subsequent FW initiated scans.
Change-Id: Ia23459078d93a30c9a1715e391023ee0a1de93ee
CRs-Fixed: 1039969
qcacld-2.0 to qcacld-3.0 propagation
Add changes to support qpower dynamically using vendor command.
CRs-Fixed: 1054217
Change-Id: Ibc9456c2edc4f385f637cb9e45e3f51a6a911121
qcacld-2.0 to qcacld-3.0 propagation
Memory should be allocated to radar_event only when radar phy
event needs to be sent to WMA layer.
Add changes to fix memory leak.
CRs-Fixed: 1065466
Change-Id: Ia3e93ddd47913956c27487472b6a70eb68d63fd9
qcacld-2.0 to qcacld-3.0 propagation
This commit allows the upper layers to query driver for max
message size between the host & firmware using vendor command.
Change-Id: I21db90c854e6105f00c27dec9389f2cafd4f6508
CRs-Fixed: 965244
Currently RRM scan state is not being tracked, leading to possible
suspend attempts while RRM scan is pending. Set scan state information
to prevent suspend while RRM scan is pending.
Change-Id: I1d688f137961b4cb09d13764761c8d22709c3a43
CRs-Fixed: 1072598
qcacld-2.0 to qcacld-3.0 propagation
Provide mechanism to user to enable or disable channel avoidance
indication through vendor command and also control this mechanism
using "gOptimizeCAevent" ini parameter.
By default "gOPtimizeCAevent" ini parameter is disabled. Ini param
controls the CA events based on the mode. If ini is enabled(1) then
firmware will send CA events only in SAP/GO mode and it will not send
any CA events in STA mode. If ini is disabled CA events are sent to
host in all the modes.
a. gOptimizeCAevent = 1
- When host sends ioctl(enable), FW will send "ONE" CA indication
to host(though it is duplicate).
- When host sends ioctl(disable), FW doesnot perform any action.
- Whenever any change in CA and WLAN is SAP/P2P-GO mode, FW will
send CA ind to host regardless of the ioctl status.
b. gOptimizeCAevent = 0
- FW will ignore ioctl request if received.
- CxM behavior will be as per the current implementation.
Change-Id: I9bd81b03b97a60bb81e550068742b2fc0b776ebb
CRs-Fixed: 903249
Firmware DBS mode is updated during firmware based roaming. Same change
is reflected in the host policy manager. Process hw_mode TLV in roam sync
indication event. Update cds concurrency policy after roaming. Handle
exceptions for ROAM_ABORT and HO_FAIL conditions.
Change-Id: I826c6766f73441256e5946d3167966e645f23430
CRs-Fixed: 1044336
Old generation of projects, which had only one MAC, are restricted to
use 28ms of fix active and passive dwell time when SAP session is active
but with new generation of projects, which can have two MACs, are
permitted to use longer active and passive dwell time when SAP session
is active on 2G band and DBS is supported.
Change-Id: I2638d9b7a3677c3f0b329ed8109d01baa2cffd68
CRs-Fixed: 1071353
propagation from qcacld-2.0 to qcacld-3.0.
FW sends NACK for WOW command to indicate Host to abort on going
suspend. Host prevents suspend by holding a wakelock for 1sec.
The wakelock prevents APPS supsend, but doesn't have impact on
Runtime PM. Hence Skip Holding Wakelock when NACK is recieved
in Runtime PM.
And Log the runtime stats when link resume fails.
Change-Id: I6d9385565c6d06a082e226d5211c733d124bd3a7
CRs-Fixed: 1053252
Change the log level of p2p scan messages from error
to correct log level since they are not error messages.
CRs-Fixed: 1069559
Change-Id: I68d5f6addc53e76536a989cfa7bf131f20b8dcd2
qcacld-2.0 to qcacld-3.0 propagation
As Current WMI interface need both the ARP/NS configuration
in single command. To support active offload host need to
cache the ARP/NS at wma layer so host can fill the other
request and configure down to firmware complete request
(ARP+NS).
Change-Id: Ie0a57d216379817ff0ae48f4f582c9108e8ecca1
CRs-Fixed: 1059739
Ensure logging messages in the suspend/resume paths use hdd_err() for failure
and hdd_info() for success. Also, evaluate existing messages, and polish if
appropriate.
Change-Id: I8b9509cf631058602ad6e8cd06a013af63624f00
CRs-Fixed: 1070223
DTIM period is configured during add_bss and is taken from scan
cache bss descriptor.Scan cache can have both probe response and
beacon frames, but the TIM IE is present only in beacon frames.
If scan cache has the probe response frame then DTIM values is
configured as 0.
Get the DTIM period value from beacon and configure it to FW.
Change-Id: I2b92e5e133a70d33987a50b6113681142bc4896a
CRs-Fixed: 1067558
Remove the per band chain mask support flag as the chain mask
configuration by user is not supported. And set the HT and VHT
IEs to FW unconditionally.
Change-Id: Ic29ec1019a7d83c7080409096ec41e827c4009fb
CRs-Fixed: 1068108
qdf_mem_cmp api returns zero when comparison string matches
else returns non zero. Checking return value with true/false
can cause confusion and errors.
Replace the return value check from true/false to
zero/non-zero values.
Change-Id: I485d69a4bf85d1e6273ea780af6d0423c3910686
CRs-Fixed: 1066946
Current host driver is using default pattern id 0 for various
WoW pattern configuration which is overwriting WoW rules in FW.
WoW pattern id should be unique for each vdev. Same WoW pattern
ID can be used on 2 different vdevs but on same vdev pattern id
for various WoW patterns must be unique. Add fix to make sure
unique pattern id is used for each vdev.
Change-Id: I893044ae50bee44b5e986f3c30967fad601eb057
CRs-Fixed: 1067951
qcacld-2.0 to qcacld-3.0 propagation
Fix the race condition, between 2 kernel worker threads
while shutdown is in progress.
Change-Id: I6e71ae55c57dac8c2adb36167783615e218cb481
CRs-Fixed: 834362
qcacld-2.0 to qcacld-3.0 propagation
Capture WMI version in a global variable for crashscope
to extract WMI logs.
Change-Id: I2f06eaf182bb67dceade397652f801e6311b8f68
CRs-Fixed: 978901
qcacld-2.0 to qcacld-3.0 propagation
GTX use this parameter to drop TPC and in turn TPC drop is the cause
for mcs rate drop and may happen in higher percentage. This change,
provide a way to select the desired value and reduce mcs-8 usage to
2% from 8%.
Change-Id: I64f05c8b41cf3d360819122a08eca72f3a2c1aed
CRs-Fixed: 1010564
