Fix an assignment of a const pointer to a non-const pointer in the drx397xD
demodulator driver.
This was introduced in patch eb9bd0e567365d4f607d32d8c41e201da65aa971.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Rename a few more div64_u64 which are only in -mm.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The previous code were using a div64 math specific to i386. Replace for an
asm-generic one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The module needs an external firmware file.
The module has been tested on a Pinnacle 330e, but with modules that
are currently not part of the linux-dvb tree. So consider this highly
experimental, don't use this code unless you are an experienced kernel
developer.
create mode 100644 drivers/media/dvb/frontends/drx397xD.c
create mode 100644 drivers/media/dvb/frontends/drx397xD.h
create mode 100644 drivers/media/dvb/frontends/drx397xD_fw.h
Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a bug in get_index that was introduced earlier.
Also fix two error handling lock-ups in videodev and cx18 that
where found thanks to that bug.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Instead of letting VIDEO_IR_I2C to be selected by VIDEO_IR, if I2C, convert it
into a symbol that depends on both VIDEO_IR and I2C.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Currently, saa7134 is dependent of ir-kbd-i2c, since it uses a symbol that is
defined there. However, as this symbol is used only on saa7134, there's no
sense on keeping it defined there (or on ir-commons).
So, let's move it to saa7134 and remove one symbol for being exported.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Use Hans Verkuil's suggested method of implementing get_index which doesn't
depend on class_for_each_device and instead uses the video_device array. This
simplifies the code and reduces its memory footprint.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Those changes, together with some proper patches, will allow out-of-tree
compilation for for kernels < 2.6.19
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Having an _auto suffix is less ambiguous than a 'saa711x' identifier.
It's also used like this in the saa7127 driver.
Thanks to Jean Delvare for suggesting this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The saa7127 driver supports all of SAA7126, SAA7127, SAA7128 and
SAA1729 devices. Declare all these devices, so that board drivers can
tell which device is present, instead of always relying on
auto-detection (which needs to write to the chip, eek!).
We still need the detection for ivtv, so a special device name
"saa7127_auto" can be used when the caller doesn't know exactly which
device is present.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Same issue as for cx25840: this function sets up the standard timings
and has nothing to do with VBI setup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
For several MPEG controls and the volume control the default as returned
by VIDIOC_QUERYCTRL was incorrect and did not match the actual initial
value.
This is now fixed for cx18 and ivtv.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
cx25840_vbi_setup has nothing to do with setting up VBI, but everything
with setting up the standard. Move to cx25840-core.c and rename.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
The sn9c102 driver claims to support usb-ID 0x0c45:0x6011, which is
a sn9c102 with ov6650 sensor, but the sn9c102 driver does not support the
ov6650 sensor (tested). Also the sn9c102 driver claims to support usb-ID
0x0c45:0x603f, which is a sn9c102 with CISVF10 sensor, but the sn9c102
driver does not support the CISVF10 sensor (not tested).
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
(does not work with ov6650)
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
1) Don't change the red and blue pre-gain's from their defaults
2) Actually make the powerline freq ctrl available to userspace
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
sonixb: Common code between ov6650 and ov7630.
Fix brightness oscillation with ov6650 sensor.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Thanks to http://zc0302.sourceforge.net/zc0302.php, we have some hints
about what each zc3xx register means.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
sonixb: Bad initialization of sensor for 352x288 mode.
(from Hans de Goede)
sonixj: Clean-up source.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
sonixb: Better gain for ov6650.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
gspca: Protect dq_callback() against simultaneous USB exchanges.
Temporary buffer for USB exchanges added in the device struct.
(all) Use a temporary buffer for all USB exchanges.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
gspca: Empty the application queues on streamoff ioctl.
streamon/off and qbuf ioctls may be done by any application.
Don't handle MJPEG pixel format as JPEG.
(thanks to Hans de Goede)
Authorize reqbufs ioctl when streaming.
Bad mutex unlock in poll() when streaming problem.
(thanks to Mauro Carvalho Chehab)
Don't handle 'webcam disconnected' in stream off.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
sonixb: Do auto gain for tas5110 / ov6650 sensors.
pac207: Move the auto_gain function to gspca.
gspca: New function gspca_auto_gain_n_exposure().
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
vc032x: Light frequency was not initialized.
Change the pixel format of bridge VC0321 to V4L2_PIX_FMT_YUV420
('YU12').
Set a bridge to all webcams.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch adds a simple platform camera device. Useful for testing
cameras with SoC camera host drivers. Only one single pixel format
and resolution combination is supported.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This is V3 of the SuperH Mobile CEU soc_camera driver.
The CEU hardware block is configured in a transparent data fetch
mode, frames are captured from the attached camera and written to
physically contiguous memory buffers provided by the newly added
videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors.
Changes since V2:
- remove SUPERH Kconfig dependency
- move sh_mobile_ceu.h to include/media
- add board callback support with enable_camera()/disable_camera()
- add support for declare_coherent_memory
- rework video memory limit
- more verbose error messages
Changes since V1:
- fixed the CEU driver to work with the newly updated patches
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This is V3 of the physically contiguous videobuf queues patch.
Useful for hardware such as the SuperH Mobile CEU which doesn't
support scatter gatter bus mastering.
Since it may be difficult to allocate large chunks of physically
contiguous memory after some uptime due to fragmentation, this code
allocates memory using dma_alloc_coherent(). Architectures supporting
dma_declare_coherent_memory() can easily avoid fragmentation issues
by using dma_declare_coherent_memory() to force dma_alloc_coherent()
to allocate from a certain pre-allocated memory area.
Changes since V2
- use dma_handle for physical address
- use "scatter gather" instead of "scatter gatter"
Changes since V1:
- use dev_err() instead of pr_err()
- remember size in struct videobuf_dma_contig_memory
- keep struct videobuf_dma_contig_memory in .c file
- let videobuf_to_dma_contig() return dma_addr_t
- implement __videobuf_sync()
- return statements, white space and other minor fixes
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch moves the spinlock handling from soc_camera.c to the actual
camera host driver. The spinlock_alloc/free callbacks are replaced with
code in init_videobuf(). So far all camera host drivers implement their
own spinlock_alloc/free methods anyway, and videobuf_queue_core_init()
BUGs on a NULL spinlock argument, so, new camera host drivers will not
forget to provide a spinlock when initialising their videobuf queues.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Makes SoC camera videobuf independent. Includes all necessary changes for
PXA camera driver (currently the only driver using soc_camera in the mainline).
These changes are important for the future soc_camera based drivers.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix compiler warning caused by a typo in the tda10023_attach dummy routine.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
cx18: added in cx18_ir_reset_gpio function for lirc_pvr150 like module. Also
added the ability to reset the IR chip via ioctl like ivtv. This needs the
mutex to protect gpio_dir and gpio_val in struct cx18 as gpio changes can
come from a few different asynchronous sources now.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
cx18: Add locking for struct cx18 GPIO state variables in
anticpation of adding IR microcontroller reset support for
use by external IR modules.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix the build error:
smscoreapi.c:689: error: 'uintptr_t' undeclared
Thanks to Peter Schlaf for reporting this.
Cc: Peter Schlaf <peter.schlaf@web.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix the following warnings generated by checkpatch.pl:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
251: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:30:
+#include <asm/io.h>
WARNING: Use #include <linux/scatterlist.h> instead of <asm/scatterlist.h>
1566: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:29:
+#include <asm/scatterlist.h>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
saa7134: add a separate entry for the ASUSTeK P7131 analog only
and do some eeprom detection to escape from the TVFM7135
with the same PCI subsystem on auto detection.
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
For VIDIOC_G_FMT/VIDIOC_TRY_FMT, the V4L2 API spec states:
"Drivers should not return an error code unless the input is ambiguous"
"Very simple, inflexible devices may even ignore all input and always
return the default parameters."
"When the requested buffer type is not supported drivers return an
EINVAL error code."
i.e. returning errors for unsupported fields is bad, and it's ok to
unconditionally overwrite user-requested settings
This patch makes ov7670 meet that behaviour, and brings it in line with
other drivers e.g. stk-webcam. It also fixes compatibility with (unpatched)
gstreamer.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch fixes some coding style issues.
It also fixes a NULL de-reference on driver unload.
The permissions for the module parameters were changed to 0644.
Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This has been commented out for years, it's about time to get rid of
it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Add the capability to define device-specific firmware filenames for the SMS1010,
with a mechanism to fall back to the generic firmware if the device-specific
firmware is not present.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Provide an option to enable / disable support for Siano's default usb ids.
This allows the support for Siano's USB IDs to be disabled, so that Siano's
external driver can be used, instead.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix the following 64bit build warning:
make[2]: Entering directory `/usr/src/linux-headers-2.6.24-16-generic'
CC [M] smscoreapi.o
smscoreapi.c: In function 'smscore_load_firmware_from_file':
smscoreapi.c:604: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
CC [M] smsusb.o
smsusb.c: In function 'smsusb1_load_firmware':
smsusb.c:216: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
smsusb.c:223: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
set MODULE_DESCRIPTION to "Driver for the Siano SMS1XXX USB dongle"
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Add the capability to define device-specific firmware filenames for the SMS1150,
with a mechanism to fall back to the generic firmware if the device-specific
firmware is not present.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
All dmesg spam turned off by default, for now. Values for debug:
(info=1, adv=2 (or-able)
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Set board ID in the usb_device_id table's driver_info field.
Use board name when registering the dvb adapter.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
