Enable Motion Detection Feature for Genoa USB interface
using config flag CONFIG_FEATURE_MOTION_DETECTION
Change-Id: If345705619f231d195d79e50a9bb2478641bd4df
CRs-Fixed: 2501957
Featurize DHCP indication for SAP and disable it
for QCN7605 as this feature is broken for HL
Data Path.
Change-Id: If1db649131d887a2aab18461187403b4b9a2c5b4
CRs-Fixed: 2496032
Do not enable unit-test framework by default for all Lithium
targets. Unit-test framework should only be enabled in debug builds.
Change-Id: I709d13ebb35302787377c8f36a8db0f04c2e794e
CRs-Fixed: 2498069
As for Rome, currently it usually just only support two
IPA interfaces offload, if use the default value 3, which
will cause the IPA pipe setup failure issue. So export
the max IPA interface numbers, and it's better to set
the appropriate value from build file according to
different requirement for different chipset and platform.
Meanwhile, it support SMMU on the sa415 platform, so
enable SMMU for it.
Change-Id: I2de31bcb4d38f5e7964d2cbdc2fc6f143eef510d
CRs-Fixed: 2480627
Currently ext scan is enabled by default in driver which
is increasing driver size significantly and ext scan
is not getting used anymore.
Disable ext scan with feature flag CONFIG_FEATURE_WLAN_EXTSCAN
to reduce driver size.
Change-Id: Id0fdeae6e6b71f53d3b73322aca659254d52cec8
CRs-Fixed: 2491452
Enable following special 4 ports concurrency for Auto HST
platform.
(SAP+STA) (2.4G MAC SCC)+(SAP+STA) (5G MAC SCC).
Change-Id: I6ab34606a98c1e4a670de63e12e54f2becd4d1d4
CRs-Fixed: 2457713
The functions hdd_sysfs_create_adapter_root_obj() and
hdd_sysfs_destroy_adapter_root_obj() are declared but not
implemented if CONFIG_WLAN_SYSFS is not defined but
CONFIG_FEATURE_BECN_STATS is defined. Do not enable
CONFIG_FEATURE_BECN_STATS if CONFIG_WLAN_SYSFS is not defined.
The monitor mode should not be supported by sdxprairie arch.
Change-Id: I583af70dfdba8f14e4967c805672ecd8a17640d1
CRs-Fixed: 2481850
Check if host is reaping a descriptor which is already
reaped then drop RX desc processing instead of asserting.
Macro DUP_RX_DESC_WAR added before dp_rx_dump_info_and_assert function
which does not assert for the case WAR is enabled.
Change-Id: I8a095d33e4f7e868340d9a76618c064af764386d
CRs-Fixed: 2487793
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: I0b5d7dd5a030b70e59c8581fb51d99079b38385f
CRs-Fixed: 2477332
Currently there is no ini support to configure frequencies
which needs to be avoided for the acs channel list which
may allow SAP to come up on a channel which is not preferred.
For Example there are many legacy clients which supports
2.4GHz but don't support channel 12 and 13 (or does not have
the capability to detect country change where channel 12 and
13 is valid).
In that case, if SAP comes up on channel 12/13, those legacy
clients won't be able to connect to AP.
Hence, Add a feature flag and ini to configure the frequency
list which can be avoided during acs.
Change-Id: Id106b38228f837ba056eb916004dc012e919ddd2
CRs-Fixed: 2472004
CONFIG_CHNL_MATRIX_RESTRICTION should not be defined by default.
CONFIG_CHNL_MATRIX_RESTRICTION should not be defined by HST.
Change-Id: I36154976c4e106d9910977b5990f796b889eaf82
CRs-Fixed: 2476488
qcacld-2.0 to qcacld-3.0 propagation
This change adds support for driver supported TCP
delayed ack to increase TCP RX performance in
third-party platform which does't support kernel
TCP delayed ack feature.
TCP delayed ack is dependent on count and timer
values. Whatever is achieved first will trigger
sending TCP ack.
This feature can be controlled through ini values.
gDriverDelAckTimerValue - timer value in ms
gDriverDelAckPktCount - delayed ack count
gDriverDelAckEnable - enable/disable feature
Change-Id: I8105bbb90965295b5a4aefeb00d344a90155974d
CRs-fixed: 2414224
Disable LFR2 in cld-3.2 mainline as roaming is offloaded
to firmware in LFR3. Also fix linker issues with lfr2 disabled.
Featurize LFR2 properly with adding correct header files
and bringing LFR2 only functions under WLAN_FEATURE_HOST_ROAM
compile time flag.
Change-Id: Iac81b693feaab503d371753a4d16cc3e70df2a87
CRs-Fixed: 2459786
Add feature flags DP_FLOW_CTL to featurize DP flowctl ops,
DP_PEER_MGMT to featurize peer handling in DP,
DP_POWER_SAVE to featurize power saving ops in DP.
Change-Id: I02f487fec846e9dd9ffcaf53a10e49e7a3365fff
Add a feature flag enabling support in defconfig
for the datapath event history logging feature.
CRs-Fixed: 2466616
Change-Id: I8fc2c76a927aea3e2e723cde87c69e59e03a9848
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447360
Add QCA_LL_PDEV_TX_FLOW_CONTROL for both
QCA_LL_LEGACY_TX_FLOW_CONTROL and QCA_LL_TX_FLOW_CONTROL_V2
disabled platform, avoid frame drop in driver which leads to bad TCP
TX throughput. Change NUM_TX_QUEUES to 5 for this case to avoid invalid
memory access in wlan_hdd_netif_queue_control().
Change-Id: Ifa649e31a41d1bf89eadc8cc7e9520f0e27b9fe4
CRs-Fixed: 2466996
Currently the export symbols are enabled in the driver
which is increasing the text section of driver.
Since driver does not need export symbols, disable it.
Change-Id: I463835107fc2a86ee6b4ab36edc75571f644499f
CRs-Fixed: 2462388
NAN is not supported on ROME platform, Disable
CONFIG_QCACLD_FEATURE_NAN in qca6174_defconfig.
Change-Id: I579e26c351bc95e7739a0853f4bfb467aafabbda
CRs-Fixed: 2446747
Link BLM exposed APIs to the following:-
1. csr_get_scan_result:- Link this API with filter bssids in
the reject ap list maintained by the blacklist mgr.
2. lim_assoc_rej_add_to_rssi_based_reject_list:- Link this API
with the the blacklist mgr add bssid to reject list to add the
OCE and BTM related assoc rejects.
3. Userspace avoid list parsing logic for the userspace to set
the BSSID as avoided.
Change-Id: Id51ffb80cea3f845fefe14db25d0f7acda6ea0f3
CRs-Fixed: 2461281
WiFi chip in SDXPRAIRIE supports DBS, and it is OK to start AP+AP in
DFS channel in DBS mode.
If CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE is defined, AP+AP in
DFS channel in DBS mode fails to start.
Remove CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE definition to make
AP+AP in DFS channel in DBS mode work for SDXPRAIRIE.
Change-Id: I1947b480aca2acb3245350c73935f6a4f9af964f
CRs-Fixed: 2459215
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. And
user space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425202
Change-Id: I2e828d521f0e04862a01fa1c90626f51b7f65796
Add a compile time feature flag by name RX_DESC_MULTI_PAGE_ALLOC
which will enable the memory allocation of RX descriptors using
multiple pages instead of large contiguous memory.
Change-Id: Ia3803a3685c605c79a34a0c2c000d7ed4adb7d97
CRs-Fixed: 2456267
To build multipel ko for different wlan targets, add genoa support
which will be used on AUTO platform.
Change-Id: I55e8591624ca4fe03bc06572cd2c46510eded366
CRs-Fixed: 2429383
Add new vendor cmd : QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING.
This subcommand is used to implement asynchronous beacon
reporting feature. Userspace can request driver/firmware to
report details of each beacon received whose bssid is same as
currently connected BSS's mac address. The driver will encapsulate
the details of these beacons as an asynchronous event within this
command id until userspace requests to stop sending beacons.
Change-Id: I9a32fe5431767b077983c7db90a2f825709f368c
CRs-Fixed: 2431351
Adaptive 11r feature that enables the AP to support FT-AKM
without configuring the FT-AKM in the network. The AP will
advertise non-FT akm with a vendor specific IE having Adaptive
11r bit set to 1 in the IE data. The AP also advertises the
MDE in beacon/probe response.
The STA should check the adaptive 11r capability if the AP
advertises MDE in beacon/probe and adaptive 11r capability in
vendor specific IE. If adaptive 11r capability is found,
STA should advertise the FT equivalent of the non-FT AKM.
Introdue a compile time flag WLAN_ADAPTIVE_11R_ENABLED to
enable/disable adaptive 11r support.
If the AP is adaptive 11r capable, set the is_adaptive_11r_ap
flag in bss descrtiptor. This flag will be sent in join request
and populated to pe_session. Also mark the CSR session as
adaptive 11r session based on this flag.
Add changes to check for the adaptive 11r service capability
advertised by firmware. If the host driver connects to adaptive
11r AP, enable RSO only if the firmware advertises adaptive
11r capability, else RSO should be disabled.
If the connection is adaptive 11r connection and if the adaptive
11r ini is enabled, set the adaptive_11r flag in
wmi_roam_11r_offload_tlv_param sent over the wmi command
WMI_ROAM_SCAN_MODE to the firmware. This will enable firmware to
filter the adaptive 11r AP from roam scan results.
Change-Id: If27a2393e3f4bb68942f5ebcec0135f57627f16b
CRs-Fixed: 2437988
Use WLAN_FEATURE_DP_BUS_BANDWIDTH to instead of MSM_PLATFORM for better
reading.
Change-Id: Iaed4f77b09b80ca8872a69c832491598db021232
CRs-Fixed: 2423299
Memory optimize for QCS403 platform, 1x1 chip. Reduce CE1 htt data
dest ring buffer from 512 to 256, reduce CE2 wmi dest ring buffer from
128 to 64, reduce CE9 & CE10 desg ring buffer from 512 to 64, disable
CE11 pktlog. Note: this change only affect specific WLAN build config for
extremely saving memory, for debug purose, there is another build
selecting default WLAN config for reference HW.
Change-Id: I868e74b09cdb11df3dccaa3f9e051da55724983d
CRs-Fixed: 2432631
Enable CONFIG_HOST_OPCLASS to include supported
operating class feature in host driver for genoa.
Change-Id: I44d6a3aa7c1c3372186532f7ff1f4353aba41350
CRs-Fixed: 2429681
Implement NON-QC platform TSF and TSF PLUS.
Implement gettime of PTP.
Implement TSF PLUS for SAP/GO
CRs-Fixed: 2399624
Change-Id: Id4f41a94256a8f035ae408c168c246569185c534
