Check the model type instead of PCI SSID for detection of the mic types
on Dell laptops with IDT 92HD73xx codecs. In this way, a new laptop
can be tested via model module option.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the quirk string for Dell studio 1535 (the product name wasn't
published at the time the patch was made).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
STAC/IDT driver creates "Headphone as Line-Out" switch even if there
is no line-out pins on the machine. For devices only with headpohnes
and speaker-outs, this switch shouldn't be created.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The AFG pin power-mapping isn't properly set for the fixed I/O pins
on IDT 92HD* codecs. This resulted in the low power mode after the
boot until any jack detection is executed, thus no output from the
speaker.
This patch fixes the power mapping for the fixed pins, and also fixes
the GPIO bits and digital I/O pin settings properly in stac92xx_ini().
Reference: Novell bnc#446025
https://bugzilla.novell.com/show_bug.cgi?id=446025
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added STAC_DELL_M4_3 quirk for Dell systems, also reorganized the
board config switch to assign number of digital muxes, microphones,
and SPDIF muxes via the PCI quirk defined.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for EAPD on system suspend and disabling EAPD on headphone jack
detection for STAC_DELL_M6 laptops.
This patch fixes the regressions, the silent output on HP of some Dell
laptops (see Novell bnc#446025):
https://bugzilla.novell.com/show_bug.cgi?id=446025
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed the GPIO mask and co initialization in patch_stac92hd71bxx()
so that the gpio_maks for HP_M4 model is set properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Check board preset model instead of codec->subsystem_id in
patch_92hd71bxx() so that other hardwares configured via the model
option work like the given model.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the
unsol response value is only 6-bits width and the former value
was 1<<6 which is an overrun.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The digital beep widget may have no mute control, and always enabling
the beep is ofen pretty annoying, especially on laptops.
This patch adds a mixer control "PC Beep Playback Switch" when there
is no mixer amp mute is found, and controls it on software.
Reference: Novell bnc#444572
https://bugzilla.novell.com/show_bug.cgi?id=444572
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to the recent change for multiple HP as line-out switch, only
one of the multiple headphons (usually a wrong one) is toggled
and the other pins are still disabled. This causes the silent output
problem on some Dell laptops.
Also, the hp_switch check is screwed up when a line-in or a mic-in
jack exists. This is added as an additional output, but hp_switch
check doesn't take it into account.
This patch fixes these issues: simplify hp_switch check by using
the NID instead of bool, and clean up / fix the toggle of HP pins
in unsol event handler code.
Reference: Novell bnc#443267
https://bugzilla.novell.com/show_bug.cgi?id=443267
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input pins are sometimes not initialized properly because
of the optimization check of the current pinctl code.
Force to initialize the mic input pins so that they can be set up
properly even if they were in a weird state. But keep other input
pins if already set up as input, since this could be an extra mic
pin.
Reference: Novell bnc#443738
https://bugzilla.novell.com/show_bug.cgi?id=443738
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The creation of analog-mux mixer element is missing in
patch_stac9200() due to the dynamic allocation patch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for explicitly enabling the EQ distortion hack for
systems without software biquad support.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SPDIF mute switch code seems broken. It doesn't set unmute bits
properly. Also it contains the duplicated lines (merge error?) to be
cleaned up.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixed compiler warning with possible uninitialized variable 'nid'.
CC [M] /home/mranostay/git/alsa-driver/pci/hda/patch_sigmatel.o
/home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c: In function
‘stac92xx_parse_auto_config’:
/home/mranostay/git/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:2815: warning: ‘nid’ may be used
uninitialized in this function
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Corrected invalid mixer index values on the 92hd71bxxx codec branch.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for mixers on the analog mixer on some 92hd75xx codecs,
along with adding a 'Mixer' entry for it's connection on the dmux.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for powering down VREF on standard headphone insertion, also
powers up the VREF on a headset insertion.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Set the third microphone to a default config of a 'Line In' to be
added the Input Source Mux's.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on
supporting codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added HP laptop SND_PCI_QUIRK for STAC_HP_M4.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for S/PDIF IN on reference boards quirks. Also disable the
IEC958 capture switch on boards with GPIO0 enabled.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Patch allows the last DAC in the dac_nids for the hp_nid if there is an
available one this isn't in use by a line_out entry or if hp_nid isn't already
defined. This solves the issues with the 'Headphone Playback' mixer
controls on the 92hd73xxx branch and possibly others.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels
pointer for custom SPDIF mux labels for non-standard codec connections.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for defining the number of amps and the creation
of the private_dimux dynamically for the 92hd73xx codec family.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
[Fixed a typo by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch sets the HP out not used by the "Headphone to Line Out" switch to the
hp_nid.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for controlling hardware gain amps on input ports
using a volume control mixer with a mux selecting the port being controlled.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match
the coding style.
Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added slave_dig_outs entries for several IDT codecs that have multiple
SPDIF outs, and enabled these SPDIF outs in several pin configs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fixed several noise issues with DACs and ADCs on some 92HD75xxx based codecs
with certain revision id's.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Dynamically create capture mux volume controls when a output amp is detected.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil
(www.cdibrasil.com.br/) for sponsoring this development.
Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than
one amp to power down.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Dell Inspiron 1525 seems to have a buggy BIOS setup and screws up
the recent codec parser, as reported by Oleksandr Natalenko:
http://lkml.org/lkml/2008/9/12/203
This patch adds the working model, dell-3stack, statically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Added the EQ distortion fix to the dell_m6_core_init.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.
To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.
This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.
Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
!codec->bus->modelname) {
But I think it is less elegant (if you prefer that way, I can prepare a
patch).
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added volume controls for the analog PC Beep on 92hd71bxx codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
An gpio_mask value was defined twice needlessly.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for new family of IDT codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Sort stac9205_cfg_table in the order of id numbers, and removed the
duplicated (obsoleted) entries for 0x01fc and 0x01fd. This doesn't
change the driver behavior since the old entries are all secondary.
The duplication occured due to commit dfe495d0, and the old entries
were introduced by commit ae0a8ed8.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>