Commit Graph

2117 Commits

Author SHA1 Message Date
Linus Torvalds
d659fc14cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: ensure correct logging in do_io_probe
  pcmcia: add another pata/ide ID
  pcmcia: add braces in error path
  pcmcia: struct device - replace bus_id with dev_name(), dev_set_name()
  pcmcia: setup resource information for pseudo multifunction devices.
  pcmcia: fix indentation & braces disagreement - add braces
2008-11-15 18:58:37 -08:00
Marc Pignat
980fc29f20 pcmcia: add another pata/ide ID
Support for Apacer photo steno pro card.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk
CC: linux-ide@vger.kernel.org
2008-11-09 21:35:36 +01:00
Borislav Petkov
52ebb438e9 ide-gd: re-get capacity on revalidate
We need to re-get a removable media's capacity when revalidating the
disk so that its partitions get rescanned by the block layer.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: axboe@kernel.dk
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:10 +01:00
Atsushi Nemoto
7afa05350c tx4938ide: Avoid underflow on calculation of a wait cycle
Make 'wt' variable signed while it can be negative during calculation.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: sshtylyov@ru.mvista.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:10 +01:00
Atsushi Nemoto
9d4eb0a33e tx4938ide: Do not call devm_ioremap for whole 128KB
Call devm_ioremap() for CS0 and CS1 separetely.
And some style cleanups.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:09 +01:00
Atsushi Nemoto
630a8b2500 tx4938ide: Check minimum cycle time and SHWT range (v2)
SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx
assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx
release to address invalid hold time, so it actualy applies 4 times and
so constitutes -DIOx recovery time.  Check requirement of the recovery
time and cycle time.  Also check SHWT maximum value.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:09 +01:00
Alan Cox
ccd32e221c ide: Switch to a common address
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:08 +01:00
Borislav Petkov
9bd27cba1a ide-cd: fix DMA alignment regression
e5318b531b ("ide: use the dma safe check for
REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to
turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading
performance and ultimately causing an excessive amount of underruns.

The issue is documented also in:
http://bugzilla.kernel.org/show_bug.cgi?id=11742.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Valerio Passini <valerio.passini@unicam.it>
[bart: fixup patch description per comments from Sergei Shtylyov]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02 21:40:07 +01:00
Al Viro
1137fb6704 arm ide breakage
a) semicolon before the function body is a bad idea
b) it's const struct foo, not struct const foo
c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver()
d) compiling is occasionally useful.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26 09:35:05 -07:00
Bartlomiej Zolnierkiewicz
fa3fd7204e ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c
Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:24:20 +02:00
Bartlomiej Zolnierkiewicz
c77380d453 ide-disk: set non-rotational queue flag for SSD and CF devices
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:09 +02:00
Márton Németh
64c2eae225 ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list
The "TEAC CD-ROM CD-224E" cannot close its tray, so add it to the NO_AUTOCLOSE
list. This will correct the "Can close tray" field of /proc/sys/dev/cdrom/info.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
[bart: minor fixups to patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:09 +02:00
Atsushi Nemoto
28502848f5 ide: Add tx4938ide driver (v2)
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode.
It has custom set_pio_mode and some hacks for big endian.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Cc: sshtylyov@ru.mvista.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:08 +02:00
Atsushi Nemoto
3789798923 ide: Add tx4939ide driver (v6)
This is the driver for the Toshiba TX4939 SoC ATA controller.

This controller has standard ATA taskfile registers and DMA
command/status registers, but the register layout is swapped on big
endian.  There are some other endian issue and some special registers
which requires many custom dma_ops/tp_ops routines and build_dmatable.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: ralf@linux-mips.org
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Arjan van de Ven
1f1ab2745b ide: two more pci_ioremap_bar() conversions
based on suggestion from Sergei Shtylyov, there are two more places
where using pci_ioremap_bar() makes sense.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Arjan van de Ven
283435621a pci: use pci_ioremap_bar() in drivers/ide
Use the newly introduced pci_ioremap_bar() function in drivers/ide.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Sergei Shtylyov
95a84cd192 sgiioc4: use ide_host_add() (take 2)
Convert the driver to use ide_host_add() -- this seems to be a straightforward
change which I'm not sure why hasn't been done yet...

While doing this at last, get rid of:

- useless local copy of the 'sgiioc4_port_info' variable;

- unnecessary 'goto' and label...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:06 +02:00
Sergei Shtylyov
3059ef99a1 sgiioc4: fix error cleanup path (take 2)
The driver "forgot" to call iounmap() iff request_mem_region() call failed in
sgiioc4_ide_setup_pci_device()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:06 +02:00
Linus Torvalds
2248485640 Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
  [PATCH] kill the rest of struct file propagation in block ioctls
  [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
  [PATCH] get rid of blkdev_locked_ioctl()
  [PATCH] get rid of blkdev_driver_ioctl()
  [PATCH] sanitize blkdev_get() and friends
  [PATCH] remember mode of reiserfs journal
  [PATCH] propagate mode through swsusp_close()
  [PATCH] propagate mode through open_bdev_excl/close_bdev_excl
  [PATCH] pass fmode_t to blkdev_put()
  [PATCH] kill the unused bsize on the send side of /dev/loop
  [PATCH] trim file propagation in block/compat_ioctl.c
  [PATCH] end of methods switch: remove the old ones
  [PATCH] switch sr
  [PATCH] switch sd
  [PATCH] switch ide-scsi
  [PATCH] switch tape_block
  [PATCH] switch dcssblk
  [PATCH] switch dasd
  [PATCH] switch mtd_blkdevs
  [PATCH] switch mmc
  ...
2008-10-23 10:23:07 -07:00
Bartlomiej Zolnierkiewicz
2bfba3c444 ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 20:57:23 +02:00
Al Viro
a4600f8139 [PATCH] switch ide-tape
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:27 -04:00
Al Viro
b2f21e057d [PATCH] switch ide-gd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:25 -04:00
Al Viro
488ca606f1 [PATCH] switch ide-cd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:23 -04:00
Al Viro
d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro
badf8082c3 [PATCH] switch ide_disk_ops ->ioctl() to sane prototype
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:30 -04:00
Al Viro
bbc1cc9784 [PATCH] switch cdrom_{open,release,ioctl} to sane APIs
... convert to it in callers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:22 -04:00
Al Viro
1bddd9e645 [PATCH] lose the unused file argument in generic_ide_ioctl()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:16 -04:00
Al Viro
74f3c8aff3 [PATCH] switch scsi_cmd_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:14 -04:00
Al Viro
86d434dede [PATCH] eliminate use of ->f_flags in block methods
store needed information in f_mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:08 -04:00
Al Viro
aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Linus Torvalds
72558dde73 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits)
  ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
  scc_pata: kill unused variables
  sgiioc4: kill duplicate ioremap()
  sgiioc4: kill useless address checks
  delkin_cb: add PM support
  ide: remove broken hpt34x driver
  ide-floppy: remove idefloppy_floppy_t typedef
  sgiioc4: remove maskproc() method
  hpt366: cleanup maskproc() method
  ide: mask interrupt in ide_config_drive_speed()
  hpt366: fix compile warning
  ide: remove unused macros from <asm-parisc/ide.h>
  ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h>
  ide: remove dead <asm-arm/arch-sa1100/ide.h>
  ide: fix support for IDE PCI controllers using MMIO on frv
  ide-cd: remove stale comment
  ide-cd: small drive type print fix
  ide-cd: debug log enhancements
  ide: add generic ATA/ATAPI disk driver
  ide: allow device drivers to specify per-device type /proc settings
  ...
2008-10-20 13:12:39 -07:00
Bartlomiej Zolnierkiewicz
769b49ce68 ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
commit 14c123f371 ("ide: cleanup
ide_build_dmatable()") accidentally reverted TRM290 fix introduced
by commit 22e05b4549 ("ide-dma: fix
ide_build_dmatable() for TRM290").

Reported-by: Sergei Shtylylov <sshtylyov@ru.mvista.com>
Acked-by: Sergei Shtylylov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:18 +02:00
Sergei Shtylyov
a11e2afa77 scc_pata: kill unused variables
Fix the "unused variable" warning in init_hwif_scc() caused by the commit
48c3c10726 (ide: add struct ide_host (take 3)).
Moreover, remove the write-only variable 'dma_status_port' in init_setup_scc()
about which gcc gives no warning and which has been there from the very start...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:17 +02:00
Sergei Shtylyov
107111d450 sgiioc4: kill duplicate ioremap()
By the time ide_dma_sgiioc4() gets called, sgiioc4_ide_setup_pci_device() will
have called ioremap() on the whole BAR0 region, so calling ioremap() on the DMA
registers means wasting a page. Replace this call by a mere address calculation,
based on the fact that IRQ registers (pointed to by 'hwif->io_ports.irq_addr')
are situated at offset 0 from BAR0.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:17 +02:00
Sergei Shtylyov
8108b88232 sgiioc4: kill useless address checks
The driver performs a number of checks on the virtual/physical addresses which
would always evaluate as true (except ide_dma_sgiioc4() -- always false):

- for sgiioc4_init_hwif_ports(), its caller, sgiioc4_ide_setup_pci_device(),
  guarantees that 'ctrl_port' and 'irq_port' parameters are never 0;

- in sgiioc4_read_status(), we always read the IDE status register, so there's
  no need to check the register's address (must be a leftover from the times
  when this function implemented the INB() method);

- in ide_dma_sgiioc4(), 'dma_base' can never be 0 as IOC4_DMA_OFFSET is not 0.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Bartlomiej Zolnierkiewicz
8c061a40c2 delkin_cb: add PM support
* Factor out chipset initialization code from delkin_cb_probe()
  to delkin_cb_init_chipset().

* Assign ->init_chipset in struct delkin_cb_port_info.

* Add delkin_cb_{suspend,resume}() (->suspend/->resume methods).

Fixes kernel bugzilla bug #11735:

http://bugzilla.kernel.org/show_bug.cgi?id=11735

Tested-by: bumble.bee@xs4all.nl
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Bartlomiej Zolnierkiewicz
41d1a3d31d ide: remove broken hpt34x driver
No big loss since HPT343/363 controllers are properly supported
by pata_hpt3x3 driver from Alan Cox.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Bartlomiej Zolnierkiewicz
0df962777b ide-floppy: remove idefloppy_floppy_t typedef
There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Sergei Shtylyov
ea656980f4 sgiioc4: remove maskproc() method
Since the maskproc() method calls either mirror the interrupt en/disable via
the nIEN bit of the device control register done by the IDE core before issuing
a command or unmask the interrupt after a command executed in polled mode (when
interrupt is already not expected), it is pointless to implement this method
by manipulating the nIEN bit...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:16 +02:00
Sergei Shtylyov
ea2ac5a3b7 hpt366: cleanup maskproc() method
Since the maskproc() method calls either mirror the interrupt en/disable via
the nIEN bit of the device control register done by the IDE core before issuing
a command or unmask the interrupt after a command executed in polled mode (when
interrupt is already not expected), it is pointless to manipulate the nIEN bit
in this method; therefore, just do nothing for the drives not on the quirk list.
Move the code to the left by using an early return and the 'else if' construct,
while at it....

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: fix checkpatch.pl warning]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:15 +02:00
Sergei Shtylyov
e5403bff8a ide: mask interrupt in ide_config_drive_speed()
Apparently, there is no sense in unmasking IRQ on the controller when you call
disable_irq_nosync() before doing this, set the nIEN bit afterwards, and then
unmask IRQ again after the command completion, hence 0 passed to SELECT_MASK()
before issuing the command in ide_config_drive_speed() is probably just a typo.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:15 +02:00
Bartlomiej Zolnierkiewicz
79104c687c hpt366: fix compile warning
Fixup for commit 1785192b53
("hpt366: add hpt3xx_disable_fast_irq() helper"):

   CC      drivers/ide/pci/hpt366.o
drivers/ide/pci/hpt366.c: In function `init_hwif_hpt366':
drivers/ide/pci/hpt366.c:1290: warning: unused variable `dev'

Reported-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:15 +02:00
Borislav Petkov
2a2267e7b1 ide-cd: remove stale comment
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
[bart: split-up this change from a bigger patch]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Borislav Petkov
419a5b67c3 ide-cd: small drive type print fix
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Borislav Petkov
71b429ca4d ide-cd: debug log enhancements
Add some more verbosity to key function calls in ide-cd debug code. While at it,
delete a superfluous comment.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Bartlomiej Zolnierkiewicz
806f80a6fc ide: add generic ATA/ATAPI disk driver
* Add struct ide_disk_ops containing protocol specific methods.

* Add 'struct ide_disk_ops *' to ide_drive_t.

* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.

* Merge ide-{disk,floppy} drivers into generic ide-gd driver.

While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Bartlomiej Zolnierkiewicz
79cb380397 ide: allow device drivers to specify per-device type /proc settings
Turn ide_driver_t's 'proc' field into ->proc_entries method
(and also 'settings' field into ->proc_devsets method).  Then
update all device drivers accordingly.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:13 +02:00
Bartlomiej Zolnierkiewicz
9a6eb74d07 ide: prepare for merging ide-gd-floppy.c with ide-gd.c
- idefloppy_ref_mutex -> ide_disk_ref_mutex
- idefloppy_cleanup_obj() -> ide_disk_release()
- ide_floppy_get() -> ide_disk_get()
- ide_floppy_put() -> ide_disk_put()
- ide_floppy_capacity() -> ide_gd_capacity()
- ide_floppy_remove() -> ide_gd_remove()
- ide_floppy_probe() -> ide_gd_probe()
- idefloppy_driver -> ide_gd_driver
- idefloppy_open() -> ide_gd_open()
- idefloppy_release() -> ide_gd_release()
- idefloppy_getgeo() -> ide_gd_getgeo()
- idefloppy_media_changed() -> ide_gd_media_changed()
- idefloppy_revalidate_disk() -> ide_gd_revalidate_disk()
- idefloppy_ops -> ide_gd_ops
- idefloppy_init() -> ide_gd_init()
- idefloppy_exit() -> ide_gd_exit()

- 'floppy' -> 'idkp' in ide_disk_*() and ide_gd_*()
- idefloppy_floppy_t -> struct ide_floppy_obj

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:13 +02:00
Bartlomiej Zolnierkiewicz
c84d9bbe7c ide-floppy: factor out generic disk handling code to ide-gd-floppy.c
While at it:
- idefloppy_do_request() -> ide_floppy_do_request()
- idefloppy_end_request() -> ide_floppy_end_request()
- idefloppy_setup() -> ide_floppy_setup()

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:13 +02:00
Bartlomiej Zolnierkiewicz
cedd120cac ide-disk: use IDE_DFLAG_MEDIA_CHANGED
Set IDE_DFLAG_MEDIA_CHANGED in ide_gd_open() to signalize
ide_gd_media_changed() that that media has changed (instead
of relying on IDE_DFLAG_REMOVABLE).

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:12 +02:00