Auth request is not sent out due to which assoc reject is observed.
As part of the vdev down firmware clears the software tx queue which
is blocked due to the "Ia5394390d376c638b3976d446a6ecc98d0584159"
change. So reverting this change will enable
the vdev down and clears the tx queue.
This reverts commit-id "Ia5394390d376c638b3976d446a6ecc98d0584159"
Change-Id: If7d7ca5939f7586b12d84d6e070e94bb5e7e6c2c
CRs-Fixed: 1057329
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 7 set the HDD_DISALLOW_LEGACY_HDDLOG flag so that no future
changes can introduce new instances of legacy logging.
Change-Id: I09ed8f80764cc7b55bbcdd506253f56b5ee07937
CRs-Fixed: 937663
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 6 update the following functions:
wlan_hdd_auto_shutdown_cb()
wlan_hdd_auto_shutdown_enable()
hdd_stop_bus_bw_compute_timer()
wlan_hdd_check_custom_con_channel_rules()
wlan_hdd_stop_sap()
wlan_hdd_start_sap()
Change-Id: I87781017f43b2e40ede02448d7332b6ee18465f1
CRs-Fixed: 937663
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 5 update the following functions:
hdd_ch_avoid_cb()
hdd_init_channel_avoidance()
hdd_populate_random_mac_addr()
hdd_cnss_wlan_mac()
hdd_wlan_startup()
hdd_softap_sta_deauth()
hdd_softap_sta_disassoc()
hdd_softap_tkip_mic_fail_counter_measure()
wlan_hdd_disable_roaming()
wlan_hdd_enable_roaming()
wlan_hdd_send_svc_nlink_msg()
Change-Id: If71de96e81600f2a5136a0907b2404a8e2a05a8b
CRs-Fixed: 937663
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 4 update the following functions:
hdd_skip_acs_scan_timer_handler()
hdd_wlan_set_ht2040_mode()
hdd_wlan_notify_modem_power_state()
hdd_post_cds_enable_config()
hdd_exchange_version_and_caps()
hdd_bus_bw_compute_cbk()
wlan_hdd_init_tx_rx_histogram()
wlan_hdd_display_tx_rx_histogram()
wlan_hdd_display_netif_queue_history()
Change-Id: Ibfd53f4f2703dba8c7ce96368392afa3c0c12d5b
CRs-Fixed: 937663
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 3 update the following functions:
hdd_cleanup_actionframe()
hdd_cleanup_adapter()
hdd_open_adapter()
hdd_close_adapter()
wlan_hdd_reset_prob_rspies()
hdd_stop_adapter()
hdd_reset_all_adapters()
hdd_start_all_adapters()
hdd_get_adapter_by_vdev()
hdd_wlan_exit()
__hdd_wlan_exit()
Change-Id: I4eaedea4a7e7da5d4f0284be4ad2ca5d05f8b98a
CRs-Fixed: 937663
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 2 update the following functions:
__hdd_stop()
__hdd_uninit()
hdd_open_cesium_nl_sock()
__hdd_set_multicast_list()
hdd_register_interface()
hdd_sme_close_session_callback()
hdd_check_and_init_tdls()
hdd_init_station_mode()
Change-Id: Ia181a89d55b2e584739a543a0d163877b474d3ae
CRs-FIxed: 937663
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_main.c to use the unified set of APIs. Since there are a
large number of changes in this file, perform the conversion in
phases.
For phase 1 update the following functions:
__hdd_netdev_notifier_call()
hdd_checkandupdate_phymode()
hdd_set_ibss_power_save_params()
hdd_update_macaddr()
hdd_update_tgt_services()
hdd_update_tgt_ht_cap()
hdd_update_tgt_vht_cap()
hdd_update_tgt_cfg()
Change-Id: Id394b038f35c3f663ae6a00f49c903dc52f4f4a2
CRs-Fixed: 937663
Currently the HDD code uses a variety of logging APIs. In
qcacld-3.0 HDD should converge on a unified set of logging APIs.
Update wlan_hdd_ftm.c to use the unified set of APIs.
Change-Id: I58b2214ba1243e93dd5e3c9b6774c08537094139
CRs-Fixed: 937659
Log rx packet in packetlog as per HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
message from firmware.
CRs-Fixed: 970647
Change-Id: I5773b67a9269063531d038d46ac404c978818dcc
Currently packet logging can be enabled by using the pktlogconf tool.
* Customers are not happy running the user program to collect the logs.
* There are chances of running pktlogconf between traffic.
* If packet logging is enabled after the issue has happened, we will
miss the crucial debug info.
Hence introduce a mechanism to enable packet logging during driver load.
Change-Id: I3138e252e02009094d61150a55172b49f9fca4fd
CRs-Fixed: 970647
If channel 144 is disabled in service ready event, host is only
disabling the channel in corestack. Fix that by also disabling the
channel in wiphy, which is used by kernel and user-space.
Change-Id: I4222aef646ede78d97b554faaf7f0c5b627feec0
CRs-Fixed: 1054102
US regulatory domain is FCC3_FCCA and not FCC8_FCCA. Fix that.
Also add regulatory domain APL8_WORLD to regulatory tables.
Bolivia and Nigeria map to APL8_WORLD.
Change-Id: I539d2720f08026a06669b1c5117523667dfcef52
CRs-Fixed: 1053513
qcacld-2.0 to qcacld-3.0 propagation
Currently indoor channels are unconditionally set to
IEEE80211_CHAN_PASSIVE_SCAN in driver. Add logic to report INDOOR
channel as passive channel only when gindoor_channel_support is FALSE.
Change-Id: Iab55a394a28ff452c06c739f3fbd47506eda85eb
CRs-Fixed: 955272
While processing ROAM_OFFLOAD_SYNCH_IND, delete the peer entry
even if reference count is non-zero sine firmware has already
deleted that peer. It allows addition of new peer without waiting
for peer_unmap events. Fix the logic error in checking the timeout
in ol_txrx_peer_attach().
Change-Id: Ib028c29863d4e95ccac434f7d47bfedd59ef883f
CRs-Fixed: 1046754
In following conditions RX LDPC support needs to be enabled
1) when STA is coming up in 5G band
2) when IBSS is coming up in 5G band
for anyother cases RX LDPC needs to be disabled. If user has
choosen RX LDPC to be disabled from INI file then it needs to
be disabled for all the cases including above mentioned cases.
To achieve this, take the intersection of global, INI, and harware
specific RX LDPC settings.
Change-Id: Iae10aa4a8c0931cdb796cd9c8ff558d4bc8e0aed
CRs-Fixed: 1050004
this patch will fix the memory leak caused by pmfSaQueryTimer
which was encountered during stress and stability tests.
Change-Id: I5a2367302e0eac3a024626795a4469d1ced76e8c
CRs-Fixed: 970527
Change structure names to fix WIN compilation when used in
coexistence with MCL codebase.
Change-Id: Ife09989e1f0f0c4d619f73c5960968d3a6721b6e
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
In sap_acs_channel_check fix ‘if’ condition will be always true for any
given channel, this will fail to validate if the given channel is in ACS
channel range.
Fix the if condition check from logical OR to AND to validate given channel
is within the ACS start and end channel range.
Change-Id: I1d69c9d440e641b052fd6098d1c99f22a64e9a9d
CRs-Fixed: 1056036
The enableOverLapCh is not populated from HDD context, So sap_filter_over_lap_ch
function always filter overlapping channel causing ACS to select only
non-overlapping channel.
Populate enableOverLapCh from HDD context to SAP context.
Change-Id: I99b1ada48573e8b03ab42a94d98f92f7b0b0e871
CRs-Fixed: 1055071
Propagation from qcacld-2.0 to qcacld-3.0.
1) Add check to find IPV6 mcast packet embedded in a
link layer unicast packet in wma_wow_wake_up_stats.
2) Add extra length check for IPV4 packets.
Change-Id: Ic2af69032262237b8751019817ae181913346818
CRs-Fixed: 1049254
Propagation from qcacld-2.0 to qcacld-3.0.
Correct the updation of various wow wakeup counts.
Change wow_icmpv6_uc_bc_count to wow_icmpv6_count
as there is no broadcast in case of ipv6.
Change-Id: Iceaf1226edbf909ca3881e049c33f7d121860ef2
CRs-fixed: 1049254
Propagation from qcacld-2.0 to qcacld-3.0.
Presently in updating wma_wow_wake_up_stats, icmpv4 and icmpv6
counts are increased just by checking ICMP protocol offset byte
and ICMPV6 protocol offset byte without checking for whether it
is a IPV4 or IPV6 packet. So it is possible that for ICMPV6 packet,
the IPV4 protol offset byte is equal to ICMP protocol or for some
ICMP packet, the IPV6 protocol byte is equal to ICMPV6 protocol and
thus both the icmpv4 and icmpv6 counts will get increased for that packet.
Add ipv4 and ipv6 packet checks as well in addition to the present checks
to avoid wrong increment in the counts.
Change-Id: I2d6e5d095d2f4b2dd474b9338bfc830b04bfa533
CRs-fixed: 1048651
Disallow host requesting for 2x2 chain if hardware is not capable of or
ini setting disabled it. Downgrade the request to 1x1 instead. No need for
waiting for NSS update to complete as all requests are serialized through
SME cmd queue.
Change-Id: Ifee4ce15771b57ac3cc1e85650c56f426c34c833
CRs-Fixed: 1037816
The existing peer_map_unmap_lock in ol_txrx_peer_find_add_id
does not include call to ol_txrx_peer_unref_delete. The peer addition
handling needs to be atomic with peer reference deletion (in case peer
ref deletion is required).
Move the peer_map_unmap_lock to include ol_txrx_peer_unref_delete.
CRs-Fixed: 1056442
Change-Id: Ica15ea70527f0ea116b960dd7958da73f304288b
qcacld-2.0 to qcacld-3.0 propagation
The problem with the existing code is:
* WMA_STA_WOW_DEFAULT_PTRN_MAX is set to 4 and in wma_wow_sta()
we make sure atleast WMA_STA_WOW_DEFAULT_PTRN_MAX free slots are
available before configuring the default wow pattern. But after this
check we are actually configuring 5 default wow patterns.
* If BPF is enabled, we are limiting the Max WoW patterns to 2,
because the free slots are 2 which is less than the expected default
free slots WMA_STA_WOW_DEFAULT_PTRN_MAX. we are not configuring
default STA mode wow pattern and hence no wakeups observed for
incoming packets.
Address this issue by changing the WMA_STA_WOW_DEFAULT_PTRN_MAX to 5 and
MAX WoW filters to WMA_STA_WOW_DEFAULT_PTRN_MAX if BPF is enabled.
Change-Id: If433cff18ce511e7fdffadff69ee13b762a1719b
CRs-Fixed: 973054
qcacld-2.0 to qcacld-3.0 propagation
* Set BPF filter only if the station/p2p client is in the connected
state.
* Depending on the BPF service enabled in firmware dynamically
configure the number of wow filters.
- If bpf enabled maxwowfilter is 2.
- If bpf is disabled maxwowfilter is read from ini.
Change-Id: I14c722c9a1189f4ba4fbc2c8a554ae85b7a61fa8
CRs-Fixed: 967535
With SAP+STA concurrency there shall be a new interface created softap0 on
which SAP comes up. In the present scenario the support for starting
the ap adapter only via the change interface.
Since the SAP adapter is not started the start_bss request from the
upper layer fails.
To migitate the issue add support for the start ap adapter from the
__wlan_hdd_add_virtual_intf.
Change-Id: I4d112441b5aa7ff91dafa9e43f9aceb18d0e13f0
CRs-Fixed: 1056331
qcacld-2.0 to qcacld-3.0 propagation
Currently ICMP counter is incremented only for IPV4 multicast packets.
But ICMP count includes total unicast/multicast/broadcast ICMP packets.
Add changes to update ICMP counter for unicast/multicast/broadcast
ICMP packets.
Change-Id: I00f9fb0c8231fd69f6c108ced8028eb19315006e
CRs-Fixed: 1020079
qcacld-2.0 to qcacld-3.0 propagation
Send wakelock stats to HAL layer when it requests through vendor
command QCA_NL80211_VENDOR_SUBCMD_WAKELOCK_STATS. This is a
blocking request in HDD.
Change-Id: Ie043323d90f63c19de2da9d1b8b54bc28d2c8f3d
CRs-Fixed: 958964
hdd_napi_event requires hif_ctx, after dynamic mode feature hif_ctx
is getting created later as part of hdd_start_modules. HIF ctx is being
created/destroyed depending on the interface up/down from the upper
layer, hence set NAPI event after hif layer is initialized.
Change-Id: I9fb21f6f75cc689620a6befd997956610e2ca3ae
CRs-fixed: 1055660
KR and CN have different DFS regions than what kernel provides.
Assign the correct DFS regions for KR and CN. Also use "enum
dfs_region" as the parameter type in functions that have
dfs region as parameter.
CRs-Fixed: 1047214
Change-Id: I2ddd67d3c29a448dd2a1d3a63113750783fb6731
send WLAN off event to WLS at the end of WLAN off steps
to make sure WLAN is really off when WLS calls 'glink deinit'.
Change-Id: I29e15d51ec306071fc9f5ff7e3565c75814944e8
CRs-Fixed: 985226
