Do not tie up names with mailbox.
This results from SDIO HIF refactoring.
See qcacmn: I12bdf8b07350411093ba35071411525a8333cf93
Change-Id: I99184fbfc95a601f09dba5891098c35d5aa794c5
CRs-Fixed: 2252448
Presently, while processing start_bss, after retrieving WPS IE from
the beacon frame, 15th byte of WPS IE is accessed to get WPS state,
without confirming IE length holds that much minimum length to access.
Before accessing 15th byte(WPS state) of WPS IE, make sure IE length
holds minimum length to access it.
Change-Id: Ic00c700a1fbf88183b8b2d834c9700b538700ce7
CRs-Fixed: 2239164
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the cds folder.
Change-Id: I689e80fefa0068980a2bf78d2eff13d0892f8d95
CRs-Fixed: 2266521
Change "qcacld-3.0: Introduce mac_handle_t" introduced a modern name
for what was previously called the tHalHandle. Subsequently change
"qcacld-3.0: Use mac_handle_t in wlan_hdd_stats" transitioned
wlan_hdd_stats to use the new naming. But while that change was in the
pipeline a new instance of tHalHandle was added. So now transition the
instance recently added to wlan_hdd_clear_link_layer_stats().
Change-Id: I2d17c729a92eb5c545b829fc6699e34233116f94
CRs-Fixed: 2266545
No valid channel found when DUT as P2P GO and radar signal detected,
stop ap and then up layer start ap again, session id of adapter
changed to invalid since session id of sap context is invalid and
passed to adapter in hdd_hostapd_sap_event_cb with event
eSAP_START_BSS_EVENT. So, do not clear session id of sap context for
stopping ap due to invalid channel case.
Change-Id: I3d60ae9b4ec8223dff26ffd9078b31e02bf29ba2
CRs-Fixed: 2257932
Change "qcacld-3.0: Introduce mac_handle_t" introduced a modern
name for what was previously called the tHalHandle. Transition
wlan_hdd_cfg to use the new naming.
Change-Id: Ib3a9d26cb8966b52b71e97d7b9fb8f2cca9ed916
CRs-Fixed: 2266499
Change "qcacld-3.0: Introduce mac_handle_t" introduced a modern
name for what was previously called the tHalHandle. Transition
wlan_hdd_ext_scan to use the new naming.
Change-Id: I69f8a76ae798ed00953727b7687f53506acd22d3
CRs-Fixed: 2266498
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the mac sys folder.
Change-Id: Ia1d4a570b7c79ea2bd0ad5f82d287c48f73051b9
CRs-Fixed: 2266497
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the mac dph folder.
Change-Id: I150e024f9b764547267dc8b4673a95e3366c6b70
CRs-Fixed: 2266147
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the mac pe/nan folder.
Change-Id: I762d963f5c19f797b9fe0bc933368d4d700de7b3
CRs-Fixed: 2266394
Change "qcacld-3.0: Introduce mac_handle_t" introduced a modern
name for what was previously called the tHalHandle. Transition
wlan_hdd_assoc to use the new naming.
Change-Id: I33e58d6c51124036d00e37fa3018379b7f99105a
CRs-Fixed: 2266433
The change id I50c357ca0f8ddfcc1a51ad4ed040961daf052459
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I33d83b5777ea259e29175e632a36e5fec3be24bc
CRs-Fixed: 2262351
While processing get_station cfg operation, HDD is using Nss
value, which gets updated during association, to calculate data
rate. So, there is a possibility of driver to report invalid
MCS index to upper layer if association happens with Nss 2 and
when data transmission is happening at Nss 1 rate.
On receiving GET STATS response, calculate Nss value based upon
the current data rate received from firmware, and pass it to HDD,
so that HDD can use the same Nss value to report valid MCS index
to the upper layer.
Change-Id: I62f029d53149a4747f619027ce69ce65fb280b8d
CRs-Fixed: 2250993
The SME message callback is currently being used in a manner that is
inconsistent with its signature. The signature specifies that a
tHalHandle should be passed but PE actually passes a tpAniSirGlobal.
Since this is a MAC internal interface update the logic to
consistently use a tpAniSirGlobal.
Change-Id: I8bf94a3dd603b76bdbe7c0db3555736692f64cb7
CRs-Fixed: 2266188
The function lim_handle_csa_offload_msg, posts the
eWNI_SME_CSA_OFFLOAD_EVENT msg to sme. The csa_offload_ind
allocated is not freed during failure cases and this will result
in memory leak during the failure cases.
Free the memory allocated for csa_offload_ind for the failure
cases.
CRs-Fixed: 2263376
Change-Id: I6e25500c0e3a0cc2fa71601d935ec9bbe866dc2b
In wma_is_ccmp_pn_replay_attack peer is used without taking the ref
count and thus this can lead to peer used after free.
Fix this by taking ref of peer before using the peer in
wma_is_ccmp_pn_replay_attack and release ref once access is done.
Change-Id: Iaa5936a1c7f6f8667a68fcb646eaec4cb3aa5469
CRs-Fixed: 2264434
Change "qcacld-3.0: Introduce mac_handle_t" introduced a modern
name for what was previously called the tHalHandle. Transition
wlan_hdd_p2p to use the new naming.
Change-Id: I93514340fcfcf136e6e635aa142209f7cf35a68f
CRs-Fixed: 2266176
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the mac cfg folder.
Change-Id: Ia8a644bc80356cf1dcf7f688d7758902d38af57a
CRs-Fixed: 2266149
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the sap folder.
Change-Id: I17482713977012d13e0fdb99b67e3f5f4a33efe9
CRs-Fixed: 2266146
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the sme folder.
Change-Id: Ib47c297fb19c350f6ccb7d2c433ebb0eac36b2c4
CRs-Fixed: 2263024
Make sure to follow AP for NDI self peer creation so that self peer
creation and deletion can be symmetric.
Change-Id: Ie7f9c7b5500540c824a75758337967f8d4f6e692
CRs-Fixed: 2261713
Fix memory leak in function lim_send_sme_ndp_add_sta_rsp
where memoery for new peer indication for NDP is allocated
but not freed after use.
Change-Id: If5e2df154f5aab8cec21a54dd62a1c1af43e075a
CRs-Fixed: 2261712
Create NDI vdev after adapter is added to back of hdd adapter list,
so that vdev create completion callback can identify right adapter
and set corresponding completion variable.
Change-Id: If72f779fabc15a9c29f7d94bffa041f7d42db1f4
CRs-Fixed: 2252030
Currently in sme_qos_internal_release_req() and
sme_qos_process_disconnect_ev() the calls to sme_ps_uapsd_disable()
are passing a tpAniSirGlobal instead of a mac_handle_t. Change these
calls to pass the correct parameter.
Change-Id: I93784796753422988a40c4f0f51bdac92b603a43
CRs-Fixed: 2265633
When STA's join req times out on current BSS, SME issues next BSS
internally without checking HW mode for new channel.
For example, STA tries to connect SSID="abc",
BSSID="a1:a2:a3:a4:a5:a6", channel=36 and lets say it fails. It
should try few more times to same BSSID and after that it will try
next bss. Lets say next BSS it found has, SSID="abc",
BSSID="b1:b2:b3:b4:b5:b6", channel=1 then it needs to check whether
hardware mode change is required for channel=1. If driver fails in
checking hardware mode then following check will prevent the bad
situation.
CRs-Fixed: 2242562
Change-Id: Ie31ac5b8b90c6e63122148647ad333fccfbf9dbf
