Add dot11mode related cfg items in mlme cfg, and replace
old WNI dot11 modes with new MLME DOT11 mode enums
Change-Id: I6e866959f440ae781432c8aaa724b229c0874856
CRs-Fixed: 2362540
As part of ini convergence, enabled_11d and enabled_11h inis are
moved to converged framework but these inis are not removed from
legacy initialization path which is overwritting these values
to constant values and thus these inis are not taking effect.
Morever in the converged code also these inis are getting
initialized with default values instead of the values given
from ini file.
To address this issue, remove the legacy initialization of these
inis and in the converged ini path initialize these values with
the values configured in the ini files.
Change-id: I3d02c0d543fd561f1fd948b5c2850a509b1104e7
CRs-fixed: 2371528
Update qcacld driver to move IBSS INI params to converged CFG
component and cleanup HDD ini entriesi
Change-Id: Id8e4c0505113e556a8d64915a648f17fc5c0daf5
CRs-fixed: 2358493
Add two new WCNSS_qcom.ini values:
"roam_score_delta" - Factor by which the new roaming candidate
ap score should be greater than the score of the current
connected AP.
"roam_score_deltabitmap" - Roam triggers for which
roam_score_delta needs to be applied on the roam score of the
candidate AP.
Populate these two values to wlan_mlme_scoring_cfg from cfg
component in mlme_init_scoring_cfg. The values are sent to
firmware over the WMI TLV WMI_ROAM_AP_PROFILE in the below code
flow:
csr_update_score_params()->__lim_process_roam_scan_offload_req()
->wma_process_roaming_config()->wma_roam_scan_offload_ap_profile
Change-Id: I64f2a2328e485418547dae937c657f85225f1457
CRs-Fixed: 2367910
Add the following new WCNSS_qcom.ini value:
"prefer_roam_score_for_candidate_selection" - choose to sort the
candidates on roam score or preferred AP list send in the BTM
request frame by AP.
When this ini is set, host driver will
modify btm_offload_config bit 7 which will be read by firmware
to get this ini value.
“roam_candidate_validity_timer” - roam cache entries validity
timer. The candidates in the roam cache are valid only for this
time value. This value is sent to firmware over the wmi command
on the structure wmi_roam_offload_tlv_param
"btm_disassoc_timer_threshold" - Disassociation timer threshold
to wait after which the full scan for roaming can be started
after the AP has sent the disassoc imminent
Change-Id: I3ba5ba2182b1b6d722d9c315757332a1b3e62521
CRs-Fixed: 2369018
Add new WCNSS_qcom.ini value:
"prefer_btm_query" - Set this flag to enable the firmware to
send btm query for neighbor list. If this flag is not set,
the firmware will fallback to current mechanism of sending
11k neighbor report request instead of btm query.
When this prefer_btm_query is set, host driver will modify
btm_offload_config bit 8 which will be read by firmware to
get this ini value.
Change-Id: Id424c0da7207b0185cee67172782ef5c1d9fd131
CRs-Fixed: 2369000
Add new ini item "bss_load_sample_time" to send the monitor
time window for which the beacons are to be sampled to collect
the bss load information.
Also add changes to send bss load trigger parameters only during
RSO start during initial connection
Change-Id: I61d1f3745b56199838fc886f1ed3a05786653501
CRs-Fixed: 2372147
Introduce the following new WCNSS_qcom.ini values:
"enable_bss_load_roam_trigger"
"bss_load_threshold"
Send these values over the new wmi command,
WMI_ROAM_BSS_LOAD_CONFIG_CMDID if "enable_bss_load_roam_trigger"
is set to true.
This wmi command will be sent to firmware as part of the RSO
start or update config.
Change-Id: Ib2e21904bc7b8d87e5f51824d2694b90a3ac53f2
CRs-Fixed: 2367770
Currently, the support for beacon reception stats is only dependent on
the FW.
Add an ini so that the user can also have a control over the stats
Change-Id: I4a1e654b9d1598836378def494b37a997904d77a
CRs-Fixed: 2366473
WNI_CFG_WPS_UUID should be refactored and adopted by the mlme
component.
Move the cfg item to cfg_mlme_wps_params.h
Change-Id: I79db155ad16998e9d7a7e20c01efbcba1681d61e
CRs-Fixed: 2366599
Add basic infra to move the following Powersave related
ini to MLME component:
CFG_ENABLE_IMPS CFG_ENABLE_PS
CFG_AUTO_PS_ENABLE_TIMER CFG_ICMP_DISABLE_PS
CFG_BMPS_MINIMUM_LI CFG_BMPS_MAXIMUM_LI
CFG_DTIM_SELECTION_DIVERSITY
This change brings in mlme_init changes, mlme_public_struct.h changes
and cfg_mlme file changes for power save parameters.
Also remove the ini CFG_ICMP_DISABLE_PS_NAME as it is not used.
Change-Id: Ifd74d276b12acc8cd9740c25ee3ca261ed7d0143
CRs-Fixed: 2356897
It use default value instead of user setting when parse INI
"gNeighborScanChanList".
Change-Id: I99ccede8b68eefbfef96718fa4432c1824cdcf7f
CRs-Fixed: 2363952
Add the following WLM and RRM ini configs to MLME
cfg:
CFG_LATENCY_ENABLE
CFG_LATENCY_LEVEL
CFG_LATENCY_FLAGS_NORMAL
CFG_LATENCY_FLAGS_MOD
CFG_LATENCY_FLAGS_LOW
CFG_LATENCY_FLAGS_ULTLOW
CFG_RRM_ENABLE
CFG_RRM_MEAS_RAND_INTVL
CFG_RM_CAPABILITY
Change-Id: I714aca1e9bc6d3c330934753364d7f58d93a28d7
CRs-Fixed: 2353103
Replace legacy string in vdevmgr with ext string.
Also adds new compile CMN_VDEV_MLME_CMPT_ENABLE macro
for VDEV MLME component.
Change-Id: I40ce0c2ee4d653d2f4ce68093e8ad1b2c78bece8
CRs-Fixed: 2361525
Add the following WLAN_REG ini configs and FE_BEAMFORM
cfg items to MLME cfg:
1. WNI_CFG_11D_ENABLED
2. WNI_CFG_11H_ENABLED
3. WNI_CFG_TX_BF_CAP
4. WNI_CFG_AS_CAP
5. WNI_CFG_DISABLE_LDPC_WITH_TXBF_AP
Introduce the basic infra APIs related to these configs
from mlme.
In csr_roam_open_session, lim_populate_vht_mcs_set,
lim_sta_send_add_bss, populate_dot11f_tdls_ht_vht_cap,
populate_dot11f_vht_caps and sme_update_nss, local structure
is updated instead of mlme global structure for vht caps and
thus the mlme vht caps contains only the default values.
Fix this by updating mlme vht caps in mlme_update_vht_cap.
Change-Id: I1a948d7a44ad2bcc7f711c46b278971d7e4026e7
CRs-Fixed: 2354562
Add power items related CFG items in new file,
and store the respective inis in MLME component
Change-Id: Iac183da52495aca07c6270edeb9f383ab49c1ff5
CRs-Fixed: 2341900
The second part of LFR INIs are defined dynamically in legacy codes.
Refines these INIs and APIs based on new cfg component.
Change-Id: I89869c50952bf2fe403079299b3902fc53c11d61
CRs-Fixed: 2346784
Based on new cfg component, refactor CFG_TX_POWER_CTRL_NAME and clean
up related legacy codes.
Change-Id: I6dd317d5065c4111b71a9fe94d9b9af1f7d3d664
CRs-Fixed: 2355918
Based on new cfg component, refactor INI CFG_OVERRIDE_HT40_20_24GHZ_NAME
and remove legacy codes.
Change-Id: I5b4ed96a4930a9358bd93ee809bf5cddb2787fb4
CRs-Fixed: 2354476
Cleanup multiple HT related CFG/INI Items which are already moved to the
MLME component.
Also move gShortSlotTimeEnabled INI from HDD to MLME component
Change-Id: Ie8c19f508401d4d72990f35ea5dcc18d45f0f16b
CRs-Fixed: 2354687
Refactor ini items gSapForce11NFor11AC and gGoForce11NFor11AC
into new mlme component.
Change-Id: I85e2f7f9ae14a23c322572290b095aae0f29b0ec
CRs-Fixed: 2354940
Add the following WMM config ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_NAME
2. CFG_QOS_WMM_BURST_SIZE_DEFN_NAME
3. CFG_QOS_WMM_TS_INFO_ACK_POLICY_NAME
4. CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I149971768a7193099926e2778f093dcd073f0461
CRs-Fixed: 2327692
Refactor HE cap cfg items to new mlme component using
updated cfg architecture.
Change-Id: Ib983d3fc983dfffd2eee7efd1a4e3681d26d84a6
CRs-Fixed: 2351420
Store the ini and dynamic configurations in the
respective vdev's mlme priv obj.
Change-Id: Ib7a90937799a188dd729c91e7ee248d3287951c5
CRs-Fixed: 2349201
Define two different mlme priv obj structures
based upon the flag CONFIG_VDEV_SM, for the
support of dynamic nss, chains update.
Change-Id: I00f39eb82973da86233ddfc8bdcc94b6ca8a439a
CRs-Fixed: 2349200
Add prefix NSS_CHAINS to band info to remove duplicate band
info in driver, and minor code cleanup.
Change-Id: I3a8446af6b6c272cfcb19583540e2384f64e3a1a
CRs-Fixed: 2347624
Populate the ini and dynamic params from the mlme
component and store them to the respective
vdev component in mlme priv obj during vdev create.
Change-Id: Ic80526e51ba97c24b5340843fc97406a6ba4c7ef
CRs-Fixed: 2347504
Add the following HT Caps related INI/CFG items to MLME component.
gShortPreamble, CFG_HT_AMPDU_PARAMS, CFG_EXT_HT_CAP_INFO,
CFG_HT_INFO_FIELD, gEnableAMPDUPS and gMaxAmsduNum.
Change-Id: I019961016a2f0e39c7c62066c04788d3bd3d37e7
CRs-Fixed: 2318579
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I1f8e6f0fa1ff15eda36a20ee06772c4a1ddd9ca8
CRs-Fixed: 2327690
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ibaf06ba2df07a4805d31a4748809c44d143dd12e
CRs-Fixed: 2327689
Add the following WMM AC VI ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme
Change-Id: I320f49b216659937dc7f708fdbb7849ae415e249
CRs-Fixed: 2327687
Correct the configuration check to enable/disable the Tx SU
beamformee setting in 20MHz mode operation.
Change-Id: I958d5319acf98931187304f2c6fe2a9aff5991b7
CRs-Fixed: 2343849
