Add support to read link layer stats via debugfs. This change set
will issue get_req and store the received stats response is debugfs
entry.
Change-Id: If3af9f0a37283583ff011e35c7275a329a6e175d
CRs-Fixed: 2018087
If tx frame is ICMP packet, disable bmps for N seconds to avoid
latency of waking up from bmps.
Change-Id: I91f7748bfca81524637e0e4cc39ace5abf53f7dc
CRs-Fixed: 2044602
The HIF portion of Unit-Test suspend has been refactored. Update HDD to
use the updated Unit-Test Suspend APIs.
Change-Id: Id10f6f5811e836844980b929f2747b1238bcf95d
CRs-Fixed: 2055332
As part of driver init, the version string gets printed. To help in
debugging, also print a timestamp from when the driver was compiled.
Change-Id: Icf064af6a0d84434d239b54603092bf2276df596
CRs-Fixed: 2059303
Add FEATURE_TSO flag in Kbuild to enable the
TSO feature for Lithium based chipsets
Change-Id: Ie26b2b9a191828b3ce833000a7abbb09dd492713
CRs-Fixed: 2042950
1. Add an extra parameter pdev id to
qdf_trace signatures to avoid compilation break.
2. This variable allows to collect records per pdev
for Lithium based chipsets.
3. Set this variable to a default value QDF_TRACE_DEFAULT_PDEV_ID
for older chipsets.
Change-Id: I2f4c2e3525ac0d1d53f1af3db7e43acadf6ab835
CRs-Fixed: 2049412
Currently, the CONFIG_WLAN_POWER_DEBUGFS and CONFIG_WLAN_DEBUGFS
are not enabled for statically loaded driver.
This results in missing subsystem power stats.
The reason for that is the enabling of this macro is conditionally
done under KERNEL_BUILD=0.
This commit enables the macro to be also
conditionally done under all values of KERNEL_BUILD
Change-Id: I2824fdbb438b37ee58a95a6ea889be5e7691bef5
CRs-Fixed: 2033114
Add a 'gHwFilterMode' ini item to control the DTIM mode hardware
filter. This ini item supersedes 'g_enable_non_arp_bc_hw_filter.'
# disable feature (default)
gHwFilterMode=0
# drop all broadcast frames, except ARP
gHwFilterMode=1
# drop all multicast frames, except ICMPv6
gHwFilterMode=2
# drop all broadcast and multicast frames, except ARP and ICMPv6
gHwFilterMode=3
Change-Id: I6bc8ac7585ffd0a62ab1c57558a798df9b63f2ce
CRs-Fixed: 2040420
Record ol rx indication events in a global ol rx indication record
buffer to have history of msdus received, no. of buffers replenished,
etc. in rx indication messages.
Change-Id: I96cf27a209c81208c6f6566b5e57116b2cf233e8
CRs-Fixed: 2012485
Add PMO changes to configure and clear default packet filters
over suspend and resume.
Change-Id: I0089811ae626ff1a79c845acc997f00429ed88ed
CRs-Fixed: 2034398
We want to enable 64-bit DMA support only on a select platforms. If the
flag CONFIG_FORCE_ALLOC_FROM_DMA_ZONE is set on a platform, it indicates
that the platform supports 32-bit DMA only. We can use this flag to
enable ENABLE_DEBUG_ADDRESS_MARKING flag in the WLAN driver. This flag
ENABLE_DEBUG_ADDRESS_MARKING, when enabled, allows WLAN driver
to process DMA addresses > 32 bits.
Disable ENABLE_DEBUG_ADDRESS_MARKING when
CONFIG_FORCE_ALLOC_FROM_DMA_ZONE is set for a platform.
Change-Id: I48afcc240d21fe9486c2bdf0f572b8b8d3e3cd71
CRs-Fixed: 2052030
1. Remove unused variable of type ol_txrx_stats_req
passed through cdp_txrx_stats api to avoid
compilation break.
2. Add dp_stats file to the Kbuild. This file is
used to collect HTT Statistics for Lithium based
chipsets.
Change-Id: I0252c996d47cc866291d25f35eb9bb9e19073a8b
CRs-Fixed: 2050798
Power_management_offlaods is really a long directory name hence rename it
to pmo such that it aligns with existing naming convention. Add Kbuild
changes to support 'pmo' component compilation.
Change-Id: If0b260ee0e2d10e5a506d7c5e96e47d2f0611ead
CRs-Fixed: 2045420
Regulatory parsing code is present in file reg_db_parser.c.
Add this file to regulatory component.
Change-Id: I7fcf9db8b80fdfbef30409575cc1a63d684dded2
CRs-Fixed: 2012415
Limit the detection of non posted rx buffers from FW only to
64 bit DMA address system. For systems, where IPA has 32 bit
DMA address limitation, this debug feature should be disabled.
CRs-Fixed: 2010583
Change-Id: I9a26d0a423acedb068d99f39929029182f7c6fa1
Enable CONFIG_HALT_KMEMLEAK in Kbuild such that panic
can be trigerred on memory leak and issues are debugged
on priority.
Change-Id: Iadc0604f842c7b2d63da65054840499b23990a36
CRs-Fixed: 2030989
Add structure changes for querying WDI-stats, register the callback
functions for IPA to query WDI stats and sets the quota limit
Change-Id: I05d9d50fad735fa0a57c4de23c81461f6e12b648
CRs-Fixed: 1095710
Currently the feature flag is enabled at a wrong place since CDEFINES
will be reset later. Move it to the correct place in order to compile
the feature by default. To enable this feature, the corresponding ini
configs need to be set properly.
Change-Id: I22e3c3ac7c81c12700bfa6bb78cc84c20e3e331f
CRs-fixed: 2023358
Remove legacy policy manager code as part of policy manager moving to host
common.
Change-Id: I6cb9fe12bee3702556c9b52e7ccb7c69c762d8de
CRs-Fixed: 2009818
Change Kbuild to compile in new WIFI_POS component and
route all WIFI_POS OEM request to new component.
Change-Id: Ib0980348d6e50e27de0b5ad859ac378bf983b665
CRs-Fixed: 2003488
Add new dot11mode and update the utility functions to derive
the dot11mode based on the userspace config, INI config and
FW capability.
Change-Id: I5780120ef7bc2b78fd596e937fe14a2c8ad88348
CRs-Fixed: 1073481
Change it since WLAN_P2P_ENABLE easily confused with existed macro
WLAN_FEATURE_P2P. This is the change in Kbuild.
Change-Id: I571cb4c6e8e2b2d185811e1103a8990eb9d4b01d
CRs-Fixed: 2021997
Add support in HDD to update 11ax - High Efficiency(HE) Capabilities
received as part of the target configuration.
Add support for new WNI_CFG global config parameters to be
used for implementing 11AX standard.
Change-Id: I3f0d3af2369157c657ac59676a434dc794f84b19
CRs-Fixed: 1073481
Add support in WMA to receive and store HE capabilities coming
from extended service ready event.
Add support to receive HE capabilities, convert into OTA type of
internal host structure and pass it to the uppper layer as target
config. Add utility funciton for the conversion as well.
Change-Id: If0ceeb3db74be6cf6893b8e74c710863bab8b41b
CRs-Fixed: 1073481
Add WLAN_POLICY_MGR_ENABLE in build file to conditionally enable
Policy Manager code in host common
Change-Id: I879b6a223bed5d77d20a878667308aeb1071e609
CRs-Fixed: 2009818
Currently user space communication functions[cnss diag, PTT socket app]
in host driver uses netlink user sockets which is a security concern from
Linux Android SE policies.
Add support for to use netlink family cld80211 which uses generic
netlink sockets.
Change-Id: I4ea49ac6d7c9381212c93567fdc40f90e04dfba4
CRs-Fixed: 1112784
QCA_CONFIG_SMP should only depend on CONFIG_SMP
Remove other incorrect dependencies.
Change-Id: I6eeba9e98bd7b3cfcce8457f0385da155c6a6e71
CRs-Fixed: 2017603
qcacld-2.0 to qcacld-3.0 propagation
Some WLAN driver feature enabling macros are missing on sdxhedgehog
platform, enabling them in Kbuild file to make sure the driver's
behaviors are the same as on mdm9x50
Change-Id: I018e98dea60c7c73ad119394a1016ef592c6552a
CRs-Fixed: 2014423
1. The paths for driver to get ini and fw files
are incorrect for QCA SDIO chip on Dual-WiFi
platforms, with wrong prefix or no prefix.
Correct prefix for ini file, from '<mod_name>'
to '<chip_name>/'; add prefix '<chip_name>/'
for fw files.
2. For QCA9377, there is a special cnss API for getting
fw names, it's cnss_get_qca9377_fw_files().
Use the right cnss API to get fw files for QCA9377
Change-Id: Ia7616153b6823e9550703e649c7fc21ab306ca07
CRs-Fixed: 2008217
wlan_cfg.h header file was not getting included due to error in the
wlan_cfg path.
Change-Id: I97d706f1c35475e4da4be3d181f2d6c215b531cc
CRs-Fixed: 2005582
Make changes to support compilation for the files that have
been renamed. Rename the files from wlan_serialization_legacy_mcl_api
to wlan_serialization_legacy_api to keep it more appropriate.
Change-Id: Id219a9f3e00bef0ed85408539b33d54462bf91b5
CRs-Fixed: 2012863
There is new legacy serialization MCL file added to serialization
module which needs to be compiled for MCL platform and needed to
add reference in SME module.
CRs-Fixed: 2005532
Change-Id: Id946a62f6e0dec4531deccc83dae6373d396a91a
-Initialize and free os private structure in pdev object
-Move vendor command definition to common project.
Change-Id: I9b8501d042afe1c967bfbfef81c01c0382a67531
CRs-Fixed: 2002991
Add WMA changes for WMI (ext)service ready event common parsing
to populate common psoc object with service ready data such that
new components can get service ready data from common psoc object.
Change-Id: I5bc42a7534aebd6877fc02378b2e698d2d021383
CRs-Fixed: 1110768
This reverts the commit for enabling lock stats feature
with CONFIG_SLUB_DEBUG_ON.
Change-Id: I80df6bb1661c851bda4c0a31c87475d1f2751640
CRs-Fixed: 2009630
From qcacld30-hl_git.bb/qcacld30-ll_git.bb, qca-wifi-host-cmn
is in the same directory with qcacld-3.0(<src_root>/wlan/),
so correct the path for it in Kbuild.
Change-Id: I5c552d2f89cd7b6832c37d6785cfc5a0d00c795d
CRs-Fixed: 2005755
Define and enable the compile time flags for the
UMAC convergence serialization component
Change-Id: Idf4eede72f7316e9f5c14dd61a98ef7045096316
CRs-Fixed: 2000032
Object manager provides reference count infrastructure for all 4
common objects: psoc, pdev, vdev and peer. Reference count APIs
provide protection from use after free scenarios by making sure
reference counted object is not freed prematurely while its still
in use. Reference count usage requires certain set of disciplines
from components for example:
1) A component 'C' is responsible for all its reference count
2) A component 'B' can't release reference count of a common object
taken by component 'A'
3) A component can't release a reference count which it has not
taken.
Enable reference count debug infrastructure such that wrong APIs
usage can be detected and fixed properly.
Change-Id: I7a5b92fe00a060eee15b74572d2624197b331894
CRs-Fixed: 2006322
Currently kernel LRO API is only provided in version 4.4. There will
be compilation error if kernel version < 4.4. Add fix to disable
LRO feature when linux kernel version < 4.4.
Change-Id: I69198e55bb3c4ee7c5844e2b7b55e12cb8075d7c
CRs-Fixed: 1112463
1. sdio related source files are not included due to
CONFIG_HIF_SDIO is not enabled.
Enabled CONFIG_HIF_SDIO if CONFIG_ROME_IF is sdio.
2. Paramters for nl_srv_init/nl_srv_exit are incorrect
if MULTI_IF_NAME is defined.
Correct the parameters, to align with the prototype.
Change-Id: I4e395e07b12e3b1904cabfa4a40fa10845d8e735
CRs-Fixed: 2004368
When CONFIG_WLAN_FEATURE_DSRC is enabled the resulting build fails
because there is no rule to make wma_ocb.o. The issue is that there is
a typo in the rule, so fix the rule.
Change-Id: I1b724736fcac175b9bf83e4a98878e1333a54b57
CRs-Fixed: 2002874
After control path scheduler componentization cds_mq header and
source files are not needed hence delete obsolete cds_mq.h and
cds_mq.c files.
Change-Id: I9cef1086e805d0e5ea7b377d0a2de3512b452572
CRs-Fixed: 2000240
Enable FEATURE_METERING for SDM660 and SDM630 in Kbuild
to get any IPA stats by Wlan driver.
CRs-Fixed: 1115310
Change-Id: I44ad270735c91b9642612307d223da7f5e25fcf0
Turn on debugfs support only if CONFIG_DEBUG_FS is enabled in kernel
configuration.
Change-Id: I0b63bff056123fe29b0880bbe98da7a5c204fae7
CRs-Fixed: 1083744
Use inline functions to access mgmt_txrx southbound API's.
This will remove the need to invoke these directly from the
structures.
Change-Id: I50f71261618fd6812265738597bd6f2968cef692
CRs-Fixed: 1110551
Enable the compiler's -Wmissing-prototypes switch. This will help
catch two types of issues:
1) Implementations which do not include their header file which
prevents the compiler from verifying that the signature of the
implementation matches the signature of the prototype.
2) Functions which should be static but which are missing the 'static'
keyword.
Change-Id: I4f8e45b40e57bdf7bec40e3d72cc48e7bfe15b7b
CRs-Fixed: 1074336
Added CONFIG_LITHIUM checks to selectively compile Hal and DP
files only for lithium based chipsets. Also added
QCA_WIFI_QCA6290 define for conditional compilation in
ce_main.c
Change-Id: I9e9aac0070aaf4b8292e9f3a6b0ceb8738d0e696
CRs-Fixed: 1103135
MCL driver interactions with mgmt txrx component in init deinit
of driver. Also, changes to make legacy path to go through mgmt
txrx component for both tx and rx mgmt. frames.
Change-Id: Icf368358fef3b9204bed5195a2502b0ea5f052d8
CRs-Fixed: 1103247
Enable UMAC converged southbound interface by default by removing
CONFIG_WLAN_CONVERGED_INTERFACE in Kbuild and WLAN_CONVERGED_INTERFACE
based API definitions in wma_main.c.
Change-Id: I3b849192b667e8c2f9fb628355c80b3d817f741a
CRs-Fixed: 1103247
Implementation of Host driver support to collect chip power stats
from firmware and display the stats in
"adb shell cat /sys/kernel/debug/wlan0/power_stats".
Change-Id: I19595ebf5a6870a0ee4d3cc2ff47d18eb24d213c
CRs-Fixed: 1045057
Legacy protocol engine already has a module name 'sch' rename
control path scheduler from sch to scheduler to avoid naming
conflict with protocol sch.
Change-Id: I94ce9aa5037aa75319aaad2287116462444c03f4
CRs-Fixed: 1105115
Attach southbound interface. Each individual component is supposed
to define tx_ops and rx_ops function to attach with southbound.
Change-Id: I622a53ab76bc3bab3774e90569af53ad49b95053
CRs-Fixed: 1096553
Enable converged control path scheduler for cld driver
and disable legacy cds MC thread scheduler.
Change-Id: I11ecc6a5ee930a1039ed3460b3a3d4e5f7b75ac6
CRs-Fixed: 1095867
Propagation from qcacld-2.0 to qcacld-3.0.
If the module name is changed to something other than wlan in
Makefile or Kbuild, then MULTI_IF_NAME is defined to be the module name.
When MULTI_IF_NAME is defined, the names for the config files, log files,
and firmware files are prepended or appended with MULTI_IF_NAME. This
prevents file name collisions allowing multiple instances of this driver
to be loaded with different module names.
Change-Id: Id880c5fe423eb0b2a2c01677d8fa7c4a784c74df
CRs-Fixed: 946520
Change to enable per virtual device transmit descriptors
in Kbuild for lithium.
Change-Id: I2824de2daa5bce7b0ab6993fb7f85ea01ac0849d
CRs-Fixed: 1089685
CONFIG_PLD_PCIE_INIT indicates that pcie initialization
and io remap have allready been done by the platform driver,
and should not be re-done by the wlan driver.
This is to facilitate shared controll between the MHI & wlan
drivers.
Change-Id: I97704076d1efe2a8d980c8f659f05367ca82a5f6
CRs-Fixed: 1097375
This is a qcacld-2.0 to qcacld-3.0 propagation.
Enable the compiler's -Wheader-guard switch. This will help
catch mismatches between #ifndef and #define lines in header guard.
Change-Id: Ic05a829eadbf974598370c494a5cff10201ec600
CRs-Fixed: 1091052
Propagation from qcacld-2.0
Change hard coded RX wakelock duration into an ini configuration item.
Only aquire the wakelock for unicast traffic, and if the configured
wakelock item is greater than 0.
Change-Id: I46b946ddfeae510a5446ff4ab012c09e4964a50c
CRs-Fixed: 1068594
Enable unit-test suspend/resume ioctls for all SLUB builds, for a
better out-of-the-box debug experience.
Change-Id: Iab6662a39125371ab700c8482e06cd98a3d171a5
CRs-Fixed: 1098034
Define basic dispatcher framework for init/deinit. Each individual
component is supposed to define its init/deinit primitives and replace
dummy place holder primitives.
Change-Id: I35140ea7af03ce568e1732435458caf78ab28996
CRs-Fixed: 1095741
For Napier end-to-end bringup:
-- Disable PKTLOG, this is not ready on the new HW design
-- Enable timer based polling on DP UMAC rings
-- Modify cdp_soc_attach() to attach to Lithium DP
Change-Id: I096644887848dd8eae75bf4c497acc0b19f89833
CRs-Fixed: 1074199
qcacld-2.0 to qcacld-3.0 propagation
Add sanity check for tx desc to avoid crash if firmware report the invalid
msdu id to the host.
Change-Id: I5a339e81f3de882b5f7cc42b0628ea4738141c58
CRs-Fixed: 1071620
QCA6290 is part of the Lithium chipset family. Without
support for lithium, compiling in the register deffinitions
for QCA6290 does not make sense.
Change-Id: Id251a931287d2662e0b910da299c12e9d45b719c
Codeswap feature is introduced for a WLAN chipset which is already
cancelled. It is no longer used in host driver. Remove the feature
to avoid any confusion for future development.
Change-Id: I70ae291ded2d2e290408e2f5b177e872f1f3d7e8
CRs-fixed: 1082183
This is a qcacld-2.0 to qcacld-3.0 propagation.
pr_debug() should not appear by default in kernel log (kmsg).
DEBUG is a kernel macro, since host driver is using the same name macro,
pr_debug log statements are appearing in kmsg.
Fix this by moving the code under DEBUG to WLAN_DEBUG and
remove DEBUG macro from Kbuild.
Change-Id: I5bb385f91f9b6ba15629a5878625fefc21d4a7e1
CRs-Fixed: 1003261
Currently we are using different flags to enable compilation of pld_usb.c
and one to enable/disable PLD USB stub functions. Use the same flag for
both cases - CONFIG_PLD_USB_CNSS
Change-Id: Icc89405d785f3fc0ebc4a97d234013ac86ebd068
CRs-Fixed: 1076326
Add changes to parse DISA parameters received from
user space and pass them to firmware for firmware
to encrypt data and send back to driver. Also, add
changes to print encrypted data received from firmware.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1064970
Currently the Green AP feature is only enabled on mobile router
platforms. Enable it on the msmcobalt platform as well.
Change-Id: Ib5000b2201cc2c7bd88e3d322b186afcdb0a72e3
CRs-Fixed: 1072412
Host should not honor any vendor pktlog disable command
if NO vendor pktlog enable command is sent previously.
Currently, vendor sends pktlog disable command without sending enable
command during init and because pktlog is enabled in ini by default,
Host sends the pktlog disable command to firmware which is not as expected.
To fix this, host uses reserved flag in wifi_start_log to distinguish
vendor command from iwpriv or pktlog conf tool command and vendor disable
pktlog command will be sent to firmware only when vendor pktlog enable
commands is sent previously.
Moreover, pktlog INI enable by default and Pktlog buffer size are now
controlled using a macro FEATURE_PKTLOG depending on build variant.
For production/user build, pktlog is default disable and buffer size is
1 MB, whereas for dev build, pktlog is default enable and buffer size is
10 MB.
Change-Id: If64cd522e91cbe9a6d94d8626eb758282fcfd1bd
CRs-Fixed: 1072584
qcacld-2.0 to qcacld-3.0 propagation
Currently DSRC feature is compiled for all the
targets even if DSRC is not required.
Fix to protect DSRC changes with DSRC enabled feature.
Change-Id: I2e6f975366e1de8aa8afb818a073e1591f76d7fb
CRs-Fixed: 1053362
Add throughput policy handler which triggers irq/CPU mananagement
functions as required.
Adapt NAPI enablement code to recent changes to the init sequence.
Add to the new files to build.
Change-Id: I8c16667a08982e419c2f2152cf31afcd3a535eb4
CRs-Fixed: 1064917
Compile in runtime pm code for mcl. Maintain compilation
of runtime pm for future product lines and discrete chipsets.
Change-Id: Ieb34a64bf4624e959ae64aafa8ab03085aad9164
CRs-Fixed: 1044155
Turn off opportunistic key caching (OKC) in firmware based on
"OkcEnabled" parameter in WCNSS_qcom_cfg.ini.
It is enabled by default and can be turned off with value 0.
Remove FEATURE_WLAN_OKC compilation option because OKC is always
compiled in for cld3.0. Remove underlying empty routine
cb_notify_set_okc_feature_enabled().
CRs-Fixed: 1057181
Change-Id: I174e860abef0532d62517635fe56927d8c3c9fd3
APPS suspend/resume support is ready. By default disable WLAN suspend
resume test framework and enable it in engineering builds on need basis.
Change-Id: If1e23ed41987a1f8b40cfae6504f6b69f8a06932
CRs-Fixed: 1055093
WLAN suspend/resume feature has tight dependency on APPS platform
suspend/resume support. On new targets APPS suspend/resume is not
supported until target is feature complete. In absence of APPS
suspend/resume support testing WLAN offload features become
difficult. Add unit test framework to test WLAN suspend/resume
features using private IOCTL command by simulating APPS
suspend/resume behaviour.
Trigger WLAN suspend:
iwpriv wlan0 wlan_suspend 0 0
To resume WLAN run a ping test from access point side and very 1st
ping request unicast packet should trigger wake up.
If FW is not waking up APPS then use below command to do a manual
wake up:
Trigger WLAN resume:
iwpriv wlan0 wlan_resume 0 0
This unit test framework is only for SNOC.
Change-Id: I177a0047f460aa2a305a9e4e46fbfaa94a81dced
CRs-Fixed: 1042205
Kbuild contains several macros in CDEFINES that are no longer used
Removed these macros from Kbuild file
Change-Id: Ib34ada0b2a07b9d428e9b29ad13ce5fe0302d461
CRs-Fixed: 1023225
Currently in HDD the WLAN_FEATURE_LPSS code is distributed amongst
multiple source files. In order to be more aligned with established
practices refactor most of the feature code into a feature-specific
file .
Change-Id: I7c743f32fd1455fc253a00d69bfc9abb7f6743da
CRs-Fixed: 1018553
Add new files for supporting NAN data path feature.
Propagation from qcacld-2.0 to qcacld-3.0
CRs-Fixed: 962367
Change-Id: If12d15789659d04559a9d65d6b7016d4cc595fcf
Disable FEATURE_MEMDUMP in Kbuild.
FEATURE_MEMDUMP should be redesigned appropriately for
cld-3.0. Disable this feature until implementation is
complete.
Change-Id: I3190414ff32d8a75b07c2c311e257f4d388ef26d
CRs-Fixed: 1026747
Add ini parameter and feature flag for
DPTRACE to enable/disable as per requirement.
Change-Id: I80db65adb7b8e82d5ea75cceac742fd229d7a2b5
CRs-Fixed: 1008087
This enables the tracking of posted rx ring buffers. With this we can
identify if host/fw is wrong when we hit below issue:
"wlan: [0:E :QDF] rx hash: htt_rx_hash_list_lookup: no entry found for"
<physical address>
Change-Id: Ib973a2e2a69e881beddea23cdc1d2d994eeb1e12
CRs-Fixed: 864569
Add BMI and firmware download support for sdio bus platform.
Refactor fw and bmi download routines to get rid of compile
time bus specific macro.
Refactor allocation and free routines for high latency bus.
CRs-Fixed: 969334
Change-Id: I2c217891d0ca4b503e7388b3ebe2f787e8325af5
Update TSF feature for vendor command QCA_NL80211_VENDOR_SUBCMD_TSF
to support TSF operations.
Change-Id: I89abf14b9b7d8ee8fe1c12f7684c87e4dee9bfb0
CRs-fixed: 997799
Clean up bmi_2 related code. These code are hardware/platform
specific which is no longer supported.
CRs-Fixed: 1001252
Change-Id: I783f4a411044268d24ba660ce9f10dabe0cce8bf
qcacld-2.0 to qcacld-3.0 propagation
Get tsf from fw. Provide ioctl interface cap_tsf/get_tsf.
Driver issue wmi cmd to fw to realize capture/get.
It can be used in station and softap mode. For sta, getting
tsf from connected ap. For softap, it will generate tsf by-
self
Change-Id: I00d30882bce2f49ee3de3fa189e094c04c0d9943
CRs-Fixed: 817527
PLD stands for platform driver. It is a interface between CLD and
CNSS/ICNSS. It hides the CNSS/ICNSS APIs from CLD and provides a set
of common APIs.
Other modules should include pld_common.h if they want to call PLD
APIs.
CRs-Fixed: 979275
Change-Id: I3571fc70f502dc367c65f13b412cd5d37ee41d3c
Enable "tx flow control v2" for SNOC.
Acked-by: Orhan K AKYILDIZ <oka@qca.qualcomm.com>
Change-Id: Ifaca9c97d78e6b09876e3d0a7a9e85d763e67e09
CRs-Fixed: 999422
In msm-4.4 kernel, CONFIG_ARCH_MSM is replaced by CONFIG_ARCH_QCOM,
hence add it to the list so that MSM_PLATFORM can be correctly enabled
for the driver.
Also filter function works in a exclusive way that will causes problem
when several flags are defined at the same time. Fix it so that multiple
flags can be defined.
Change-Id: Ic5445951516c8d2cd79a71aefebd42b3f178c727
CRs-fixed: 1005069
Enable the packet tracker feature for non performance builds
by enabling the macro QCA_PKT_PROTO_TRACE and set the
default packet tracker log level to dump the DHCP, EAPOL
and management packet details. The necessary log level can
be modified using the ini 'gEnableDebugLog' entry either at
compile time or at run time using the IOCTL 'setDbgLvl'.
The logs are dumped using the same IOCTL 'setDbgLvl'.
e.g.,
To enable all the packet trace features
- iwpriv wlan0 setDbgLvl 0x0f
To dump the packet trace
- iwpriv wlan0 setDbgLvl 9999
Change-Id: I4fe82e0091517f0614baedf620976dd37b94a974
CRs-Fixed: 998642
Kernel 4.4 is using CONFIG_ARCH_MSMCOBALT instead of CONFIG_ARCH_MSM.
Enable MSM_PLATFORM flag when CONFIG_ARCH_MSMCOBALT is defined.
CRs-Fixed: 998798
Change-Id: I718560c7925376b1dd3b00bd56724ca67eda92b7
In HDD, hdd_wlan_startup which is called by probe is beast of a
function to maintain. Over time it has grown to such an extent
that it is almost 800 lines of code with in a single function.
Divide the beast into logical smaller functions.
Create separate function for Netlink service init and exit.
Change-Id: I3271784f06ad2a365c4b0ce767a2ba6df67f0b4d
CRs-fixed: 996332
Fix IPA WDI 1.0 update for overwrite of previous commit and use
only QCA_WIFI_3_0 build flag for qcacld-3.0.
Change-Id: I3bff4a4e10102e97aeb57fb0f67d48933e0bae9b
CRs-fixed: 994144
Enable compile time featurization support for both LFR2.0
and LFR3.0 using WLAN_FEATURE_HOST_ROAM and
WLAN_FEATURE_ROAM_OFFLOAD respectively
CRs-Fixed: 978905
Change-Id: Ib5976cd0cd5a6e117a1334bfc73a043e36e25f77
Move the scanning related code which is pertinent to roaming
into a separate file so that any future maintenace would be
easy across different projects
CRs-Fixed: 978905
Change-Id: Ia8c81726eb843d0a5aa89affa89d84d77994932e
Move the preauthentication related code in the CSR module
into a separate file so that it is easy to maintain
across different projects
CRs-Fixed: 978905
Change-Id: I56e8441f08dec180f080c305ba5c6541302f107c
Move all the roaming related timers into a separate file
for easy maintenance and management across different projects
CRs-Fixed: 978905
Change-Id: I3bdbf13d9f962af36d74837bf50be7c9a93e824e
Move the routines which help in building and sending the roaming
related management frames into a separate file for easy
maintenance across different projects
CRs-Fixed: 978905
Change-Id: If8e5cbdabef7747e58359961c3b13c577eb3b777
Move all the reassociation related utilities to a separate
file for easy maintenance across different projects
CRs-Fixed: 978905
Change-Id: I86809ac48659dc91222624fec616bab6533d75dd
Separate the host based roaming MLM code into a separate file
to maintain it easily across different projects
CRs-Fixed: 978905
Change-Id: I1fad25ffbaa49bb2380c32ca9612ad46e3bca65c
Move all the pre-authentication related code in LIM to
a separate file so that it is feature specific and easy to
maintain across different projects
CRs-Fixed: 978905
Change-Id: I3ca443139b974b25be8121fd6df040d858693708
Currently HIF_PCI and snoc are not supported at the same time.
Bus should be set to snoc when CONFIG_ICNSS is defined.
Change-Id: I900cb70136a9be5406df05d06419e57ca0fa71be
CRs-Fixed: 989686
At present and going forward ESE and ESE_UPLOAD will be the
de-facto approach supporting ESE. Hence there is no need of two compile macros
FEATURE_WLAN_ESE and FEATURE_WLAN_ESE_UPLOAD.
Instead Remove FEATURE_WLAN_ESE_UPLOAD and Keep only FEATURE_WLAN_ESE.
Change-Id: If1a04e95211a0d639db7b60a57a6d5f215d26f4e
CRs-Fixed: 950762
Enable feature flag FEATURE_WLAN_MCC_TO_SCC_SWITCH in the Kbuild to
make use of the MCC to SCC switch feature. The resulting errors in
compilation are fixed along with some enhancement in the debug logs
in this feature path
Change-Id: I0ddb2f371c28ade6d8fc9ea12ba104a99394827f
CRs-Fixed: 986079
Add support for setting channel width for CSA and modify the
SAP DFS channel width fallback algoritham to support DFS for
80+80Mhz and 160Mhz bandwidth. Also, compile out channel matrix
restriction from channel selection process after radar
indication is received for newer platforms and only compile
for older platforms
Change-Id: I771fc162b18aa1e485c513046a265b2d94612972
CRs-Fixed: 964262
Currently some features depending on platform driver are only enabled
when CNSS driver is enabled. Enable these features as well when ICNSS
driver is enabled.
Change-Id: I9c5296e888f81fcd40101f87d289f60f40f299e7
CRs-fixed: 979523
Re-arrange core regulatory code between HDD and CDS
layers. Move the OS dependent code to HDD.
Change-Id: I8ac26a48d0e8d613b2f6c23fd764e5cf94365c39
CRs-Fixed: 856727
Conditional compilation option WLAN_FEATURE_VOWIFI_11R is always
defined in cld3.0 and underlying code is permanent in the driver.
Hence, remove #ifdef WLAN_FEATURE_VOWIFI_11R check from WMA source
code.
Remove -DWLAN_FEATURE_VOWIFI_11R compilation flag from Kbuild.
CRs-Fixed: 960105
Change-Id: Idbcea2faf9aa31ef62920ef322d6de61378198a6
Remove #ifdef WLAN_FEATURE_VOWIFI from host driver source code.
It has alwasys been defined in Kbuild and underlying features
will be permanent in cld3.0. Those features are 11r radio
resource measurement, beacon report, link report, neighbor
report and power constraint.
Please note that WLAN_FEATURE_VOWIFI_11R is used for different
purpose and it is not removed in this change.
CRs-Fixed: 958729
Change-Id: Icd80e9cce08c4662e86ccda94491c1fc22c5756d
Change the data path and external modules to use the new
converged common data path APIs.
Change-Id: Ifb48178efd012b6ad9ea6f6d5230d0a809922b1c
CRs-Fixed: 994638
Need to support SNOC and PCI dynamically.
Core BSP code is responsible for SNOC firmware
loading and crash dumps.
Change-Id: Ia16076809f2b74be6f32ad5015b79b1fe2c13ca3
CRs-Fixed: 986480
With common code is separated into qca-wifi-host-cmn project, add
Kbuild instructions to build along with qca-wifi-host-cmn project.
Change-Id: Ie28d348ed6874e5b2ee0d1fb8d9451513db9771a
CRs-fixed: 978124
Conditional compilation option of #ifdef WLAN_FEATURE_VOWIFI_11R_DEBUG
is used to enable certain roaming logs. It has always been defined,
thus these logs are enabled by default.
Remove it from all the code to always enable those logs.
CRs-Fixed: 936683
Change-Id: I23bba225ce69311d416e6d847c398840919c43aa
The condition #ifdef WLAN_FEATURE_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Similarly code under WLAN_FEATURE_NEIGHBOR_ROAMING is permanent
part of the driver.
Remove FEATURE_WLAN_LFR and WLAN_FEATURE_NEIGHBOR_ROAMING compiler
flags from Kbuild script.
All the instances of above flags are presumed to be removed
from the driver source code prior to this change.
Remove WLAN_FEATURE_NEIGHBOR_ROAMING_DEBUG compiler flag from
Kbuild and csr_neighbor_roam.c and permanently enable roaming
debug logs.
CRs-Fixed: 936683
Change-Id: Iec251c2a4439ab3d492d9700d242aad401a0dbe0
For iHelium, the flag AR900B is defined in the firmware however
it is not defined on the host. This is causing a mismatch in the
statistics structure between the host and the firmware.
Temporarily enable this flag on the host. Eventually, this flag will
be replaced by a iHelium specific flag on both the host and the firmware
CRs-Fixed: 964909
Change-Id: I1a13db22448a099ea51602108eb5626e878e2c2e
FEATURE_STATICALLY_ADD_11P_CHANNELS was a temporary solution for
builds that were not defining DSRC channels in db.txt. That
restriction no more holds true. Also correct the list of DSRC
channels in function cds_is_dsrc_channel.
Change-Id: I1146ec9702a8eec801b635a276e981962dd42817
CRs-Fixed: 856727
- Athdiag debug support is enabled for PCIe devices but disabled
for integrated SNOC devices like iHelium.
- Enable athdiag debug feature support for SNOC devices as well.
Change-Id: I73ce74286bf59147e45868e424de4ee1bc858ca0
CRs-Fixed: 948890
Remove per vdev tx descriptor pool feature as
it is applicable only for High Latency.
CRs-Fixed: 916724
Change-Id: I22ab3dd187518790694356bdde8475b194845bf5
a) Enabled flow control
b) Add small helper functions to avoid duplication of
code.
c) Fix thermal mitigation unpause issue with flow control.
CRs-Fixed: 916716
Change-Id: Ic02b66d1c23768a1c71dc08ed50dcedd02b647ce
- In current qcacld-3.0 driver full rx reorder offload is dependent
on HIF_PCI feature flag.
- HIF_PCI feature flag is compiled out for SNOC devices like adrastea.
- Because of RX reorder dependency on HIF_PCI host data path is broken
on adrastea.
- Enable rx reorder offload for SNOC devices(adrastea).
Change-Id: I445afa57fb5fc45363ca644a35ae15e4af5bf94a
CRs-Fixed: 939890
The SRRI/DRRI can be read from DDR instead of doing an
actual hardware read. This mechanism is compiled out by
default.
Change-Id: I8fc6c8817b5958f3d00b47ccd3dba36b354097e8
CRs-Fixed: 932344
cds_get_bin.h and cds_get_bin.c were derived from qcacld-2.0
vos_get_bin.h and vos_get_bin.c. These files got their names
since at one time they housed the wrappers used to retrieve
binary files nv.bin, cfg.dat, and firmware. But over time the
functionality to actually retrieve binary files (get_bin) has
been removed, and almost all that is left is concurrency
management functions. So, moving the .[ch] functionality to
the right files.
CRs-Fixed: 932777
Change-Id: I4a26c304cc6b6224d0839c365e4006fd32270961
qcacld-3.0: Initial snapshot of ihelium wlan driver
to match code-scanned SU Release 5.0.0.139. This is
open-source version of wlan for next Android release.
Change-Id: Icf598ca97da74f84bea607e4e902d1889806f507
