When auth timeout failure happens, as part of clean up process
vdev down is sent to FW but the vdev up happens only after the
assoc response is received. Sending the vdev down to without
vdev up leads to negative vdev up count value in the FW.
Check if vdev is up before sending the vdev down.
Change-Id: Ia5394390d376c638b3976d446a6ecc98d0584159
CRs-Fixed: 1051760
Sessionize VHT Capability by updating the session
entry at join request or start bss and read the same
capablities at LIM instead of reading from global VHT
CFG items.
Following CFG items are taken care as part of this change.
WNI_CFG_VHT_SU_BEAMFORMER_CAP,
WNI_CFG_VHT_SU_BEAMFORMEE_CAP,
WNI_CFG_VHT_CSN_BEAMFORMEE_ANT_SUPPORTED,
WNI_CFG_VHT_MU_BEAMFORMER_CAP,
WNI_CFG_VHT_MU_BEAMFORMEE_CAP
Change-Id: I7c33de1180416db0027b4690170060549847dd9a
CRs-Fixed: 1029145
Sessionize VHT Capability by updating the session
entry at join request or start bss and read the same
capablities at LIM instead of reading from global VHT
CFG items .
Change-Id: Idef009d4c76cfc6939359dc09379fc1f0d820589
CRs-Fixed: 1029145
HDD validate context check is at wrong place in __wlan_hdd_cfg80211_scan()
which is leading to invalid pointer access and page fault. Move HDD
validate context check at begining of scan API to avoid accessing any
context pointer which is getting freed during SSR/driver unload.
Change-Id: Id91c9ea54c513ecc25bdf42904a5bb5cde2e91ce
CRs-Fixed: 1025498
Apps crash observed due to nested spin lock calls from
the soft irq context.
Change the tdls spin lock calls from qdf_spin_lock() to
qdf_spin_lock_bh(). This will avoid nested spin lock
calls.
Change-Id: I9c3d32f2385bec35ea7d9773ed4c36968a79a28b
CRs-Fixed: 1053041
Add support for 5/10 MHz channel width for STA and SAP role. To
enable/disable feature, following ini parameter will be used:
* gSub20ChannelWidth=0: indicates do not use Sub 20 MHz bandwidth
this is also the default value.
* gSub20ChannelWidth=1: Bring up SAP/STA in 5 MHz bandwidth
* gSub20ChannelWidth=2: Bring up SAP/STA in 10 MHz bandwidth
Change-Id: Ic6d534dc1eae60fcd2fb7533c934b9ea28e6dd78
CRs-Fixed: 1013211
Currently the HDD code uses a variety of logging APIs. In
qcacld-3.0 HDD should converge on a unified set of logging APIs.
Update wlan_hdd_debugfs.c to use the unified set of APIs.
Change-Id: I3981157eb8e285bc7259279fccd582a896eab36b
CRs-Fixed: 937649
Currently the burst_dur private ioctl enforces a maximum limit of
8192. Per firmware team define the max as 102400 (for 100 ms or a
normal beacon interval).
Change-Id: I3f01b06ad047f7b972e649c798e4a507fcc55755
CRs-Fixed: 1050791
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_memdump.c to use the unified set of APIs.
Change-Id: I6026bed45fe24ca0c2c0cfb62a97f0dc613bd1ea
CRs-Fixed: 937665
qcacld-2.0 to qcacld-3.0 propagation
Add NAN API wrapper function definitions and also fix compilation
failure when NAN data path feature is disabled.
Change-Id: Ib4a3133568eee0c2257c65bb0a8905c44048f0c2
CRs-Fixed: 1049546
qcacld-2.0 to qcacld-3.0 propagation
Take action to delete peer in NDP_END Indication, rather than
NDP_END Response event from firmware. Earlier, device initiating
NDP_END will only get NDP_END_Response event from firmware, but
that behavior is changed now and both self and peer device will get
NDP_END_indication with peer map for ndp end.
Change-Id: I7316cc3864052eef4c7bbe9bbac01f0333909c59
CRs-Fixed: 962367
caller and callee of wlan_hdd_cfg80211_connect_start API are
interpreting BSSID and BSSID hint differently due to incorrect order.
This bug was introduced through change id:
I94c5a3dbbd831f6c82080dcc91008f9e3e6829f7
Fix the order of arguments.
Change-Id: I17850cc0d681664631b68a5193f936b678bff31a
CRs-fixed: 1051160
Pointer pointing to address which used to be start of the
mac header is no longer true after pulling the head of the frame.
Due to above situation, it causes dangling pointer situation. Fix
the error by re-assigning the correct address.
Change-Id: I71693f86b1971e3c6d1ddd9c377ef888122c2bb8
CRs-Fixed: 1048951
In current driver, there is already an API called cds_allow_concurrency
which is functionally similar to csr_isconcurrentsession_valid. Remove old
API csr_isconcurrentsession_valid to have single API.
Change-Id: If81900af5cb7291917fe915b44af5cf763f16d46
CRs-Fixed: 1047054
In current code base, some of files are not meeting linux coding
standard.
Fix them to satisfy coding standard.
Change-Id: Iedb1ec9ad7c75cb9f7ef97b19f14dca3b5eb9b6c
CRs-Fixed: 1051212
Currently the WLAN ini file contains a "gNthBeaconFilter" setting that
was only applicable for a prior version of WLAN HW/SW. Remove this
obsolete setting to avoid confusion.
Change-Id: I53ffc9f25ecd60e04eaf86029eeaa8763f8707fd
CRs-Fixed: 1050635
In case there are multiple copy engines (for example in ihelium), the
peer map and unmap handlers may be executed on different CPUs
concurrently. These functions access global peer data structures and are
not SMP-safe.
Re-factor the existing code to make it SMP-safe.
Change-Id: I3f52e17a80d7eae8d4c2fb88da7f57f64455b031
CRs-Fixed: 1050653
Place a big spinlock on the rxhash so that only one
activity happens on it at a time.
Change-Id: Id1a020f508b6232d401d44da1cd0b9592288c81c
CRs-Fixed: 1048807
Assign the list to null inside the spinlock such that no one else
can access the free nodes. Then free the list outside of the spinlock.
This spinlock was causing a watchdog bark.
Change-Id: I9a34c8c3ea8451004814bcabfcbb81744d71ec45
CRs-Fixed: 1052458
Bus link voting needs to vote for the link up before
voting for the link down. The sap module voted for
link down before link up, overriding the default
settings of an always on bus. This confused the suspend
resume system making it send WOW_IFACE_PAUSE_ENABLED
when the bus interface didn't have a "paused" mode.
Sap module should vote for link up when a sta is added
and vote link down when removed.
Change-Id: I5c042a3a4b3d4e6528fdc7edc9e0413c0f811192
CRs-Fixed: 1049469
ADD HTC level wakeup, when interface is not paused,
we use HTC level suspend/resume message.
Change-Id: I1d09de68675f1ec5cafe1c9da1c7a7837f16ca2e
CRs-Fixed: 1051045
Fix the compilation error when the feature flag WLAN_OPEN_P2P_INTERFACE
is disabled.
Change-Id: I661f31f0f5c06afbaab789836078822c7af08efe
CRs-Fixed: 1042901
Add support for pre CAC on SAP for the user requested channel.
The reason for the requirement is to have SAP operations without
interruptions due to CAC. After starting SAP on the 2.4GHz
channel, the driver will start a pre CAC on the 5GHz DFS channel
requested. If no radar is detected, SAP is expected to switch
from the 2.4GHz channel to the DFS channel mentioned in the pre
CAC request. If radar is detected SAP will continue to operate on
the 2.4GHz channel. To provide the pre CAC channel to the driver,
vendor commands/attributes are used .
Change-Id: I4cf4bb5a861eea05f37fafb3bf35d327f5377aab
CRs-Fixed: 1045242
Check STAID value returned by hdd_get_transmit_sta_id against MAX_STA,
before accessing array based on STAID index.
Change-Id: I4ac88e3d95f425ddc3a8690ef5333e0a4e67d328
CRs-Fixed: 1050083
TDLS init/exit functions have some dead code and it causes
memory leak for each wlan on/off operation.
Remove the dead code from TDLS init/exit functions.
Change-Id: Ie43057d94a27c34e970293b5cbc75edb6c0f6ca8
CRs-Fixed: 1050841
TDLS peer idle timers will be created only for implicit and external
mode operations. But tdls exit operation try to stop these timers
without checking the state of the timers and causes assert in
timer module.
Add changes to validate timer state before calls timer stop
function.
Change-Id: I6d41bbd99b49326b5a6eb8350f67923626d42400
CRs-Fixed: 1050836
qcacld-2.0 to qcacld-3.0 propagation
While RTT ranging happens, userspace application initiates FTM
request via host to FW. After sending the FTM request, host
might go to sleep mode sometimes so FW will not be able to send
the OEM response event resulting in poor ranging results.
This change registers OEM response event as WOW wakeable so FW
wakes up host whenever it receives OEM response which helps OEM
response to reach userspace application on time for better
ranging results.
Git-commit: 4de9b661e45a0bde4dfefc760edf03d1b8f4dd68
Change-Id: I71b77cfa09c5039b487e9a93490837a084314fb3
CRs-Fixed: 1018887
Bus bandwidth request timer samples the traffic on STA and
P2P client adapters to trigger bandwidth request and also enable
tcp delayed ack trigger to cnss daemon.
CRs-Fixed: 1050190
Change-Id: Iecd8a3f3762aa4c7743fb6ea22a8216fdac2ac8c
Currently MCL driver loads/unloads when user tries to
Switch On/Off from GUI and load process is different
for the static and dynamic built driver.
With this feature, we shall have a uniform behavior for
static and dynamic driver, where the driver will be
loaded once and unload never.
Mode switch for different modes is supported via sysfs entries.
Change-Id: Ica49dd289d7f1f0ad0c56af76bd7bcfeca433a2e
CRs-Fixed: 1049218
As a part of the dynamic mode changes, the CDS modules shall be
closed/re-opened several times. Depending on the STATE of the driver,
the modules have to be initialized.
This function shall be invoked when driver state
is OPENED(DRIVER_MODULES_OPENED) and has to be enabled.
Change-Id: Ife4a4d8121bdc5ef9ed92aa9aea1d92ee4554732
CRs-Fixed: 1045626
Update default INI config value for rm_capability to indicate
support for LCI capability.
Change-Id: Id5303ffc4004e58f6302f8692a15b8040231c3a4
CRs-Fixed: 1049333
Remove the usage of typedef for oem data request and oem
data response data structure.
Change-Id: I94f05833baa9b6baaf2272f63a33236437a96bbf
CRs-Fixed: 1038872
Remove oem data rsp passing over multiple layers.
This change set sends the OEM data response directly to
SME from WMA instead of going through LIM/MLM.
Change-Id: I3cff10ff7bdbcee39b39bd9ba03b5eff8444b017
CRs-Fixed: 1038872
Remove oem data request passing over multiple layers.
This change set sends the OEM data request directly from
SME to WMA instead of going through LIM/MLM.
Change-Id: I151fa771544e9f74b1b69b18d689176752760621
CRs-Fixed: 1038872
Remove handling of deprecated OEM related events since FW and
userspace application will use only TLV based messaging.
Support to handle following events are removed,
WMI_OEM_CAPABILITY_EVENTID
WMI_OEM_MEASUREMENT_REPORT_EVENTID
WMI_OEM_ERROR_REPORT_EVENTID
Change-Id: Ia194f559acde6689a50c56b52078b7dc967c6159
CRs-Fixed: 1038872
qcacld-2.0 to qcacld-3.0 propagation
Fix uninitialized stack use in csrRoamReadTSF by initializing
variable of struct type tCsrNeighborRoamBSSInfo to zero.
Git-commit: d39cf92e69222e03f89238313f5b8c100ecd4ecc
Change-Id: I4211b41b5e30d414e45691a5bab4048587cc8499
CRs-Fixed: 1018486
