Commit Graph

1817 Commits

Author SHA1 Message Date
Steve Wise
5f0f66b022 RDMA/cxgb3: Fix QP capabilities
- Set the stag0 and fastreg capability bits only for kernel qps.
- QP_PRIV flag is no longer used, so don't set it.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04 11:04:42 -07:00
Linus Torvalds
8be1a6d6c7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files
  mlx4_core: Add VLAN tag field to WQE control segment struct
  RDMA/nes: CM connection setup/teardown rework
  IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUG
  IPoIB/cm: Connected mode is no longer EXPERIMENTAL
  RDMA/ucm: BKL is not needed for ib_ucm_open()
  RDMA/ucma: BKL is not needed for ucma_open()
2008-07-26 20:40:36 -07:00
Roland Dreier
cc9969c967 Merge branches 'bkl-removal', 'ipoib', 'mlx4' and 'nes' into for-linus 2008-07-26 13:59:47 -07:00
FUJITA Tomonori
8d8bb39b9e dma-mapping: add the device argument to dma_mapping_error()
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:03 -07:00
Jack Morgenstein
51a379d0c8 mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files
Update existing Mellanox copyright lines to 2008, and add such lines
to files where they are missing.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-25 10:32:52 -07:00
Faisal Latif
6492cdf3a2 RDMA/nes: CM connection setup/teardown rework
Major rework of CM connection setup/teardown.  We had a number of issues
with MPI applications not starting/terminating properly over time.
With these changes we were able to run longer on larger clusters.

* Remove memory allocation from nes_connect() and nes_cm_connect().
* Fix mini_cm_dec_refcnt_listen() when destroying listener.
* Remove unnecessary code from schedule_nes_timer() and nes_cm_timer_tick().
* Functionalize mini_cm_recv_pkt() and process_packet().
* Clean up cm_node->ref_count usage.
* Reuse skbs if available.

Signed-off-by: Faisal Latif <flatif@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:50:45 -07:00
Roland Dreier
9905922446 IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUG
The help text for INFINIBAND_IPOIB_DEBUG refers to "ipoib_debugfs,"
which no longer exists.  Correct this to talk about the files under
debugfs that are really created.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:37:25 -07:00
Roland Dreier
99c3a5a9e3 IPoIB/cm: Connected mode is no longer EXPERIMENTAL
Connected mode is now tested and used by lots of people.  No need to
hide it under CONFIG_EXPERIMENTAL.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:37:25 -07:00
Roland Dreier
5ba18b186c RDMA/ucm: BKL is not needed for ib_ucm_open()
Remove explicit cycle_kernel_lock() call and document why the code is safe.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:36:59 -07:00
Roland Dreier
f7a6117ee5 RDMA/ucma: BKL is not needed for ucma_open()
Remove explicit lock_kernel() calls and document why the code is safe.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24 20:36:59 -07:00
Linus Torvalds
5c402355ad Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  MAINTAINERS: Remove Glenn Streiff from NetEffect entry
  mlx4_core: Improve error message when not enough UAR pages are available
  IB/mlx4: Add support for memory management extensions and local DMA L_Key
  IB/mthca: Keep free count for MTT buddy allocator
  mlx4_core: Keep free count for MTT buddy allocator
  mlx4_code: Add missing FW status return code
  IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg
  mlx4_core: Add module parameter to enable QoS support
  RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes
  IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures
  IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()
  IB/ehca: Release mutex in error path of alloc_small_queue_page()
  IB/ehca: Use default value for Local CA ACK Delay if FW returns 0
  IB/ehca: Filter PATH_MIG events if QP was never armed
  IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event
  RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event
  RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
2008-07-24 12:56:07 -07:00
Roland Dreier
2cc177364e Merge branches 'bkl-removal', 'cma', 'ehca', 'for-2.6.27', 'mlx4', 'mthca' and 'nes' into for-linus 2008-07-24 08:38:47 -07:00
Linus Torvalds
26dcce0fab Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23 18:37:44 -07:00
Roland Dreier
95d04f0735 IB/mlx4: Add support for memory management extensions and local DMA L_Key
Add support for the following operations to mlx4 when device firmware
supports them:

 - Send with invalidate and local invalidate send queue work requests;
 - Allocate/free fast register MRs;
 - Allocate/free fast register MR page lists;
 - Fast register MR send queue work requests;
 - Local DMA L_Key.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-23 08:12:26 -07:00
Roland Dreier
e8bb4beb2b IB/mthca: Keep free count for MTT buddy allocator
MTT entries are allocated with a buddy allocator, which just keeps
bitmaps for each level of the buddy table.  However, all free space
starts out at the highest order, and small allocations start scanning
from the lowest order.  When the lowest order tables have no free
space, this can lead to scanning potentially millions of bits before
finding a free entry at a higher order.

We can avoid this by just keeping a count of how many free entries
each order has, and skipping the bitmap scan when an order is
completely empty.  This provides a nice performance boost for a
negligible increase in memory usage.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:20:05 -07:00
Roland Dreier
47b374752a IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg
Make the struct name consistent with other WQE segment struct types
defined in <linux/mlx4/qp.h>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:19:39 -07:00
Dotan Barak
1ca8d15619 RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes
Remove IB_ACCESS_LOCAL_WRITE from qp.qp_access_flags because this
attribute is only used to set remote permissions.

Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:18:34 -07:00
Or Gerlitz
01b3fc8b15 IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures
Print the return code of ib_sa_path_rec_get() if it fails to help
debug errors.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:18:34 -07:00
Ralph Campbell
64b784b583 IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()
If update_sm_ah() fails, it leaves the port's sm_ah as NULL.  Then if
the device or module is removed, ib_sa_remove_one() will dereference a
NULL pointer when it calls kref_put().  Fix this by testing if sm_ah
is NULL before dropping the reference.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:18:33 -07:00
Julia Lawall
1a867c33bb IB/ehca: Release mutex in error path of alloc_small_queue_page()
The pd->lock mutex is released on a successful return, so it should be
released on an error return as well.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:18:10 -07:00
Joachim Fenkes
593e4d4a05 IB/ehca: Use default value for Local CA ACK Delay if FW returns 0
Some firmware versions report a Local CA ACK Delay of 0.  In that
case, return a more sensible default value of 12 (-> 16 msec) instead.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:18:08 -07:00
Joachim Fenkes
5b673b71c8 IB/ehca: Filter PATH_MIG events if QP was never armed
Certain firmware versions sometimes cause spurious PATH_MIG events to
occur during QP creation.  Filter these events by making sure PATH_MIG
events are only handed down when they actually make sense (i.e. when
the QP has been armed at least once).

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:18:07 -07:00
Or Gerlitz
2f5de15128 IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event
Enhance iser to act upon notification on network stack changes that
make its RDMA connection unaligned with the link used by the stack for
the <src,dst> IPs used to establish the connection.

When RDMA_CM_EVENT_ADDR_CHANGE arrives, just disconnect the
connection, assuming that the user space iscsid daemon will reconnect,
and the new connection will be aligned with the IP stack.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:16:21 -07:00
Amir Vadai
38ca83a588 RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event
Consumers that want to re-use their QPs in new connections need to
know when the QP has exited the timewait state.  Report the timewait
event through the rdma_cm.

Signed-off-by: Amir Vadai <amirv@mellanox.co.il>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:14:23 -07:00
Or Gerlitz
dd5bdff83b RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
Add an RDMA_CM_EVENT_ADDR_CHANGE event can be used by rdma-cm
consumers that wish to have their RDMA sessions always use the same
links (eg <hca/port>) as the IP stack does.  In the current code, this
does not happen when bonding is used and fail-over happened but the IB
link used by an already existing session is operating fine.

Use the netevent notification for sensing that a change has happened
in the IP stack, then scan the rdma-cm ID list to see if there is an
ID that is "misaligned" with respect to the IP stack, and deliver
RDMA_CM_EVENT_ADDR_CHANGE for this ID.  The consumer can act on the
event or just ignore it.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22 14:14:22 -07:00
Greg Kroah-Hartman
110cf374a8 infiniband: make cm_device use a struct device and not a kobject.
This object really should be a struct device, or at least contain a
pointer to a struct device, as it is trying to create a separate device
tree outside of the main device tree.  This patch fixes this problem.

It is needed for the class core rework that is being done in the driver
core.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:49 -07:00
Greg Kroah-Hartman
d4c4196f24 infiniband: rename "device" to "ib_device" in cm_device
This pointer really is a struct ib_device, not a struct device, so name
it properly to help prevent confusion.

This makes the followon patch in this series much smaller and easier to
understand as well.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:49 -07:00
Greg Kroah-Hartman
c76d3d28c3 device create: infiniband: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:43 -07:00
Ingo Molnar
eb6a12c242 Merge branch 'linus' into cpus4096-for-linus
Conflicts:

	net/sunrpc/svc.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-21 17:19:50 +02:00
Ingo Molnar
bb2c018b09 Merge branch 'linus' into cpus4096
Conflicts:

	drivers/acpi/processor_throttling.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:00:54 +02:00
David S. Miller
49997d7515 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c
2008-07-18 02:39:39 -07:00
Linus Torvalds
89a93f2f48 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits)
  [SCSI] scsi_dh: fix kconfig related build errors
  [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of
  [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
  [SCSI] make struct scsi_{host,target}_type static
  [SCSI] fix locking in host use of blk_plug_device()
  [SCSI] zfcp: Cleanup external header file
  [SCSI] zfcp: Cleanup code in zfcp_erp.c
  [SCSI] zfcp: zfcp_fsf cleanup.
  [SCSI] zfcp: consolidate sysfs things into one file.
  [SCSI] zfcp: Cleanup of code in zfcp_aux.c
  [SCSI] zfcp: Cleanup of code in zfcp_scsi.c
  [SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
  [SCSI] zfcp: Small QDIO cleanups
  [SCSI] zfcp: Adapter reopen for large number of unsolicited status
  [SCSI] zfcp: Fix error checking for ELS ADISC requests
  [SCSI] zfcp: wait until adapter is finished with ERP during auto-port
  [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
  [SCSI] sg: Add target reset support
  [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC
  [SCSI] sd: Move scsi_disk() accessor function to sd.h
  ...
2008-07-15 18:58:04 -07:00
Ingo Molnar
82638844d9 Merge branch 'linus' into cpus4096
Conflicts:

	arch/x86/xen/smp.c
	kernel/sched_rt.c
	net/iucv/iucv.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 00:29:07 +02:00
Ingo Molnar
6c9fcaf2ee Merge branch 'core/rcu' into core/rcu-for-linus 2008-07-15 21:10:12 +02:00
David S. Miller
b9e4085768 netdev: Do not use TX lock to protect address lists.
Now that we have a specific lock to protect the network
device unicast and multicast lists, remove extraneous
grabs of the TX lock in cases where the code only needs
address list protection.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 00:15:08 -07:00
David S. Miller
e308a5d806 netdev: Add netdev->addr_list_lock protection.
Add netif_addr_{lock,unlock}{,_bh}() helpers.

Use them to protect operations that operate on or read
the network device unicast and multicast address lists.

Also use them in cases where the code simply wants to
block calls into the driver's ->set_rx_mode() and
->set_multicast_list() methods.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15 00:13:44 -07:00
Eli Cohen
f507d28bff IB/mlx4: Use kzalloc() for new QPs so flags are initialized to 0
Current code uses kmalloc() and then just does a bitwise OR operation on
qp->flags in create_qp_common(), which means that qp->flags may
potentially have some unintended bits set.  This patch uses kzalloc()
and avoids further explicit clearing of structure members, which also
shrinks the code:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-65 (-65)
function                                     old     new   delta
create_qp_common                            2024    1959     -65

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:53 -07:00
Or Gerlitz
de910bd921 RDMA/cma: Simplify locking needed for serialization of callbacks
The RDMA CM has some logic in place to make sure that callbacks on a
given CM ID are delivered to the consumer in a serialized manner.
Specifically it has code to protect against a device removal racing
with a running callback function.

This patch simplifies this logic by using a mutex per ID instead of a
wait queue and atomic variable.  This means that cma_disable_remove()
now is more properly named to cma_disable_callback(), and
cma_enable_remove() can now be removed because it just would become a
trivial wrapper around mutex_unlock().

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:53 -07:00
Or Gerlitz
64c5e613b9 RDMA/addr: Keep pointer to netdevice in struct rdma_dev_addr
Keep a pointer to the local (src) netdevice in struct rdma_dev_addr,
and copy it in as part of rdma_copy_addr().  Use rdma_translate_ip()
in cma_new_conn_id() to reduce some code duplication and also make
sure the src_dev member gets set.

In a high-availability configuration the netdevice pointer can be used
by the RDMA CM to align RDMA sessions to use the same links as the IP
stack does under fail-over and route change cases.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:53 -07:00
Steve Wise
4ab928f692 RDMA/cxgb3: Fixes for zero STag
Handling the zero STag in receive work request requires some extra
logic in the driver:

 - Only set the QP_PRIV bit for kernel mode QPs.

- Add a zero STag build function for recv wrs. The uP needs a PBL
  allocated and passed down in the recv WR so it can construct a HW
  PBL for the zero STag S/G entries.  Note: we need to place a few
  restrictions on zero STag usage because of this:

  1) all SGEs in a recv WR must either be zero STag or not.  No mixing.

  2) an individual SGE length cannot exceed 128MB for a zero-stag SGE.
     This should be OK since it's not really practical to allocate
     such a large chunk of pinned contiguous DMA mapped memory.

- Add an optimized non-zero-STag recv wr format for kernel users.
  This is needed to optimize both zero and non-zero STag cracking in
  the recv path for kernel users.

 - Remove the iwch_ prefix from the static build functions.

 - Bump required FW version.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
2008-07-14 23:48:53 -07:00
Steve Wise
96f15c0353 RDMA/core: Add local DMA L_Key support
- Change the IB_DEVICE_ZERO_STAG flag to the transport-neutral name
  IB_DEVICE_LOCAL_DMA_LKEY, which is used by iWARP RNICs to indicate 0
  STag support and IB HCAs to indicate reserved L_Key support.

- Add a u32 local_dma_lkey member to struct ib_device.  Drivers fill
  this in with the appropriate local DMA L_Key (if they support it).

- Fix up the drivers using this flag.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:53 -07:00
Roland Dreier
aed012279d IB/mthca: Fix check of max_send_sge for special QPs
The MLX transport requires two extra gather entries for sends (one for
the header and one for the checksum at the end, as the comment says).
However the code checked that max_recv_sge was not too big, instead of
checking max_send_sge as it should have.  Fix the code to check the
correct condition.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:52 -07:00
Roland Dreier
c036925ac0 IB/mthca: Use round_jiffies() for catastrophic error polling timer
Exactly when the catastrophic error polling timer function runs is not
important, so use round_jiffies() to save unnecessary wakeups.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:52 -07:00
Roland Dreier
4522e08ced IB/mthca: Remove "stop" flag for catastrophic error polling timer
Since we use del_timer_sync() anyway, there's no need for an
additional flag to tell the timer not to rearm.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:52 -07:00
Eli Cohen
bc3a290b51 IPoIB: Double default RX/TX ring sizes
Increase IPoIB ring sizes to twice their original sizes (RX: 128->256,
TX: 64->128) to act as a shock absorber for high traffic peaks.  With
the current settings, we have seen cases that there are many calls to
netif_stop_queue(), which causes degradation in throughput.  Also,
larger receive buffer sizes help IPoIB in CM mode to avoid experiencing
RNR NAK conditions due to insufficient receive buffers at the SRQ.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:52 -07:00
Eli Cohen
e112373fd6 IPoIB/cm: Reduce connected mode TX object size
Since IPoIB connected mode does not NETIF_F_SG, we only have one DMA
mapping per send, so we don't need a mapping[] array.  Define a new
struct with a single u64 mapping member and use it for the CM tx_ring.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:52 -07:00
Ralph Campbell
df8666198d IB/ipath: Use IEEE OUI for vendor_id reported by ibv_query_device()
The IB spe. for SubnGet(NodeInfo) and query HCA says that the vendor
ID field should be the IEEE OUI assigned to the vendor.  The ipath
driver was returning the PCI vendor ID instead.  This will affect
applications which call ibv_query_device().  The old value was
0x001fc1 or 0x001077, the new value is 0x001175.

The vendor ID doesn't appear to be exported via /sys so that should
reduce possible compatibility issues.  I'm only aware of Open MPI as a
major application which depends on this change, and they have made
necessary adjustments.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:52 -07:00
Eli Cohen
bd3606715e IPoIB: Use dev_set_mtu() to change mtu
When the driver sets the MTU of the net device outside of its
change_mtu method, it should make use of dev_set_mtu() instead of
directly setting the mtu field of struct netdevice.  Otherwise
functions registered to be called upon MTU change will not get called
(this is done through call_netdevice_notifiers() in dev_set_mtu()).

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:51 -07:00
Eli Cohen
c8c2afe360 IPoIB: Use rtnl lock/unlock when changing device flags
Use of this lock is required to synchronize changes to the netdvice's
data structs.  Also move the call to ipoib_flush_paths() after the
modification of the netdevice flags in set_mode().

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:51 -07:00
Roland Dreier
9eae554c17 IPoIB: Get rid of ipoib_mcast_detach() wrapper
ipoib_mcast_detach() does nothing except call ib_detach_mcast(), so just
use the core API in the one place that does a multicast group detach.

add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-105 (-105)
function                                     old     new   delta
ipoib_mcast_leave                            357     319     -38
ipoib_mcast_detach                            67       -     -67

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14 23:48:50 -07:00