In order to support variable lpi offsets from different chipsets
read the lpi offset values of gpio groups from device tree. Any
target which uses LPI has to define this gpio offset table
in device tree.
Change-Id: I3bd54017e4571deb9a189cfd6903698887a6413a
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add new kconfig to control compilation of new soundwire driver
Change-Id: I6eb8b30de9f6dc2ffa152b6dfffbc2b02d0a990c
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add support for audio drivers compilation on kernel-4.14.
Change-Id: Id7689cef4ae7cdb6711fed386d2a6b0d427b3fc3
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
New soundwire master driver to support multi master
for Talos/vipertooth.
Change-Id: I2616b940339e8f3d8d120e6705247d7bd1656bac
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
soundwire bus driver changes to support new soundwire
master driver for Talos/vipertooth.
Change-Id: I70e52a72edd80abc72ccb99b29b1a642debec257
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Add support to listen for DC detection event.
Shutdown WSA on receiving DC detection event.
CRs-Fixed: 2244131
Change-Id: Ifecab8bb9862976a647a161bad4c202b6e6459c7
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Use CONFIG_ARCH_SM6150 for Talos to enable
proper compilation.
Change-Id: I14e06122116c431bf4b99da3a061d165f68e0d4f
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Add MSMSTEPPE in the makefile rules to enable
compilation for SDM640.
Change-Id: I36437404d98229c8b292fd63304498122d8c8687
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Update all audio drivers to use updated chipset name in
files, functions, architecture specific configurations
and the device tree compatible strings.
Change-Id: I507948866213ddb8806edea71a57c1f29ce7e71b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update all audio drivers to use updated chipset name
in architecture specific configurations and the device
tree compatible strings.
Change-Id: Ib1abe643c6914c1b0b57ef110c7b60e23e356d97
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Use pm_runtime_put_sync_suspend to tear down soundwire master.
It makes sure the process is synced with the autosuspend call
flow.
Change-Id: Ib4feccd905bcbf046e58bd5eaffde40ee391feda
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Update module symbol folder from PRODUCT_OUT to OUT.
Change-Id: I4542c3d2b5e9e39b69f15954ef425c1915a58456
Signed-off-by: Meng Wang <mwang@codeaurora.org>
For remove module(rmmod), update drivers
to cleanup resources and allow insert module
again without any issue.
Change-Id: Iddc6e5e11d986359afd3100bf3c5eab70cb1c1eb
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Signed-off-by: Meng Wang <mwang@codeaurora.org>
In SDM450, WSA reset pin is shared for both WSA left
and right speakers. When reset pin toggled, both devices
enumerate and can be filled in any order in SWRM_DEV list.
But get_logical_address loops only once for first slave
addition and fails if the device entry is present at second
in SWRM_DEV list. Update logic of get_logical_address to
loop through max devices possible.
CRs-Fixed: 2196399
Change-Id: Ie31cea5a9b22e09a3c5c01e177cd1b78e8d2f28d
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Soundwire slave logical device number is not updated properly for
all the devices. Because of this, slave devices are pointed to wrong
register regmap. Update logical device number properly for all the
slave devices.
Change-Id: Ic480585301d8e53500714bc136e23e95ac52b13c
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
update softlink for internal.h, core.h and pinctrl-utils.h for sdm855
Change-Id: I3e92e8da1ab1bbfce7fbb92c6997af22777925dc
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Update make files to extend dlkm support for qcs605
Change-Id: Icf736fb66ca12966f4c6cd72bb906eb32899868a
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Deregister lpi with audio notifier when removing driver to
avoid crash when rmmod and insmod again.
Change-Id: Ibcaf272e6405ef8403b3ac66af5572050fa1092e
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Update sizeof lpi register offset to 32 bit to
accommodate all register offset for sdm670.
Change-Id: I9a3fdb56f9faf6c0aff627cbedaa54db606d2434
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(040750bfa78 -
"Revert "ARM: dts: msm: Add DT node for aop-qmp
clock controller on SDM845 v2"")
CRs-Fixed: 2104096
Change-Id: I0927c40b3a188dbf892e7ec4c1c7810953724929
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(aed56b2df75 - "drm/msm/sde: update te vsync enable sequence change")
Change-Id: I7ed5102146986b81e5cb9ca55432360b3549b60c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
