fs/proc/proc_misc.c: In function `version_read_proc':
fs/proc/proc_misc.c:256: warning: implicit declaration of function `utsname'
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch provides process filtering feature.
The process filter allows failing only permitted processes
by /proc/<pid>/make-it-fail
Please see the example that demostrates how to inject slab allocation
failures into module init/cleanup code
in Documentation/fault-injection/fault-injection.txt
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch provides fault-injection capability for disk IO.
Boot option:
fail_make_request=<probability>,<interval>,<space>,<times>
<interval> -- specifies the interval of failures.
<probability> -- specifies how often it should fail in percent.
<space> -- specifies the size of free space where disk IO can be issued
safely in bytes.
<times> -- specifies how many times failures may happen at most.
Debugfs:
/debug/fail_make_request/interval
/debug/fail_make_request/probability
/debug/fail_make_request/specifies
/debug/fail_make_request/times
Example:
fail_make_request=10,100,0,-1
echo 1 > /sys/blocks/hda/hda1/make-it-fail
generic_make_request() on /dev/hda1 fails once per 10 times.
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace kmalloc+memset with kcalloc and simplify
Signed-off-by: Yan Burman <burman.yan@gmail.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NFS3: Calculate 'w' a bit later in nfs3svc_encode_getaclres()
This is a small performance optimization since we can return before
needing 'w'. It also saves a few bytes of .text :
Before:
text data bss dec hex filename
1632 140 0 1772 6ec fs/nfsd/nfs3acl.o
After:
text data bss dec hex filename
1624 140 0 1764 6e4 fs/nfsd/nfs3acl.o
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
NFS2: Calculate 'w' a bit later in nfsaclsvc_encode_getaclres()
This is a small performance optimization since we can return before
needing 'w'. It also saves a few bytes of .text :
Before:
text data bss dec hex filename
2406 212 0 2618 a3a fs/nfsd/nfs2acl.o
After:
text data bss dec hex filename
2400 212 0 2612 a34 fs/nfsd/nfs2acl.o
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a per pid_namespace child-reaper. This is needed so processes are reaped
within the same pid space and do not spill over to the parent pid space. Its
also needed so containers preserve existing semantic that pid == 1 would reap
orphaned children.
This is based on Eric Biederman's patch: http://lkml.org/lkml/2006/2/6/285
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rename struct pspace to struct pid_namespace for consistency with other
namespaces (uts_namespace and ipc_namespace). Also rename
include/linux/pspace.h to include/linux/pid_namespace.h and variables from
pspace to pid_ns.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rename 'struct namespace' to 'struct mnt_namespace' to avoid confusion with
other namespaces being developped for the containers : pid, uts, ipc, etc.
'namespace' variables and attributes are also renamed to 'mnt_ns'
Signed-off-by: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add an anonymous union and ((deprecated)) to catch direct usage of the
session field.
[akpm@osdl.org: fix various missed conversions]
[jdike@addtoit.com: fix UML bug]
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace occurences of task->signal->session by a new process_session() helper
routine.
It will be useful for pid namespaces to abstract the session pid number.
Signed-off-by: Cedric Le Goater <clg@fr.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This facility provides three entry points:
ilog2() Log base 2 of unsigned long
ilog2_u32() Log base 2 of u32
ilog2_u64() Log base 2 of u64
These facilities can either be used inside functions on dynamic data:
int do_something(long q)
{
...;
y = ilog2(x)
...;
}
Or can be used to statically initialise global variables with constant values:
unsigned n = ilog2(27);
When performing static initialisation, the compiler will report "error:
initializer element is not constant" if asked to take a log of zero or of
something not reducible to a constant. They treat negative numbers as
unsigned.
When not dealing with a constant, they fall back to using fls() which permits
them to use arch-specific log calculation instructions - such as BSR on
x86/x86_64 or SCAN on FRV - if available.
[akpm@osdl.org: MMC fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the xfs
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the
ecryptfs filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the cifs
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the
configfs filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the autofs4
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the autofs
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the affs
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the 9p
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ntfs
filesystem code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the nfs
server code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the nfs
client code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the isofs
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the fat
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext4
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext3
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext2
filesystem.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the proc
filesystem code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the sysfs
filesystem code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes struct file to use struct path instead of having
independent pointers to struct dentry and struct vfsmount, and converts all
users of f_{dentry,vfsmnt} in fs/ to use f_path.{dentry,mnt}.
Additionally, it adds two #define's to make the transition easier for users of
the f_dentry and f_vfsmnt.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Convert eCryptfs dentry-vfsmount pairs in dentry private data to struct
path.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Moved struct path from fs/namei.c to include/linux/namei.h. This allows many
places in the VFS, as well as any stackable filesystem to easily keep track of
dentry-vfsmount pairs.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rename Reiserfs's struct path to struct treepath to prevent name collision
between it and struct path from fs/namei.c.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace eCryptfs specific code & calls with the more generic fsstack
equivalents and remove the eCryptfs specific functions.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce several fsstack_copy_* functions which allow stackable filesystems
(such as eCryptfs and Unionfs) to easily copy over (currently only) inode
attributes. This prevents code duplication and allows for code reuse.
[akpm@osdl.org: Remove unneeded wrapper]
[bunk@stusta.de: fs/stack.c should #include <linux/fs_stack.h>]
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't leak a ->bd_part_count when the partition open fails with -ENXIO.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that the nesting in blkdev_{get,put} is simpler, adding mutex_lock_nested
is trivial.
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we open (actually blkdev_get) a partition we need to also open (get) the
whole device that holds the partition. The involves some limited recursion.
This patch tries to simplify some aspects of this.
As well as opening the whole device, we need to increment ->bd_part_count when
a partition is opened (this is used by rescan_partitions to avoid a rescan if
any partition is active, as that would be confusing).
The main change this patch makes is to move the inc/dec of bd_part_count into
blkdev_{get,put} for the whole rather than doing it in blkdev_{get,put} for
the partition.
More specifically, we introduce __blkdev_get and __blkdev_put which do exactly
what blkdev_{get,put} did, only with an extra "for_part" argument
(blkget_{get,put} then call the __ version with a '0' for the extra argument).
If for_part is 1, then the blkdev is being get(put) because a partition is
being opened(closed) for the first(last) time, and so bd_part_count should be
updated (on success). The particular advantage of pushing this function down
is that the bd_mutex lock (which is needed to update bd_part_count) is already
held at the lower level.
Note that this slightly changes the semantics of bd_part_count. Instead of
updating it whenever a partition is opened or released, it is now only updated
on the first open or last release. This is an adequate semantic as it is only
ever tested for "== 0".
Having introduced these functions we remove the current bd_part_count updates
from do_open (which is really the body of blkdev_get) and call
__blkdev_get(... 1). Similarly in blkget_put we remove the old bd_part_count
updates and call __blkget_put(..., 1). This call is moved to the end of
__blkdev_put to avoid nested locks of bd_mutex.
Finally the mutex_lock on whole->bd_mutex in do_open can be removed. It was
only really needed to protect bd_part_count, and that is now managed (and
protected) within the recursive call.
The observation that bd_part_count is central to the locking issues, and the
modifications to create __blkdev_put are from Peter Zijlstra.
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The extra call to get_gendisk is not good. It causes a ->probe and possible
module load before it is really appropriate to do this.
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use the gendisk partition number to set a lock class.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the old complex and crufty bd_mutex annotation.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
->signal->tty is protected by ->siglock, no need to take the global tty_mutex.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix the locking of signal->tty.
Use ->sighand->siglock to protect ->signal->tty; this lock is already used
by most other members of ->signal/->sighand. And unless we are 'current'
or the tasklist_lock is held we need ->siglock to access ->signal anyway.
(NOTE: sys_unshare() is broken wrt ->sighand locking rules)
Note that tty_mutex is held over tty destruction, so while holding
tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys
are governed by their open file handles. This leaves some holes for tty
access from signal->tty (or any other non file related tty access).
It solves the tty SLAB scribbles we were seeing.
(NOTE: the change from group_send_sig_info to __group_send_sig_info needs to
be examined by someone familiar with the security framework, I think
it is safe given the SEND_SIG_PRIV from other __group_send_sig_info
invocations)
[schwidefsky@de.ibm.com: 3270 fix]
[akpm@osdl.org: various post-viro fixes]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
utsname information is shown in the linux banner, which also is used for
/proc/version (which can have different utsname values inside a uts
namespaces). this patch makes the varying data arguments and changes the
string to a format string, using those arguments.
Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
journal_stop() is not defined for ext4; change to ext4_journal_stop().
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Windows servers are pickier about NTLMv2 than Samba.
This enables more secure mounts to Windows (not just Samba)
ie when "sec=ntlmv2" is specified on the mount.
Signed-off-by: Steve French <sfrench@us.ibm.com>
Allow configuration of OCFS2 timeouts from userspace via configfs
Signed-off-by: Andrew Beekhof <abeekhof@suse.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Subsequent patches (namely userspace heartbeat and configurable timeouts)
require access to the o2nm_cluster struct. This patch does the necessary
shuffling.
Signed-off-by: Andrew Beekhof <abeekhof@suse.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
These got a little bit out of date with ocfs2-tools, make things consistent
again. We reserve a flag for sparse allocation code as that's pretty close
to testable at this point.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This allows users to format an ocfs2 file system with a special flag,
OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT. When the file system sees this flag, it
will not use any cluster services, nor will it require a cluster
configuration, thus acting like a 'local' file system.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (73 commits)
[DLM] Clean up lowcomms
[GFS2] Change gfs2_fsync() to use write_inode_now()
[GFS2] Fix indent in recovery.c
[GFS2] Don't flush everything on fdatasync
[GFS2] Add a comment about reading the super block
[GFS2] Mount problem with the GFS2 code
[GFS2] Remove gfs2_check_acl()
[DLM] fix format warnings in rcom.c and recoverd.c
[GFS2] lock function parameter
[DLM] don't accept replies to old recovery messages
[DLM] fix size of STATUS_REPLY message
[GFS2] fs/gfs2/log.c:log_bmap() fix printk format warning
[DLM] fix add_requestqueue checking nodes list
[GFS2] Fix recursive locking in gfs2_getattr
[GFS2] Fix recursive locking in gfs2_permission
[GFS2] Reduce number of arguments to meta_io.c:getbuf()
[GFS2] Move gfs2_meta_syncfs() into log.c
[GFS2] Fix journal flush problem
[GFS2] mark_inode_dirty after write to stuffed file
[GFS2] Fix glock ordering on inode creation
...
Removes all inline keywords, since the compiler will make static functions
inline when it is appropriate.
Signed-off-by: Avantika Mathur <mathur@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Port fix to the off-by-one in find_next_usable_block's memscan from ext2 to
ext3; but it didn't cause a serious problem for ext3 because the additional
ext3_test_allocatable check rescued it from the error.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext3_new_blocks has a nice io_error label for setting -EIO, so goto that in
the one place that doesn't already use it.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The reservations tree is an rb_tree not a list, so it's less confusing to use
rb_entry() than list_entry() - though they're both just container_of().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
rsv_end is the last block within the reservation, so alloc_new_reservation
should accept start_block == rsv_end as success.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
grp_goal 0 is a genuine goal (unlike -1), so ext3_try_to_allocate_with_rsv
should treat it as such.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext3_new_blocks should reset the reservation window size to 0 when squeezing
the last blocks out of an almost full filesystem, so the retry doesn't skip
any groups with less than half that free, reporting ENOSPC too soon.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a nit in ext4_ext_calc_credits_for_insert(). Besides, credits for the
new root are already added in the index split accounting.
Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Alex Tomas <alex@clusterfs.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the ki_retried member from struct kiocb. I think the idea was
bounced around a while back, but Arnaldo pointed out another reason that we
should dig it up when he pointed out that the last cacheline of struct
kiocb only contains 4 bytes. By removing the debugging member, we save
more than the 8 byte on 64 bit machines.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
io_submit_one assigns ki_left = ki_nbytes = iocb->aio_nbytes, then calls
down to aio_setup_iocb, then to aio_setup_single_vector. In there,
ki_nbytes is reassigned to the same value it got two call stack above it.
There is no need to do so.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On Sat, Dec 02, 2006 at 11:47:44PM +0300, Alexey Dobriyan wrote:
> David Binderman compiled 2.6.19 with icc and grepped for "was set but never
> used". Many warnings are on
> http://coderock.org/kj/unused-2.6.19-fs
Heh, the very first line:
fs/exec.c(1465): remark #593: variable "flag" was set but never used
fs/exec.c:
1477 /*
1478 * We cannot trust fsuid as being the "true" uid of the
1479 * process nor do we know its entire history. We only know it
1480 * was tainted so we dump it as root in mode 2.
1481 */
1482 if (mm->dumpable == 2) { /* Setuid core dump mode */
1483 flag = O_EXCL; /* Stop rewrite attacks */
1484 current->fsuid = 0; /* Dump root private */
1485 }
And then filp_open follows with "flag" totally ignored.
(akpm: this restores the code to Alan's original version. Andi's "Support
piping into commands in /proc/sys/kernel/core_pattern" (cset d025c9db) broke
it).
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kerenl.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Twenty characters in cp936 are not correctly handled. They're all in the
U00 plane. nls_cp936 converts all U00XY to XY but this is not correct for
some characters.(e.g. U00B7 -> A1A4, U00A8 -> A1A7).
This problem is fixed by generating u2c_00 based on all c2u_xx and changing
uni2char() to give U00 plane a special handling. The "â¬"(U20AC,80 in
cp936) is also be handled properly.
Acked-by: Gang Chen <cgdlut@gmail.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- move some file_operations structs into the .rodata section
- move static strings from policy_types[] array into the .rodata section
- fix generic seq_operations usages, so that those structs may be defined
as "const" as well
[akpm@osdl.org: couple of fixes]
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace kmalloc+memset with kzalloc
Signed-off-by: Yan Burman <burman.yan@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes the unused NFSD_OPTIMIZE_SPACE.
Additionally, it does differently what NFSD_OPTIMIZE_SPACE was supposed to do:
Nowadays, gcc knows best when to inline code, and CONFIG_CC_OPTIMIZE_FOR_SIZE
even tells gcc globally whether to optimize for size or for speed. Therefore,
this patch also removes all inline's from these files.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If you do something like:
# touch foo
# tail -f foo &
# rm foo
# <take snapshot>
# <mount snapshot>
you'll panic, because ext3/4 tries to do orphan list processing on the
readonly snapshot device, and:
kernel: journal commit I/O error
kernel: Assertion failure in journal_flush_Rsmp_e2f189ce() at journal.c:1356: "!journal->j_checkpoint_transactions"
kernel: Kernel panic: Fatal exception
for a truly readonly underlying device, it's reasonable and necessary
to just skip orphan list processing.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a proper prototype for remove_inode_dquot_ref() in
include/linux/quotaops.h
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove two different changelog files from fs/sysv/ and merges the INTRO
file into Documentation/filesystems/sysv-fs.txt
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When kernel is compiled with old version of autofs (CONFIG_AUTOFS_FS), and
new (observed at least with 5.x.x) automount deamon is started, kernel
correctly reports incompatible version of kernel and userland daemon, but
then screws things up instead of correct handling of the error:
autofs: kernel does not match daemon version
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
automount/4199 is trying to release lock (&type->s_umount_key) at:
[<c0163b9e>] get_sb_nodev+0x76/0xa4
but there are no more locks to release!
other info that might help us debug this:
no locks held by automount/4199.
stack backtrace:
[<c0103b15>] dump_trace+0x68/0x1b2
[<c0103c77>] show_trace_log_lvl+0x18/0x2c
[<c01041db>] show_trace+0xf/0x11
[<c010424d>] dump_stack+0x12/0x14
[<c012e02c>] print_unlock_inbalance_bug+0xe7/0xf3
[<c012fd4f>] lock_release+0x8d/0x164
[<c012b452>] up_write+0x14/0x27
[<c0163b9e>] get_sb_nodev+0x76/0xa4
[<c0163689>] vfs_kern_mount+0x83/0xf6
[<c016373e>] do_kern_mount+0x2d/0x3e
[<c017513f>] do_mount+0x607/0x67a
[<c0175224>] sys_mount+0x72/0xa4
[<c0102b96>] sysenter_past_esp+0x5f/0x99
DWARF2 unwinder stuck at sysenter_past_esp+0x5f/0x99
Leftover inexact backtrace:
=======================
and then deadlock comes.
The problem: autofs_fill_super() returns EINVAL to get_sb_nodev(), but
before that, it calls kill_anon_super() to destroy the superblock which
won't be needed. This is however way too soon to call kill_anon_super(),
because get_sb_nodev() has to perform its own cleanup of the superblock
first (deactivate_super(), etc.). The correct time to call
kill_anon_super() is in the autofs_kill_sb() callback, which is called by
deactivate_super() at proper time, when the superblock is ready to be
killed.
I can see the same faulty codepath also in autofs4. This patch solves
issues in both filesystems in a same way - it postpones the
kill_anon_super() until the proper time is signalized by deactivate_super()
calling the kill_sb() callback.
[raven@themaw.net: update comment]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Ian Kent <raven@themaw.net>
Cc: <stable@kernel.org>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Port fix to the off-by-one in find_next_usable_block's memscan from ext2 to
ext4; but it didn't cause a serious problem for ext4 because the additional
ext4_test_allocatable check rescued it from the error.
[akpm@osdl.org: build fix]
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext4_new_blocks has a nice io_error label for setting -EIO, so goto that in
the one place that doesn't already use it.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The reservations tree is an rb_tree not a list, so it's less confusing to use
rb_entry() than list_entry() - though they're both just container_of().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
rsv_end is the last block within the reservation, so alloc_new_reservation
should accept start_block == rsv_end as success.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
grp_goal 0 is a genuine goal (unlike -1), so ext4_try_to_allocate_with_rsv
should treat it as such.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext4_new_blocks should reset the reservation window size to 0 when squeezing
the last blocks out of an almost full filesystem, so the retry doesn't skip
any groups with less than half that free, reporting ENOSPC too soon.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the current jbd code, if a buffer on BJ_SyncData list is dirty and not
locked, the buffer is refiled to BJ_Locked list, submitted to the IO and
waited for IO completion.
But the fsstress test showed the case that when a buffer was already
submitted to the IO just before the buffer_dirty(bh) check, the buffer was
not waited for IO completion.
Following patch solves this problem. If it is assumed that a buffer is
submitted to the IO before the buffer_dirty(bh) check and still being
written to disk, this buffer is refiled to BJ_Locked list.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Jan Kara <jack@ucw.cz>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We add a save link for O_DIRECT writes to protect the i_size against the
crashes before we actually finish the I/O. If we hit an -ENOSPC in
aops->prepare_write(), we would do a truncate() to release the blocks which
might have got initialized. Now the truncate would add another save link
for the same inode causing a reiserfs panic for having multiple save links
for the same inode.
Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Signed-off-by: Amit Arora <amitarora@in.ibm.com>
Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some dentries don't need to be globally visible in dentry hashtable.
(pipes & sockets)
Such dentries dont need to wait for a RCU grace period at delete time.
Being able to free them permits a better CPU cache use (hot cache)
This patch combined with (dont insert pipe dentries into dentry_hashtable)
reduced time of { pipe(p); close(p[0]); close(p[1]);} on my UP machine (1.6
GHz Pentium-M) from 3.23 us to 2.86 us (But this patch does not depend on
other patches, only bench results)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We currently insert pipe dentries into the global dentry hashtable. This
is suboptimal because there is currently no way these entries can be used
for a lookup(). (/proc/xxx/fd/xxx uses a different mechanism). Inserting
them in dentry hashtable slows dcache lookups.
To let __dpath() still work correctly (ie not adding a " (deleted)") after
dentry name, we do :
- Right after d_alloc(), pretend they are hashed by clearing the
DCACHE_UNHASHED bit.
- Call d_instantiate() instead of d_add() : dentry is not inserted in
hash table.
__dpath() & friends work as intended during dentry lifetime.
- At dismantle time, once dput() must clear the dentry, setting again
DCACHE_UNHASHED bit inside the custom d_delete() function provided by
pipe code, so that dput() can just kill_it.
This patch, combined with (avoid RCU for never hashed dentries) reduced
time of { pipe(p); close(p[0]); close(p[1]);} on my UP machine (1.6GHz
Pentium-M) from 3.23 us to 2.86 us (But this patch does not depend on other
patches, only bench results)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make the following needlessly global functions static:
- nlm_lookup_host()
- nsm_find()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins wrote:
> Not found anything relevant, but I keep noticing these lines
> in ext2_try_to_allocate_with_rsv(), ext3 and ext4 similar:
>
> } else if (grp_goal > 0 &&
> (my_rsv->rsv_end - grp_goal + 1) < *count)
> try_to_extend_reservation(my_rsv, sb,
> *count-my_rsv->rsv_end + grp_goal - 1);
>
> They're wrong, a no-op in most groups, aren't they? rsv_end is an
> absolute block number, whereas grp_goal is group-relative, so the
> calculation ought to bring in group_first_block? Or I'm confused.
>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: "linux-ext4@vger.kernel.org" <linux-ext4@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins wrote:
> Not found anything relevant, but I keep noticing these lines
> in ext2_try_to_allocate_with_rsv(), ext3 and ext4 similar:
>
> } else if (grp_goal > 0 &&
> (my_rsv->rsv_end - grp_goal + 1) < *count)
> try_to_extend_reservation(my_rsv, sb,
> *count-my_rsv->rsv_end + grp_goal - 1);
>
> They're wrong, a no-op in most groups, aren't they? rsv_end is an
> absolute block number, whereas grp_goal is group-relative, so the
> calculation ought to bring in group_first_block? Or I'm confused.
>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: "linux-ext4@vger.kernel.org" <linux-ext4@vger.kernel.org>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There was lots of #ifdef noise in the kernel due to hotcpu_notifier(fn,
prio) not correctly marking 'fn' as used in the !HOTPLUG_CPU case, and thus
generating compiler warnings of unused symbols, hence forcing people to add
#ifdefs.
the compiler can skip truly unused functions just fine:
text data bss dec hex filename
1624412 728710 3674856 6027978 5bfaca vmlinux.before
1624412 728710 3674856 6027978 5bfaca vmlinux.after
[akpm@osdl.org: topology.c fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Looks like, reiserfs_prepare_file_region_for_write() doesn't contain
several flush_dcache_page() calls.
Found with help from Dmitriy Monakhov <dmonakhov@openvz.org>
[akpm@osdl.org: small speedup]
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Dmitriy Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Define "CORE" string as CORE_STR in single common place.
- Include terminating zero in CORE_STR length calculation for elf_buflen.
- Use roundup(,4) to include alignment in elf_buflen calculation.
[akpm@osdl.org: simplification suggested by Roland]
Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Cc: Daniel Jacobowitz <drow@false.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define elf_addr_t in linux/elf.h. The size of the type is determined using
ELF_CLASS. This allows us to remove the defines that today are spread all
over .c and .h files.
Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Cc: Daniel Jacobowitz <drow@false.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Attempts to read() from the non-existent dmesg buffer will return zero and
userspace tends to get stuck in a busyloop.
So just remove /dev/kmsg altogether if CONFIG_PRINTK=n.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In journal=ordered or journal=data mode retry in ext4_prepare_write()
breaks the requirements of journaling of data with respect to metadata.
The fix is to call commit_write to commit allocated zero blocks before
retry.
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ken Chen <kenneth.w.chen@intel.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In journal=ordered or journal=data mode retry in ext3_prepare_write()
breaks the requirements of journaling of data with respect to metadata.
The fix is to call commit_write to commit allocated zero blocks before
retry.
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ken Chen <kenneth.w.chen@intel.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Port commit a090d9132c into ext2:
All modifications of ->i_flags in inodes that might be visible to somebody
else must be under ->i_mutex. That patch fixes ext2 ioctl() setting S_APPEND.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The Coverity checker noted that this was dead code, since in all places
above in this function, "err" is immediately checked.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Steve Grubb's fzfuzzer tool (http://people.redhat.com/sgrubb/files/
fsfuzzer-0.6.tar.gz) generates corrupt Cramfs filesystems which cause
Cramfs to kernel oops in cramfs_uncompress_block(). The cause of the oops
is an unchecked corrupted block length field read by cramfs_readpage().
This patch adds a sanity check to cramfs_readpage() which checks that the
block length field is sensible. The (PAGE_CACHE_SIZE << 1) size check is
intentional, even though the uncompressed data is not going to be larger
than PAGE_CACHE_SIZE, gzip sometimes generates compressed data larger than
the original source data. Mkcramfs checks that the compressed size is
always less than or equal to PAGE_CACHE_SIZE << 1. Of course Cramfs could
use the original uncompressed data in this case, but it doesn't.
Signed-off-by: Phillip Lougher <phillip@lougher.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As Mikulas points out, (1 << anything) won't be evaluating to zero. This code
is long-dead.
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix hpfs printk warnings:
fs/hpfs/dir.c:87: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
fs/hpfs/dir.c:147: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long int'
fs/hpfs/dir.c:148: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long int'
fs/hpfs/dnode.c:537: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'long unsigned int'
fs/hpfs/dnode.c:854: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'loff_t'
fs/hpfs/ea.c:247: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
fs/hpfs/inode.c:254: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
fs/hpfs/map.c:129: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'ino_t'
fs/hpfs/map.c:135: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'ino_t'
fs/hpfs/map.c:140: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'ino_t'
fs/hpfs/map.c:147: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'ino_t'
fs/hpfs/map.c:154: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'ino_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- switch to error message buffer in .bss
- missing va_end() (htf it worked before?)
- use vsnprintf()
- rename variables to understandable "fmt", "args".
- "const char *fmt", yes.
- add __attribute__((format ...
Still, put that coffee down before reading more.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It would very lame to get buffer overflow via one of the following.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Function v9fs_get_idpool returns int, not u32. Actually it returns -1 on
errors, and these two callers check if the value is smaller than 0, which
was caught by gcc with extra warning flags. Compile tested only but should
be OK, as the value computed in v9fs_get_idpool() is also int.
Signed-of-by: Mika Kukkonen <mikukkon@iki.fi>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@lanl.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I've been using Steve Grubb's purely evil "fsfuzzer" tool, at
http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz
Basically it makes a filesystem, splats some random bits over it, then
tries to mount it and do some simple filesystem actions.
At best, the filesystem catches the corruption gracefully. At worst,
things spin out of control.
As you might guess, we found a couple places in ext4 where things spin out
of control :)
First, we had a corrupted directory that was never checked for
consistency... it was corrupt, and pointed to another bad "entry" of
length 0. The for() loop looped forever, since the length of
ext4_next_entry(de) was 0, and we kept looking at the same pointer over and
over and over and over... I modeled this check and subsequent action on
what is done for other directory types in ext4_readdir...
(adding this check adds some computational expense; I am testing a followup
patch to reduce the number of times we check and re-check these directory
entries, in all cases. Thanks for the idea, Andreas).
Next we had a root directory inode which had a corrupted size, claimed to
be > 200M on a 4M filesystem. There was only really 1 block in the
directory, but because the size was so large, readdir kept coming back for
more, spewing thousands of printk's along the way.
Per Andreas' suggestion, if we're in this read error condition and we're
trying to read an offset which is greater than i_blocks worth of bytes,
stop trying, and break out of the loop.
With these two changes fsfuzz test survives quite well on ext4.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I've been using Steve Grubb's purely evil "fsfuzzer" tool, at
http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz
Basically it makes a filesystem, splats some random bits over it, then
tries to mount it and do some simple filesystem actions.
At best, the filesystem catches the corruption gracefully. At worst,
things spin out of control.
As you might guess, we found a couple places in ext3 where things spin out
of control :)
First, we had a corrupted directory that was never checked for
consistency... it was corrupt, and pointed to another bad "entry" of
length 0. The for() loop looped forever, since the length of
ext3_next_entry(de) was 0, and we kept looking at the same pointer over and
over and over and over... I modeled this check and subsequent action on
what is done for other directory types in ext3_readdir...
(adding this check adds some computational expense; I am testing a followup
patch to reduce the number of times we check and re-check these directory
entries, in all cases. Thanks for the idea, Andreas).
Next we had a root directory inode which had a corrupted size, claimed to
be > 200M on a 4M filesystem. There was only really 1 block in the
directory, but because the size was so large, readdir kept coming back for
more, spewing thousands of printk's along the way.
Per Andreas' suggestion, if we're in this read error condition and we're
trying to read an offset which is greater than i_blocks worth of bytes,
stop trying, and break out of the loop.
With these two changes fsfuzz test survives quite well on ext3.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randomizes -pie compiled binaries from 64k (0x10000) up to ELF_ET_DYN_BASE.
0 -> 64k is excluded to allow NULL ptr accesses to fail.
Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
lock_super() is unnecessary for setting super-block feature flags. Use the
provided *_SET_COMPAT_FEATURE() macros as well.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One of our test team hit a reiserfs_panic while running fsstress tests on
2.6.19-rc1. The message looks like :
REISERFS: panic(device Null superblock):
reiserfs[5676]: assertion !(p->path_length != 1 ) failed at
fs/reiserfs/stree.c:397:reiserfs_check_path: path not properly relsed.
The backtrace looked :
kernel BUG in reiserfs_panic at fs/reiserfs/prints.c:361!
.reiserfs_check_path+0x58/0x74
.reiserfs_get_block+0x1444/0x1508
.__block_prepare_write+0x1c8/0x558
.block_prepare_write+0x34/0x64
.reiserfs_prepare_write+0x118/0x1d0
.generic_file_buffered_write+0x314/0x82c
.__generic_file_aio_write_nolock+0x350/0x3e0
.__generic_file_write_nolock+0x78/0xb0
.generic_file_write+0x60/0xf0
.reiserfs_file_write+0x198/0x2038
.vfs_write+0xd0/0x1b4
.sys_write+0x4c/0x8c
syscall_exit+0x0/0x4
Upon debugging I found that the restart_transaction was not releasing
the path if the th->refcount was > 1.
/*static*/
int restart_transaction(struct reiserfs_transaction_handle *th,
struct inode *inode, struct path *path)
{
[...]
/* we cannot restart while nested */
if (th->t_refcount > 1) { <<- Path is not released in this case!
return 0;
}
pathrelse(path); <<- Path released here.
[...]
This could happen in such a situation :
In reiserfs/inode.c: reiserfs_get_block() ::
if (repeat == NO_DISK_SPACE || repeat == QUOTA_EXCEEDED) {
/* restart the transaction to give the journal a chance to free
** some blocks. releases the path, so we have to go back to
** research if we succeed on the second try
*/
SB_JOURNAL(inode->i_sb)->j_next_async_flush = 1;
-->> retval = restart_transaction(th, inode, &path); <<--
We are supposed to release the path, no matter we succeed or fail. But
if the th->refcount is > 1, the path is still valid. And,
if (retval)
goto failure;
repeat =
_allocate_block(th, block, inode,
&allocated_block_nr, NULL, create);
If the above allocate_block fails with NO_DISK_SPACE or QUOTA_EXCEEDED,
we would have path which is not released.
if (repeat != NO_DISK_SPACE && repeat != QUOTA_EXCEEDED) {
goto research;
}
if (repeat == QUOTA_EXCEEDED)
retval = -EDQUOT;
else
retval = -ENOSPC;
goto failure;
[...]
failure:
[...]
reiserfs_check_path(&path); << Panics here !
Attached here is a patch which could fix the issue.
fix reiserfs/inode.c : restart_transaction() to release the path in all
cases.
The restart_transaction() doesn't release the path when the the journal
handle has a refcount > 1. This would trigger a reiserfs_panic() if we
encounter an -ENOSPC / -EDQUOT in reiserfs_get_block().
Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: <reiserfs-dev@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
free_fdtable_rc() schedules timer to reschedule fddef->wq if
schedule_work() on it returns 0. However, schedule_work() guarantees that
the target work is executed at least once after the scheduling regardless
of its return value. 0 return simply means that the work was already
pending and thus no further action was required.
Another problem is that it used contant '5' as @expires argument to
mod_timer().
Kill unnecessary fddef->timer.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap wote:
> Should FUSE depend on BLOCK? Without that and with BLOCK=n, I get:
>
> inode.c:(.text+0x3acc5): undefined reference to `sb_set_blocksize'
> inode.c:(.text+0x3a393): undefined reference to `get_sb_bdev'
> fs/built-in.o:(.data+0xd718): undefined reference to `kill_block_super
Most fuse filesystems work fine without block device support, so I
think a better solution is to disable the 'fuseblk' filesystem type if
BLOCK=n.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a DESTROY operation for block device based filesystems. With the help of
this operation, such a filesystem can flush dirty data to the device
synchronously before the umount returns.
This is needed in situations where the filesystem is assumed to be clean
immediately after unmount (e.g. ejecting removable media).
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for the BMAP operation for block device based filesystems. This
is needed to support swap-files and lilo.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add 'blksize' option for block device based filesystems. During
initialization this is used to set the block size on the device and the super
block. The default block size is 512bytes.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I never intended this, but people started using fuse to implement block device
based "real" filesystems (ntfs-3g, zfs).
The following four patches add better support for these kinds of filesystems.
Unlike "normal" fuse filesystems, using this feature should require superuser
privileges (enforced by the fusermount utility).
Thanks to Szabolcs Szakacsits for the input and testing.
This patch adds a 'fuseblk' filesystem type, which is only different from the
'fuse' filesystem type in how the 'dev_name' mount argument is interpreted.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove unneeded code from fuse_dentry_revalidate(). This made some sense
while the validity time could wrap around, but now it's a very obvious no-op.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update ext4_statfs to return an FSID that is a 64 bit XOR of the 128 bit
filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla
entry for details:
http://bugzilla.kernel.org/show_bug.cgi?id=136
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update ext3_statfs to return an FSID that is a 64 bit XOR of the 128 bit
filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla
entry for details:
http://bugzilla.kernel.org/show_bug.cgi?id=136
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update ext2_statfs to return an FSID that is a 64 bit XOR of the 128 bit
filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla
entry for details:
http://bugzilla.kernel.org/show_bug.cgi?id=136
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make access(X_OK) take the "noexec" mount option into account.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
check_partition() stops its probe once it hits an I/O error from the
partition checkers. This would prevent the actual partition checker
getting a chance to verify the partition.
So this patch lets check_partition() continue probing untill it hits a
success while recording the I/O error which might have been reported by the
checking routines.
Also, it does some cleanup of the partition methods for ibm, atari and
amiga to return -1 upon hitting an I/O error.
Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The current rescan_partition implementation ignores the errors that comes from
the lower layer. It reports success for unknown partitions as well as I/O
error cases while reading the partition information.
The unknown partition is not (and will not be) considered as an error in the
kernel, since there are legal users of it (e.g, members of a RAID5 MD Device
or a new disk which is not partitioned at all ). Changing this behaviour
would scare the user about a serious problem with their disk and is not
recommended. Thus for both "unknown partitions" to the Linux (eg., DEC
VMS,Novell Netware) and the legal users of NULL partition, would still be
reported as "SUCCESS".
The patch attached here, scares the user about something which he does need to
worry about. i.e, returning -EIO on disk I/O errors while reading the
partition information.
Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Cc: Erik Mouw <erik@harddisk-recovery.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make the workqueues used by XFS freezeable, so their worker threads don't
submit any I/O after the suspend image has been created.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.
[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_KERNEL is an alias of GFP_KERNEL.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_USER is an alias of GFP_USER
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_NOFS is an alias of GFP_NOFS.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently a user process cannot rise its own oom_adj value (i.e.
unprotecting itself from the OOM killer). As this value is stored in the
task structure it gets inherited and the unprivileged childs will be unable
to rise it.
The EPERM will be handled by the generic proc fs layer, as only processes
with the proper caps or the owner of the process will be able to write to
the file. So we allow only the processes with CAP_SYS_RESOURCE to lower
the value, otherwise it will get an EACCES which seems more appropriate
than EPERM.
Signed-off-by: Guillem Jover <guillem.jover@nokia.com>
Acked-by: Andrea Arcangeli <andrea@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenVZ Linux kernel team has found a problem with mounting in compat mode.
Simple command "mount -t smbfs ..." on Fedora Core 5 distro in 32-bit mode
leads to oops:
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: compat_sys_mount+0xd6/0x290
Process mount (pid: 14656, veid=300, threadinfo ffff810034d30000, task ffff810034c86bc0)
Call Trace: ia32_sysret+0x0/0xa
The problem is that data_page pointer can be NULL, so we should skip data
conversion in this case.
Signed-off-by: Andrey Mirkin <amirkin@openvz.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes up most of the things pointed out by akpm and Pavel Machek
with comments below indicating why some things have been left:
Andrew Morton wrote:
>
>> +static struct nodeinfo *nodeid2nodeinfo(int nodeid, gfp_t alloc)
>> +{
>> + struct nodeinfo *ni;
>> + int r;
>> + int n;
>> +
>> + down_read(&nodeinfo_lock);
>
> Given that this function can sleep, I wonder if `alloc' is useful.
>
> I see lots of callers passing in a literal "0" for `alloc'. That's in fact
> a secret (GFP_ATOMIC & ~__GFP_HIGH). I doubt if that's what you really
> meant. Particularly as the code could at least have used __GFP_WAIT (aka
> GFP_NOIO) which is much, much more reliable than "0". In fact "0" is the
> least reliable mode possible.
>
> IOW, this is all bollixed up.
When 0 is passed into nodeid2nodeinfo the function does not try to allocate a
new structure at all. it's an indication that the caller only wants the nodeinfo
struct for that nodeid if there actually is one in existance.
I've tidied the function itself so it's more obvious, (and tidier!)
>> +/* Data received from remote end */
>> +static int receive_from_sock(void)
>> +{
>> + int ret = 0;
>> + struct msghdr msg;
>> + struct kvec iov[2];
>> + unsigned len;
>> + int r;
>> + struct sctp_sndrcvinfo *sinfo;
>> + struct cmsghdr *cmsg;
>> + struct nodeinfo *ni;
>> +
>> + /* These two are marginally too big for stack allocation, but this
>> + * function is (currently) only called by dlm_recvd so static should be
>> + * OK.
>> + */
>> + static struct sockaddr_storage msgname;
>> + static char incmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))];
>
> whoa. This is globally singly-threaded code??
Yes. it is only ever run in the context of dlm_recvd.
>>
>> +static void initiate_association(int nodeid)
>> +{
>> + struct sockaddr_storage rem_addr;
>> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))];
>
> Another static buffer to worry about. Globally singly-threaded code?
Yes. Only ever called by dlm_sendd.
>> +
>> +/* Send a message */
>> +static int send_to_sock(struct nodeinfo *ni)
>> +{
>> + int ret = 0;
>> + struct writequeue_entry *e;
>> + int len, offset;
>> + struct msghdr outmsg;
>> + static char outcmsg[CMSG_SPACE(sizeof(struct sctp_sndrcvinfo))];
>
> Singly-threaded?
Yep.
>>
>> +static void dealloc_nodeinfo(void)
>> +{
>> + int i;
>> +
>> + for (i=1; i<=max_nodeid; i++) {
>> + struct nodeinfo *ni = nodeid2nodeinfo(i, 0);
>> + if (ni) {
>> + idr_remove(&nodeinfo_idr, i);
>
> Didn't that need locking?
Not. it's only ever called at DLM shutdown after all the other threads
have been stopped.
>>
>> +static int write_list_empty(void)
>> +{
>> + int status;
>> +
>> + spin_lock_bh(&write_nodes_lock);
>> + status = list_empty(&write_nodes);
>> + spin_unlock_bh(&write_nodes_lock);
>> +
>> + return status;
>> +}
>
> This function's return value is meaningless. As soon as the lock gets
> dropped, the return value can get out of sync with reality.
>
> Looking at the caller, this _might_ happen to be OK, but it's a nasty and
> dangerous thing. Really the locking should be moved into the caller.
It's just an optimisation to allow the caller to schedule if there is no work
to do. if something arrives immediately afterwards then it will get picked up
when the process re-awakes (and it will be woken by that arrival).
The 'accepting' atomic has gone completely. as Andrew pointed out it didn't
really achieve much anyway. I suspect it was a plaster over some other
startup or shutdown bug to be honest.
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Pavel Machek <pavel@ucw.cz>
This is a bit better than the previous version of gfs2_fsync()
although it would be better still if we were able to call a
function which only wrote the inode & metadata. Its no big deal
though that this will potentially write the data as well since
the VFS has already done that before calling gfs2_fsync(). I've
also added a comment to explain whats going on here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@osdl.org>
JFS_NOINTEGRITY and JFS_USRQUOTA are defined to be the same value.
Change JFS_NOINTEGRITY to 0x40 and re-order the flags in the header
file to avoid repeating this problem.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
The tk_pid field is an unsigned short. The proper print format specifier for
that type is %5u, not %4d.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We're really accounting for the same page twice now: once in
generic_writepages(), and once in nfs_scan_dirty().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is now no reason to account for the dirty pages in the NFS code,
since the VM code will now do it for us via __set_page_dirty_nobuffers(),
and set_page_writeback().
We still need to keep the accounting of stable writes, though.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
invalidate_inode_pages2_range() will clear the PG_dirty bit before calling
try_to_release_page().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This will ensure that we can call set_page_writeback() from within
nfs_writepage(), which is always called with the page lock set.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We will want to allow nfs_writepage() to distinguish between pages that
have been marked as dirty by the VM, and those that have been marked as
dirty by nfs_updatepage().
In the former case, the entire page will want to be written out, and so any
requests that were pending need to be flushed out first.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Maintaining two parallel ways of doing synchronous writes is rather
pointless. This patch gets rid of the legacy nfs_writepage_sync(), and
replaces it with the faster asynchronous writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We always ensure that the nfs_open_context holds a reference to the dentry,
so the test in nfs_writepage() for whether or not the inode is referenced
is redundant.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This will allow fast lookup of the nfs_page from the struct page instead of
having to search the radix tree.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove use of the Big Kernel Lock around indirect calls to
nfs3_proc_readlink and nfs4_proc_readlink, both of which
basically call rpc_call_sync.
Signed-off-by: Frank Filz <ffilz@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove use of the Big Kernel Lock around calls to rpc_call_sync.
Signed-off-by: Frank Filz <ffilz@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove use of the Big Kernel Lock around calls to rpc_execute.
Signed-off-by: Frank Filz <ffilz@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently nfs_sync_inode_wait() will fail to loop correctly when we call
nfs_sync_inode_wait with the FLUSH_INVALIDATE argument.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We must always call ->read_done() before we truncate the page data, or
decide to flag an error. The reasons are that
in NFSv2, ->read_done() is where the eof flag gets set.
in NFSv3/v4 ->read_done() handles EJUKEBOX-type errors, and
v4 state recovery.
However, we need to mark the pages as uptodate before we deal with short
read errors, since we may need to modify the nfs_read_data arguments.
We therefore split the current nfs_readpage_result() into two parts:
nfs_readpage_result(), which calls ->read_done() etc, and
nfs_readpage_retry(), which subsequently handles short reads.
Note: Removing the code that retries in case of a short read also fixes a
bug in nfs_direct_read_result(), which used to return a corrupted number of
bytes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When trying to open a file with the O_EXCL flag over NFS on a server that does
not support exclusive mode, the file does not open. The reason,
rpc_call_sync returns a errno number, and not the nfs error number. I fixed
it by changing the status check in nfs3proc.c. Either this is how it should
be fixed, or rpc_call_sync should be fixed to return the NFS error.
Signed-off-by: Andy Ryan <genanr@allantgroup.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use RCU to ensure that we can safely call rpc_finish_wakeup after we've
called __rpc_do_wake_up_task. If not, there is a theoretical race, in which
the rpc_task finishes executing, and gets freed first.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As per comments from Andrew Morton and Jan Engelhardt, this fixes the
indent and removes the "static" from a variable declaration since its
not needed in this case (now allocated on the stack of the function
in question).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Andrew Morton <akpm@osdl.org>
Conflicts:
drivers/ata/libata-scsi.c
include/linux/libata.h
Futher merge of Linus's head and compilation fixups.
Signed-Off-By: David Howells <dhowells@redhat.com>
Conflicts:
drivers/infiniband/core/iwcm.c
drivers/net/chelsio/cxgb2.c
drivers/net/wireless/bcm43xx/bcm43xx_main.c
drivers/net/wireless/prism54/islpci_eth.c
drivers/usb/core/hub.h
drivers/usb/input/hid-core.c
net/core/netpoll.c
Fix up merge failures with Linus's head and fix new compilation failures.
Signed-Off-By: David Howells <dhowells@redhat.com>
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits)
[POWERPC] Add missing EXPORTS for mpc52xx support
[POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment
[POWERPC] ps3: add a default zImage target
[POWERPC] Add of_platform_bus support to mpc52xx psc uart driver
[POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver
[POWERPC] Fix debug printks for 32-bit resources in the PCI code
[POWERPC] Replace kmalloc+memset with kzalloc
[POWERPC] Linkstation / kurobox support
[POWERPC] Add the e300c3 core to the CPU table.
[POWERPC] ppc: m48t35 add missing bracket
[POWERPC] iSeries: don't build head_64.o unnecessarily
[POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily
[POWERPC] Fix cputable.h for combined build
[POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries
[POWERPC] Allow xmon to build on legacy iSeries
[POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3
[POWERPC] Tell firmware we can handle POWER6 compatible mode
[POWERPC] Clean images in arch/powerpc/boot
[POWERPC] Fix OF pci flags parsing
[POWERPC] defconfig for lite5200 board
...
This patch adds SPU elf notes to the coredump. It creates a separate note
for each of /regs, /fpcr, /lslr, /decr, /decr_status, /mem, /signal1,
/signal1_type, /signal2, /signal2_type, /event_mask, /event_status,
/mbox_info, /ibox_info, /wbox_info, /dma_info, /proxydma_info, /object-id.
A new macro, ARCH_HAVE_EXTRA_NOTES, was created for architectures to
specify they have extra elf core notes.
A new macro, ELF_CORE_EXTRA_NOTES_SIZE, was created so the size of the
additional notes could be calculated and added to the notes phdr entry.
A new macro, ELF_CORE_WRITE_EXTRA_NOTES, was created so the new notes
would be written after the existing notes.
The SPU coredump code resides in spufs. Stub functions are provided in the
kernel which are hooked into the spufs code which does the actual work via
register_arch_coredump_calls().
A new set of __spufs_<file>_read/get() functions was provided to allow the
coredump code to read from the spufs files without having to lock the
SPU context for each file read from.
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Dwayne Grant McConnell <decimal@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Implement .permission() in ocfs2_file_iops, ocfs2_special_file_iops and
ocfs2_dir_iops.
This helps us avoid some multi-node races with mode change and vfs
operations.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch makes the needlessly global configfs_dirent_exists() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Conditionally update atime in ocfs2_file_aio_read(), ocfs2_readdir() and
ocfs2_mmap().
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch adds the core routines for updating atime in ocfs2.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Add splice read/write support in ocfs2.
ocfs2_file_splice_read/write are very similar to ocfs2_file_aio_read/write.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
configfs_unregister_subsystem() nests a pair of inode i_mutex acquisitions,
and thus needs annotation via mutex_lock_nested().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This is mostly a search and replace as ocfs2_journal_handle is now no more
than a container for a handle_t pointer.
ocfs2_commit_trans() becomes very straight forward, and we remove some out
of date comments / code.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
All callers either pass in NULL directly, or a local variable that is
already set to NULL.
The internals of ocfs2_start_trans() get a nice cleanup as a result.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This gets us rid of a slab we no longer need, as well as removing the
majority of what's left on ocfs2_journal_handle.
ocfs2_commit_unstarted_handle() has no more real work to do, so remove that
function too.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We can also delete the unused infrastructure which was once in place to
support this functionality. ocfs2_inode_private loses ip_handle and
ip_handle_list. ocfs2_journal_handle loses handle_list.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Instead we record our state on the allocation context structure which all
callers already know about and lifetime correctly. This means the
reservation functions don't need a handle passed in any more, and we can
also take it off the alloc context.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Callers can set h_sync directly on the handle_t, whether a transaction has
been started or not can be determined via the existence of the handle_t on
the struct ocfs2_journal_handle.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
No reason to use our wrapper struct in this function, so take the handle_t
directly.
Also fixes a bug where we were incorrectly setting the handle to NULL in
case of a failure from journal_restart()
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch makes the needlessly global ocfs2_create_new_lock() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
Driver core: show drivers in /sys/module/
Documentation/driver-model/platform.txt update/rewrite
Driver core: platform_driver_probe(), can save codespace
driver core: Use klist_remove() in device_move()
driver core: Introduce device_move(): move a device to a new parent.
Driver core: make drivers/base/core.c:setup_parent() static
driver core: Introduce device_find_child().
sysfs: sysfs_write_file() writes zero terminated data
cpu topology: consider sysfs_create_group return value
Driver core: Call platform_notify_remove later
ACPI: Change ACPI to use dev_archdata instead of firmware_data
Driver core: add dev_archdata to struct device
Driver core: convert sound core to use struct device
Driver core: change mem class_devices to be real devices
Driver core: convert fb code to use struct device
Driver core: convert firmware code to use struct device
Driver core: convert mmc code to use struct device
Driver core: convert ppdev code to use struct device
Driver core: convert PPP code to use struct device
Driver core: convert cpuid code to use struct device
...
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix timezone handling on stat to os/2
[CIFS] Incorrect hardlink count when original file is cached (oplocked)
Provide a function device_move() to move a device to a new parent device. Add
auxilliary functions kobject_move() and sysfs_move_dir().
kobject_move() generates a new uevent of type KOBJ_MOVE, containing the
previous path (DEVPATH_OLD) in addition to the usual values. For this, a new
interface kobject_uevent_env() is created that allows to add further
environmental data to the uevent at the kobject layer.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
since most of the files in sysfs are text files,
it would be nice, if the "store" function called
during sysfs_write_file() gets a zero terminated
string / data.
The current implementation seems not to ensure this.
(But only if it is the first time the zeroed buffer
page is allocated.)
So the buffer can be scanned by sscanf() easily,
for example.
This patch simply sets a \0 char behind the
data in buffer->page.
Signed-off-by: Thomas Maier <balagi@justmail.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch modifies blk_rq_map/unmap_user() and the cdrom and scsi_ioctl.c
users so that it supports requests larger than bio by chaining them together.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The target mode support is mapping in bios using bio_map_user. The
current targets do not need their len to be aligned with a queue limit
so this check is causing some problems. Note: pointers passed into the
kernel are properly aligned by usersapace tgt code so the uaddr check
in bio_map_user is ok.
The major user, blk_bio_map_user checks for the len before mapping
so it is not affected by this patch.
And the semi-newly added user blk_rq_map_user_iov has been failing
out when the len is not aligned properly so maybe people have been
good and not sending misaligned lens or that path is not used very
often and this change will not be very dangerous. st and sg do not
check the length and we have not seen any problem reports from those
wider used paths so this patch should be fairly safe - for mm
and wider testing at least.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The gfs2_fsync() function was doing a journal flush on each
and every call. While this is correct, its also a lot of
overhead. This patch means that on fdatasync flushes we
rely on the VFS to flush the data for us and we don't do
a journal flush unless we really need to.
We have to do a journal flush for stuffed files though because
they have the data and the inode metadata in the same block.
Journaled files also need a journal flush too of course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The comment explains why we use the bio functions to read
the super block.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Srinivasa Ds <srinivasa@in.ibm.com>
While mounting the gfs2 filesystem,our test team had a problem and we
got this error message.
=======================================================
GFS2: fsid=: Trying to join cluster "lock_nolock", "dasde1"
GFS2: fsid=dasde1.0: Joined cluster. Now mounting FS...
GFS2: not a GFS2 filesystem
GFS2: fsid=dasde1.0: can't read superblock: -22
==========================================================================
On debugging further we found that problem is while reading the super
block(gfs2_read_super) and comparing the magic number in it.
When I replace the submit_bio() call(present in gfs2_read_super) with
the sb_getblk() and ll_rw_block(), mount operation succeded.
On further analysis we found that before calling submit_bio(),
bio->bi_sector was set to "sector" variable. This "sector" variable has
the same value of bh->b_blocknr(block number). Hence there is a need to
multiply this valuwith (blocksize >> 9)(9 because,sector size
2^9,samething happens in ll_rw_block also, before calling submit_bio()).
So I have developed the patch which solves this problem. Please let me
know your comments.
================================================================
Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As pointed out by Adrian Bunk, the gfs2_check_acl() function is no
longer used. This patch removes it and renamed gfs2_check_acl_locked()
to gfs2_check_acl() since we only need one variant of that function now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Adrian Bunk <bunk@stusta.de>
This fixes the following gcc warnings generated on
the architectures where uint64_t != unsigned long long (e.g. ppc64).
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'uint64_t'
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'uint64_t'
fs/dlm/recoverd.c:48: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:202: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:210: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix function parameter typing:
fs/gfs2/glock.c💯 warning: function declaration isn't a prototype
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We often abort a recovery after sending a status request to a remote node.
We want to ignore any potential status reply we get from the remote node.
If we get one of these unwanted replies, we've often moved on to the next
recovery message and incremented the message sequence counter, so the
reply will be ignored due to the seq number. In some cases, we've not
moved on to the next message so the seq number of the reply we want to
ignore is still correct, causing the reply to be accepted. The next
recovery message will then mistake this old reply as a new one.
To fix this, we add the flag RCOM_WAIT to indicate when we can accept a
new reply. We clear this flag if we abort recovery while waiting for a
reply. Before the flag is set again (to allow new replies) we know that
any old replies will be rejected due to their sequence number. We also
initialize the recovery-message sequence number to a random value when a
lockspace is first created. This makes it clear when messages are being
rejected from an old instance of a lockspace that has since been
recreated.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When the not_ready routine sends a "fake" status reply with blank status
flags, it needs to use the correct size for a normal STATUS_REPLY by
including the size of the would-be config parameters. We also fill in the
non-existant config parameters with an invalid lvblen value so it's easier
to notice if these invalid paratmers are ever being used.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a printk format warning in fs/gfs2/log.c:
fs/gfs2/log.c:322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t'
Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Requests that arrive after recovery has started are saved in the
requestqueue and processed after recovery is done. Some of these requests
are purged during recovery if they are from nodes that have been removed.
We move the purging of the requests (dlm_purge_requestqueue) to later in
the recovery sequence which allows the routine saving requests
(dlm_add_requestqueue) to avoid filtering out requests by nodeid since the
same will be done by the purge. The current code has add_requestqueue
filtering by nodeid but doesn't hold any locks when accessing the list of
current nodes. This also means that we need to call the purge routine
when the lockspace is being shut down since the add routine will not be
rejecting requests itself any more.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The readdirplus NFS operation can result in gfs2_getattr being
called with the glock already held. In this case we do not want
to try and grab the lock again.
This fixes Red Hat bugzilla #215727
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since gfs2_permission may be called either from the VFS (in which case
we need to obtain a shared glock) or from GFS2 (in which case we already
have a glock) we need to test to see whether or not a lock is required.
The original test was buggy due to a potential race. This one should
be safe.
This fixes Red Hat bugzilla #217129
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the superblock and the address_space are determined by the
glock, we might as well just pass that as the argument since all
the callers already have that available.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a bug which resulted in poor performance due to flushing
the journal too often. The code path in question was via the inode_go_sync()
function in glops.c. The solution is not to flush the journal immediately
when inodes are ejected from memory, but batch up the work for glockd to
deal with later on. This means that glocks may now live on beyond the end of
the lifetime of their inodes (but not very much longer in the normal case).
Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in
calculation of the number of free journal blocks.
The gfs2_logd process has been altered to be more responsive to the journal
filling up. We now wake it up when the number of uncommitted journal blocks
has reached the threshold level rather than trying to flush directly at the
end of each transaction. This again means doing fewer, but larger, log
flushes in general.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The go_sync callback took two flags, but one of them was set on every
call, so this patch removes once of the flags and makes the previously
conditional operations (on this flag), unconditional.
The go_inval callback took three flags, each of which was set on every
call to it. This patch removes the flags and makes the operations
unconditional, which makes the logic rather more obvious.
Two now unused flags are also removed from incore.h.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 requires the CRC32 library function. This was reported by
Toralf Förster.
Cc: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When deleting directory entries, we set the inum.no_addr to zero
in a dirent when its the first dirent in a block and thus cannot
be merged into the previous dirent as is the usual case. In gfs1,
inum.no_formal_ino was used instead.
This patch changes gfs2 to set both inum.no_addr and inum.no_formal_ino
to zero. It also changes the test from just looking at inum.no_addr to
look at both inum.no_addr and inum.no_formal_ino and a sentinel is
now considered to be a dirent in which _either_ (or both) of them
is set to zero.
This resolves Red Hat bugzillas: #215809, #211465
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The gfs2_glock_nq_m_atime function is unused in so far as its only
ever called with num_gh = 1, and this falls through to the
gfs2_glock_nq_atime function, so we might as well call that directly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the locking for bmap into the bmap function itself
rather than using a wrapper function. It also fixes a bug where
the boundary flag was set on the wrong bh. Also the flags on
the mapped bh are reset earlier in the function to ensure that
they are 100% correct on the error path.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Change from GFP_KERNEL to GFP_NOFS as this was causing a
slow down when trying to push inodes from cache.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The attached patch fixes the DLM config so that it selects the chosen network
transport. It should fix the bug where DLM can be left selected when NET gets
unselected. This incorporates all the comments received about this patch.
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Andrew Morton <akpm@osdl.org>
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
RH BZ 211622
The ALTMODE flag can be set in the lock master's copy of the lock but
never cleared, so ALTMODE will also be returned in a subsequent conversion
of the lock when it shouldn't be. This results in lock_dlm incorrectly
switching to the alternate lock mode when returning the result to gfs
which then asserts when it sees the wrong lock state. The fix is to
propagate the cleared sbflags value to the master node when the lock is
requested. QA's d_rwrandirectlarge test triggers this bug very quickly.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
The previous patch "[DLM] fix aborted recovery during
node removal" was incomplete as discovered with further testing. It set
the bit for the RS_LOCKS barrier but did not then wait for the barrier.
This is often ok, but sometimes it will cause yet another recovery hang.
If it's a new node that also has the lowest nodeid that skips the barrier
wait, then it misses the important step of collecting and reporting the
barrier status from the other nodes (which is the job of the low nodeid in
the barrier wait routine).
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
When many nodes are joining a lockspace simultaneously, the dlm gets a
quick sequence of stop/start events, a pair for adding each node.
dlm_controld in user space sends dlm_recoverd in the kernel each stop and
start event. dlm_controld will sometimes send the stop before
dlm_recoverd has had a chance to take up the previously queued start. The
stop aborts the processing of the previous start by setting the
RECOVERY_STOP flag. dlm_recoverd is erroneously clearing this flag and
ignoring the stop/abort if it happens to take up the start after the stop
meant to abort it. The fix is to check the sequence number that's
incremented for each stop/start before clearing the flag.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
With the new cluster infrastructure, dlm recovery for a node removal can
be aborted and restarted for a node addition. When this happens, the
restarted recovery isn't aware that it's doing recovery for the earlier
removal as well as the addition. So, it then skips the recovery steps
only required when nodes are removed. This can result in locks not being
purged for failed/removed nodes. The fix is to check for removed nodes
for which recovery has not been completed at the start of a new recovery
sequence.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
There's a race between dlm_recoverd (1) enabling locking and (2) clearing
out the requestqueue, and dlm_recvd (1) checking if locking is enabled and
(2) adding a message to the requestqueue. An order of recoverd(1),
recvd(1), recvd(2), recoverd(2) will result in a message being left on the
requestqueue. The fix is to have dlm_recvd check if dlm_recoverd has
enabled locking after taking the mutex for the requestqueue and if it has
processing the message instead of queueing it.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 213682
If two nodes leave the lockspace (while unmounting the fs in the case of
gfs) after one has sent a STATUS message to the other, STATUS/STATUS_REPLY
messages will then ping-pong between the nodes when neither of them can
find the lockspace in question any longer. We kill this by not sending
another STATUS message when we get a STATUS_REPLY for an unknown
lockspace.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 213684
If a node sends an lkb to the new master (RCOM_LOCK message) during
recovery and recovery is then aborted on both nodes before it gets a
reply, the res_recover_locks_count needs to be reset to 0 so that when the
subsequent recovery comes along and sends the lkb to the new master again
the assertion doesn't trigger that checks that counter is zero.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch adds a TCP based communications layer
to the DLM which is compile time selectable. The existing SCTP
layer gives the advantage of allowing multihoming, whereas
the TCP layer has been heavily tested in previous versions of
the DLM and is known to be robust and therefore can be used as
a baseline for performance testing.
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Stuffed files only consist of a maximum of
(gfs2 block size - sizeof(struct gfs2_dinode)) bytes. Since the
gfs2 block size is always less than page size, we will never see
a call to stuffed_readpage for anything other than the first page
in the file.
Signed-off-by: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The log lock is dropped prior to io submittion, but
this exposes a hole in which the log data structures
may be going away due to a truncate.
Store the buffer head in a local pointer prior to
dropping the lock and relay on the buffer_head lock
for consitency on the buffer head.
Signed-Off-By: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This function wasn't really doing the right thing. There was no need
to update the inode size at this point and the updating of the
i_blocks field has now been moved to the places where di_blocks is
updated. A result of this patch and some those preceeding it is that
unlocking a glock is now a much more efficient process, since there
is no longer any requirement to copy data from the gfs2 inode into
the vfs inode at this point.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the inode number is constant, we don't need to keep updating
it everytime we refresh the other inode fields.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We were setting the inode flags from GFS2's flags far too often, even when they
couldn't possibly have changed. This patch reduces the amount of flag
setting going on so that we do it only when the inode is read in or
when the flags have changed. The create case is covered by the "when
the inode is read in" case.
This also fixes a bug where we didn't set S_SYNC correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a race between the glock and the page lock encountered
during truncate in gfs2_readpage and gfs2_prepare_write. The gfs2_readpages
function doesn't need the same fix since it only uses a try lock anyway, so
it will fail back to gfs2_readpage in the case of a potential deadlock.
This bug was spotted by Russell Cattelan.
Cc: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is no way to set the GL_DUMP flag, and in any case the
same thing can be done with systemtap if required for debugging,
so this removes it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The meta_header for an ondisk rgrp never changes, so there is no point
copying it in and back out to disk. Also there is no reason to keep
a copy for each rgrp in memory.
The code already checks to ensure that the header is correct before
it calls the routine to copy the data in, so that we don't even need
to check whether its correct on disk in the functions in ondisk.c
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
