Add data length information in oem data response messages. Currently
maximum response size is passed to upper layers.
Change-Id: Id74d44e03755af9a5402e5409ee5f6b5e7abbb7c
CRs-Fixed: 942260
Conditional compilation option WLAN_FEATURE_VOWIFI_11R is always
defined in cld3.0 and underlying code is permanent in the driver.
Hence, remove #ifdef WLAN_FEATURE_VOWIFI_11R check from WMA source
code.
Remove -DWLAN_FEATURE_VOWIFI_11R compilation flag from Kbuild.
CRs-Fixed: 960105
Change-Id: Idbcea2faf9aa31ef62920ef322d6de61378198a6
WoW periodic transmit pattern handler has no error log if
given input format is wrong. Add error log message to indicate
input is wrong and suggest the correct input format.
Change-Id: Ie3a37c7e1a9b9fd8a974c68a5cc7456b1b622168
CRs-Fixed: 973006
Currently WoW debug fs support is limited to 1st interface.
FW supports wow and periodic pattern generation on all
interface types. Extend wow debug fs support to all interfaces.
Change-Id: I83deb1845f921ecf8c5422786e025a051ee3c561
CRs-Fixed: 973003
The self MAC address should be filled from the previous
session in PE and has to be passed to WMA which is used
while creating the new PEER.
CRs-Fixed: 973463
Change-Id: If7f0d4d8400fd8dfcafb08e3795e434621b67a6d
Log the improtant messages with respect to roam synch propagation
by default so that they appear in the kernel logs and give an
hint of roaming. Also ensure not to log too much.
CRs-Fixed: 972498
Change-Id: Ia0bd7c9960a29275f872a9ec18173b8c5a08539a
If roaming is in progress, then there is a good chance to connect
to a better AP very soon, so ignore the sta kickout event that is
received from the firmware.
CRs-Fixed: 947880
Change-Id: I9197ed09a40d9acb706d1bfa535a4eb292a1af74
Do not include replay counter attribute when roaming
is done for CCKM authentication type. For 11R and CCKM
roaming, the re-association frame carries additional
IE's which help cut down the Key exchange post
association. Hence there would be no EAPOL exchange
and hence it is not needed to include the replay
counter attribute to the supplicant after roaming.
CRs-Fixed: 972486
Change-Id: Ib861bdc91e949605788a19df4a706e6544dd4c73
The CB mode could get changed after roaming since the non-AP STA
can roam to an AP which has a different channel bonding mode.
So, derive the CB mode from the IE's and accordingly set in the
connected profile.
CRs-Fixed: 972479
Change-Id: I01daa88d69397fb0e88615656903c43ed623ed38
Current code is using seperate change interface for IBSS and
STA/P2PCLI.
Fix the API such that IBSS/STA/P2PCLI all can use same API.
Change-Id: I7a1d9fa3ef42091fcb7f71d95b604e3dceb8da50
CRs-Fixed: 973626
wma_recreate_ibss_vdev_and_bss_peer is obsoleted API and no longer
needed. Remove this API as part of clean-up efforts.
Change-Id: I277e775b7f44ca5aa05129d45e80c98fe1a53753
CRs-Fixed: 973626
Remove #ifdef WLAN_FEATURE_VOWIFI from host driver source code.
It has alwasys been defined in Kbuild and underlying features
will be permanent in cld3.0. Those features are 11r radio
resource measurement, beacon report, link report, neighbor
report and power constraint.
Please note that WLAN_FEATURE_VOWIFI_11R is used for different
purpose and it is not removed in this change.
CRs-Fixed: 958729
Change-Id: Icd80e9cce08c4662e86ccda94491c1fc22c5756d
Conditional compilation option WLAN_FEATURE_VOWIFI_11R is always
defined in cld3.0 and underlying code is permanent in the driver.
Hence, remove #ifdef WLAN_FEATURE_VOWIFI_11R check from MAC source
code.
CRs-Fixed: 960105
Change-Id: Iae95c169c7e78310d18cbf9ae097501d4c66230c
This patch fixes:
1) Fixes variable names as per linux kernel coding guidelines.
2) Removes PELOG definitions.
3) Fixes few of long debug prints.
4) Fixes function headers
for file lim_process_assoc_req_frame.c. This patch is then used as
base for reindentation of function lim_process_assoc_req_frame()
Change-Id: I5d4a39356b4555789ca9119f54a54766594b26c3
CRs-Fixed: 824222
Log the channel switch and extended channel switch information
element along with the wide channel bandwidth sub element to
debug any channel switch related issues. Since the IEs are
populated only during channel switch, this logging of the IEs
from the beacon should not have any impact in performance.
Change-Id: I7a7e0dcf45f39fb6e4d049dde0b02289bde1d4f7
CRs-Fixed: 972007
Ensure that the PE session is extracted using the SME session id during
Nss update request. The Nss update request carries the SME session id
and not the PE session id. Fixing the implementation by invoking
pe_find_session_by_sme_session_id() to extract the PE session entry
using the SME session id, instead of pe_find_session_by_session_id()
which uses the PE session id.
Change-Id: If388fa917635c7a536d21fcfb664b081babd5c2a
CRs-Fixed: 970802
Update the policy manager table during channel switch in case of
STA/CLI/SAP/P2P-GO mode. The vdev (re)start response carries the
updated vdev parameters such as the new MAC to which the vdev
connection moved to etc.
Change-Id: I55a56acdba8234e09d1439698b2b13751d4e9b2d
CRs-Fixed: 970794
Ensure that application triggered channel switch impacts only the
interface of interest. eSAP_DFS_CHNL_SWITCH_ANNOUNCEMENT_START
gets used for both radar detected channel switch and application
triggered channel switch using ioctl or nl commands. On radar
detected channel switch, if radar was detected by one of the SAP
interface, all SAP interfaces in the driver would vacate the
channel. In application triggered channel switch, only the
interface of interest should vacate the channel.
Change-Id: I8eee8bde89ae44eec31c1bd35a99a78e517b4a5e
CRs-Fixed: 969323
qcacld-2.0 to qcacld-3.0 propagation
When runtime suspend fails because of wma_suspend_req() not
completing in time, PM runtime workqueue posts resume request to
MC thread to clean-up. If MC thread is busy or slow in processing
resume request and after the timeout Runtime PM framework posts
another suspend request then there may be race condition between
MC thread processing resume request (Or even suspend request) and
Runtime PM workqueue posting subsequent suspend request.
Synchronize subsequent suspend request by not allowing the
runtime suspend till resume requests completes in MC thread
context.
Change-Id: Ie9aaf72fbced41f8d23640b9032a3c2236dc6826
CRs-fixed: 921373
WoW is getting enabled even in disconnected state when
PNO, EXT_SCAN or LPASS is not enabled. Enable wow only
when one of interface is in beaconing mode, connected
state or PNO/EXT_SCAN/LPASS is enabled.
Change-Id: I30226700844c9b4adbe3a0659a270b99dc6e66f8
CRs-Fixed: 971738
Ensure that the per vdev rx callback is registered before
registering the peer. The peer registration function may
try to flush the rx frames so we need to ensure that the rx
callback is registered before it is called.
Change-Id: Ibd1d73d89105bbc3f9d29fa2c64e9f515d4b0da5
CRs-Fixed: 1000834
Incremental CLD3.1 Release 5.1.0.1G after relocating
the driver development to new branch and path.
Change-Id: Ib75f16fb56ab6a9306f09377bb3df2094d0fc516
CRs-Fixed: 688141
Incremental CLD3.1 Release 5.1.0.1F after relocating
the driver development to new branch and path.
Change-Id: Ic34b6e6f810f1ab32eaefe0b624b4183b86a43cf
CRs-Fixed: 688141
Core datapath structures should be opaque to non-datapath modules,
remove the references to them.
Change-Id: I3618253566a971c27f16b14923d1ff8028718918
CRs-Fixed: 994638
Changes to register a per vdev tx callback function.
Register a per-vdev transmit function during vdev registration.
The OS interface (HDD) adapter stores this transmit function and
invokes it to transmit data frames.
Change-Id: I1dfe6f58d1d26069dadc2d719fff242c29071bad
CRs-Fixed: 994638
Changes to register a per vdev rx callback function.
Register a per-vdev receive callback function using the vdev registration
API provided by the converged data path API. The changes include
- removing the older method of registering the receive callback
- modify the HDD callback to adhere to the rx callback function defined
by the converged data path API
- modify the invocation of the callback function in the data path
Change-Id: I2aef905132af4b3d7db22c7ec315d114607c9383
CRs-Fixed: 994638
Change the data path and external modules to use the new
converged common data path APIs.
Change-Id: Ifb48178efd012b6ad9ea6f6d5230d0a809922b1c
CRs-Fixed: 994638
Incremental CLD3.1 Release 5.1.0.1E after relocating
the driver development to new branch and path.
Change-Id: I49934210bb4c92f7cf9d700845812e49615af6da
CRs-Fixed: 688141
Add runtime pm enable and delay ini items in hdd.
If runtime pm isn't enabled, the wlan driver will
not perform runtime suspends.
If runtime pm is enabled, the wlan driver will
perform a runtime suspend after delay time in
miliseconds.
Change-Id: I7fa05b9fc1e81bd189e8336efcb3d2977732ed81
CRs-Fixed: 935300
In data path per packet logging is overwriting previous useful
logs. Use HDD data module ID for WMM per packet logging with
debug log level such that by defualt per packet WMM debug log
messages are not logged.
Change-Id: I64053a6d5048a14277e01f35fcb6e0bbf6ac42b9
CRs-Fixed: 969712
Incremental CLD3.1 Release 5.1.0.1D after relocating
the driver development to new branch and path.
Change-Id: Ifc161a74d121e11e9e21c3f2006889de8a5c71b8
CRs-Fixed: 688141
Rename hif_callbacks to hif_driver_state_callbacks and remove
function pointer for monotonic API and fix some minor typos.
Change-Id: Iae2326e26b58a00e4cc197104b31aca36d569a8e
CRs-Fixed: 967765
Incremental CLD3.1 Release 5.1.0.1C after relocating
the driver development to new branch and path.
Change-Id: Icef0cc257781d8baf5f9684ffc08d6808a9bf4d4
CRs-Fixed: 688141
Move tlv formation of wmi vdev start, vdev restart related commands
to common wmi layer from wma layer.
Change-Id: Ic01c9720fd73cb47ea24313c947d6c2a03dbaea4
CRs-Fixed: 987362
Move tlv formation of wmi roam scan commands to common wmi
layer from wma layer.
Change-Id: Iee92f71c6ae7470449f514f60a804a9cf021ccf0
CRs-Fixed: 987362
Move tlv formation of wmi feature related commands to common wmi
layer from wma layer.
Change-Id: Ice267f5fc2b057c0c5e288888c57886a1c61006e
CRs-Fixed: 987362
Move tlv formation of wmi datapath related commands to common wmi
layer from wma layer.
Change-Id: I5f7bf9eb578d0777e131b2b659e64d9365f4faec
CRs-Fixed: 987362
Move tlv formation of wmi peer assoc command to common wmi layer
from wma layer.
CRs-Fixed: 976998
Change-Id: I0562862a7acc16b88bbd295b998397f1acf7973a
