Commit Graph

315 Commits

Author SHA1 Message Date
Tomas Janousek
5cdc98b8f5 rtc-dev: stop periodic interrupts on device release
Solves http://bugzilla.kernel.org/show_bug.cgi?id=11127

The old rtc.c driver did it and some drivers (like rtc-sh) do it in their
release function, though they should not -- because they should provide
the irq_set_state op and the rtc framework itself should care about it.
This patch makes it do so.

I am aware that some drivers, like rtc-sh, handle userspace PIE sets in
their ioctl op (instead of having the framework call the op), exporting
the irq_set_state op at the same time.  The logic in rtc_irq_set_state
should make sure it doesn't matter and the driver should not need to care
stopping periodic interrupts in its release routine any more.

The correct way, in my opinion, should be this:
1) The driver provides the irq_set_state op and does not care closing the
   interrupts in its release op.
2) If the driver does not provide the op and handles PIE in the ioctl op, it's
   reponsible for closing them in its release op.
3) Something similar for other IRQs, like UIE -- if there's no in-kernel API
   like irq_set_state, handle it in ioctl and release ops. The framework will
   be responsible either for everything or for nothing. (This will probably
   change later.)

Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:47 -07:00
David Brownell
b68bb26324 rtc: don't return -EBUSY when mutex_lock_interruptible() fails
It was pointed out that the RTC framework handles its mutex locks oddly
...  returning -EBUSY when interrupted.  This fixes that by returning the
value of mutex_lock_interruptible() (i.e.  -EINTR).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:45 -07:00
Yoichi Yuasa
4cad4431fc rtc-vr41xx: add irq_set_freq() and irq_set_state()
Implement the ioctls RTC_PIE_ON, RTC_PIE_OFF, RTC_IRQP_SET and
RTC_IRQP_READ in the standard RTC way.

Thanks Dave for noticing it.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
David Brownell
7e2a31da85 rtc-cmos: avoid spurious irqs
This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-cmos, in two ways:

  - When HPET is stealing the IRQs, use the first IRQ to grab
    the seconds counter which will be monitored (instead of
    using whatever was previously in that memory);

  - In sane IRQ handling modes, scrub out old IRQ status before
    enabling IRQs.

That latter is done by tightening up IRQ handling for rtc-cmos everywhere,
also ensuring that when HPET is used it's the only thing triggering IRQ
reports to userspace; net object shrink.

Also fix a bogus HPET message related to its RTC emulation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report-by: W Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
David Brownell
449321b39f rtc-at91rm9200: avoid spurious irqs
This fixes kernel http://bugzilla.kernel.org/show_bug.cgi?id=11112 (bogus
RTC update IRQs reported) for rtc-at91rm9200 by scrubbing old IRQ status
before enabling IRQs.

It also removes nonfunctional periodic IRQ support from this driver;
only update IRQs are reported, or provided by the hardware.

I suspect some other RTCs probably have versions of #11112; it's easy to
overlook, since most non-RTC drivers don't care about spurious IRQs:
they're not reported to userspace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Report-by: W Unruh <unruh@physics.ubc.ca>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
Ben Dooks
773be7ee97 rtc: rtc-s3c: update IRQ handling
The rtc-s3c.c driver has been using its own ioctl() handling to deal with
alarm and periodic interrupts to handle what should now be done with the
rtc core code.

Change to using the .irq_set_freq and .irq_set_state driver entries and
remove the .ioctl handling.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
Ben Dooks
4cd0c5c40b rtc: rtc-s3c: add __devexit and __devinit markers
Add the relevant __devinit and __devexit attributes to the rtc-s3c driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
David Brownell
35d3fdd5f3 rtc-cmos: improve HPET IRQ glue
Resolve http://bugzilla.kernel.org/show_bug.cgi?id=11051 and other bugs
related to the way the HPET glue code in rtc-cmos was incomplete and
inconsistent:

 * Switch the approach so that the basic driver code flow isn't
   changed by having HPET ... instead, just have HPET shadow the
   RTC_CONTROL irq enables and RTC_FREQ_SELECT data.  It's only
   coping with IRQ thievery, after all.

 * Do that consistently (!!) to avoid problems when the HPET code
   is out of sync with the real RTC intent.  Examples include:

   - cmos_procfs(), which now reports correct data

   - cmos_irq_set_state() ... also removing the previous PIE_{ON,OFF}
     ioctl support so only one code path manages "periodic" IRQs

   - cmos_do_shutdown() ... currently a "just in case" change.

   - cmos_suspend() and cmos_resume() ... also handling a bug that
     was specific to HPET's IRQ thievery, where the alarm wasn't
     disabled after waking the system

 * Always call that HPET code under the RTC spinlock (it doesn't do
   its own locking)

Also clean up the HPET glue:

 * Add some comments explaining what's going on.

 * Switch to having just one #ifdef for the HPET glue, and inline
   functions (not #defines) to avoid some compiler warnings.

 * Have the probe message also report when HPET IRQs are involved

This still leaves various holes in the HPET glue, like the emulated update
IRQs being out of sync with the RTC, alarms never using day or month
matches, and many extra IRQs (at 64 Hz).

[akpm@linux-foundation.org: fix build]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Carlos R. Mafra <crmafra@ift.unesp.br>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
Carlos R. Mafra
c68d07b2da rtc: remove and clarify unneeded externs
When CONFIG_HPET_EMULATE_RTC is defined the external declaration of
hpet_rtc_interrupt is redundant due to the inclusion of hpet.h.

When !CONFIG_HPET_EMULATE_RTC we make it clear that hpet_rtc_interrupt is
not used by defining it to return zero.

Signed-off-by: Carlos R. Mafra <crmafra@ift.unesp.br>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
Wolfram Sang
02bb584f3b rtc: convert the PCF8583 driver to the new I2C style framework with device_ids
Convert the PCF8583 driver to the new I2C style framework with device_ids

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:34 -07:00
David Brownell
71fc822455 rtc: rtc-omap footprint shrinkage
Shrink the runtime footprint of the OMAP1 RTC driver a bunch by removing
some old hacks and switching to platform_driver_probe().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:33 -07:00
David Brownell
53e84b672c rtc: ds1305/ds1306 driver
Support the Dallas/Maxim DS1305 and DS1306 RTC chips.  These use SPI, and
support alarms, NVRAM, and a trickle charger for use when their backup
power supply is a supercap or rechargeable cell.

This basic driver doesn't yet support suspend/resume or wakealarms.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:33 -07:00
Kim B. Heino
8fc2c767b0 rtc: add support for ST M41T94 SPI RTC
This patch adds kernel driver for M41T94 RTC chip connected via SPI.
I've tested it on two different AT91-based hardwares.

This is third revision of the patch: some comments made by
Alessandro Zummo fixed.

Revision two added support for century bit and fixes.

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:33 -07:00
David Brownell
5ad31a5751 rtc: remove BKL for ioctl()
Remove implicit use of BKL in ioctl() from the RTC framework.

Instead, the rtc->ops_lock is used.  That's the same lock that already
protects the RTC operations when they're issued through the exported
rtc_*() calls in drivers/rtc/interface.c ...  making this a bugfix, not
just a cleanup, since both ioctl calls and set_alarm() need to update IRQ
enable flags and that implies a common lock (which RTC drivers as a rule
do not provide on their own).

A new comment at the declaration of "struct rtc_class_ops" summarizes
current locking rules.  It's not clear to me that the exceptions listed
there should exist ...  if not, those are pre-existing problems which can
be fixed in a patch that doesn't relate to BKL removal.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:33 -07:00
Maciej W. Rozycki
4c228db0b3 rtc: m41t80: use pr_info() as appropriate
Replace printk(KERN_INFO ...) calls with appropriate pr_info(...)
equivalents.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:33 -07:00
Maciej W. Rozycki
35aa64f3a1 rtc: m41t80: sort header inclusions for readability
Sort the header inclusions for readability.  No functional changes.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:33 -07:00
Greg Kroah-Hartman
695794ae0c Driver Core: add ability for class_find_device to start in middle of list
This mirrors the functionality that driver_find_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:47 -07:00
Linus Torvalds
85082fd7cb Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits)
  [ARM] 5171/1: ep93xx: fix compilation of modules using clocks
  [ARM] 5133/2: at91sam9g20 defconfig file
  [ARM] 5130/4: Support for the at91sam9g20
  [ARM] 5160/1: IOP3XX: gpio/gpiolib support
  [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.
  [ARM] 5084/1: zylonite: Register AC97 device
  [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
  [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers
  [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting
  [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state
  [ARM] 5144/1: pxaficp_ir: cleanup includes
  [ARM] pxa: remove pxa_set_cken()
  [ARM] pxa: allow clk aliases
  [ARM] Feroceon: don't disable BPU on boot
  [ARM] Orion: LED support for HP mv2120
  [ARM] Orion: add RD88F5181L-FXO support
  [ARM] Orion: add RD88F5181L-GE support
  [ARM] Orion: add Netgear WNR854T support
  [ARM] s3c2410_defconfig: update for current build
  [ARM] Acer n30: Minor style and indentation fixes.
  ...
2008-07-14 16:06:58 -07:00
Linus Torvalds
d1794f2c5b Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits)
  IB/umad: BKL is not needed for ib_umad_open()
  IB/uverbs: BKL is not needed for ib_uverbs_open()
  bf561-coreb: BKL unneeded for open()
  Call fasync() functions without the BKL
  snd/PCM: fasync BKL pushdown
  ipmi: fasync BKL pushdown
  ecryptfs: fasync BKL pushdown
  Bluetooth VHCI: fasync BKL pushdown
  tty_io: fasync BKL pushdown
  tun: fasync BKL pushdown
  i2o: fasync BKL pushdown
  mpt: fasync BKL pushdown
  Remove BKL from remote_llseek v2
  Make FAT users happier by not deadlocking
  x86-mce: BKL pushdown
  vmwatchdog: BKL pushdown
  vmcp: BKL pushdown
  via-pmu: BKL pushdown
  uml-random: BKL pushdown
  uml-mmapper: BKL pushdown
  ...
2008-07-14 14:48:31 -07:00
Jonathan Corbet
2fceef397f Merge commit 'v2.6.26' into bkl-removal 2008-07-14 15:29:34 -06:00
Linus Torvalds
6c118e43dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (31 commits)
  avr32: Fix typo of IFSR in a comment in the PIO header file
  avr32: Power Management support ("standby" and "mem" modes)
  avr32: Add system device for the internal interrupt controller (intc)
  avr32: Add simple SRAM allocator
  avr32: Enable SDRAMC clock at startup
  rtc-at32ap700x: Enable wakeup
  macb: Basic suspend/resume support
  atmel_serial: Drain console TX shifter before suspending
  atmel_serial: Fix build on avr32 with CONFIG_PM enabled
  avr32: Use a quicklist for PTE allocation as well
  avr32: Use a quicklist for PGD allocation
  avr32: Cover the kernel page tables in the user PGDs
  avr32: Store virtual addresses in the PGD
  avr32: Remove useless zeroing of swapper_pg_dir at startup
  avr32: Clean up and optimize the TLB operations
  avr32: Rename at32ap.c -> pdc.c
  avr32: Move setup_platform() into chip-specific file
  avr32: Kill special exception handler sections
  avr32: Kill unneeded #include <asm/pgalloc.h> from asm/mmu_context.h
  avr32: Clean up time.c #includes
  ...
2008-07-14 13:37:29 -07:00
Jon Smirl
8ea9212cbd rtc-pcf8563: add chip id
Add the rtc8564 chip entry

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-12 14:33:42 -07:00
Alessandro Zummo
876550aa3e rtc-fm3130: fix chip naming
Fix chip naming from fm3031-rtc to fm3031

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-12 14:33:41 -07:00
Russell King
a177ba3b7a Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', 'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel 2008-07-10 16:38:50 +01:00
Michael Hamel
471d47e322 rtc-x1205: Fix alarm set
I have discovered that the current version of rtc-x1205.c does not work
correctly when asked to set the alarm time by the RTC_WKALM_SET ioctl()
call.  This happens because the alarm registers do not behave like the
current-time registers.  They are non-volatile.  Two things go wrong:

- the X1205 requires a 10 msec delay after any attempt to write to the
  non-volatile registers.  The x1205_set_datetime() routine does the write
  as 8 single-byte writes without any delay.  Only the first write
  succeeds.  The second is NAKed because the chip is busy.

- the X1205 resets the RWEL bit after any write to the non-volatile
  registers.  This would lock out any further writes after the first even
  with a 10msec delay.

I fix this by doing a single 8-byte write and then waiting 10msec for the
chip to be ready.  A side effect of this change is that it will speed up
x1205_rtc_set_time() which uses the same code.

I have also implemented the 'enable' bit in the rtc_wkalm structure, which
the existing driver does not attempt to do.  I have modified both
x1205_rtc_set_alarm() to set the AL0E bit, and x1205_rtc_read_alarm() to
return it.

I have tested this patch on a LinkSys NSLU2 under OpenWRT, but on no other
hardware.  On the NSLU2 the X1205 correctly asserts its IRQ pin when the
alarm time matches the current time.

[akpm@linux-foundation.org: clean up over-parenthesisation]
Signed-off-by: Michael Hamel <mhamel@adi.co.nz>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 10:40:05 -07:00
David Brownell
a01cc65703 rtc: rtc_read_alarm() handles wraparound
While 0e36a9a4a7 ("rtc: fix readback from
/sys/class/rtc/rtc?/wakealarm") made sure that active alarms were never
returned with invalid "wildcard" fields (negative), it can still report
(wrongly) that the alarm triggers in the past.

Example, if it's now 10am, an alarm firing at 5am will be triggered
TOMORROW not today.  (Which may also be next month or next year...)

This updates that alarm handling in three ways:

  * Handle alarm rollover in the common cases of RTCs that don't
    support matching on all date fields.

  * Skip the invalid-field logic when it's not needed.

  * Minor bugfix ... tm_isdst should be ignored, it's one of the
    fields Linux doesn't maintain.

A warning is emitted for some of the unhandled rollover cases, but the
possible combinations are a bit too numerous to handle every bit of
potential hardware and firmware braindamage.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Mark Lord <lkml@rtr.ca>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 10:40:04 -07:00
Arnd Bergmann
4101273535 rtc-rtc-m41t80: BKL pushdown
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-07-02 15:06:24 -06:00
Haavard Skinnemoen
f3a24e1e27 rtc-at32ap700x: Enable wakeup
Call device_init_wakeup() to signal that the RTC is capable of waking
the system. This is needed for rtcwake to work.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
2008-07-02 11:05:01 +02:00
Uli Luckas
e5a2c9ccb3 [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it
Mark rtc sa1100 driver as wakeup source before registering it.
rtc_device_register evaluates device_can_wakeup(rtc->dev.parent) and
supresses the creation of /sys/class/rtc/rtcX/wakealarm if
device_can_wakeup is not (yet) true.

Signed-off-by: Uli Luckas <u.luckas@road.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22 14:32:12 +01:00
Jonathan Corbet
51a776fa7a rtc: cdev lock_kernel() pushdown
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-06-20 14:03:43 -06:00
Sergey Lapin
c6d8f400cc rtc: Ramtron FM3130 RTC support
Ramtron FM3130 is a chip with two separate devices inside, RTC clock and
FRAM.  This driver provides only RTC functionality.

This chip is met in lots of custom boards with AT91SAMXXXX CPU I work
with, is cheap and in no way better or worse than any other RTC on market.
 While it is mostly met on much smaller devices, I think it is great to
have it supported in Linux.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-12 18:05:42 -07:00
Stas Sergeev
1da2e3d679 provide rtc_cmos platform device
Recently (around 2.6.25) I've noticed that RTC no longer works for me.  It
turned out this is because I use pnpacpi=off kernel option to work around
the parport_pc bugs.  I always did so, but RTC used to work fine in the
past, and now it have regressed.

The patch fixes the problem by creating the platform device for the RTC
when PNP is disabled.  This may also help running the PNP-enabled kernel
on an older PCs.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-12 18:05:42 -07:00
Haavard Skinnemoen
529a4f4ec9 rtc-at32ap700x: fix bug in at32_rtc_readalarm()
alarm->pending indicates whether there's an alarm that has actually been
triggered, not whether we're waiting for it.  alarm->enabled indicates
that.

Also add missing locking around reading the RTC registers.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-12 18:05:40 -07:00
David Woodhouse
aabe188565 rtc: class driver for ppc_md RTC functions
This hooks up the platform-specific [gs]et_rtc_time functions so that
kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms.

A new driver, and one which we've been shipping in Fedora for a while
already, since otherwise RTC support breaks.

[akpm@linux-foundation.org: fix Kconfig indenting]
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:13 -07:00
Jean Delvare
f2eb432715 rtc-ds1374: rename device to just "ds1374"
Change the name of the device from "rtc-ds1374" to just "ds1374", to match
what all other RTC drivers do.  I seem to remember that this name was
chosen to avoid possible confusion with an older ds1374 driver, but that
driver was removed 3 months ago.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:10 -07:00
Stelian Pop
6b71dbf65e [ARM] 4935/1: AT91CAP9: enable RTC-on-RTT in defconfig.
Update the help text for RTC_DRV_AT91SAM9 to mention that the
option apply to AT91CAP9 processors too, and enable it in the
defconfig.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02 15:08:11 +01:00
Russell King
797276ec9e [RTC] rtc-sa1100: remove dependence on asm/rtc.h
Move the two functions rtc-sa1100 wants from the old ARM RTC library
into the rtc-sa1100 driver.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:56:40 +01:00
Russell King
7da285b626 [RTC] remove unused asm/rtc.h includes from ARM RTC drivers
On ARM, asm/rtc.h only contains definitions for the predecessor to
the RTC class support.  RTC class drivers should not be including
this include.

Build tested on at91sam9rl and s3c2410 configurations.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:56:39 +01:00
Russell King
a190901c6b [RTC] rtc-pl030: add driver, remove old non-rtc lib driver
Convert Integrator PL030 RTC driver to use the RTC class interfaces.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:56:38 +01:00
Russell King
2dba8518b7 [RTC] rtc-pl031: use proper resources, use proper apis, clean up includes
Clean up PL031 RTC includes, make driver use proper resource checking,
and use amba bus specific accessors.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:56:36 +01:00
Russell King
f70c5253b4 [RTC] remove references to asm/mach/time.h
asm/mach/time.h is the ARM header file for setting up kernel ticker
timekeeping (be that the old jiffy interrupt or the new clocksource.)
RTC drivers have no business using this header file, and in fact do
not require it.

Build tested on at91sam9rl, omap and s3c2410 configurations.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:56:35 +01:00
Maciej W. Rozycki
9fb1f68d40 rtc: m41t80: include <linux/kernel.h> for printk()
The driver uses printk(), but does not include <linux/kernel.h> -- add it.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:26 -07:00
Maciej W. Rozycki
417607d05f RTC/watchdog: M41T80: fix a potential use of unitialized data
Watchdog handlers within the driver make use of "save_client" -- make sure it
has been initalized before the handlers are registered.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Bigga <ab@mycable.de>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:26 -07:00
Maciej W. Rozycki
945185a69d rtc: rtc_time_to_tm: use unsigned arithmetic
The input argument to rtc_time_to_tm() is unsigned as well as are members of
the output structure.  However signed arithmetic is used within for
calculations leading to incorrect results for input values outside the signed
positive range.  If this happens the time of day returned is out of range.

Found the problem when fiddling with the RTC and the driver where year was set
to an unexpectedly large value like 2070, e.g.:

rtc0: setting system clock to 2070-01-01 1193046:71582832:26 UTC (3155760954)

while it should be:

rtc0: setting system clock to 2070-01-01 00:15:54 UTC (3155760954)

Changing types to unsigned fixes the problem.

[akpm@linux-foundation.org: remove old-fashioned `register' keyword]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:25 -07:00
Jean Delvare
60b129d7bf i2c: Match dummy devices by type
As the old driver_name/type matching scheme is going away soon, change
the dummy device mechanism to use the new matching scheme.

This has the downside that dummy i2c clients can no longer choose
their name, they'll all appear as "dummy" in sysfs and in log
messages. I don't think it is a problem in practice though, as there
is little reason to use these i2c clients to log messages.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-11 20:37:06 +02:00
Linus Torvalds
a9545ee3c8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits)
  SH: catch negative denormal_subf1() retval in denormal_add()
  sh: Fix DMAC base address for SH7709S
  sh: update smc91x platform data for se7206.
  sh: Stub in cpu_to_node() and friends for NUMA build.
  sh: intc register modify fix
  sh: no high level trigger on some sh3 cpus
  sh: clean up sh7710 and sh7720 intc tables
  sh: add interrupt ack code to sh3
  sh: unify external irq pin code for sh3
  sh-sci: avoid writing to nonexistent registers
  sh-sci: sh7722 lacks scsptr registers
  sh-sci: improve sh7722 support
  sh: reset hardware from early printk
  sh: drain and wait for early printk
  sh: use sci_out() for early printk
  sh: add memory resources to /proc/iomem
  sh: add kernel bss resource
  sh: fix sh7705 interrupt vector typo
  sh: update smc91x platform data for se7722
  sh: update smc91x platform data for MigoR
  ...
2008-05-09 08:07:58 -07:00
Steven Rostedt
9a0f4aea87 fix irq flags in rtc-ds1511
The file in drivers/rtc/rtc-ds1551.c uses "int" for flags.  This can cause
hard to find bugs on some architectures.  This patch converts the flags to use
"long" instead.

This bug was discovered by doing an allyesconfig make on the -rt kernel where
checks are done to ensure all flags are of size sizeof(long).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 10:46:55 -07:00
Paul Mundt
0305794c7a rtc: rtc-sh: Fixup for 64-bit resources.
ioremap() and friends get the size information right, so force everything
to go through there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:45 +09:00
Linus Torvalds
08acd4f8af Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (179 commits)
  ACPI: Fix acpi_processor_idle and idle= boot parameters interaction
  acpi: fix section mismatch warning in pnpacpi
  intel_menlo: fix build warning
  ACPI: Cleanup: Remove unneeded, multiple local dummy variables
  ACPI: video - fix permissions on some proc entries
  ACPI: video - properly handle errors when registering proc elements
  ACPI: video - do not store invalid entries in attached_array list
  ACPI: re-name acpi_pm_ops to acpi_suspend_ops
  ACER_WMI/ASUS_LAPTOP: fix build bug
  thinkpad_acpi: fix possible NULL pointer dereference if kstrdup failed
  ACPI: check a return value correctly in acpi_power_get_context()
  #if 0 acpi/bay.c:eject_removable_drive()
  eeepc-laptop: add hwmon fan control
  eeepc-laptop: add backlight
  eeepc-laptop: add base driver
  ACPI: thinkpad-acpi: bump up version to 0.20
  ACPI: thinkpad-acpi: fix selects in Kconfig
  ACPI: thinkpad-acpi: use a private workqueue
  ACPI: thinkpad-acpi: fluff really minor fix
  ACPI: thinkpad-acpi: use uppercase for "LED" on user documentation
  ...

Fixed conflicts in drivers/acpi/video.c and drivers/misc/intel_menlow.c
manually.
2008-04-30 11:52:52 -07:00
Jean Delvare
3760f73671 i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>
2008-04-29 23:11:40 +02:00