Commit Graph

11279 Commits

Author SHA1 Message Date
Duncan Sands
6275cdfa0f [PATCH] USBATM: fix modinfo output
Because of the way stringify works, using an expression
like 64 * 1024 for UDSL_MAX_BUF_SIZE results in 64 * 1024
turning up in the modinfo output instead of 65536.  So use
65536 directly (this was the only way I found of fixing this).

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:54 -07:00
Duncan Sands
67c752b41a [PATCH] USBATM: change the default speedtouch iso altsetting
The maximum possible bandwidth for a speedtouch modem is about 7Mbaud.
You can only get this by using isochronous urbs (enable_isoc=1) and
altsetting 3.  With the current default altsetting of 2, the modem
maxes out at about 4Mbaud.  So change the default altsetting to 3
when using isochronous urbs.  It would be nice to base the altsetting
on the detected line speed, but that's hard given the current design.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:54 -07:00
David Brownell
839ab1d4ce [PATCH] USB: fix bug in ohci-hcd.c ohci_restart()
A loop on a power-lost resume path used the wrong index.
I suspect khubd has been working around such bugs.
Noticed by Andreas Mohr <andi@rhlx01.fht-esslingen.de>.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:54 -07:00
Andi Kleen
6810b548b2 [PATCH] x86_64: Move ondemand timer into own work queue
Taking the cpu hotplug semaphore in a normal events workqueue
is unsafe because other tasks can wait for any workqueues with
it hold. This results in a deadlock.

Move the DBS timer into its own work queue which is not
affected by other work queue flushes to avoid this.

Has been acked by Venkatesh.

Cc: venkatesh.pallipadi@intel.com
Cc: cpufreq@lists.linux.org.uk
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08 09:34:56 -07:00
Linus Torvalds
96b8eaa14a Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IRDA] irda-usb: use NULL instead of 0
  [IPV4]: Remove likely in ip_rcv_finish()
  [NET]: Create netdev attribute_groups with class_device_add
  [CLASS DEVICE]: add attribute_group creation
2006-05-08 09:11:10 -07:00
Linus Torvalds
bed7a56033 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: Do not overwrite makefile as anohter user
  kbuild: drivers/video/logo/ - fix ident glitch
  kbuild: fix gen_initramfs_list.sh
  kbuild modpost - relax driver data name
  kbuild: removing .tmp_versions considered harmful
  kbuild: fix modpost segfault for 64bit mipsel kernel
2006-05-08 09:10:44 -07:00
Randy Dunlap
0eb1bd210d [IRDA] irda-usb: use NULL instead of 0
Use NULL instead of 0 for a null pointer value (sparse warning):

drivers/net/irda/irda-usb.c:1781:30: warning: Using plain integer as NULL pointer

Also, correct timeout argument to use milliseconds instead of jiffies.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-06 18:34:10 -07:00
Stephen Hemminger
1498221d51 [CLASS DEVICE]: add attribute_group creation
Extend the support of attribute groups in class_device's to allow
groups to be created as part of the registration process. This allows
network device's to avoid race between registration and creating
groups.

Note that unlike attributes that are a property of the class object,
the groups are a property of the class_device object. This is done
because there are different types of network devices (wireless for
example).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-06 17:55:11 -07:00
Russell King
f12267011d [ARM] rtc-sa1100: fix compiler warnings and error cleanup
Fix:
drivers/rtc/rtc-sa1100.c: In function `sa1100_rtc_proc':
drivers/rtc/rtc-sa1100.c:298: warning: unsigned int format, long unsigned int arg (arg 3)

and arrange for sa1100_rtc_open() to pass the devid to free_irq()
rather than NULL.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-06 11:29:21 +01:00
Linus Torvalds
d98550e334 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: Use the ibm,pa-features property if available
  powerpc: Fix incorrect might_sleep in __get_user/__put_user on kernel addresses
  [PATCH] ppc32 CPM_UART: fixes and improvements
  [PATCH] ppc32 CPM_UART: Fixed break send on SCC
  [PATCH] powerpc/kprobes: fix singlestep out-of-line
  [PATCH] powerpc/pseries: avoid crash in PCI code if mem system not up
2006-05-04 15:09:52 -07:00
Linus Torvalds
f9cc8475e7 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3490/1: i.MX: move uart resources to board files
  [ARM] 3488/1: make icedcc_putc do the right thing
  [ARM] 3487/1: IXP4xx: Support non-PCI systems
  [ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros
2006-05-04 14:52:43 -07:00
Linus Torvalds
6fc56ccfe4 Merge master.kernel.org:/home/rmk/linux-2.6-mmc
* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Move set_ios debugging into mmc.c
  [MMC] Correct mmc_request_done comments
  [MMC] PXA: reduce the number of lines PXAMCI debug uses
  [MMC] PXA and i.MX: don't avoid sending stop command on error
  [MMC] extend data timeout for writes
  [ARM] 3485/1: i.MX: MX1 SD/MMC fix of unintentional double start possibility
2006-05-04 14:52:27 -07:00
Linus Torvalds
936ef1d48a Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [DECNET]: Fix level1 router hello
  [TCP]: Fix sock_orphan dead lock
  [ROSE]: Eleminate HZ from ROSE kernel interfaces
  [NETROM]: Eleminate HZ from NET/ROM kernel interfaces
  [AX.25]: Eleminate HZ from AX.25 kernel interfaces
  [ROSE]: Fix routing table locking in rose_remove_neigh.
  [AX.25]: Move AX.25 symbol exports
  [HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.
  [AX25, ROSE]: Remove useless SET_MODULE_OWNER calls.
  [AX.25]: Spelling fix
  [ROSE]: Remove useless prototype for rose_remove_neigh().
  [NETFILTER]: x_tables: don't use __copy_{from,to}_user on unchecked memory in compat layer
  [NETFILTER]: H.323 helper: Change author's email address
  [NETFILTER]: NAT: silence unused variable warnings with CONFIG_XFRM=n
  [NETFILTER]: H.323 helper: fix use of uninitialized data
  [NETFILTER]: H.323 helper: fix endless loop caused by invalid TPKT len
2006-05-04 13:25:19 -04:00
Russell King
920e70c5c6 [MMC] Move set_ios debugging into mmc.c
Rather than having every driver duplicate the set_ios debugging,
provide a single version in mmc.c which can be expanded as we
add additional functionality.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-04 18:22:51 +01:00
Sascha Hauer
5b80234435 [ARM] 3490/1: i.MX: move uart resources to board files
Patch from Sascha Hauer

This patch moves the i.MX uart resources and the gpio pin setup to the
board files. This allows the boards to decide how many internal uarts
are connected to the outside world and whether they use rts/cts or
not.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-04 14:07:42 +01:00
Russell King
fe10c6abea [MMC] Correct mmc_request_done comments
mmc_request_done should be called at the end of handling a request, not
between the data and initial command parts of the request.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-04 13:51:45 +01:00
Ralf Baechle DL5RB
3ab33dcc82 [HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-03 23:24:35 -07:00
Brent Casavant
8683dc9990 [PATCH] Altix: correct ioc4 port order
Currently loading the ioc3 as a module will cause the ports to be numbered
in reverse order.  This mod maintains the proper order of cards for port
numbering.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Cc: Pat Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-03 20:05:41 -07:00
mark gross
96941026a5 [PATCH] EDAC Coexistence with BIOS
Address the issue of EDAC/BIOS coexistence for the e752x chip-sets.

We have found a problem where the BIOS will start the system with the error
registers (dev0:fun1) hidden and assuming it has exclusive access to them.
The edac driver violates this assumption.

The workaround this patch offers is to honor the hidden-ness as an
indication that it is not safe to use those registers.

Signed-off-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-03 20:05:41 -07:00
Vitaly Bordug
6e1976961c [PATCH] ppc32 CPM_UART: fixes and improvements
A number of small issues are fixed, and added the header file, missed from the
original series. With this, driver should be pretty stable as tested among
both platform-device-driven and "old way" boards. Also added missing GPL
statement , and updated year field on existing ones to reflect
code update.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-03 23:06:44 +10:00
Vitaly Bordug
61f5657c50 [PATCH] ppc32 CPM_UART: Fixed break send on SCC
SCC uart sends a break sequence each time it is stopped with the
CPM_CR_STOP_TX command. That means that each time an application closes the
serial device, a break is transmitted. To fix this, graceful tx stop is
issued for SCC.

Signed-off-by: David Jander <david.jander@protonic.nl>
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-03 23:06:43 +10:00
Ayaz Abdulla
ebf34c9b6f forcedeth: fix multi irq issues
This patch fixes the issues with multiple irqs.

I am resending based on feedback. I decoupled the dma mask for
consistent memory and fixed leak with multiple irq in error path.

Thanks to Manfred for catching the spin lock problem.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
2006-05-02 15:26:06 -04:00
Craig Brind
3e0d167a6b [PATCH] via-rhine: zero pad short packets on Rhine I ethernet cards
Fixes Rhine I cards disclosing fragments of previously transmitted frames
in new transmissions.

Before transmission, any socket buffer (skb) shorter than the ethernet
minimum length of 60 bytes was zero-padded.  On Rhine I cards the data can
later be copied into an aligned transmission buffer without copying this
padding.  This resulted in the transmission of the frame with the extra
bytes beyond the provided content leaking the previous contents of this
buffer on to the network.

Now zero-padding is repeated in the local aligned buffer if one is used.

Following a suggestion from the via-rhine maintainer, no attempt is made
here to avoid the duplicated effort of padding the skb if it is known that
an aligned buffer will definitely be used.  This is to make the change
"obviously correct" and allow it to be applied to a stable kernel if
necessary.  There is no change to the flow of control and the changes are
only to the Rhine I code path.

The patch has run on an in-service Rhine-I host without incident.  Frames
shorter than 60 bytes are now correctly zero-padded when captured on a
separate host.  I see no unusual stats reported by ifconfig, and no unusual
log messages.

Signed-off-by: Craig Brind <craigbrind@gmail.com>
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02 15:21:52 -04:00
Olaf Hering
b0b8dab288 [PATCH] mv643xx_eth: provide sysfs class device symlink
On Sat, Mar 11, Olaf Hering wrote:
> Why is the /sys/class/net/eth0/device symlink not created for the
> mv643xx_eth driver? Does this work for other platform device drivers?
> Seems to work for the ps2 keyboard at least.

The SET_NETDEV_DEV has to be done before a call to register_netdev.  With
the new patch below, the device symlink for the platform device was
created.  Unfortunately, after the 4 ls commands, the network connection
died.  No idea if the box crashed or if something else broke, lost remote
access.

Provide sysfs 'device' in /class/net/ethN Also, set module owner field,
like pcnet32 driver does.

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-02 15:18:54 -04:00
Russell King
d78e9079af [MMC] PXA: reduce the number of lines PXAMCI debug uses
There's no reason for the PXAMCI debug code to print so many lines - it
causes the kernel buffer to overflow when trying to debug this driver.
Remove some debug messages which are duplicated by core code, and
combine other messages, resulting in fewer characters written to the
kernel log.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-02 20:18:53 +01:00
Russell King
58741e8b36 [MMC] PXA and i.MX: don't avoid sending stop command on error
Always send a stop command at the end of a data transfer.  If we avoid
sending the stop command, some cards remain in data transfer mode, and
refuse to accept further read/write commands.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-02 20:02:39 +01:00
Russell King
37be4e7809 [MMC] extend data timeout for writes
The CSD contains a "read2write factor" which determines the multiplier to
be applied to the read timeout to obtain the write timeout.  We were
ignoring this parameter, resulting in the possibility for writes being
timed out too early.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-02 17:24:59 +01:00
Linus Torvalds
cf105601df Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: tidy up white space in a few files
  IB/ipath: fix label name in interrupt handler
  IB/ipath: improve sparse annotation
  IB/ipath: simplify IB timer usage
  IB/ipath: simplify RC send posting
  IB/ipath: prevent hardware from being accessed during reset
  IB/ipath: fix verbs registration
  IB/ipath: change handling of PIO buffers
  IB/ipath: iterate over correct number of ports during reset
  IB/ipath: set up 32-bit DMA mask if 64-bit setup fails
  IB/ipath: fix race with exposing reset file
  IB/mthca: Fix offset in query_gid method
2006-05-01 18:26:31 -07:00
Atsushi Nemoto
f3537ea7b9 [PATCH] genrtc: fix read on 64-bit platforms
Fix genrtc's read() routine for 64-bit platforms.  Current gen_rtc_read()
stores 64bit integer and returns 8 even if an user tried to read a 32bit
integer.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:47 -07:00
Atsushi Nemoto
3418ff7611 [PATCH] RTC: rtc-dev tweak for 64-bit kernel
Make rtc-dev work well on 64-bit platforms with 32-bit userland.  On those
platforms, users might try to read 32-bit integer value.  This patch make
rtc-dev's read() work well for both "int" and "long" size.  This tweak is came
from genrtc driver.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:46 -07:00
Heiko Carstens
022e4fc0fb [PATCH] s390: fix ipd handling
As pointed out by Paulo Marques <pmarques@grupopie.com> MAX_IPD_TIME is by
a factor of ten too small.  Since this means that we allow ten times more
IPDs in the intended time frame this could result in a cpu check stop of a
physical cpu.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:46 -07:00
Pat Gefre
2c43630fb0 [PATCH] Altix: correct ioc3 port order
Currently loading the ioc3 as a module will cause the ports to be numbered
in reverse order.  This mod maintains the proper order of cards for port
numbering.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:45 -07:00
NeilBrown
5e7dd2ab6b [PATCH] md: Fix 'rdev->nr_pending' count when retrying barrier requests
When retrying a failed BIO_RW_BARRIER request, we need to keep the reference
in ->nr_pending over the whole retry.  Currently, we only hold the reference
if the failed request is the *last* one to finish - which is silly, because it
would normally be the first to finish.

So move the rdev_dec_pending call up into the didn't-fail branch.  As the rdev
isn't used in the later code, calling rdev_dec_pending earlier doesn't hurt.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:42 -07:00
NeilBrown
62de608da0 [PATCH] md: Improve detection of lack of barrier support in raid1
Move the test for 'do barrier work' down a bit so that if the first write to a
raid1 is a BIO_RW_BARRIER write, the checking done by superblock writes will
cause the right thing to happen.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:42 -07:00
NeilBrown
bea2771871 [PATCH] md: Change ENOTSUPP to EOPNOTSUPP
Because that is what you get if a BIO_RW_BARRIER isn't supported!

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:42 -07:00
NeilBrown
e0a33270ed [PATCH] md: Fixed refcounting/locking when attempting read error correction in raid10
We need to hold a reference to rdevs while reading and writing to attempt to
correct read errors.  This reference must be taken under an rcu lock.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:42 -07:00
NeilBrown
df30d0f4ca [PATCH] md: Avoid oops when attempting to fix read errors on raid10
We should add to the counter for the rdev *after* checking if the rdev is
NULL!!!

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:42 -07:00
Bastian Blank
235acec78e [PATCH] s390: make qeth buildable
Signed-off-by: Bastian Blank <bastian@waldi.eu.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01 18:17:42 -07:00
Bryan O'Sullivan
f6f0413e10 IB/ipath: tidy up white space in a few files
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:23 -07:00
Bryan O'Sullivan
d562a5ae69 IB/ipath: fix label name in interrupt handler
Names that are the opposite of their intended meanings are not so helpful.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:22 -07:00
Bryan O'Sullivan
ae15f540cc IB/ipath: improve sparse annotation
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:21 -07:00
Bryan O'Sullivan
9b2017f1e1 IB/ipath: simplify IB timer usage
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:21 -07:00
Bryan O'Sullivan
76f0dd141b IB/ipath: simplify RC send posting
Remove some unnecessarily complicated tests.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:20 -07:00
Bryan O'Sullivan
c71c30dcba IB/ipath: prevent hardware from being accessed during reset
The reset code now turns off the PRESENT flag during a reset, so that
other code won't attempt to access a device that's in mid-reset.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:16 -07:00
Bryan O'Sullivan
fccea66364 IB/ipath: fix verbs registration
Remember when the verbs layer unregisters from the lower-level code.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:15 -07:00
Bryan O'Sullivan
52e7fad825 IB/ipath: change handling of PIO buffers
Different ipath hardware types have different numbers of buffers
available, so we decide on the counts ourselves unless we are specifically
overridden with a module parameter.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:14 -07:00
Bryan O'Sullivan
23e86a4584 IB/ipath: iterate over correct number of ports during reset
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:13 -07:00
Bryan O'Sullivan
68dd43a162 IB/ipath: set up 32-bit DMA mask if 64-bit setup fails
Some systems do not set up 64-bit maps on systems with 2GB or less of
memory installed, so we have to fall back to trying a 32-bit setup.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:12 -07:00
Bryan O'Sullivan
755e4ca4a9 IB/ipath: fix race with exposing reset file
We were accidentally exposing the "reset" sysfs file more than once
per device.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 12:14:11 -07:00
Roland Dreier
254abfd33a IB/mthca: Fix offset in query_gid method
GuidInfo records have 8 byte GUIDs in them, so an index should be
multiplied by 8 to get an offset.  mthca_query_gid() was incorrectly
multiplying by 16.

Noticed by Leonid Keller <leonid@mellanox.co.il>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01 10:40:23 -07:00