Commit Graph

16 Commits

Author SHA1 Message Date
Andrew Morton
6a94f92097 [PATCH] ipmi: add 32-bit ioctl translations for 64-bit platforms
)

From: Corey Minyard <minyard@acm.org>

This contains the patch for supporting 32-bit compatible ioctls on x86_64
systems.  The current x86_64 driver will not work with 32-bit applications.

Signed-off-by: Jordan Hargave <jordan_hargrave@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:24 -07:00
Corey Minyard
77cf3973f2 [PATCH] ipmi: use completions, not semaphores, in powerdown code
Don't use semaphores for IPC in the poweroff code, use completions instead.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:23 -07:00
Corey Minyard
3b6259432d [PATCH] ipmi: add power cycle capability
This patch to adds "power cycle" functionality to the IPMI power off module
ipmi_poweroff.  It also contains changes to support procfs control of the
feature.

The power cycle action is considered an optional chassis control in the IPMI
specification.  However, it is definitely useful when the hardware supports
it.  A power cycle is usually required in order to reset a firmware in a bad
state.  This action is critical to allow remote management of servers.

The implementation adds power cycle as optional to the ipmi_poweroff module.
It can be modified dynamically through the proc entry mentioned above.  During
a power down and enabled, the power cycle command is sent to the BMC firmware.
 If it fails either due to non-support or some error, it will retry to send
the command as power off.

Signed-off-by: Christopher A. Poblete <Chris_Poblete@dell.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:23 -07:00
Corey Minyard
8f43f84f13 [PATCH] ipmi: timer shutdown cleanup
Clean up the timer shutdown handling in the IPMI driver.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:23 -07:00
Zaur Kambarov
3a845099b2 [PATCH] coverity: ipmi: avoid overrun of ipmi_interfaces[]
Fix overrun of static array "ipmi_interfaces" of size 4 at position 4 with
index variable "if_num".

Definitions involved:
297  	#define MAX_IPMI_INTERFACES 4
298  	static ipmi_smi_t ipmi_interfaces[MAX_IPMI_INTERFACES];

Signed-off-by: Zaur Kambarov <zkambarov@coverity.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:11 -07:00
Andrew Morton
eb51b65005 [PATCH] fix up ipmi code after class_simple.c removal
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:12 -07:00
Neil Horman
dca79a046b [PATCH] ipmi build fix
It looks like the recent IPMI patches had some -mm-onlyisms.

Signed-off-by: Neil Horman <nhorman@redhat.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-25 15:31:27 -07:00
Corey Minyard
37e0915b70 [PATCH] Add sysfs support for the IPMI device interface
Add support for sysfs to the IPMI device interface.

Clean-ups based on Dimitry Torokovs comment by Philipp Hahn.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Philipp Hahn <pmhahn@titan.lahn.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20 07:58:04 -07:00
Al Viro
1b75d8ba5e [PATCH] ipmi iomem annotations and fixes
annotated, a bunch of direct dereferencing replaced with readb().

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04 07:33:15 -07:00
Corey Minyard
882fe011a9 [PATCH] ipmi: fix a deadlock
Correct an issue with the IPMI message layer taking a lock and calling
lower layer driver.  If an error occrues at the lower layer the lock can be
taken again causing a deadlock.  The lock is released before calling the
lower layer.

Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Corey Minyard
9dbf68f97d [PATCH] ipmi: enable interrupts on the BT driver
Enable interrupts for a BT interface.  There is a specific register that
needs to be set up to enable interrupts that also must be modified to clear
the irq.

Also, don't reset the BMC on a BT interface.  That's probably not a good
idea as the BMC may be performing other important functions and a reset
should only be a last resort.  Also, that register is also used to
enable/disable interrupts to the BT; modifying it may screw up the
interrupts.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:11 -07:00
Corey Minyard
ec26d79f4f [PATCH] ipmi: fix watchdog so the device can be reopened on an unexpected close
If there is an unexpected close, still allow the watchdog interface to be
re-opened on the IPMI watchdog.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:11 -07:00
Corey Minyard
35bc37a0e0 [PATCH] IPMI: fix for handling bad ACPI data
If the ACPI register bit width is zero (an invalid value) assume it is the
default spacing.  This avoids some coredumps on invalid data and makes some
systems work that have broken ACPI data.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:10 -07:00
Corey Minyard
9206880198 [PATCH] IPMI: fix for handling bad IPMI DMI data
Ignore the bottom bit of the base address from the DMI data.  It is
supposed to be set to 1 if it is I/O space.  Few systems do this, but this
enables the ones that do set it to work properly.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:10 -07:00
Paul E. McKenney
fbd568a3e6 [PATCH] Change synchronize_kernel to _rcu and _sched
This patch changes calls to synchronize_kernel(), deprecated in the earlier
"Deprecate synchronize_kernel, GPL replacement" patch to instead call the new
synchronize_rcu() and synchronize_sched() APIs.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:04 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00