Check ubwc_config for not being NULL before
dereferencing.
Change-Id: Ia4c87ea4a0e963b33165b0ea9a9c39339cc65832
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Add new ioctl to query the supported ROI map type.
Based on vpu version, report whether support 2-bit type
ROI map, or 2-byte type ROI map.
Change-Id: I6db970f5f36e4cc61365867c2a07d63aaf9365ea
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
For hevc codec, LCU sizes are 32x32 or 64x64. Existing
capabilities consider alignment with 16. Considering a
hevc clip of dimension 4096x2160, the coded resolution
becomes 4096x2176. Limiting the cap with 4096x2160 will
break such usecase, hence keeping the capabilities
considering 32-byte alignment.
Change-Id: I505843878f177c63b88959f92ce3a7d5a06b996b
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
-Fix to add 4 extra dcvs buffers at encoder input and decoder
output side irrespective of fps and resolution.
-Decrease total encoder input buffer count from 16 to 8 for non-hfr
use-cases.
-Increase total encoder output buffer count for hfr use-cases
irrespective of resolution.
Change-Id: I2fcda6e8c93bcc0df8c3168049ebf4a60e6bb5f1
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Input buffer counts, ie Dec Bitstream and Enc Yuv,
depend on input resolution. Hence they should be recalculated
in set format. Stale values can result in excess memory usage.
CRs-Fixed: 2548727
Change-Id: I57c87270a6613da290f14484897cef16e964e27a
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Increase vpp cycles by 2% for 1080P@HSR480 encode
usecase so that the video core runs at higher
frequency(366Mhz) helping to achieve the desired
performance.
Change-Id: Id81abd36ab79067d52da9371d1dd5bdcfe622389
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
make changes in video driver to make it as module.
Change-Id: I00788a1b72cc799f655b16e1bc6b7d6d6e0441f9
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Reject the buffer device address mapping when the device
address is mapped in secure context bank for a non-secure
instance and for the converse as well.
Change-Id: Ic2fc578acd23d3582b390b24cc9d829d49d00d4d
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
For secure encoding case, there is no camera usage. Hence,
by default make number of planes as 1. If any input requires
extradata, client will enable it and driver will update
number of planes.
Change-Id: Id9afd0a286a53d5d4c6045ba58227f57a0a8e0ca
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Fix to add condition to skip mbpf capability checking
for HEIF image encoding.
Change-Id: Ife323366b8c08040c3f6fab8a0d15b89fe6f6777
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Default buffer count will not be sufficient for HFR(fps > 480).
So recalculate buffer count, if fps is updated before calling
vidioc_reqbuf.
Change-Id: Iec792892d283072f064c4148c65560b6a7e31d45
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Set CABAC as the default entropy mode for h264.
Also, check profile settings to ensure that CABAC mode
is set only for applicable profiles.
Change-Id: Id5e67c1a7ac0862ea963312ebdaee58945bf8bc0
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Increase total input buffers used for HFR cases. Required
for smooth performance.
Change-Id: Ia7dd49ead71239c2fb669e016d5e9fd2f94ca862
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
DCVS scaling window should be equal to the additional buffers
allocated for DCVS and independent of the buffer count required
by Client and FW.
CRs-Fixed: 2527739
Change-Id: I665a3d9792f44ea031d6c8d05d6e7a546a22f9a8
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
SKU index is not applicable for all targets. Hence no need
to keep it mandatory. SKU related changes will happen only
when the property is present otherwise will default to 0.
Change-Id: I88076ea95bccd4130202c055e5c148d817dd302e
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add new DDR type 5X and deprecate DDR type 4Y.
Macro values also changed.
CRs-Fixed: 2534324
Change-Id: I0412b4e624df9c377db18b635d2cde321fccf8d0
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Currently setting signal_info, only if colorspace info
is set properly. But sometimes client can set only range.
So need to send signal_info always to firmware.
Change-Id: I5282ec01b473485ec39f39abbf7160b9c5cc0256
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Eos buffer is queued to firmware and its ref is maintained
using eosbufs.list. Sometimes EOS request client sent even
before port_reconfig. In that case requeing same buffer
which is already with firmware at start_streaming. So during
handle_ebd of 2nd eos buffer, it can't find the entry at
eosbufs.list. So client closes the session.
Always check, if buffer is already queued, then do not queue
the same buffer again, during start_streaming after reconfig.
Change-Id: If934d8ce357226dee78db15ccb7b3c57103d2f12
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
When set color format constraints, one buffer is not
correctly freed, fix it.
Change-Id: Iad497f03981653a7f28524f1d9e4218f706dcca1
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
gki needs video driver as module and hence compile
video driver for qgki variant only.
Change-Id: I6e25c5c7651e02df35c40ac1b27a8a61e3110530
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Initialize port format type to avoid failure
when g_fmt is called before s_fmt.
Change-Id: I37758f6d8be766c75cc8bc97147312b3b0bb0915
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Current location is cleaning up all the existing header files
in usr/include/media directory before installing video specific
header files and hence change video specific header files location.
Kbuild files are not required anymore so remove Kbuild files.
Change-Id: I217d0652be9b2811ef1c6df64bf4143c9bcd1bd3
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add Lahaina-specific platform data needed for driver probe
and remove data for older platforms.
Change-Id: I35e7711fd024467f0b6ce40aabdaf71f0c523e9a
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Initialize device_caps with device capabilities before video
devices are registered, as required by V4L2 framework.
Change-Id: I9fc037ae65d352b15d78eee979df30a24137dea8
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
ar50 and iris1 are no longer used.
Deleting the unused code pieces and files.
Change-Id: I01fab64b5e3682338fc0ffab986e7807a74c37b5
Signed-off-by: Karthikeyan Periasamy <kperiasa@codeaurora.org>
- msm-bus API is deprecated in favor of upstream interconnect API
- Migrate all msm-bus functions to interconnect (icc) API
- Remove msm-bus sub-device probing and parse interconnect fields from
msm-vidc device tree
Change-Id: Ibf08c52e001c5fde7e30d2aedbd3456a270f5b6c
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
- Made the changes in video module to compile successfully.
- Removed cvp and v4l2 private files.
Change-Id: Iaf5f29d6042a87d5b96b1fa4abb985ee3e592f0e
Signed-off-by: Karthikeyan Periasamy <kperiasa@codeaurora.org>
