Commit Graph

723 Commits

Author SHA1 Message Date
Tiger Yang
6c3faba442 ocfs2: add ocfs2_xattr_set_handle
This function is used to set xattr's in a started transaction. It is only
called during inode creation inode for initial security/acl xattrs of the
new inode. These xattrs could be put into ibody or extent block, so xattr
bucket would not be use in this case.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tiger Yang
f5d362022a ocfs2: move new inode allocation out of the transaction
Move out inode allocation from ocfs2_mknod_locked() because
vfs_dq_init() must be called outside of a transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Mark Fasheh
fecc01126d ocfs2: turn __ocfs2_remove_inode_range() into ocfs2_remove_btree_range()
This patch genericizes the high level handling of extent removal.
ocfs2_remove_btree_range() is nearly identical to
__ocfs2_remove_inode_range(), except that extent tree operations have been
used where necessary. We update ocfs2_remove_inode_range() to use the
generic helper. Now extent tree based structures have an easy way to
truncate ranges.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-01-05 08:34:19 -08:00
Tao Ma
85db90e778 ocfs2/xattr: Merge xattr set transaction.
In current ocfs2/xattr, the whole xattr set is divided into
many steps are many transaction are used, this make the
xattr set process isn't like a real transaction, so this
patch try to merge all the transaction into one. Another
benefit is that acl can use it easily now.

I don't merge the transaction of deleting xattr when we
remove an inode. The reason is that if we have a large number
of xattrs and every xattrs has large values(large enough
for outside storage), the whole transaction will be very
huge and it looks like jbd can't handle it(I meet with a
jbd complain once). And the old inode removal is also divided
into many steps, so I'd like to leave as it is.

Note:
In xattr set, I try to avoid ocfs2_extend_trans since if
the credits aren't enough for the extension, it will commit
all the dirty blocks and create a new transaction which may
lead to inconsistency in metadata. All ocfs2_extend_trans
remained are safe now.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tao Ma
78f30c314a ocfs2/xattr: Reserve meta/data at the beginning of ocfs2_xattr_set.
In ocfs2 xattr set, we reserve metadata and clusters in any place
they are needed. It is time-consuming and ineffective, so this
patch try to reserve metadata and clusters at the beginning of
ocfs2_xattr_set.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tao Ma
c73f60f900 ocfs2/xattr: Move clusters free into dealloc.
Move clusters free process into dealloc context so that
they can be freed after the transaction.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tao Ma
2891d290aa ocfs2: Add clusters free in dealloc_ctxt.
Now in ocfs2 xattr set, the whole process are divided into many small
parts and they are wrapped into diffrent transactions and it make the
set doesn't look like a real transaction. So we want to integrate it
into a real one.

In some cases we will allocate some clusters and free some in just one
transaction. e.g, one xattr is larger than inline size, so it and its
value root is stored within the inode while the value is outside in a
cluster. Then we try to update it with a smaller value(larger than the
size of root but smaller than inline size), we may need to free the
outside cluster while allocate a new bucket(one cluster) since now the
inode may be full. The old solution will lock the global_bitmap(if the
local alloc failed in stress test) and then the truncate log. This will
cause a ABBA lock with truncate log flush.

This patch add the clusters free in dealloc_ctxt, so that we can record
the free clusters during the transaction and then free it after we
release the global_bitmap in xattr set.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Tao Ma
976331d878 ocfs2/xattr: Only extend xattr bucket in need.
When the first block of a bucket is filled up with xattr
entries, we normally extend the bucket. But if we are
just replace one xattr with small length, we don't need
to extend it. This is important since we will calculate
what we need before the transaction and in this situation
no resources will be allocated.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Tao Ma
757055adc5 ocfs2/xattr: Only set buffer update if it doesn't exist in cache.
When we call ocfs2_init_xattr_bucket, we deem that the new buffer head
will be written to disk immediately, so we just use sb_getblk. But in
some cases the buffer may have already been in ocfs2 uptodate cache,
so we only call ocfs2_set_buffer_uptodate if the buffer head isn't
in the cache.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Tao Ma
1c32a2fd46 ocfs2/xattr: Remove additional bucket allocation in bucket defragment.
Joel has refactored xattr bucket and make xattr bucket a general
wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the
bucket in, so there is no need to allocate a new one and read it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
02dbf38d19 ocfs2: Use buckets in ocfs2_xattr_set_entry_in_bucket().
The ocfs2_xattr_set_entry_in_bucket() function is already working on an
ocfs2_xattr_bucket structure, so let's use the bucket API.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
161d6f30f1 ocfs2: Use buckets in ocfs2_defrag_xattr_bucket().
Use the ocfs2_xattr_bucket abstraction for reading and writing the
bucket in ocfs2_defrag_xattr_bucket().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
178eeac354 ocfs2: Use buckets in ocfs2_xattr_create_index_block().
Use the ocfs2_xattr_bucket abstraction in
ocfs2_xattr_create_index_block() and its helpers.  We get more efficient
reads, a lot less buffer_head munging, and nicer code to boot.  While
we're at it, ocfs2_xattr_update_xattr_search() becomes void.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
e2356a3f02 ocfs2: Use buckets in ocfs2_xattr_bucket_find().
Change the ocfs2_xattr_bucket_find() function to use ocfs2_xattr_bucket
as its abstraction.  This makes for more efficient reads, as buckets are
linear blocks, and also has improved caching characteristics.  It also
reads better.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:17 -08:00
Joel Becker
ba93712759 ocfs2: Take ocfs2_xattr_bucket structures off of the stack.
The ocfs2_xattr_bucket structure is a nice abstraction, but it is a bit
large to have on the stack.  Just like ocfs2_path, let's allocate it
with a ocfs2_xattr_bucket_new() function.

We can now store the inode on the bucket, cleaning up all the other
bucket functions.  While we're here, we catch another place or two that
wasn't using ocfs2_read_xattr_bucket().

Updates:
- No longer allocating xis.bucket, as it will never be used.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:17 -08:00
Joel Becker
4980c6daba ocfs2: Copy xattr buckets with a dedicated function.
Now that the places that copy whole buckets are using struct
ocfs2_xattr_bucket, we can do the copy in a dedicated function.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:17 -08:00
Joel Becker
1224be020f ocfs2: Wrap journal_access/journal_dirty for xattr buckets.
A common action is to call ocfs2_journal_access() and
ocfs2_journal_dirty() on the buffer heads of an xattr bucket.  Let's
create nice wrappers.

While we're there, let's drop the places that try to be smart by writing
only the first and last blocks of a bucket.  A bucket is contiguous, so
writing the whole thing is actually more efficient.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:17 -08:00
Joel Becker
784b816a91 ocfs2: Improve ocfs2_read_xattr_bucket().
The ocfs2_read_xattr_bucket() function would read an xattr bucket into a
list of buffer heads.  However, we have a nice ocfs2_xattr_bucket
structure.  Let's have it fill that out instead.

In addition, ocfs2_read_xattr_bucket() would initialize buffer heads for
a bucket that's never been on disk before.  That's confusing.  Let's
call that functionality ocfs2_init_xattr_bucket().

The functions ocfs2_cp_xattr_bucket() and ocfs2_half_xattr_bucket() are
updated to use the ocfs2_xattr_bucket structure rather than raw bh
lists.  That way they can use the new read/init calls.  In addition,
they drop the wasted read of an existing target bucket.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:17 -08:00
Joel Becker
6dde41d9e7 ocfs2: Provide a wrapper to brelse() xattr bucket buffers.
A common theme is walking all the buffer heads on an ocfs2_xattr_bucket
and releasing them.  Let's wrap that.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:17 -08:00
Joel Becker
3e6329463e ocfs2: Convenient access to an xattr bucket's header.
The xattr code often wants to access the ocfs2_xattr_header at the start
of an bucket.  Rather than walk the pointer chains, let's just create
another nice macro.  As a side benefit, we can get rid of the mostly
spurious ->bu_xh element on the bucket structure.  The idea is ripped
from the ocfs2_path code.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:16 -08:00
Joel Becker
51def39f0c ocfs2: Convenient access to xattr bucket data blocks.
The xattr code often wants to access the data pointer for blocks in an
xattr bucket.  This is usually found by dereferencing the bh array
hanging off of the ocfs2_xattr_bucket structure.  Rather than do this
all the time, let's provide a nice little macro.  The idea is ripped
from the ocfs2_path code.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:16 -08:00
Joel Becker
9c7759aa67 ocfs2: Convenient access to an xattr bucket's block number.
The xattr code often wants to know the block number of an xattr bucket.
This is usually found by dereferencing the first bh hanging off of the
ocfs2_xattr_bucket structure.  Rather than do this all the time, let's
provide a nice little macro.  The idea is ripped from the ocfs2_path
code.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:16 -08:00
Joel Becker
4ac6032d6c ocfs2: Field prefixes for the xattr_bucket structure
The ocfs2_xattr_bucket structure keeps track of the buffers for one
xattr bucket.  Let's prefix the fields for easier code navigation.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:16 -08:00
Linus Torvalds
0191b625ca Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28 12:49:40 -08:00
James Morris
cbacc2c7f0 Merge branch 'next' into for-linus 2008-12-25 11:40:09 +11:00
Joel Becker
a97721894a ocfs2: Add JBD2 compat feature bit.
Define the OCFS2_FEATURE_COMPAT_JBD2 bit in the filesystem header.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-16 18:26:16 -08:00
Tao Ma
83099bc647 ocfs2: Always update xattr search when creating bucket.
When we create xattr bucket during the process of xattr set, we always
need to update the ocfs2_xattr_search since even if the bucket size is
the same as block size, the offset will change because of the removal
of the ocfs2_xattr_block header.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-16 14:07:37 -08:00
James Morris
ec98ce480a Merge branch 'master' into next
Conflicts:
	fs/nfsd/nfs4recover.c

Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().

Signed-off-by: James Morris <jmorris@namei.org>
2008-12-04 17:16:36 +11:00
David S. Miller
aa2ba5f108 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/ixgbe/ixgbe_main.c
	drivers/net/smc91x.c
2008-12-02 19:50:27 -08:00
Mark Fasheh
d6b58f89f7 ocfs2: fix regression in ocfs2_read_blocks_sync()
We're panicing in ocfs2_read_blocks_sync() if a jbd-managed buffer is seen.
At first glance, this seems ok but in reality it can happen. My test case
was to just run 'exorcist'. A struct inode is being pushed out of memory but
is then re-read at a later time, before the buffer has been checkpointed by
jbd. This causes a BUG to be hit in ocfs2_read_blocks_sync().

Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-01 14:46:58 -08:00
Coly Li
07d9a3954a ocfs2: fix return value set in init_dlmfs_fs()
In init_dlmfs_fs(), if calling kmem_cache_create() failed, the code will use return value from
calling bdi_init(). The correct behavior should be set status as -ENOMEM before going to "bail:".

Signed-off-by: Coly Li <coyli@suse.de>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-01 14:46:55 -08:00
David Teigland
07f9eebcdf ocfs2: fix wake_up in unlock_ast
In ocfs2_unlock_ast(), call wake_up() on lockres before releasing
the spin lock on it.  As soon as the spin lock is released, the
lockres can be freed.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-01 14:46:45 -08:00
David Teigland
66f502a416 ocfs2: initialize stack_user lvbptr
The locking_state dump, ocfs2_dlm_seq_show, reads the lvb on locks where it
has not yet been initialized by a lock call.

Signed-off-by: David Teigland <teigland@redhat.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-01 14:46:39 -08:00
Coly Li
3b5da0189c ocfs2: comments typo fix
This patch fixes two typos in comments of ocfs2.

Signed-off-by: Coly Li <coyli@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-01 14:46:31 -08:00
James Morris
2b82892565 Merge branch 'master' into next
Conflicts:
	security/keys/internal.h
	security/keys/process_keys.c
	security/keys/request_key.c

Fixed conflicts above by using the non 'tsk' versions.

Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 11:29:12 +11:00
David Howells
b19c2a3b83 CRED: Wrap task credential accesses in the OCFS2 filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:38:59 +11:00
David S. Miller
7e452baf6b Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/message/fusion/mptlan.c
	drivers/net/sfc/ethtool.c
	net/mac80211/debugfs_sta.c
2008-11-11 15:43:02 -08:00
Tiger Yang
6c1e183e12 ocfs2: Check search result in ocfs2_xattr_block_get()
ocfs2_xattr_block_get() calls ocfs2_xattr_search() to find an external
xattr, but doesn't check the search result that is passed back via struct
ocfs2_xattr_search. Add a check for search result, and pass back -ENODATA if
the xattr search failed. This avoids a later NULL pointer error.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Mark Fasheh
de29c08528 ocfs2: fix printk related build warnings in xattr.c
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Dmitri Monakhov
c435400140 ocfs2: truncate outstanding block after direct io failure
Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Tao Ma
80bcaf3469 ocfs2/xattr: Proper hash collision handle in bucket division
In ocfs2/xattr, we must make sure the xattrs which have the same hash value
exist in the same bucket so that the search schema can work. But in the old
implementation, when we want to extend a bucket, we just move half number of
xattrs to the new bucket. This works in most cases, but if we are lucky
enough we will move 2 xattrs into 2 different buckets. This means that an
xattr from the previous bucket cannot be found anymore. This patch fix this
problem by finding the right position during extending the bucket and extend
an empty bucket if needed.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Tao Ma
4c1bbf1ba6 ocfs2: return 0 in page_mkwrite to let VFS retry.
In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping
isn't updated, and it will cause the user space program get SIGBUS and
exit. The reason is that during race writeable mmap, we will do
unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is
that if we reuturn 0 in page_mkwrite, VFS will retry fault and then
call page_mkwrite again, so it is safe to return 0 here.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Sunil Mushran
ae0dff6830 ocfs2: Set journal descriptor to NULL after journal shutdown
Patch sets journal descriptor to NULL after the journal is shutdown.
This ensures that jbd2_journal_release_jbd_inode(), which removes the
jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode()
even after the journal has been shutdown.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Tao Ma
d32647993c ocfs2: Fix check of return value of ocfs2_start_trans() in xattr.c.
On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM),
so we should check whether handle is NULL. Fix them to use IS_ERR().
Jan has made the patch for other part in ocfs2(thank Jan for it), so
this is just the fix for fs/ocfs2/xattr.c.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:47 -08:00
Jan Kara
b99835c168 ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails
We forgot to set i_nlink to 0 when returning due to error from ocfs2_mknod_locked()
and thus inode was not properly released via ocfs2_delete_inode() (e.g. claimed
space was not released). Fix it.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:46 -08:00
Jan Kara
87cfa00432 ocfs2: Fix checking of return value of new_inode()
new_inode() does not return ERR_PTR() but NULL in case of failure. Correct
checking of the return value.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:46 -08:00
Jan Kara
fa38e92cb3 ocfs2: Fix check of return value of ocfs2_start_trans()
On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM).
Thus checks for !handle are wrong. Fix them to use IS_ERR().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:46 -08:00
Tao Ma
8573f79d30 ocfs2: Fix some typos in xattr annotations.
Fix some typos in the xattr annotations.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:46 -08:00
Tao Ma
63fd775737 ocfs2: Remove unused ocfs2_restore_xattr_block().
Since now ocfs2 supports empty xattr buckets, we will never remove
the xattr index tree even if all the xattrs are removed, so this
function will never be called. So remove it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:46 -08:00
Joel Becker
54f443f4e7 ocfs2: Don't repeat ocfs2_xattr_block_find()
ocfs2_xattr_block_get() looks up the xattr in a startlingly familiar
way; it's identical to the function ocfs2_xattr_block_find().  Let's just
use the later in the former.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-11-10 09:51:46 -08:00