It need rx chainmask to select noise floor when start spectral gen3
scan and rx data by DMA. So set rx chainmask before start spectral
scan.
Change-Id: I63efd8f5384537b5697ba809bb05fdd17e243210
CRs-Fixed: 2519366
Spectral tool is required to compatible with different version of
spectral, so add version information in SPECTRAL_SCAN_REGISTER_RSP.
Change-Id: Id766d95463e511209c752a428761fe7f1380c53e
CRs-Fixed: 2495259
Populate vdev mlme obj and dest chain with vdev start req for
vdev_mgr_start_send.
Remove vdev_start_params from wma_vdev_start.
Remove vdev_mgr_start_param_populate.
Change-Id: I8606441341344fbcd181facf4000942ff94ac00d
CRs-Fixed: 2516590
Do not enable AMSDU Rx by advertising advertises AMSDUSUPPPORTED=0
in ADD_BA response if the connection is on 2.4Ghz.
Change-Id: I1c61ce9f3824a600fbd5123680b7d00ae7659438
CRs-Fixed: 2519746
Currently the driver is not included the VHT capability
on 2.4ghz band if gEnableVhtFor24GHzBand ini is enabled.
As a result the driver is not advertising the VHT support
on 2.4ghz band in wiphy per band info even gEnableVhtFor24GHzBand
ini is enabled.
To resolve this, add VHT capability in the wiphy for 2.4ghz
Change-Id: If36b0ad9bf546e54542485637a99c1ee82b1850e
CRs-Fixed: 2495337
Vdev start failure handling in SAP and STA and not handled
properly and thus VDEV SM doesn't move to INIT state and
lead to asserts.
Change-Id: I5ea09f9c6e84a2e1c7f9254319aaa1a11e2f97e8
CRs-Fixed: 2526179
On HST, service bit wmi_service_hw_db2dbm_support is set, need
send target hirssi_upper_bound as RSSI format instead of SNR.
Change-Id: Ie9029e9c26f84456722ca2864a28c7ba3a2be52d
CRs-Fixed: 2485833
Printing the tx queue stats on to the console in
the timer context causes a watchdog bark due to
excessive logging.
Reduce the log level for the stats dumping
from timer context.
CRs-Fixed: 2522067
Change-Id: Ic8162fabf552f6e5103427298229385d68dbbfbb
Pointer hdd_ctx returned from the call to function cds_get_context may be
NULL and will be dereferenced. Move the recording of timing of runtime
PM operations to after validation of hdd_ctx.
Change-Id: I5da02c3fdb695be25bf0b59f4fe33e599e751d03
CRs-Fixed: 2524971
Currently the driver does not check if the state
is key exchange in progress and suspends wlan
before set-key happens which further results in
FW also in wake up state.
This would result in delayed EAP exchange, and also
in power loss.
Scenario:-
1. Turn on STA and try to connect to enterprise network
2. Turn off display.
Here the display turn off would trigger APPS suspend
while the STA is trying to connect, and authenticate
and since there is no check in driver to prevent
suspend in set key in progress state, it would result
in a FW assert, as the expectation of FW is to allow
suspend only after set key has been done.
Fix is to prevent WLAN-suspend in case of connection
in progress, and allow suspend only in connected
and authenticated state.
Change-Id: Ic173116f7ba424005d938a43c75831a6a4dc874c
CRs-Fixed: 2512866
If the firmware gets compromised, the values sent to
the driver could result in buffer overflows.
Validate HTT MSG "msg_word" to avoid buffer overflows.
Change-Id: I6073029f61a358da32bcc0dcfc339d9bb7ee8218
CRs-Fixed: 2213659
Initialize mic work for QDF_FTM_MODE in
hdd_open_adapter to avoid touching uninitialized
lock in hdd_mic_flush_work as part of hdd_stop_adapter.
Change-Id: I280de93b2408acba4da363ecd292f811f6301d31
CRs-Fixed: 2523654
To pass WFA 11N 4.2.25 case, it's needed to enable legacy mode
SIFS burst. So add INI to make SIFS burst mode configurable.
Change-Id: I740fe33a7ae0d9b558aa3b3aeee434f482ed24cb
CRs-Fixed: 2486171
Devide wma_add_bss_sta_mode into 4 functions for 4 cases:
1. wma_pre_assoc_req, called before sta assoc, config vdev
params.
2. wma_send_peer_assoc_req, called after sta associated, send
peer assoc cmd to F/W.
3. LFR3 add bss
4. LFR2 add bss and vdev start
Lim will call these functions directly instead of post msg to
wma.
Replace lim_set_link_state with wma_add_bss_peer_sta to create
peer for LFR2 roaming.
Clean up all link state usless code now.
Change-Id: I6ad19bb92e7b0334704ac9c930277e9c35abbee2
CRs-Fixed: 2510119
Currently, the connection_in_progress flag in hdd_ctx is not reset
as part of SSR this can lead to scan reject after SSR.
Change-Id: Icc7889eb3140f02dd100d05e812d5573ebcae63c
CRs-Fixed: 2516937
Switch legacy vdev up to vdev mgr/target if vdev up
Remove wakelock since it is handled in target if.
Clean up legacy vdev up API.
Change-Id: I125b202e9a18ee3bf279fe4df7bc17b9ec7bf999
CRs-Fixed: 2516586
In Genoa SDIO ADMA implementation Host sends packets to FW in
multiples of SDIO Block size.
If the packet/bundle is not block aligned Host adds padding at the
end of Packet/Bundle.
If the TX packet plus padding exceeds one FW TX Buffer, Padding data
will occupy the next FW TX buffer. Same applies for bundle TX packet.
For above scenario, HTC_FLAGS_PADDING_CHECK of HTC header Flags is used
to notify the FW that - Padding data follows the currentHTC packet
Since the padding data will take one extra FW Tx Buffer, host need to
handle the extra Tx credit being used by the padding data/buffer
CRs-Fixed: 2516619
Change-Id: Ie2d2292fabb30e1a13eebe4d11b57f452e42afa8
ANI_AKM_TYPE_SAE is defined only when WLAN_FEATURE_SAE defined.
But it is used without any checking in function lim_check_wpa_rsn_ie().
If WLAN_FEATURE_SAE is disabled, build error will occur.
It is easy to fix it to add '#ifdef WLAN_FEATURE_SAE' in function
lim_check_wpa_rsn_ie(). But coding rule, '#ifdef WLAN_FEATURE_SAE' isn't
allowed to occur in function. So, move '(*akm_type == ANI_AKM_TYPE_SAE)'
to function lim_check_sae_pmf_cap().
Change-Id: Id62bc69d770dbd4e470d8fa379b4cb3f7447d9dc
CRs-Fixed: 2508071
With vdev operations moved to target if from the wma, the vdev
request hold framework is not used.
Thus remove the unused functions and structures
Change-Id: I6e609735ad0bdc8b929cfffa6f13915f0ad6823d
CRs-Fixed: 2523104
In function hdd_softap_set_channel_change, vdev is passed to
function wlan_vdev_mlme_get_opmode without taking reference.
This can lead to NULL pointer access.
Change-Id: Ibbc58a1e7a4be0e0e34982b99541a63cd77e0480
CRs-Fixed: 2518560
