The previous commit (45c18b0bb5, aka "Fix
unlikely (but possible) race condition on task->user access") fixed a
potential oops due to __sigqueue_alloc() getting its "user" pointer out
of sync with switch_user(), and accessing a user pointer that had been
de-allocated on another CPU.
It still left another (much less serious) problem, where a concurrent
__sigqueue_alloc and swich_user could cause sigqueue_alloc to do signal
pending reference counting for a _different_ user than the one it then
actually ended up using. No oops, but we'd end up with the wrong signal
accounting.
Another case of Oleg's eagle-eyes picking up the problem.
This is trivially fixed by just making sure we load whichever "user"
structure we decide to use (it doesn't matter _which_ one we pick, we
just need to pick one) just once.
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's a possible race condition when doing a "switch_uid()" from one
user to another, which could race with another thread doing a signal
allocation and looking at the old thread ->user pointer as it is freed.
This explains an oops reported by Lukasz Trabinski:
http://permalink.gmane.org/gmane.linux.kernel/462241
We fix this by delaying the (reference-counted) freeing of the user
structure until the thread signal handler lock has been released, so
that we know that the signal allocation has either seen the new value or
has properly incremented the reference count of the old one.
Race identified by Oleg Nesterov.
Cc: Lukasz Trabinski <lukasz@wsisiz.edu.pl>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is needed on bigendian 64bit architectures.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a swsusp debugging mode. This does everything that's needed for a suspend
except for actually suspending. So we can look in the log messages and work
out a) what code is being slow and b) which drivers are misbehaving.
(1)
# echo testproc > /sys/power/disk
# echo disk > /sys/power/state
This should turn off the non-boot CPU, freeze all processes, wait for 5
seconds and then thaw the processes and the CPU.
(2)
# echo test > /sys/power/disk
# echo disk > /sys/power/state
This should turn off the non-boot CPU, freeze all processes, shrink
memory, suspend all devices, wait for 5 seconds, resume the devices etc.
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Stefan Seyfried <seife@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Apparently FUTEX_FD is unfixably racy and nothing uses it (or if it does, it
shouldn't).
Add a warning printk, give any remaining users six months to migrate off it.
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
printk_ratelimit() has global state which makes it not useful for callers
which wish to perform ratelimiting at a particular frequency.
Add a printk_timed_ratelimit() which utilises caller-provided state storage to
permit more flexibility.
This function can in fact be used for things other than printk ratelimiting
and is perhaps poorly named.
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If there are no listeners, taskstats_exit_send() just returns because
taskstats_exit_alloc() didn't allocate *tidstats. This is wrong, each
sub-thread should do fill_tgid_exit() on exit, otherwise its ->delays is
not recorded in ->signal->stats and lost.
Q: We don't send TASKSTATS_TYPE_AGGR_TGID when single-threaded process
exits. Is it good? How can the listener figure out that it was actually a
process exit, not sub-thread?
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Shailabh Nagar <nagar@watson.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paranoid fix. The task can free its ->mm after the 'if (p->mm)' check.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For ndiswrapper, don't set the module->taints flags, just set the kernel
global tainted flag. This should allow ndiswrapper to continue to use GPL
symbols.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Florin Malita <fmalita@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
prepare_reply() adds GENL_HDRLEN to the payload (genlmsg_total_size()),
but then it does genlmsg_put()->nlmsg_put(). This means we forget to
reserve a room for 'struct nlmsghdr'.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
'return genlmsg_cancel()' in taskstats_user_cmd/taskstats_exit_send
potentially leaks a skb. Unless we pass 'rep_skb' to the netlink layer
we own sk_buff. This means we should always do kfree_skb() on failure.
[ Thomas acked and pointed out missing return value in original version ]
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Thomas Graf <tgraf@suug.ch>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch (as812) changes the kerneldoc comments explaining the return
values from queue_work(), queue_delayed_work(), and
queue_delayed_work_on(). The updated comments explain more accurately the
meaning of the return code and avoid suggesting that a 0 value means the
routine was unsuccessful.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
_cpu_down() acquires `workqueue_mutex' on its process, but doen't release it
if __cpu_disable() fails.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I notice that the code which implements adjtime clears the time_adjust
value before using it. The attached patch makes the obvious fix.
Acked-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Jim Houston <jim.houston@ccur.com>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
fill_tgid() should skip not only an already exited group leader. If the
task has ->exit_state != 0 it already did exit_notify(), so it also did
fill_tgid_exit()->delayacct_add_tsk(->signal->stats) and we should skip it
to avoid a double accounting.
This patch doesn't close the race completely, but it cleanups the code.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove tasklist_lock from taskstats.c. find_task_by_pid() is rcu-safe.
->siglock allows us to traverse subthread without tasklist.
Q: delay accounting looks wrong to me. If sub-thread has already called
taskstats_exit_send() but didn't call release_task(self) yet it will be
accounted twice. The window is big. No?
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
signal_struct is (mostly) protected by ->sighand->siglock, I think we don't
need ->taskstats_lock to protect ->stats. This also allows us to simplify the
locking in fill_tgid().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
taskstats_tgid_free() is called on copy_process's error path. This is wrong.
IF (clone_flags & CLONE_THREAD)
We should not clear ->signal->taskstats, current uses it,
it probably has a valid accumulated info.
ELSE
taskstats_tgid_init() set ->signal->taskstats = NULL,
there is nothing to free.
Move the callsite to __exit_signal(). We don't need any locking, entire
thread group is exiting, nobody should have a reference to soon to be
released ->signal.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1. ts = timespec_sub(uptime, current->group_leader->start_time);
It is possible that current != tsk. Probably it was supposed
to be 'tsk->group_leader->start_time. But why we are reading
group_leader's start_time ? This accounting is per thread,
not per procees, I changed this to 'tsk->start_time.
Please corect me.
2. stats->ac_ppid = (tsk->parent) ? tsk->parent->pid : 0;
tsk->parent never == NULL, and it is unsafe to dereference it.
Both the task and it's parent may exit after the caller unlocks
tasklist_lock, the memory could be unmapped (DEBUG_SLAB).
(And we should use ->real_parent->tgid in fact).
Q: I don't understand the 'if (thread_group_leader(tsk))' check.
Why it is needed ?
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Acked-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1. fill_tgid() forgets to do put_task_struct(first).
2. release_task(first) can happen after fill_tgid() drops tasklist_lock,
it is unsafe to dereference first->signal.
This is a temporary fix, imho the locking should be reworked.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This means we can call it when the bitmap we want to fetch is declared
const.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This changes the dwarf2 unwinder to do a binary search for CIEs
instead of a linear work. The linker is unfortunately not
able to build a proper lookup table at link time, instead it creates
one at runtime as soon as the bootmem allocator is usable (so you'll continue
using the linear lookup for the first [hopefully] few calls).
The code should be ready to utilize a build-time created table once
a fixed linker becomes available.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
If CONFIG_PROC_FS=n:
kernel/sysctl.c:148: warning: 'proc_do_cad_pid' used but never defined
kernel/built-in.o:(.data+0x1228): undefined reference to `proc_do_cad_pid'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The use of blocking notifier by _cpu_up and _cpu_down in cpu.c has two
problem.
1/ An interaction with the workqueue notifier causes lockdep to spit a
warning.
2/ A notifier could conceivable be added or removed while _cpu_up or
_cpu_down are in process. As each notifier is called twice (prepare
then commit/abort) this could be unhealthy.
To fix to we simply take cpu_add_remove_lock while adding or removing
notifiers to/from the list.
This makes the 'blocking' usage unnecessary as all accesses to cpu_chain
are now protected by cpu_add_remove_lock. So change "blocking" to "raw" in
all relevant places. This fixes 1.
Credit: Andrew Morton
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> (reporter)
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
BUG: warning at kernel/rtmutex-debug.c:125/rt_mutex_debug_task_free() (Not tainted)
[<c04051e3>] show_trace_log_lvl+0x58/0x16a
[<c04057f0>] show_trace+0xd/0x10
[<c0405900>] dump_stack+0x19/0x1b
[<c043f03d>] rt_mutex_debug_task_free+0x35/0x6a
[<c04224c0>] free_task+0x15/0x24
[<c042378c>] copy_process+0x12bd/0x1324
[<c0423835>] do_fork+0x42/0x113
[<c04021dd>] sys_fork+0x19/0x1b
[<c0403fb7>] syscall_call+0x7/0xb
In copy_process(), dup_task_struct() also duplicates the ->pi_lock,
->pi_waiters and ->pi_blocked_on members. rt_mutex_debug_task_free()
called from free_task() validates these members. However free_task() can
be invoked before these members are reset for the new task.
Move the initialization code before the first bail that can hit free_task().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce desc->name and eliminate the handle_irq_name() hack. Add
set_irq_chip_and_handler_name() to set the flow type and name at once.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
My fancy new swsusp IO code had a big memory leak. It's somewhat invisible
because the whole mem_map[] gets overwritten after resume, but it can cause us
to get low on memory during the actual suspend process.
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The integer divisions in the timer accounting code can round the result
down to 0. Adding 0 is without effect and the signal delivery stops.
Clamp the division result to minimum 1 to avoid this.
Problem was reported by Seongbae Park <spark@google.com>, who provided
also an inital patch.
Roland sayeth:
I have had some more time to think about the problem, and to reproduce it
using Toyo's test case. For the record, if my understanding of the problem
is correct, this happens only in one very particular case. First, the
expiry time has to be so soon that in cputime_t units (usually 1s/HZ ticks)
it's < nthreads so the division yields zero. Second, it only affects each
thread that is so new that its CPU time accumulation is zero so now+0 is
still zero and ->it_*_expires winds up staying zero. For the VIRT and PROF
clocks when cputime_t is tick granularity (or the SCHED clock on
configurations where sched_clock's value only advances on clock ticks), this
is not hard to arrange with new threads starting up and blocking before they
accumulate a whole tick of CPU time. That's what happens in Toyo's test
case.
Note that in general it is fine for that division to round down to zero,
and set each thread's expiry time to its "now" time. The problem only
arises with thread's whose "now" value is still zero, so that now+0 winds up
0 and is interpreted as "not set" instead of ">= now". So it would be a
sufficient and more precise fix to just use max(ticks, 1) inside the loop
when setting each it_*_expires value.
But, it does no harm to round the division up to one and always advance
every thread's expiry time. If the thread didn't already fire timers for
the expiry time of "now", there is no expectation that it will do so before
the next tick anyway. So I followed Thomas's patch in lifting the max out
of the loops.
This patch also covers the reload cases, which are harder to write a test
for (and I didn't try). I've tested it with Toyo's case and it fixes that.
[toyoa@mvista.com: fix: min_t -> max_t]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Daniel Walker <dwalker@mvista.com>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Seongbae Park <spark@google.com>
Cc: Peter Mattis <pmattis@google.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avoid possible PIT livelock issues seen on SMP systems (and reported by
Andi), by not allowing it as a clocksource on SMP boxes.
However, since the PIT may no longer be present, we have to properly handle
the cases where SMP systems have TSC skew and fall back from the TSC.
Since the PIT isn't there, it would "fall back" to the TSC again. So this
changes the jiffies rating to 1, and the TSC-bad rating value to 0.
Thus you will get the following behavior priority on i386 systems:
tsc [if present & stable]
hpet [if present]
cyclone [if present]
acpi_pm [if present]
pit [if UP]
jiffies
Rather then the current more complicated:
tsc [if present & stable]
hpet [if present]
cyclone [if present]
acpi_pm [if present]
pit [if cpus < 4]
tsc [if present & unstable]
jiffies
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In general, lockdep warnings are intended to be non-fatal, so I have put in
various practical limits on internal data structure failure modes. We haven't
had a /single/ lockdep-internal crash ever since lockdep went upstream [the
unwinder crashes are outside of lockdep], and that's largely due to the good
internal checks it does.
Recursion within the dependency graph is currently limited to 20, that's
probably not enough on some many-CPU boxes - this patch doubles it to 40. I
have written the lockdep functions to have as small stackframes as possible,
so 40 should be OK too. (The practical recursion limit should be somewhere
between 100 and 200 entries. If we hit that then I'll change the algorithm to
be iteration-based. Graph walking logic is so easy to program via recursion,
so i'd like to keep recursion as long as possible.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7371
sys_epoll_pwait needs to be listed as a conditional (weak)
entry point for CONFIG_EPOLL=n.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bug reported and fixed by Tilman Schmidt <tilman@imap.cc>: if lockdep is
enabled then log messages make it to /var/log/messages belatedly. The
reason is a missed wakeup of klogd.
Initially there was only a lockdep_internal() protection against lockdep
recursion within vprintk() - it grew the 'outer' lockdep_off()/on()
protection only later on. But that lockdep_off() made the
release_console_sem() within vprintk() always happen under the
lockdep_internal() condition, causing the bug.
The right solution to remove the inner protection against recursion here -
the outer one is enough.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
lib/bitmap.c:bitmap_parse() is a library function that received as input a
user buffer. This seemed to have originated from the way the write_proc
function of the /proc filesystem operates.
This has been reworked to not use kmalloc and eliminates a lot of
get_user() overhead by performing one access_ok before using __get_user().
We need to test if we are in kernel or user space (is_user) and access the
buffer differently. We cannot use __get_user() to access kernel addresses
in all cases, for example in architectures with separate address space for
kernel and user.
This function will be useful for other uses as well; for example, taking
input for /sysfs instead of /proc, so it was changed to accept kernel
buffers. We have this use for the Linux UWB project, as part as the
upcoming bandwidth allocator code.
Only a few routines used this function and they were changed too.
Signed-off-by: Reinette Chatre <reinette.chatre@linux.intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This likely profiling is pretty fun. I found a few possible problems
in sched.c.
This patch may be not measurable, but when I did measure long ago,
nooping (un)likely cost a couple of % on scheduler heavy benchmarks, so
it all adds up.
Tweak some branch hints:
- the 2nd 64 bits in the bitmask is likely to be populated, because it
contains the first 28 bits (nearly 3/4) of the normal priorities.
(ratio of 669669:691 ~= 1000:1).
- it isn't unlikely that context switching switches to another process. it
might be very rapidly switching to and from the idle process (ratio of
475815:419004 and 471330:423544). Let the branch predictor decide.
- preempt_enable seems to be very often called in a nested preempt_disable
or with interrupts disabled (ratio of 3567760:87965 ~= 40:1)
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Daniel Walker <dwalker@mvista.com>
Cc: Hua Zhong <hzhong@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Module taint flags listing in Oops/panic has a couple of issues:
* taint_flags() doesn't null-terminate the buffer after printing the flags
* per-module taints are only set if the kernel is not already tainted
(with that particular flag) => only the first offending module gets its
taint info correctly updated
Some additional changes:
* 'license_gplok' is no longer needed - equivalent to !(taints &
TAINT_PROPRIETARY_MODULE) - so we can drop it from struct module *
exporting module taint info via /proc/module:
pwc 88576 0 - Live 0xf8c32000
evilmod 6784 1 pwc, Live 0xf8bbf000 (PF)
Signed-off-by: Florin Malita <fmalita@gmail.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Switch the memory policy of the kevent threads to MPOL_DEFAULT while
leaving the kzalloc of the workqueue structure on interleave. This means
that all code executed in the context of the kevent thread is allocating
node local.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Alok Kataria <alok.kataria@calsoftinc.com>
Cc: Andi Kleen <ak@suse.de>
Cc: <pj@sgi.com>
Cc: <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add suspend_console() and resume_console() to the suspend-to-disk code paths
so that the users of netconsole can use swsusp with it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This annotation makes it possible to assign a subclass on lock init. This
annotation is meant to reduce the _nested() annotations by assigning a
default subclass.
One could do without this annotation and rely on lockdep_set_class()
exclusively, but that would require a manual stack of struct lock_class_key
objects.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Unfortunately one of the recent changes in swsusp has broken the userland
suspend on SMP. Fix it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With the following patch, the ixp4xxdefconfig builds correctly. I'll
test some more configs if I get some time.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Squash this warning:
kernel/audit.c: In function 'kauditd_thread':
kernel/audit.c:367: warning: no return statement in function returning non-void
We might as test kthread_should_stop(), although it's not very pointful at
present.
The code which starts this thread looks racy - the kernel could start multiple
threads.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
