Commit Graph

59 Commits

Author SHA1 Message Date
David Vrabel
7616ee95f2 sdio: add SDIO_FBR_BASE(f) macro
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:16:27 +02:00
Pierre Ossman
e6f918bf39 mmc: fix sdio timeout calculation
SDIO doesn't have a CSD so it uses different timeout values than
SD memory.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:16:01 +02:00
Pierre Ossman
ce252edd86 mmc: fix incorrect divisor in debug output
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:15:45 +02:00
Pierre Ossman
4ff6471c02 sdio: enable wide bus mode
Enable 4-bit data bus mode, according to host and card
capabilities.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:15:16 +02:00
Pierre Ossman
6db5020e73 sdio: change clock speed
Change clock speed to the highest supported by the card.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:14:09 +02:00
Adrian Bunk
22bfc979d3 make struct sdio_dev_attrs[] static
On Wed, Jul 25, 2007 at 04:03:04AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.22-rc6-mm1:
>...
>  git-mmc.patch
>...
>  git trees
>...

sdio_dev_attrs[] can become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:13:32 +02:00
Nicolas Pitre
17b759aff9 sdio: add interface for host side SDIO interrupt reporting
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:13:08 +02:00
Pierre Ossman
112c9db91e sdio: support IO_RW_EXTENDED
Support the multi-byte transfer operation, including handlers for
common operations like writel()/readl().

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:09:34 +02:00
Nicolas Pitre
d1496c39e5 sdio: core support for SDIO function interrupt
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 21:01:33 +02:00
Nicolas Pitre
2342f3323c sdio: allow for mmc_claim_host to be aborted
It is sometimes necessary to give up on trying to claim the host lock,
especially if that happens in a thread that has to be stopped.

While at it, fix the description for mmc_claim_host() which was wrong.

Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:55:13 +02:00
Pierre Ossman
bcfe66e21e sdio: add basic sysfs attributes
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:54:15 +02:00
Pierre Ossman
d59b66c7a5 sdio: add modalias support
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:53:33 +02:00
Pierre Ossman
9eb3a94d02 mmc: whip bus uevent handler into shape
Make the mmc bus uevent callback look like all other subsystems.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:52:20 +02:00
Pierre Ossman
3b38bea0d9 sdio: add device id table and matching
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:51:27 +02:00
Nicolas Pitre
26074962e8 mmc: initialize mmc subsystem with subsys_initcall()
The problem is that the sdio_bus must be registered before any SDIO
drivers are registered against it otherwise the kernel sulks.  Because
the sdio_bus registration happens through module_init (equivalent to
device_initcall), then any SDIO
drivers linked before the SDIO core code in the kernel will be initialized
first.

Upcoming SDIO function drivers are likely to be located outside the
drivers/mmc directory as it is common practice to group drivers according
to their function rather than the bus they use.  SDIO drivers are therefore
likely to appear at random location in the kernel link.

To make sure the sdio_bus is always initialized before any SDIO drivers,
let's move the MMC init to the subsys_initcall level.

Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:45:39 +02:00
Pierre Ossman
1a632f8cdc sdio: split up common and function CIS parsing
Add a more clean separation between global, common CIS information
and the function specific one as we need the common information in
places where no specific function is specified.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:44:22 +02:00
Nicolas Pitre
b1538bcf75 sdio: link unknown CIS tuples to the sdio_func structure
This way those tuples that the core cares about are consumed by the core
code, and tuples that only function drivers might make sense of are
available to drivers.

Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:31:43 +02:00
Nicolas Pitre
b726126196 sdio: initial CIS parsing code
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:26:42 +02:00
Pierre Ossman
0597007f1b sdio: basic parsing of FBR
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:13:52 +02:00
Pierre Ossman
35c66c1908 sdio: read and decode interesting parts of the CCCR
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:12:18 +02:00
Pierre Ossman
fa64efa1f2 mmc: enable/disable functions for SDIO
Like many other buses, the devices (functions) on the SDIO bus
must be enabled before they can be used. Add functions that allow
drivers to do so.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 20:10:56 +02:00
Pierre Ossman
46f555f273 mmc: add basic SDIO I/O operations
Add command wrappers that simplify register access from SDIO
function drivers.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:57:03 +02:00
Pierre Ossman
f76c85154d mmc: add SDIO driver handling
Add basic driver handling to the SDIO device model.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:55:26 +02:00
Pierre Ossman
e29a7d73f4 mmc: basic SDIO device model
Add the sdio bus type and basic device handling.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:45:31 +02:00
Pierre Ossman
b2bcc798bb mmc: implement SDIO IO_RW_DIRECT operation
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:42:37 +02:00
Pierre Ossman
5c4e6f1301 mmc: detect SDIO cards
Really basic init sequence for SDIO cards.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 19:40:07 +02:00
Pierre Ossman
8fdd8521dc mmc: add missing printk levels
Some printk:s were missing an explicit level.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 09:15:22 +02:00
Pierre Ossman
b146d26a61 mmc: mmc_set_data_timeout() parameter write is redundant
The write parameter in mmc_set_data_timeout() is redundant as the
data structure contains information about the direction of the
transfer.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 09:15:00 +02:00
Pierre Ossman
d7604d7635 mmc: read ext_csd version number
Make sure we do not try to parse a structure we do not
understand.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 09:14:53 +02:00
Pierre Ossman
adf66a0dc5 mmc: improve error code feedback
Now that we use "normal" error codes, improve the reporting and response
to error codes in the core.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 09:14:43 +02:00
Pierre Ossman
17b0429dde mmc: remove custom error codes
Convert the MMC layer to use standard error codes and not its own,
incompatible values.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23 08:46:48 +02:00
Mariusz Kozlowski
be760a9de8 drivers/mmc/core/host.c: kmalloc + memset conversion to kzalloc
drivers/mmc/core/host.c | 3509 -> 3457 (-52 bytes)
 drivers/mmc/core/host.o | 92400 -> 92136 (-264 bytes)

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23 06:26:31 +02:00
Mariusz Kozlowski
733cb1e440 drivers/mmc/core/bus.c: kmalloc + memset conversion to kzalloc
drivers/mmc/core/bus.c | 5663 -> 5619 (-44 bytes)
 drivers/mmc/core/bus.o | 70899 -> 70731 (-168 bytes)

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23 06:26:26 +02:00
Adrian Bunk
393618510d drivers/mmc/core/: make 3 functions static
This patch makes the following needlessly global functions static:
- sd_ops.c: mmc_app_cmd()
- core.c: __mmc_release_bus()
- core.c: mmc_start_request()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 02:05:57 +02:00
Pierre Ossman
facba9179e mmc: add missing printk levels
Some printk:s were missing an explicit level.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 02:05:49 +02:00
Pierre Ossman
e4d2170874 mmc: proper debugging output in core
Make sure that the debugging output in the core is complete.
This should allow us to clean up all the extra debug output
that each and every other host driver seems to contain.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 02:05:30 +02:00
Pierre Ossman
109b5bed18 mmc: be more verbose about card insertions/removal
Let the user know that the kernel actually detected the card
by printing some basic information in dmesg.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 02:05:04 +02:00
Pierre Ossman
2986d0bf23 mmc: Don't hold lock when releasing an added card
When the card has been added to the device model, it might be bound
to a card driver. Therefore, we have to release the host lock when
trying to remove it as we otherwise might deadlock with the driver.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 01:54:06 +02:00
Pierre Ossman
cf795bfb3a mmc: add a might_sleep() to mmc_claim_host()
In the normal case, the host lock can be claimed directly.
When it cannot, the caller will sleep. Make sure we don't
have any latent bugs by always calling might_sleep().

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 01:53:48 +02:00
Pierre Ossman
67a61c4847 mmc: update kerneldoc
Make sure the kerneldoc comments are up to date and relevant.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 01:53:39 +02:00
Pierre Ossman
70f10482c6 mmc: update header file paths
Make sure all headers in the files reflect their true position
in the tree.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26 01:53:31 +02:00
Pierre Ossman
8c75deae1a mmc: fix silly copy-and-paste error
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09 21:28:09 +02:00
Pierre Ossman
ffce2e7e70 mmc: move layer init and workqueue to core file
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09 21:28:06 +02:00
Pierre Ossman
b93931a61a mmc: refactor host class handling
Move basic host class device handling to its own file for clarity.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09 21:28:01 +02:00
Pierre Ossman
4101c16a91 mmc: refactor bus operations
Move bus operations to its own file for the sake of clarity. Also
delegate sysfs attributes to bus handlers in preparation for other
more exotic types.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09 21:27:56 +02:00
Pierre Ossman
c3bff2ec10 mmc: get back read-only switch function
Somehow the code to read the read-only switch of SD cards got lost
in the reorganisation.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13 19:11:20 +02:00
Pierre Ossman
3373c0ae6a mmc: don't call switch on old cards
Make sure we don't call the switch function on cards too old to
support it. They should just ignore it, but some have been reported
to lock up instead.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-07 09:25:58 +02:00
Pierre Ossman
71651297a4 mmc: fix broken if clause
Fix a broken if clause which was causing SD cards to go into
4-bit mode even if the host did not support it.

(Reported by David Brownell and Marc Pignat)

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-07 09:25:54 +02:00
Andrew Morton
01f41ec7b3 mmc build fix
Cc: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:44 -07:00
Pierre Ossman
1efd48b3ae mmc: use lock instead of claim in debug check
As mmc_detect_change() can be called from irq context, using
claim (which can sleep) is inherently unsafe. Use the host
spinlock instead, which also is faster.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-08 22:42:57 +02:00