For lithium based target, rx pktlog depends on monitor status ring
and this ring is reaped by timer in host. if host try to disable
pktlog and high DL T-put traffic is ongoing in parallel, there is
no guarantee that HW stop to update PPDU status to monitor status
ring after host stopped reaping timer, unless host add some delay
between HTT ring reset msg and timer stopping, then FW will have
enough time to reset ring configuration.
Since FW side has disabled pktlog and looks pktlog is not necessary
for lithium based target, remove pktlog support by macro
FEATURE_PKTLOG, macro REMOVE_PKT_LOG is not preferred as it will
remove WDI_EVENT support that impact CFR feature.
Change-Id: I723f65ba3d2ffa58469b886e6795956f69d4e891
CRs-Fixed: 2763095
For older targets thermal mitigation is supported for the apps.
In moselle there a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: I89896dce808807486ef56b90812369f3d5f4b270
CRs-Fixed: 2757566
MAC address is of the format (XX:XX:XX:XX:XX:XX),
This feature is to hide logging 2nd, 3rd and 4th octet of the
MAC address in the logs.
To enable this feature set CONFIG_WLAN_TRACE_HIDE_MAC_ADDRESS to y.
For example, if this feature is enabled, then
mac address ae:45:9c:f1:c0:98 shall be printed as ae:**:**:**:c0:98
If this feature is disabled, then QDF_MAC_ADDR_FMT translates to
"%pM" and by default this feature disabled.
Change-Id: Ib4086c1390c3ecafa637616954939f7d2c9c0e5b
CRs-Fixed: 2752355
Take care to update the EAPOL Tx frame DA with AP mac addr if
DA is broadcast address as EAPOL BC doesnot make sense.
Change-Id: Id58b7b7971f5a7c11de0b46c6189a6e6ad1917ab
CRs-Fixed: 2745826
For SAP on DFS channel, the PCIe link down should be prevented
so that HalPhy can access DDR memory to report Radar found event.
Change-Id: Ia256d5df4d59071830d09c3f4821d73196327128
CRs-Fixed: 2740443
On some cases, dp_rx_thread can not handle nbufs in time,
then a large number of packets are pending in
rx_thread->nbuf_queue, which run out of system memory at
last and failed to malloc new buffers for refill buffer ring,
fw crash is encountered. To avoid this, drop RX packets when
the pending number becomes large.
Change-Id: Ie4e001dc584821cf68253aa3a15a5fd72394c736
CRs-Fixed: 2737181
Enable PM QoS support for 5.x kernel by adopting dev PM QoS APIs to
request device structures for CPUs and then requesting QoS on those CPU
devices.
Change-Id: I9c7565b44a72145e11178fe360f413ff578142cf
CRs-Fixed: 2734025
Add configuration feature CONFIG_WAPI_BIG_ENDIAN to
enable or disable BIG ENDIAN WAPI configuration based
on device type.
This was done as newer chipset firmware expects the
WAPI seq in big endian format and to maintain backward
compatibility with the older chipset firmware.
Change-Id: I972ca89e601b706e53408b0751c265d0aa311029
CRs-Fixed: 2746749
Enable logging feature which helps to check rx ring refill failure.
Currently rx ring refill count is updated same time from multiple
places without protection, so use atomic variable for refill count.
CRS-Fixed: 2740225
Change-Id: Icd88d351cb15d0f18edf0b986e4de95dbe4e6989
Enable RX buffer pool support for QCA6750. This will be utilized
during low memory conditions.
Change-Id: I8cee1e0996c81f3c4c408a22923d5107f4d014c3
CRs-Fixed: 2731507
It is required to enable blacklist manager to pass some case like
OCE-5.6.1, RSSI-based Association Rejection.
Change-Id: Iffae667851b63b8c28f9eadb9519c9172270c244
CRs-Fixed: 2741521
Dynamic rx aggregation feature depends on the context
id which is obtained from the packet context block.
This context id is invalid when this feature is not
enabled, and hence can lead to out of array access/write
leading to memory corruption.
Fix this issue by not using the context id when the dynamic
rx aggregation feature is not enabled.
Change-Id: Ie551217409b0f5aa2f704f9c617949e0d42a74d0
CRs-Fixed: 2742653
Enable the sanity check for rx descriptor nbuf
even for the perf build.
Also enable the rx rings history.
Change-Id: Ib127029009d0657ea51d3592af6a42f3de210c16
CRs-Fixed: 2739120
Add macro ROAM_OFFLOAD_V1 for new code and implement below functions
for connection manager roam part:
csr_handle_roam_state_change() roam offload state related handler.
Filling WMI_ROAM_SCAN_RSSI_THRESHOLD cmd parameters related process.
Change-Id: I0351155ca5a3d68ade6568c7527c5708582ccf1a
CRs-Fixed: 2730826
Add the cnss2 module config to the Genoa perf defconfig
to support cnss2 as dynamic loadable kernel module
Change-Id: I3410bf129edbe7d766a490e6fa104469a18f1187
Rename file name and modify function names to keep it inline
with sysfs attribute name 'stats'
Change-Id: Iffc390d4865977f9eff72a6a4bcf708c014f482e
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'range_ext'
Change-Id: Icf7ebbbcf1b8b219e64d1c9b98f1946069f91322
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'wlan_dbg'
Change-Id: I7d0e7b67afa701abd64efb62012c218ee4ab158d
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'fw_mode_config'
Change-Id: Ia389fa8807bbd0e58de58c503d9f3bbbef9ec707
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'scan_config'
Change-Id: I6621cbe5571541d073072ef9e0348d771fd3bc4a
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'radar'
Change-Id: If13effc45323f5a286d8aeb7a8e27848cb3e618b
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'tx_stbc'
Change-Id: I274c1405fab7385202431b48d65603c38783222b
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'tdls_peers'
Change-Id: If6aa504dccd22ce0ccff11f3d73ffb1eedb5895c
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'sta_info'
Change-Id: Ibb13c1496ea1dd5bc3b024b99414ac8d72db3be6
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'temperature'
Change-Id: I8f31d59be9954d3ffe1ff7c11d16dd24b9e2644d
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'monitor_mode_channel'
Change-Id: Ic207d6e29c14a0b33ed4982d533a78729d32a4ba
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'channel'
Change-Id: I9c73e572bdb80edc3431180448dffd9843d6a720
CRs-Fixed: 2731064
Enable support for LL mode feature on QCS40x platform in default
config. This feature also requires PM_QOS config to be set.
Change-Id: I49b74d905d2f84b9e15e7ba5d75d719124e818f5
CRs-Fixed: 2731679
Currently connection manager feature flag is disabled with the
comment line which is not the correct way to enable/disable the
feature.
Correctly disable the connection manager feature flag.
Change-Id: If39a945ea4d2c185d6231d0967688a8e243bd8fe
CRs-Fixed: 2731718
ICNSS2 platform driver is used for moselle and adrastea which uses
IPCI and SNOC PLD layer, respectively. Add support to enable both
for ICNSS2 based to target flag.
Change-Id: I06fbacade99b09c9ea7347aa28e10968eaeedaa8
Add PLD functions for Runtime suspend and resume callbacks,
and enable Runtime PM support for Moselle.
Change-Id: Ie990334c0c60892ec0f0ad6fac3253b3d326a919
CRs-Fixed: 2720832
ext-wow feature never supported/tested on MCC, and there
is no known customer using this feature, so compile it out.
Change-Id: I3c79ebecd5b2a44cfa9339748bf8e94f596e71bd
CRs-Fixed: 2680331
The wlan_mem_stats node will print the DMA, SKB and heap
memory allocated in the wlan host driver. This is applicable
to perf and defconfig builds.
File path to new node is:
/sys/kernel/wifi/wlan/wlan_mem_stats
Change-Id: Ic05423d362de1ef07a3ecbdd6408a7226e2a3c2f
CRs-Fixed: 2680360
Add driver command support to dump all the function call
mapping which is cached in global buffer.
Change-Id: I03b2162ccda171005e6fa8a7bb09cbf9c4819421
CRs-Fixed: 2677976
Based on multi-clients test experiment, when AUTO SA8155+HST
works as SAP connected more than 8 Ref STA clients, it requires
increase in TX descriptors to burst traffic to each Rx device,
or flow control happens to stop host tx queue frequently for
missing TX descriptors, can't get high throughput.
Change-Id: Ie2adbdd3bfece323d51d5e96fef6001c4e39c3f4
CRs-Fixed: 2703765
