Commit Graph

501 Commits

Author SHA1 Message Date
Paul Mackerras
b6ec995a21 Merge from Linus' tree 2005-10-12 14:43:32 +10:00
Harald Welte
46113830a1 [PATCH] Fix signal sending in usbdevio on async URB completion
If a process issues an URB from userspace and (starts to) terminate
before the URB comes back, we run into the issue described above.  This
is because the urb saves a pointer to "current" when it is posted to the
device, but there's no guarantee that this pointer is still valid
afterwards.

In fact, there are three separate issues:

1) the pointer to "current" can become invalid, since the task could be
   completely gone when the URB completion comes back from the device.

2) Even if the saved task pointer is still pointing to a valid task_struct,
   task_struct->sighand could have gone meanwhile.

3) Even if the process is perfectly fine, permissions may have changed,
   and we can no longer send it a signal.

So what we do instead, is to save the PID and uid's of the process, and
introduce a new kill_proc_info_as_uid() function.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ Fixed up types and added symbol exports ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 16:16:33 -07:00
Rafael J. Wysocki
3dd083255d [PATCH] x86_64: Set up safe page tables during resume
The following patch makes swsusp avoid the possible temporary corruption
of page translation tables during resume on x86-64.  This is achieved by
creating a copy of the relevant page tables that will not be modified by
swsusp and can be safely used by it on resume.

The problem is that during resume on x86-64 swsusp may temporarily
corrupt the page tables used for the direct mapping of RAM.  If that
happens, a page fault occurs and cannot be handled properly, which leads
to the solid hang of the affected system.  This leads to the loss of the
system's state from before suspend and may result in the loss of data or
the corruption of filesystems, so it is a serious issue.  Also, it
appears to happen quite often (for me, as often as 50% of the time).

The problem is related to the fact that (at least) one of the PMD
entries used in the direct memory mapping (starting at PAGE_OFFSET)
points to a page table the physical address of which is much greater
than the physical address of the PMD entry itself.  Moreover,
unfortunately, the physical address of the page table before suspend
(i.e.  the one stored in the suspend image) happens to be different to
the physical address of the corresponding page table used during resume
(i.e.  the one that is valid right before swsusp_arch_resume() in
arch/x86_64/kernel/suspend_asm.S is executed).  Thus while the image is
restored, the "offending" PMD entry gets overwritten, so it does not
point to the right physical address any more (i.e.  there's no page
table at the address pointed to by it, because it points to the address
the page table has been at during suspend).  Consequently, if the PMD
entry is used later on, and it _is_ used in the process of copying the
image pages, a page fault occurs, but it cannot be handled in the normal
way and the system hangs.

In principle we can call create_resume_mapping() from
swsusp_arch_resume() (ie.  from suspend_asm.S), but then the memory
allocations in create_resume_mapping(), resume_pud_mapping(), and
resume_pmd_mapping() must be made carefully so that we use _only_
NosaveFree pages in them (the other pages are overwritten by the loop in
swsusp_arch_resume()).  Additionally, we are in atomic context at that
time, so we cannot use GFP_KERNEL.  Moreover, if one of the allocations
fails, we should free all of the allocated pages, so we need to trace
them somehow.

All of this is done in the appended patch, except that the functions
populating the page tables are located in arch/x86_64/kernel/suspend.c
rather than in init.c.  It may be done in a more elegan way in the
future, with the help of some swsusp patches that are in the works now.

[AK: move some externs into headers, renamed a function]

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10 08:36:46 -07:00
Al Viro
dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Oleg Nesterov
788e05a67c [PATCH] fix do_coredump() vs SIGSTOP race
Let's suppose we have 2 threads in thread group:
	A - does coredump
	B - has pending SIGSTOP

thread A						thread B

do_coredump:						get_signal_to_deliver:

  lock(->sighand)
  ->signal->flags = SIGNAL_GROUP_EXIT
  unlock(->sighand)

							lock(->sighand)
							signr = dequeue_signal()
								->signal->flags |= SIGNAL_STOP_DEQUEUED
								return SIGSTOP;

							do_signal_stop:
							    unlock(->sighand)

  coredump_wait:

      zap_threads:
          lock(tasklist_lock)
          send SIGKILL to B
              // signal_wake_up() does nothing
          unlock(tasklist_lock)

							    lock(tasklist_lock)
							    lock(->sighand)
							    re-check sig->flags & SIGNAL_STOP_DEQUEUED, yes
							    set_current_state(TASK_STOPPED);
							    finish_stop:
							        schedule();
							            // ->state == TASK_STOPPED

      wait_for_completion(&startup_done)
         // waits for complete() from B,
         // ->state == TASK_UNINTERRUPTIBLE

We can't wake up 'B' in any way:

	SIGCONT will be ignored because handle_stop_signal() sees
	->signal->flags & SIGNAL_GROUP_EXIT.

	sys_kill(SIGKILL)->__group_complete_signal() will choose
	uninterruptible 'A', so it can't help.

	sys_tkill(B, SIGKILL) will be ignored by specific_send_sig_info()
	because B already has pending SIGKILL.

This scenario is not possbile if 'A' does do_group_exit(), because
it sets sig->flags = SIGNAL_GROUP_EXIT and delivers SIGKILL to
subthreads atomically, holding both tasklist_lock and sighand->lock.
That means that do_signal_stop() will notice !SIGNAL_STOP_DEQUEUED
after re-locking ->sighand. And it is not possible to any other
thread to re-add SIGNAL_STOP_DEQUEUED later, because dequeue_signal()
can only return SIGKILL.

I think it is better to change do_coredump() to do sigaddset(SIGKILL)
and signal_wake_up() under sighand->lock, but this patch is much
simpler.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 14:53:31 -07:00
Linus Torvalds
14bf01bb05 Fix inequality comparison against "task->state"
We should always use bitmask ops, rather than depend on some ordering of
the different states.  With the TASK_NONINTERACTIVE flag, the inequality
doesn't really work.

Oleg Nesterov argues (likely correctly) that this test is unnecessary in
the first place.  However, the minimal fix for now is to at least make
it work in the presense of TASK_NONINTERACTIVE.  Waiting for consensus
from Roland & co on potential bigger cleanups.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01 11:04:18 -07:00
Al Viro
eacaa1f5aa [PATCH] cpuset crapectomy
Switched cpuset_common_file_read() to simple_read_from_buffer(), killed
a bunch of useless (and not quite correct - e.g.  min(size_t,ssize_t))
code.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 08:42:24 -07:00
Roland McGrath
5acbc5cb50 [PATCH] Fix task state testing properly in do_signal_stop()
Any tests using < TASK_STOPPED or the like are left over from the time
when the TASK_ZOMBIE and TASK_DEAD bits were in the same word, and it
served to check for "stopped or dead".  I think this one in
do_signal_stop is the only such case.  It has been buggy ever since
exit_state was separated, and isn't testing the exit_state value.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 15:20:47 -07:00
Paul Mackerras
ab11d1ea28 Merge by hand from Linus' tree.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-29 13:13:36 +10:00
Paul Jackson
5134fc15b6 [PATCH] cpuset read past eof memory leak fix
Don't leak a page of memory if user reads a cpuset file past eof.

Signed-off-by: KUROSAWA Takahiro <kurosawa@valinux.co.jp>
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:58:51 -07:00
Rafael J. Wysocki
0f7347c20c [PATCH] swsusp: avoid problems if there are too many pages to save
The following patch makes swsusp avoid problems during resume if there are
too many pages to save on suspend.  It adds a constant that allows us to
verify if we are going to save too many pages and implements the check
(this is done as early as we can tell that the check will trigger, which is
in swsusp_alloc()).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:41 -07:00
Rusty Russell
f36462f078 [PATCH] Ignore trailing whitespace on kernel parameters correctly
Dave Jones says:

... if the modprobe.conf has trailing whitespace, modules fail to load
with the following helpful message..

	snd_intel8x0: Unknown parameter `'

Previous version truncated last argument.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:41 -07:00
Rafael J. Wysocki
f2d613799a [PATCH] swsusp: prevent possible memory leak
Prevent swsusp from leaking some memory in case of an error in
read_pagedir().  It also prevents the BUG_ON() from triggering if there's
an error while reading swap.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:40 -07:00
Rafael J. Wysocki
254b54771c [PATCH] swsusp: remove wrong code from data_free
The following patch removes some wrong code from the data_free() function
in swsusp.

This function could only be called if there's an error while writing the
suspend image to swap, so it is not triggered easily.  However, if
triggered, it would probably corrupt some memory.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:40 -07:00
Paul Mackerras
beeca08738 Don't call a NULL ack function in the generic IRQ code.
Some IRQ controllers don't need an ack function (e.g. OpenPIC on
PPC platforms) and for them we'd rather not have the overhead
of doing an indirect call to a function that does nothing.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 20:29:44 +10:00
Linus Torvalds
188a1eafa0 Make sure SIGKILL gets proper respect
Bhavesh P. Davda <bhavesh@avaya.com> noticed that SIGKILL wouldn't
properly kill a process under just the right cicumstances: a stopped
task that already had another signal queued would get the SIGKILL
queued onto the shared queue, and there it would remain until SIGCONT.

This simplifies the signal acceptance logic, and fixes the bug in the
process.

Losely based on an earlier patch by Bhavesh.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 13:22:21 -07:00
Pavel Machek
8686bcd0a5 [PATCH] swsusp: fix comments
Fix comments in swsusp.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:36 -07:00
Rafael J. Wysocki
57487f4376 [PATCH] swsusp: do not trigger BUG_ON() if there is not enough memory
The following patch makes swsusp avoid triggering the BUG_ON() in
swsusp_suspend() if there is not enough memory for suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:35 -07:00
Randy Dunlap
720b9429e8 [PATCH] SOFTWARE_SUSPEND needs HOTPLUG_CPU on SMP
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:34 -07:00
Eric W. Biederman
88d10bbaae [PATCH] suspend: cleanup calling of power off methods.
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent.  Despite checking and double
checking my work it appears I missed an obvious one.

The S4 suspend code for PM_DISK_PLATFORM was also calling device_shutdown
without setting system_state, and was not calling the appropriate
reboot_notifier.

This patch fixes the bug by replacing the call of device_suspend with
kernel_poweroff_prepare.

Various forms of this failure have been fixed and tracked for a while.

Thanks for tracking this down go to: Alexey Starikovskiy, Meelis Roos
<mroos@linux.ee>, Nigel Cunningham <ncunningham@cyclades.com>, Pierre
Ossman <drzeus-list@drzeus.cx>

History of this bug is at:
http://bugme.osdl.org/show_bug.cgi?id=4320

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:33 -07:00
Eric W. Biederman
e4c94330e3 [PATCH] reboot: comment and factor the main reboot functions
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent.  Despite checking and double
checking my work it appears I missed an obvious one.

This first patch simply refactors the reboot routines so all of the
preparation for various kinds of reboots are in their own functions.
Making it very hard to get the various kinds of reboot out of sync.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 22:17:33 -07:00
Andrew Morton
31f6d9d628 [PATCH] Add printk_clock()
ia64's sched_clock() accesses per-cpu data which isn't set up at boot time.
Hence ia64 cannot use printk timestamping, because printk() will crash in
sched_clock().

So make printk() use printk_clock(), defaulting to sched_clock(), overrideable
by the architecture via attribute(weak).

Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 10:11:54 -07:00
Dipankar Sarma
4fb3a53860 [PATCH] files: fix preemption issues
With the new fdtable locking rules, you have to protect fdtable with either
->file_lock or rcu_read_lock/unlock().  There are some places where we
aren't doing either.  This patch fixes those places.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:02 -07:00
Michael Kerrisk
2030c0fd3d [PATCH] PR_GET_DUMPABLE returns incorrect info
2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one
version of this patch can be found here
http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ).

This patch also made corresponding changes in kernel/sys.c to change the
prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was
modified from 0..1 to 0..2.

However, a corresponding change was not made for PR_GET_DUMPABLE: if the
dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that
the caller can't determine the true setting of this flag.

Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:01 -07:00
Srivatsa Vaddagiri
26ff6ad978 [PATCH] CPU hotplug breaks wake_up_new_task
Fix a problem wherein a new-born task is added to a dead CPU.

Signed-off-by: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:49:59 -07:00
Ingo Molnar
da04c03503 [PATCH] Fix spinlock owner debugging
fix up the runqueue lock owner only if we truly did a context-switch
with the runqueue lock held. Impacts ia64, mips, sparc64 and arm.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 09:59:04 -07:00
Linus Torvalds
5d54e69c68 Merge master.kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6 2005-09-13 09:47:30 -07:00
Randy Dunlap
9f1583339a [PATCH] use add_taint() for setting tainted bit flags
Use the add_taint() interface for setting tainted bit flags instead of
doing it manually.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:29 -07:00
Andrew Morton
8a1c17574a [PATCH] schedule_timeout_[un]interruptible() speedup
These functions don't need schedule_timeout()'s barrier.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:29 -07:00
Andi Kleen
3f74478b5f [PATCH] x86-64: Some cleanup and optimization to the processor data area.
- Remove unused irqrsp field
- Remove pda->me
- Optimize set_softirq_pending slightly

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 10:49:58 -07:00
Paul Jackson
b3426599af [PATCH] cpuset semaphore depth check optimize
Optimize the deadlock avoidance check on the global cpuset
semaphore cpuset_sem.  Instead of adding a depth counter to the
task struct of each task, rather just two words are enough, one
to store the depth and the other the current cpuset_sem holder.

Thanks to Nikita Danilov for the idea.

Signed-off-by: Paul Jackson <pj@sgi.com>

[ We may want to change this further, but at least it's now
  a totally internal decision to the cpusets code ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 09:16:27 -07:00
Linus Torvalds
1df5c10a5b Mark ia64-specific MCA/INIT scheduler hooks as dangerous
..and only enable them for ia64. The functions are only valid
when the whole system has been totally stopped and no scheduler
activity is ongoing on any CPU, and interrupts are globally
disabled.

In other words, they aren't useful for anything else. So make
sure that nobody can use them by mistake.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 07:59:21 -07:00
Keith Owens
a2a979821b [PATCH] MCA/INIT: scheduler hooks
Scheduler hooks to see/change which process is deemed to be on a cpu.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11 14:01:30 -07:00
Nishanth Aravamudan
75bcc8c5e1 [PATCH] kernel: fix-up schedule_timeout() usage
Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:37 -07:00
Nishanth Aravamudan
64ed93a268 [PATCH] add schedule_timeout_{,un}interruptible() interfaces
Add schedule_timeout_{,un}interruptible() interfaces so that
schedule_timeout() callers don't have to worry about forgetting to add the
set_current_state() call beforehand.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:36 -07:00
Randy Dunlap
417ef53141 [PATCH] kernel/acct: add kerneldoc
for kernel/acct.c:
- fix typos
- add kerneldoc for non-static functions

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:26 -07:00
Siddha, Suresh B
0c117f1b4d [PATCH] sched: allow the load to grow upto its cpu_power
Don't pull tasks from a group if that would cause the group's total load to
drop below its total cpu_power (ie.  cause the group to start going idle).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:24 -07:00
Siddha, Suresh B
fa3b6ddc3f [PATCH] sched: don't kick ALB in the presence of pinned task
Jack Steiner brought this issue at my OLS talk.

Take a scenario where two tasks are pinned to two HT threads in a physical
package.  Idle packages in the system will keep kicking migration_thread on
the busy package with out any success.

We will run into similar scenarios in the presence of CMP/NUMA.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:24 -07:00
Renaud Lienhart
5927ad78ec [PATCH] sched: use cached variable in sys_sched_yield()
In sys_sched_yield(), we cache current->array in the "array" variable, thus
there's no need to dereference "current" again later.

Signed-Off-By: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:23 -07:00
Nick Piggin
5969fe0618 [PATCH] sched: HT optimisation
If an idle sibling of an HT queue encounters a busy sibling, then make
higher level load balancing of the non-idle variety.

Performance of multiprocessor HT systems with low numbers of tasks
(generally < number of virtual CPUs) can be significantly worse than the
exact same workloads when running in non-HT mode.  The reason is largely
due to poor scheduling behaviour.

This patch improves the situation, making the performance gap far less
significant on one problematic test case (tbench).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:23 -07:00
Nick Piggin
e17224bf1d [PATCH] sched: less locking
During periodic load balancing, don't hold this runqueue's lock while
scanning remote runqueues, which can take a non trivial amount of time
especially on very large systems.

Holding the runqueue lock will only help to stabilise ->nr_running, however
this doesn't do much to help because tasks being woken will simply get held
up on the runqueue lock, so ->nr_running would not provide a really
accurate picture of runqueue load in that case anyway.

What's more, ->nr_running (and possibly the cpu_load averages) of remote
runqueues won't be stable anyway, so load balancing is always an inexact
operation.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:23 -07:00
Nick Piggin
d6d5cfaf45 [PATCH] sched: less newidle locking
Similarly to the earlier change in load_balance, only lock the runqueue in
load_balance_newidle if the busiest queue found has a nr_running > 1.  This
will reduce frequency of expensive remote runqueue lock aquisitions in the
schedule() path on some workloads.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:23 -07:00
Ingo Molnar
67f9a619e7 [PATCH] sched: fix SMT scheduler latency bug
William Weston reported unusually high scheduling latencies on his x86 HT
box, on the -RT kernel.  I managed to reproduce it on my HT box and the
latency tracer shows the incident in action:

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
      du-2803  3Dnh2    0us : __trace_start_sched_wakeup (try_to_wake_up)
        ..............................................................
        ... we are running on CPU#3, PID 2778 gets woken to CPU#1: ...
        ..............................................................
      du-2803  3Dnh2    0us : __trace_start_sched_wakeup <<...>-2778> (73 1)
      du-2803  3Dnh2    0us : _raw_spin_unlock (try_to_wake_up)
        ................................................
        ... still on CPU#3, we send an IPI to CPU#1: ...
        ................................................
      du-2803  3Dnh1    0us : resched_task (try_to_wake_up)
      du-2803  3Dnh1    1us : smp_send_reschedule (try_to_wake_up)
      du-2803  3Dnh1    1us : send_IPI_mask_bitmask (smp_send_reschedule)
      du-2803  3Dnh1    2us : _raw_spin_unlock_irqrestore (try_to_wake_up)
        ...............................................
        ... 1 usec later, the IPI arrives on CPU#1: ...
        ...............................................
  <idle>-0     1Dnh.    2us : smp_reschedule_interrupt (c0100c5a 0 0)

So far so good, this is the normal wakeup/preemption mechanism.  But here
comes the scheduler anomaly on CPU#1:

  <idle>-0     1Dnh.    2us : preempt_schedule_irq (need_resched)
  <idle>-0     1Dnh.    2us : preempt_schedule_irq (need_resched)
  <idle>-0     1Dnh.    3us : __schedule (preempt_schedule_irq)
  <idle>-0     1Dnh.    3us : profile_hit (__schedule)
  <idle>-0     1Dnh1    3us : sched_clock (__schedule)
  <idle>-0     1Dnh1    4us : _raw_spin_lock_irq (__schedule)
  <idle>-0     1Dnh1    4us : _raw_spin_lock_irqsave (__schedule)
  <idle>-0     1Dnh2    5us : _raw_spin_unlock (__schedule)
  <idle>-0     1Dnh1    5us : preempt_schedule (__schedule)
  <idle>-0     1Dnh1    6us : _raw_spin_lock (__schedule)
  <idle>-0     1Dnh2    6us : find_next_bit (__schedule)
  <idle>-0     1Dnh2    6us : _raw_spin_lock (__schedule)
  <idle>-0     1Dnh3    7us : find_next_bit (__schedule)
  <idle>-0     1Dnh3    7us : find_next_bit (__schedule)
  <idle>-0     1Dnh3    8us : _raw_spin_unlock (__schedule)
  <idle>-0     1Dnh2    8us : preempt_schedule (__schedule)
  <idle>-0     1Dnh2    8us : find_next_bit (__schedule)
  <idle>-0     1Dnh2    9us : trace_stop_sched_switched (__schedule)
  <idle>-0     1Dnh2    9us : _raw_spin_lock (trace_stop_sched_switched)
  <idle>-0     1Dnh3   10us : trace_stop_sched_switched <<...>-2778> (73 8c)
  <idle>-0     1Dnh3   10us : _raw_spin_unlock (trace_stop_sched_switched)
  <idle>-0     1Dnh1   10us : _raw_spin_unlock (__schedule)
  <idle>-0     1Dnh.   11us : local_irq_enable_noresched (preempt_schedule_irq)
  <idle>-0     1Dnh.   11us < (0)

we didnt pick up pid 2778! It only gets scheduled much later:

   <...>-2778  1Dnh2  412us : __switch_to (__schedule)
   <...>-2778  1Dnh2  413us : __schedule <<idle>-0> (8c 73)
   <...>-2778  1Dnh2  413us : _raw_spin_unlock (__schedule)
   <...>-2778  1Dnh1  413us : trace_stop_sched_switched (__schedule)
   <...>-2778  1Dnh1  414us : _raw_spin_lock (trace_stop_sched_switched)
   <...>-2778  1Dnh2  414us : trace_stop_sched_switched <<...>-2778> (73 1)
   <...>-2778  1Dnh2  414us : _raw_spin_unlock (trace_stop_sched_switched)
   <...>-2778  1Dnh1  415us : trace_stop_sched_switched (__schedule)

the reason for this anomaly is the following code in dependent_sleeper():

                /*
                 * If a user task with lower static priority than the
                 * running task on the SMT sibling is trying to schedule,
                 * delay it till there is proportionately less timeslice
                 * left of the sibling task to prevent a lower priority
                 * task from using an unfair proportion of the
                 * physical cpu's resources. -ck
                 */
[...]
                        if (((smt_curr->time_slice * (100 - sd->per_cpu_gain) /
                                100) > task_timeslice(p)))
                                        ret = 1;

Note that in contrast to the comment above, we dont actually do the check
based on static priority, we do the check based on timeslices.  But
timeslices go up and down, and even highprio tasks can randomly have very
low timeslices (just before their next refill) and can thus be judged as
'lowprio' by the above piece of code.  This condition is clearly buggy.
The correct test is to check for static_prio _and_ to check for the
preemption priority.  Even on different static priority levels, a
higher-prio interactive task should not be delayed due to a
higher-static-prio CPU hog.

There is a symmetric bug in the 'kick SMT sibling' code of this function as
well, which can be solved in a similar way.

The patch below (against the current scheduler queue in -mm) fixes both
bugs.  I have build and boot-tested this on x86 SMT, and nice +20 tasks
still get properly throttled - so the dependent-sleeper logic is still in
action.

btw., these bugs pessimised the SMT scheduler because the 'delay wakeup'
property was applied too liberally, so this fix is likely a throughput
improvement as well.

I separated out a smt_slice() function to make the code easier to read.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:23 -07:00
Ingo Molnar
d79fc0fc66 [PATCH] sched: TASK_NONINTERACTIVE
This patch implements a task state bit (TASK_NONINTERACTIVE), which can be
used by blocking points to mark the task's wait as "non-interactive".  This
does not mean the task will be considered a CPU-hog - the wait will simply
not have an effect on the waiting task's priority - positive or negative
alike.  Right now only pipe_wait() will make use of it, because it's a
common source of not-so-interactive waits (kernel compilation jobs, etc.).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:22 -07:00
Ingo Molnar
95cdf3b799 [PATCH] sched cleanups
whitespace cleanups.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:22 -07:00
M.Baris Demiray
da5a552270 [PATCH] sched: make idlest_group/cpu cpus_allowed-aware
Add relevant checks into find_idlest_group() and find_idlest_cpu() to make
them return only the groups that have allowed CPUs and allowed CPUs
respectively.

Signed-off-by: M.Baris Demiray <baris@labristeknoloji.com>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:22 -07:00
Con Kolivas
fc38ed7531 [PATCH] sched: run SCHED_NORMAL tasks with real time tasks on SMT siblings
The hyperthread aware nice handling currently puts to sleep any non real
time task when a real time task is running on its sibling cpu.  This can
lead to prolonged starvation by having the non real time task pegged to the
cpu with load balancing not pulling that task away.

Currently we force lower priority hyperthread tasks to run a percentage of
time difference based on timeslice differences which is meaningless when
comparing real time tasks to SCHED_NORMAL tasks.  We can allow non real
time tasks to run with real time tasks on the sibling up to per_cpu_gain%
if we use jiffies as a counter.

Cleanups and micro-optimisations to the relevant code section should make
it more understandable as well.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:22 -07:00
Paul Jackson
4247bdc600 [PATCH] cpuset semaphore depth check deadlock fix
The cpusets-formalize-intermediate-gfp_kernel-containment patch
has a deadlock problem.

This patch was part of a set of four patches to make more
extensive use of the cpuset 'mem_exclusive' attribute to
manage kernel GFP_KERNEL memory allocations and to constrain
the out-of-memory (oom) killer.

A task that is changing cpusets in particular ways on a system
when it is very short of free memory could double trip over
the global cpuset_sem semaphore (get the lock and then deadlock
trying to get it again).

The second attempt to get cpuset_sem would be in the routine
cpuset_zone_allowed().  This was discovered by code inspection.
I can not reproduce the problem except with an artifically
hacked kernel and a specialized stress test.

In real life you cannot hit this unless you are manipulating
cpusets, and are very unlikely to hit it unless you are rapidly
modifying cpusets on a memory tight system.  Even then it would
be a rare occurence.

If you did hit it, the task double tripping over cpuset_sem
would deadlock in the kernel, and any other task also trying
to manipulate cpusets would deadlock there too, on cpuset_sem.
Your batch manager would be wedged solid (if it was cpuset
savvy), but classic Unix shells and utilities would work well
enough to reboot the system.

The unusual condition that led to this bug is that unlike most
semaphores, cpuset_sem _can_ be acquired while in the page
allocation code, when __alloc_pages() calls cpuset_zone_allowed.
So it easy to mistakenly perform the following sequence:
  1) task makes system call to alter a cpuset
  2) take cpuset_sem
  3) try to allocate memory
  4) memory allocator, via cpuset_zone_allowed, trys to take cpuset_sem
  5) deadlock

The reason that this is not a serious bug for most users
is that almost all calls to allocate memory don't require
taking cpuset_sem.  Only some code paths off the beaten
track require taking cpuset_sem -- which is good.  Taking
a global semaphore on the main code path for allocating
memory would not scale well.

This patch fixes this deadlock by wrapping the up() and down()
calls on cpuset_sem in kernel/cpuset.c with code that tracks
the nesting depth of the current task on that semaphore, and
only does the real down() if the task doesn't hold the lock
already, and only does the real up() if the nesting depth
(number of unmatched downs) is exactly one.

The previous required use of refresh_mems(), anytime that
the cpuset_sem semaphore was acquired and the code executed
while holding that semaphore might try to allocate memory, is
no longer required.  Two refresh_mems() calls were removed
thanks to this.  This is a good change, as failing to get
all the necessary refresh_mems() calls placed was a primary
source of bugs in this cpuset code.  The only remaining call
to refresh_mems() is made while doing a memory allocation,
if certain task memory placement data needs to be updated
from its cpuset, due to the cpuset having been changed behind
the tasks back.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:21 -07:00
Ingo Molnar
fb1c8f93d8 [PATCH] spinlock consolidation
This patch (written by me and also containing many suggestions of Arjan van
de Ven) does a major cleanup of the spinlock code.  It does the following
things:

 - consolidates and enhances the spinlock/rwlock debugging code

 - simplifies the asm/spinlock.h files

 - encapsulates the raw spinlock type and moves generic spinlock
   features (such as ->break_lock) into the generic code.

 - cleans up the spinlock code hierarchy to get rid of the spaghetti.

Most notably there's now only a single variant of the debugging code,
located in lib/spinlock_debug.c.  (previously we had one SMP debugging
variant per architecture, plus a separate generic one for UP builds)

Also, i've enhanced the rwlock debugging facility, it will now track
write-owners.  There is new spinlock-owner/CPU-tracking on SMP builds too.
All locks have lockup detection now, which will work for both soft and hard
spin/rwlock lockups.

The arch-level include files now only contain the minimally necessary
subset of the spinlock code - all the rest that can be generalized now
lives in the generic headers:

 include/asm-i386/spinlock_types.h       |   16
 include/asm-x86_64/spinlock_types.h     |   16

I have also split up the various spinlock variants into separate files,
making it easier to see which does what. The new layout is:

   SMP                         |  UP
   ----------------------------|-----------------------------------
   asm/spinlock_types_smp.h    |  linux/spinlock_types_up.h
   linux/spinlock_types.h      |  linux/spinlock_types.h
   asm/spinlock_smp.h          |  linux/spinlock_up.h
   linux/spinlock_api_smp.h    |  linux/spinlock_api_up.h
   linux/spinlock.h            |  linux/spinlock.h

/*
 * here's the role of the various spinlock/rwlock related include files:
 *
 * on SMP builds:
 *
 *  asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the
 *                        initializers
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  asm/spinlock.h:       contains the __raw_spin_*()/etc. lowlevel
 *                        implementations, mostly inline assembly code
 *
 *   (also included on UP-debug builds:)
 *
 *  linux/spinlock_api_smp.h:
 *                        contains the prototypes for the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 *
 * on UP builds:
 *
 *  linux/spinlock_type_up.h:
 *                        contains the generic, simplified UP spinlock type.
 *                        (which is an empty structure on non-debug builds)
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  linux/spinlock_up.h:
 *                        contains the __raw_spin_*()/etc. version of UP
 *                        builds. (which are NOPs on non-debug, non-preempt
 *                        builds)
 *
 *   (included on UP-non-debug builds:)
 *
 *  linux/spinlock_api_up.h:
 *                        builds the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 */

All SMP and UP architectures are converted by this patch.

arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via
crosscompilers.  m32r, mips, sh, sparc, have not been tested yet, but should
be mostly fine.

From: Grant Grundler <grundler@parisc-linux.org>

  Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU).
  Builds 32-bit SMP kernel (not booted or tested).  I did not try to build
  non-SMP kernels.  That should be trivial to fix up later if necessary.

  I converted bit ops atomic_hash lock to raw_spinlock_t.  Doing so avoids
  some ugly nesting of linux/*.h and asm/*.h files.  Those particular locks
  are well tested and contained entirely inside arch specific code.  I do NOT
  expect any new issues to arise with them.

 If someone does ever need to use debug/metrics with them, then they will
  need to unravel this hairball between spinlocks, atomic ops, and bit ops
  that exist only because parisc has exactly one atomic instruction: LDCW
  (load and clear word).

From: "Luck, Tony" <tony.luck@intel.com>

   ia64 fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjanv@infradead.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se>
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:21 -07:00
Dipankar Sarma
ab2af1f500 [PATCH] files: files struct with RCU
Patch to eliminate struct files_struct.file_lock spinlock on the reader side
and use rcu refcounting rcuref_xxx api for the f_count refcounter.  The
updates to the fdtable are done by allocating a new fdtable structure and
setting files->fdt to point to the new structure.  The fdtable structure is
protected by RCU thereby allowing lock-free lookup.  For fd arrays/sets that
are vmalloced, we use keventd to free them since RCU callbacks can't sleep.  A
global list of fdtable to be freed is not scalable, so we use a per-cpu list.
If keventd is already handling the current cpu's work, we use a timer to defer
queueing of that work.

Since the last publication, this patch has been re-written to avoid using
explicit memory barriers and use rcu_assign_pointer(), rcu_dereference()
premitives instead.  This required that the fd information is kept in a
separate structure (fdtable) and updated atomically.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:55 -07:00
Dipankar Sarma
badf16621c [PATCH] files: break up files struct
In order for the RCU to work, the file table array, sets and their sizes must
be updated atomically.  Instead of ensuring this through too many memory
barriers, we put the arrays and their sizes in a separate structure.  This
patch takes the first step of putting the file table elements in a separate
structure fdtable that is embedded withing files_struct.  It also changes all
the users to refer to the file table using files_fdtable() macro.  Subsequent
applciation of RCU becomes easier after this.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:55 -07:00
Dipankar Sarma
c0dfb29051 [PATCH] files: rcuref APIs
Adds a set of primitives to do reference counting for objects that are looked
up without locks using RCU.

Signed-off-by: Ravikiran Thirumalai <kiran_th@gmail.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:54 -07:00
KUROSAWA Takahiro
73a358d189 [PATCH] fix for cpusets minor problem
This patch fixes minor problem that the CPUSETS have when files in the
cpuset filesystem are read after lseek()-ed beyond the EOF.

Signed-off-by: KUROSAWA Takahiro <kurosawa@valinux.co.jp>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:32 -07:00
Chen, Kenneth W
383f2835eb [PATCH] Prefetch kernel stacks to speed up context switch
For architecture like ia64, the switch stack structure is fairly large
(currently 528 bytes).  For context switch intensive application, we found
that significant amount of cache misses occurs in switch_to() function.
The following patch adds a hook in the schedule() function to prefetch
switch stack structure as soon as 'next' task is determined.  This allows
maximum overlap in prefetch cache lines for that structure.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:31 -07:00
Jason Baron
b0d62e6d5b [PATCH] fix disassociate_ctty vs. fork race
Race is as follows. Process A forks process B, both being part of the same
session. Then, A calls disassociate_ctty while B forks C:

A				B
====				====
				fork()
				  copy_signal()
dissasociate_ctty()		....
				  attach_pid(p, PIDTYPE_SID, p->signal->session);

Now, C can have current->signal->tty pointing to a freed tty structure, as
it hasn't yet been added to the session group (to have its controlling tty
cleared on the diassociate_ctty() call).

This has shown up as an oops but could be even more serious.  I haven't
tried to create a test case, but a customer has verified that the patch
below resolves the issue, which was occuring quite frequently.  I'll try
and post the test case if i can.

The patch simply checks for a NULL tty *after* it has been attached to the
proper session group and clears it as necessary.  Alternatively, we could
simply do the tty assignment after the the process is added to the proper
session group.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:31 -07:00
Giancarlo Formicuccia
4b5d37ac02 [PATCH] Clear task_struct->fs_excl on fork()
An oversight.  We don't want to carry the IO scheduler's "we hold exclusive fs
resources" hint over to the child across fork().

Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:56:43 -07:00
Len Brown
64e47488c9 Merge linux-2.6 with linux-acpi-2.6 2005-09-08 01:45:47 -04:00
Linus Torvalds
0dd7f883a9 Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 2005-09-07 17:28:25 -07:00
Keshavamurthy Anil S
deac66ae45 [PATCH] kprobes: fix bug when probed on task and isr functions
This patch fixes a race condition where in system used to hang or sometime
crash within minutes when kprobes are inserted on ISR routine and a task
routine.

The fix has been stress tested on i386, ia64, pp64 and on x86_64.  To
reproduce the problem insert kprobes on schedule() and do_IRQ() functions
and you should see hang or system crash.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:01 -07:00
Prasanna S Panchamukhi
d0aaff9796 [PATCH] Kprobes: prevent possible race conditions generic
There are possible race conditions if probes are placed on routines within the
kprobes files and routines used by the kprobes.  For example if you put probe
on get_kprobe() routines, the system can hang while inserting probes on any
routine such as do_fork().  Because while inserting probes on do_fork(),
register_kprobes() routine grabs the kprobes spin lock and executes
get_kprobe() routine and to handle probe of get_kprobe(), kprobes_handler()
gets executed and tries to grab kprobes spin lock, and spins forever.  This
patch avoids such possible race conditions by preventing probes on routines
within the kprobes file and routines used by kprobes.

I have modified the patches as per Andi Kleen's suggestion to move kprobes
routines and other routines used by kprobes to a seperate section
.kprobes.text.

Also moved page fault and exception handlers, general protection fault to
.kprobes.text section.

These patches have been tested on i386, x86_64 and ppc64 architectures, also
compiled on ia64 and sparc64 architectures.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:59 -07:00
Pekka J Enberg
dd3927105b [PATCH] introduce and use kzalloc
This patch introduces a kzalloc wrapper and converts kernel/ to use it.  It
saves a little program text.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:45 -07:00
Miklos Szeredi
ab8d11beb4 [PATCH] remove duplicated code from proc and ptrace
Extract common code used by ptrace_attach() and may_ptrace_attach()
into a separate function.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:43 -07:00
John Hawkes
0811bab24f [PATCH] cpusets: re-enable "dynamic sched domains"
Revert the hack introduced last week.

Signed-off-by: John Hawkes <hawkes@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:41 -07:00
John Hawkes
d1b551386a [PATCH] cpusets: fix the "dynamic sched domains" bug
For a NUMA system with multiple CPUs per node, declaring a cpu-exclusive
cpuset that includes only some, but not all, of the CPUs in a node will mangle
the sched domain structures.

Signed-off-by: John Hawkes <hawkes@sgi.com>
Cc; Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:41 -07:00
John Hawkes
9c1cfda20a [PATCH] cpusets: Move the ia64 domain setup code to the generic code
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:40 -07:00
Paul Jackson
ef08e3b498 [PATCH] cpusets: confine oom_killer to mem_exclusive cpuset
Now the real motivation for this cpuset mem_exclusive patch series seems
trivial.

This patch keeps a task in or under one mem_exclusive cpuset from provoking an
oom kill of a task under a non-overlapping mem_exclusive cpuset.  Since only
interrupt and GFP_ATOMIC allocations are allowed to escape mem_exclusive
containment, there is little to gain from oom killing a task under a
non-overlapping mem_exclusive cpuset, as almost all kernel and user memory
allocation must come from disjoint memory nodes.

This patch enables configuring a system so that a runaway job under one
mem_exclusive cpuset cannot cause the killing of a job in another such cpuset
that might be using very high compute and memory resources for a prolonged
time.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:40 -07:00
Paul Jackson
9bf2229f88 [PATCH] cpusets: formalize intermediate GFP_KERNEL containment
This patch makes use of the previously underutilized cpuset flag
'mem_exclusive' to provide what amounts to another layer of memory placement
resolution.  With this patch, there are now the following four layers of
memory placement available:

 1) The whole system (interrupt and GFP_ATOMIC allocations can use this),
 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use),
 3) The current tasks cpuset (GFP_USER allocations constrained to here), and
 4) Specific node placement, using mbind and set_mempolicy.

These nest - each layer is a subset (same or within) of the previous.

Layer (2) above is new, with this patch.  The call used to check whether a
zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is
extended to take a gfp_mask argument, and its logic is extended, in the case
that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset
hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if
placement is allowed.  The definition of GFP_USER, which used to be identical
to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous
cpuset_gfp_hardwall_flag patch.

GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks
cpuset, so long as any node therein is not too tight on memory, but will
escape to the larger layer, if need be.

The intended use is to allow something like a batch manager to handle several
jobs, each job in its own cpuset, but using common kernel memory for caches
and such.  Swapper and oom_kill activity is also constrained to Layer (2).  A
task in or below one mem_exclusive cpuset should not cause swapping on nodes
in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a
task in another such cpuset.  Heavy use of kernel memory for i/o caching and
such by one job should not impact the memory available to jobs in other
non-overlapping mem_exclusive cpusets.

This patch enables providing hardwall, inescapable cpusets for memory
allocations of each job, while sharing kernel memory allocations between
several jobs, in an enclosing mem_exclusive cpuset.

Like Dinakar's patch earlier to enable administering sched domains using the
cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag
that had previously done nothing much useful other than restrict what cpuset
configurations were allowed.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:40 -07:00
Pekka Enberg
39ed3fdeec [PATCH] futex: remove duplicate code
This patch cleans up the error path of futex_fd() by removing duplicate
code.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:33 -07:00
Oleg Nesterov
e752dd6cc6 [PATCH] fix send_sigqueue() vs thread exit race
posix_timer_event() first checks that the thread (SIGEV_THREAD_ID case)
does not have PF_EXITING flag, then it calls send_sigqueue() which locks
task list.  But if the thread exits in between the kernel will oops
(->sighand == NULL after __exit_sighand).

This patch moves the PF_EXITING check into the send_sigqueue(), it must be
done atomically under tasklist_lock.  When send_sigqueue() detects exiting
thread it returns -1.  In that case posix_timer_event will send the signal
to thread group.

Also, this patch fixes task_struct use-after-free in posix_timer_event.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:33 -07:00
Jesper Juhl
0730ded5be [PATCH] remove a redundant variable in sys_prctl()
The patch removes a redundant variable `sig' from sys_prctl().

For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG
then the value of arg2 is assigned to an int variable named sig.  Then sig
is tested with valid_signal() and later used to set the value of
current->pdeath_signal .

There is no reason to use this intermediate variable since valid_signal()
takes a unsigned long argument, so it can handle being passed arg2
directly, and if the call to valid_signal is OK, then we know the value of
arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int
and thus there's no problem assigning it later to current->pdeath_signal
(which is an int).

The patch gets rid of the pointless variable `sig'.
This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my
system.

Patch has been compile tested, boot tested, and just to make damn sure I
didn't break anything I wrote a quick test app that calls
prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a
unsigned long, and it behaves as expected with and without the patch.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:32 -07:00
Peter Staubach
6c9c0b52b8 [PATCH] largefile support for accounting
There is a problem in the accounting subsystem in the kernel can not
correctly handle files larger than 2GB.  The output file containing the
process accounting data can grow very large if the system is large enough
and active enough.  If the 2GB limit is reached, then the system simply
stops storing process accounting data.

Another annoying problem is that once the system reaches this 2GB limit,
then every process which exits will receive a signal, SIGXFSZ.  This signal
is generated because an attempt was made to write beyond the limit for the
file descriptor.  This signal makes it look like every process has exited
due to a signal, when in fact, they have not.

The solution is to add the O_LARGEFILE flag to the list of flags used to
open the accounting file.  The rest of the accounting support is already
largefile safe.

The changes were tested by constructing a large file (just short of 2GB),
enabling accounting, and then running enough commands to cause the
accounting data generated to increase the size of the file to 2GB.  Without
the changes, the file grows to 2GB and the last command run in the test
script appears to exit due a signal when it has not.  With the changes,
things work as expected and quietly.

There are some user level changes required so that it can deal with
largefiles, but those are being handled separately.

Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:31 -07:00
Oleg Nesterov
bc505a478d [PATCH] do_notify_parent_cldstop() cleanup
This patch simplifies the usage of do_notify_parent_cldstop(), it lessens
the source and .text size slightly, and makes the code (in my opinion) a
bit more readable.

I am sending this patch now because I'm afraid Paul will touch
do_notify_parent_cldstop() really soon, It's better to cleanup first.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:31 -07:00
Karsten Wiese
f26fdd5992 [PATCH] CHECK_IRQ_PER_CPU() to avoid dead code in __do_IRQ()
IRQ_PER_CPU is not used by all architectures.  This patch introduces the
macros ARCH_HAS_IRQ_PER_CPU and CHECK_IRQ_PER_CPU() to avoid the generation
of dead code in __do_IRQ().

ARCH_HAS_IRQ_PER_CPU is defined by architectures using IRQ_PER_CPU in their
include/asm_ARCH/irq.h file.

Through grepping the tree I found the following architectures currently use
IRQ_PER_CPU:

        cris, ia64, ppc, ppc64 and parisc.

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:29 -07:00
Mika Kukkonen
230649da7c [PATCH] create_workqueue_thread() signedness fix
With "-W -Wno-unused -Wno-sign-compare" I get the following compile warning:

  CC      kernel/workqueue.o
kernel/workqueue.c: In function `workqueue_cpu_callback':
kernel/workqueue.c:504: warning: ordered comparison of pointer with integer zero

On error create_workqueue_thread() returns NULL, not negative pointer, so
following trivial patch suggests itself.

Signed-off-by: Mika Kukkonen <mikukkon@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:28 -07:00
Thomas Koeller
378bac820b [PATCH] flush icache early when loading module
Change the sequence of operations performed during module loading to flush
the instruction cache before module parameters are processed.  If a module
has parameters of an unusual type that cannot be handled using the standard
accessor functions param_set_xxx and param_get_xxx, it has to to provide a
set of accessor functions for this type.  This requires module code to be
executed during parameter processing, which is of course only possible
after the icache has been flushed.

Signed-off-by: Thomas Koeller <thomas@koeller.dyndns.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:26 -07:00
Alex Williamson
486d46aefe [PATCH] optimize writer path in time_interpolator_get_counter()
Christoph Lameter <clameter@engr.sgi.com>

When using a time interpolator that is susceptible to jitter there's
potentially contention over a cmpxchg used to prevent time from going
backwards.  This is unnecessary when the caller holds the xtime write
seqlock as all readers will be blocked from returning until the write is
complete.  We can therefore allow writers to insert a new value and exit
rather than fight with CPUs who only hold a reader lock.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:24 -07:00
David Howells
fe21773d65 [PATCH] Provide better printk() support for SMP machines
The attached patch prevents oopses interleaving with characters from
other printks on other CPUs by only breaking the lock if the oops is
happening on the machine holding the lock.

It might be better if the oops generator got the lock and then called an
inner vprintk routine that assumed the caller holds the lock, thus
making oops reports "atomic".

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:18 -07:00
Ingo Molnar
8446f1d391 [PATCH] detect soft lockups
This patch adds a new kernel debug feature: CONFIG_DETECT_SOFTLOCKUP.

When enabled then per-CPU watchdog threads are started, which try to run
once per second.  If they get delayed for more than 10 seconds then a
callback from the timer interrupt detects this condition and prints out a
warning message and a stack dump (once per lockup incident).  The feature
is otherwise non-intrusive, it doesnt try to unlock the box in any way, it
only gets the debug info out, automatically, and on all CPUs affected by
the lockup.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:17 -07:00
Jakub Jelinek
4732efbeb9 [PATCH] FUTEX_WAKE_OP: pthread_cond_signal() speedup
ATM pthread_cond_signal is unnecessarily slow, because it wakes one waiter
(which at least on UP usually means an immediate context switch to one of
the waiter threads).  This waiter wakes up and after a few instructions it
attempts to acquire the cv internal lock, but that lock is still held by
the thread calling pthread_cond_signal.  So it goes to sleep and eventually
the signalling thread is scheduled in, unlocks the internal lock and wakes
the waiter again.

Now, before 2003-09-21 NPTL was using FUTEX_REQUEUE in pthread_cond_signal
to avoid this performance issue, but it was removed when locks were
redesigned to the 3 state scheme (unlocked, locked uncontended, locked
contended).

Following scenario shows why simply using FUTEX_REQUEUE in
pthread_cond_signal together with using lll_mutex_unlock_force in place of
lll_mutex_unlock is not enough and probably why it has been disabled at
that time:

The number is value in cv->__data.__lock.
        thr1            thr2            thr3
0       pthread_cond_wait
1       lll_mutex_lock (cv->__data.__lock)
0       lll_mutex_unlock (cv->__data.__lock)
0       lll_futex_wait (&cv->__data.__futex, futexval)
0                       pthread_cond_signal
1                       lll_mutex_lock (cv->__data.__lock)
1                                       pthread_cond_signal
2                                       lll_mutex_lock (cv->__data.__lock)
2                                         lll_futex_wait (&cv->__data.__lock, 2)
2                       lll_futex_requeue (&cv->__data.__futex, 0, 1, &cv->__data.__lock)
                          # FUTEX_REQUEUE, not FUTEX_CMP_REQUEUE
2                       lll_mutex_unlock_force (cv->__data.__lock)
0                         cv->__data.__lock = 0
0                         lll_futex_wake (&cv->__data.__lock, 1)
1       lll_mutex_lock (cv->__data.__lock)
0       lll_mutex_unlock (cv->__data.__lock)
          # Here, lll_mutex_unlock doesn't know there are threads waiting
          # on the internal cv's lock

Now, I believe it is possible to use FUTEX_REQUEUE in pthread_cond_signal,
but it will cost us not one, but 2 extra syscalls and, what's worse, one of
these extra syscalls will be done for every single waiting loop in
pthread_cond_*wait.

We would need to use lll_mutex_unlock_force in pthread_cond_signal after
requeue and lll_mutex_cond_lock in pthread_cond_*wait after lll_futex_wait.

Another alternative is to do the unlocking pthread_cond_signal needs to do
(the lock can't be unlocked before lll_futex_wake, as that is racy) in the
kernel.

I have implemented both variants, futex-requeue-glibc.patch is the first
one and futex-wake_op{,-glibc}.patch is the unlocking inside of the kernel.
 The kernel interface allows userland to specify how exactly an unlocking
operation should look like (some atomic arithmetic operation with optional
constant argument and comparison of the previous futex value with another
constant).

It has been implemented just for ppc*, x86_64 and i?86, for other
architectures I'm including just a stub header which can be used as a
starting point by maintainers to write support for their arches and ATM
will just return -ENOSYS for FUTEX_WAKE_OP.  The requeue patch has been
(lightly) tested just on x86_64, the wake_op patch on ppc64 kernel running
32-bit and 64-bit NPTL and x86_64 kernel running 32-bit and 64-bit NPTL.

With the following benchmark on UP x86-64 I get:

for i in nptl-orig nptl-requeue nptl-wake_op; do echo time elf/ld.so --library-path .:$i /tmp/bench; \
for j in 1 2; do echo ( time elf/ld.so --library-path .:$i /tmp/bench ) 2>&1; done; done
time elf/ld.so --library-path .:nptl-orig /tmp/bench
real 0m0.655s user 0m0.253s sys 0m0.403s
real 0m0.657s user 0m0.269s sys 0m0.388s
time elf/ld.so --library-path .:nptl-requeue /tmp/bench
real 0m0.496s user 0m0.225s sys 0m0.271s
real 0m0.531s user 0m0.242s sys 0m0.288s
time elf/ld.so --library-path .:nptl-wake_op /tmp/bench
real 0m0.380s user 0m0.176s sys 0m0.204s
real 0m0.382s user 0m0.175s sys 0m0.207s

The benchmark is at:
http://sourceware.org/ml/libc-alpha/2005-03/txt00001.txt
Older futex-requeue-glibc.patch version is at:
http://sourceware.org/ml/libc-alpha/2005-03/txt00002.txt
Older futex-wake_op-glibc.patch version is at:
http://sourceware.org/ml/libc-alpha/2005-03/txt00003.txt
Will post a new version (just x86-64 fixes so that the patch
applies against pthread_cond_signal.S) to libc-hacker ml soon.

Attached is the kernel FUTEX_WAKE_OP patch as well as a simple-minded
testcase that will not test the atomicity of the operation, but at least
check if the threads that should have been woken up are woken up and
whether the arithmetic operation in the kernel gave the expected results.

Acked-by: Ingo Molnar <mingo@redhat.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Jamie Lokier <jamie@shareable.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:17 -07:00
Pavel Machek
d7ae79c72d [PATCH] swsusp: update documentation
This updates documentation a bit (mostly removing obsolete stuff), and
marks swsusp as no longer experimental in config.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:16 -07:00
Ashok Raj
54d5d42404 [PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity
When handling writes to /proc/irq, current code is re-programming rte
entries directly. This is not recommended and could potentially cause
chipset's to lockup, or cause missing interrupts.

CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the
interrupt is pending. The same needs to be done for /proc/irq handling as well.
Otherwise user space irq balancers are really not doing the right thing.

- Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for
  lack of a generic name.
- added move_irq out of IRQ_BALANCE, and added this same to X86_64
- Added new proc handler for write, so we can do deferred write at irq
  handling time.
- Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead
  it now shows only active cpu masks, or exactly what was set.
- Provided a common move_irq implementation, instead of duplicating
  when using generic irq framework.

Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off.
Tested UP builds as well.

MSI testing: tbd: I have cards, need to look for a x-over cable, although I
did test an earlier version of this patch.  Will test in a couple days.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Zwane Mwaikambo <zwane@holomorphy.com>
Grudgingly-acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:15 -07:00
Jeff Garzik
344babaa9d [kernel-doc] fix various DocBook build problems/warnings
Most serious is fixing include/sound/pcm.h, which breaks the DocBook
build.

The other stuff is just filling in things that cause warnings.
2005-09-07 01:15:17 -04:00
Laurent Vivier
ed75e8d580 [PATCH] UML Support - Ptrace: adds the host SYSEMU support, for UML and general usage
Jeff Dike <jdike@addtoit.com>,
      Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>,
      Bodo Stroesser <bstroesser@fujitsu-siemens.com>

Adds a new ptrace(2) mode, called PTRACE_SYSEMU, resembling PTRACE_SYSCALL
except that the kernel does not execute the requested syscall; this is useful
to improve performance for virtual environments, like UML, which want to run
the syscall on their own.

In fact, using PTRACE_SYSCALL means stopping child execution twice, on entry
and on exit, and each time you also have two context switches; with SYSEMU you
avoid the 2nd stop and so save two context switches per syscall.

Also, some architectures don't have support in the host for changing the
syscall number via ptrace(), which is currently needed to skip syscall
execution (UML turns any syscall into getpid() to avoid it being executed on
the host).  Fixing that is hard, while SYSEMU is easier to implement.

* This version of the patch includes some suggestions of Jeff Dike to avoid
  adding any instructions to the syscall fast path, plus some other little
  changes, by myself, to make it work even when the syscall is executed with
  SYSENTER (but I'm unsure about them). It has been widely tested for quite a
  lot of time.

* Various fixed were included to handle the various switches between
  various states, i.e. when for instance a syscall entry is traced with one of
  PT_SYSCALL / _SYSEMU / _SINGLESTEP and another one is used on exit.
  Basically, this is done by remembering which one of them was used even after
  the call to ptrace_notify().

* We're combining TIF_SYSCALL_EMU with TIF_SYSCALL_TRACE or TIF_SINGLESTEP
  to make do_syscall_trace() notice that the current syscall was started with
  SYSEMU on entry, so that no notification ought to be done in the exit path;
  this is a bit of a hack, so this problem is solved in another way in next
  patches.

* Also, the effects of the patch:
"Ptrace - i386: fix Syscall Audit interaction with singlestep"
are cancelled; they are restored back in the last patch of this series.

Detailed descriptions of the patches doing this kind of processing follow (but
I've already summed everything up).

* Fix behaviour when changing interception kind #1.

  In do_syscall_trace(), we check the status of the TIF_SYSCALL_EMU flag
  only after doing the debugger notification; but the debugger might have
  changed the status of this flag because he continued execution with
  PTRACE_SYSCALL, so this is wrong.  This patch fixes it by saving the flag
  status before calling ptrace_notify().

* Fix behaviour when changing interception kind #2:
  avoid intercepting syscall on return when using SYSCALL again.

  A guest process switching from using PTRACE_SYSEMU to PTRACE_SYSCALL
  crashes.

  The problem is in arch/i386/kernel/entry.S.  The current SYSEMU patch
  inhibits the syscall-handler to be called, but does not prevent
  do_syscall_trace() to be called after this for syscall completion
  interception.

  The appended patch fixes this.  It reuses the flag TIF_SYSCALL_EMU to
  remember "we come from PTRACE_SYSEMU and now are in PTRACE_SYSCALL", since
  the flag is unused in the depicted situation.

* Fix behaviour when changing interception kind #3:
  avoid intercepting syscall on return when using SINGLESTEP.

  When testing 2.6.9 and the skas3.v6 patch, with my latest patch and had
  problems with singlestepping on UML in SKAS with SYSEMU.  It looped
  receiving SIGTRAPs without moving forward.  EIP of the traced process was
  the same for all SIGTRAPs.

What's missing is to handle switching from PTRACE_SYSCALL_EMU to
PTRACE_SINGLESTEP in a way very similar to what is done for the change from
PTRACE_SYSCALL_EMU to PTRACE_SYSCALL_TRACE.

I.e., after calling ptrace(PTRACE_SYSEMU), on the return path, the debugger is
notified and then wake ups the process; the syscall is executed (or skipped,
when do_syscall_trace() returns 0, i.e.  when using PTRACE_SYSEMU), and
do_syscall_trace() is called again.  Since we are on the return path of a
SYSEMU'd syscall, if the wake up is performed through ptrace(PTRACE_SYSCALL),
we must still avoid notifying the parent of the syscall exit.  Now, this
behaviour is extended even to resuming with PTRACE_SINGLESTEP.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Pavel Machek
57c4ce3cbf [PATCH] pm: clean up /sys/power/disk
Clean code up a bit, and only show suspend to disk as available when
it is configured in.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:18 -07:00
Pavel Machek
6161b2ce81 [PATCH] pm: fix process freezing
If process freezing fails, some processes are frozen, and rest are left in
"were asked to be frozen" state.  Thats wrong, we should leave it in some
consistent state.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Pavel Machek
99dc7d63e0 [PATCH] swsusp: fix error handling and cleanups
Drop printing during normal boot (when no image exists in swap), print
message when drivers fail, fix error paths and consolidate near-identical
functions in disk.c (and functions with just one statement).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Shaohua Li
dd5d666b79 [PATCH] swsusp: add locking to software_resume
It is trying to protect swsusp_resume_device and software_resume() from two
users banging it from userspace at the same time.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Michal Schmidt
56057e1a12 [PATCH] swsusp: simpler calculation of number of pages in PBE list
The function calc_nr uses an iterative algorithm to calculate the number of
pages needed for the image and the pagedir.  Exactly the same result can be
obtained with a one-line expression.

Note that this was even proved correct ;-).

Signed-off-by: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Andreas Steinmetz
c2ff18f407 [PATCH] encrypt suspend data for easy wiping
The patch protects from leaking sensitive data after resume from suspend.
During suspend a temporary key is created and this key is used to encrypt the
data written to disk.  When, during resume, the data was read back into memory
the temporary key is destroyed which simply means that all data written to
disk during suspend are then inaccessible so they can't be stolen lateron.

Think of the following: you suspend while an application is running that keeps
sensitive data in memory.  The application itself prevents the data from being
swapped out.  Suspend, however, must write these data to swap to be able to
resume lateron.  Without suspend encryption your sensitive data are then
stored in plaintext on disk.  This means that after resume your sensitive data
are accessible to all applications having direct access to the swap device
which was used for suspend.  If you don't need swap after resume these data
can remain on disk virtually forever.  Thus it can happen that your system
gets broken in weeks later and sensitive data which you thought were encrypted
and protected are retrieved and stolen from the swap device.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Pavel Machek
2a23b5d1e1 [PATCH] remove busywait in refrigerator
This should make refrigerator sleep properly, not busywait after the first
schedule() returns.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:14 -07:00
Hugh Dickins
dae06ac43d [PATCH] swap: update swsusp use of swap_info
Aha, swsusp dips into swap_info[], better update it to swap_lock.  It's
bitflipping flags with 0xFF, so get_swap_page will allocate from only the one
chosen device: let's change that to flip SWP_WRITEOK.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:42 -07:00
Len Brown
129521dcc9 Merge linux-2.6 into linux-acpi-2.6 test 2005-09-03 02:44:09 -04:00
Arnaldo Carvalho de Melo
20380731bc [NET]: Fix sparse warnings
Of this type, mostly:

CHECK   net/ipv6/netfilter.c
net/ipv6/netfilter.c:96:12: warning: symbol 'ipv6_netfilter_init' was not declared. Should it be static?
net/ipv6/netfilter.c:101:6: warning: symbol 'ipv6_netfilter_fini' was not declared. Should it be static?

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 16:01:32 -07:00
Patrick McHardy
066286071d [NETLINK]: Add "groups" argument to netlink_kernel_create
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 16:01:11 -07:00
Harald Welte
4fdb3bb723 [NETLINK]: Add properly module refcounting for kernel netlink sockets.
- Remove bogus code for compiling netlink as module
- Add module refcounting support for modules implementing a netlink
  protocol
- Add support for autoloading modules that implement a netlink protocol
  as soon as someone opens a socket for that protocol

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:35:08 -07:00
David Woodhouse
efda945204 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-08-27 14:30:07 +02:00
David Woodhouse
b01f2cc1c3 [AUDIT] Allow filtering on system call success _or_ failure
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-08-27 10:25:43 +01:00
Len Brown
60cfff3516 Auto-update from upstream 2005-08-26 22:11:28 -04:00
Paul Jackson
212d6d2237 [PATCH] completely disable cpu_exclusive sched domain
At the suggestion of Nick Piggin and Dinakar, totally disable
the facility to allow cpu_exclusive cpusets to define dynamic
sched domains in Linux 2.6.13, in order to avoid problems
first reported by John Hawkes (corrupt sched data structures
and kernel oops).

This has been built for ppc64, i386, ia64, x86_64, sparc, alpha.
It has been built, booted and tested for cpuset functionality
on an SN2 (ia64).

Dinakar or Nick - could you verify that it for sure does avoid
the problems Hawkes reported.  Hawkes is out of town, and I don't
have the recipe to reproduce what he found.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26 16:38:47 -07:00
Paul Jackson
ca2f3daf77 [PATCH] undo partial cpu_exclusive sched domain disabling
The partial disabling of Dinakar's new facility to allow
cpu_exclusive cpusets to define dynamic sched domains
doesn't go far enough.  At the suggestion of Nick Piggin
and Dinakar, let us instead totally disable this facility
for 2.6.13, in order to avoid problems first reported
by John Hawkes (corrupt sched data structures and kernel oops).

This patch removes the partial disabling code in 2.6.13-rc7,
in anticipation of the next patch, which will totally disable
it instead.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26 16:38:46 -07:00
Len Brown
09d4a80e66 Merge HEAD from ../from-linus 2005-08-25 12:45:49 -04:00
Len Brown
eb7b6b3264 [ACPI] IA64-related ACPI Kconfig fixes
Build issues were mostly in the ACPI=n case -- don't do that.
Select ACPI from IA64_GENERIC.
Add some missing dependencies on ACPI.

Mark BLACKLIST_YEAR and some laptop-only ACPI drivers
as X86-only.  Let me know when you get an IA64 Laptop.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:14:20 -04:00
Paul Jackson
3725822f7c [PATCH] cpu_exclusive sched domains build fix
As reported by Paul Mackerras <paulus@samba.org>, the previous patch
"cpu_exclusive sched domains fix" broke the ppc64 build with
CONFIC_CPUSET, yielding error messages:

kernel/cpuset.c: In function 'update_cpu_domains':
kernel/cpuset.c:648: error: invalid lvalue in unary '&'
kernel/cpuset.c:648: error: invalid lvalue in unary '&'

On some arch's, the node_to_cpumask() is a function, returning
a cpumask_t.  But the for_each_cpu_mask() requires an lvalue mask.

The following patch fixes this build failure by making a copy
of the cpumask_t on the stack.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 09:40:45 -07:00
Paul Jackson
d10689b68a [PATCH] cpu_exclusive sched domains on partial nodes temp fix
This keeps the kernel/cpuset.c routine update_cpu_domains() from
invoking the sched.c routine partition_sched_domains() if the cpuset in
question doesn't fall on node boundaries.

I have boot tested this on an SN2, and with the help of a couple of ad
hoc printk's, determined that it does indeed avoid calling the
partition_sched_domains() routine on partial nodes.

I did not directly verify that this avoids setting up bogus sched
domains or avoids the oops that Hawkes saw.

This patch imposes a silent artificial constraint on which cpusets can
be used to define dynamic sched domains.

This patch should allow proceeding with this new feature in 2.6.13 for
the configurations in which it is useful (node alligned sched domains)
while avoiding trying to setup sched domains in the less useful cases
that can cause the kernel corruption and oops.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Acked-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 20:02:52 -07:00
David Meybohm
4c5640cb5f [PATCH] preempt race in getppid
With CONFIG_PREEMPT && !CONFIG_SMP, it's possible for sys_getppid to
return a bogus value if the parent's task_struct gets reallocated after
current->group_leader->real_parent is read:

        asmlinkage long sys_getppid(void)
        {
                int pid;
                struct task_struct *me = current;
                struct task_struct *parent;

                parent = me->group_leader->real_parent;
RACE HERE =>    for (;;) {
                        pid = parent->tgid;
        #ifdef CONFIG_SMP
        {
                        struct task_struct *old = parent;

                        /*
                         * Make sure we read the pid before re-reading the
                         * parent pointer:
                         */
                        smp_rmb();
                        parent = me->group_leader->real_parent;
                        if (old != parent)
                                continue;
        }
        #endif
                        break;
                }
                return pid;
        }

If the process gets preempted at the indicated point, the parent process
can go ahead and call exit() and then get wait()'d on to reap its
task_struct. When the preempted process gets resumed, it will not do any
further checks of the parent pointer on !CONFIG_SMP: it will read the
bad pid and return.

So, the same algorithm used when SMP is enabled should be used when
preempt is enabled, which will recheck ->real_parent in this case.

Signed-off-by: David Meybohm <dmeybohmlkml@bellsouth.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 11:44:29 -07:00
Matt Mackall
024f474795 [PATCH] Make RLIMIT_NICE ranges consistent with getpriority(2)
As suggested by Michael Kerrisk <mtk-manpages@gmx.net>, make RLIMIT_NICE
consistent with getpriority before it becomes available in released glibc.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-18 12:53:58 -07:00
Bhavesh P. Davda
dd12f48d4e [PATCH] NPTL signal delivery deadlock fix
This bug is quite subtle and only happens in a very interesting
situation where a real-time threaded process is in the middle of a
coredump when someone whacks it with a SIGKILL.  However, this deadlock
leaves the system pretty hosed and you have to reboot to recover.

Not good for real-time priority-preemption applications like our
telephony application, with 90+ real-time (SCHED_FIFO and SCHED_RR)
processes, many of them multi-threaded, interacting with each other for
high volume call processing.

Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17 12:52:04 -07:00
Amy Griffis
3c789a1905 AUDIT: Prevent duplicate syscall rules
The following patch against audit.81 prevents duplicate syscall rules in
a given filter list by walking the list on each rule add.

I also removed the unused struct audit_entry in audit.c and made the
static inlines in auditsc.c consistent.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-08-17 16:05:35 +01:00
David Woodhouse
c389649594 AUDIT: Speed up audit_filter_syscall() for the non-auditable case.
It was showing up fairly high on profiles even when no rules were set.
Make sure the common path stays as fast as possible.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-08-17 14:49:57 +01:00
David Woodhouse
413a1c7520 AUDIT: Fix task refcount leak in audit_filter_syscall()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-08-17 14:45:55 +01:00
David Woodhouse
327b6b08d6 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-08-17 14:37:55 +01:00
James Bottomley
6068674437 [PATCH] remove name length check in a workqueue
We have a chek in there to make sure that the name won't overflow
task_struct.comm[], but it's triggering for scsi with lots of HBAs, only
scsi is using single-threaded workqueues which don't append the "/%d"
anyway.

All too hard.  Just kill the BUG_ON.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>

[ kthread_create() uses vsnprintf() and limits the thing, so no
  actual overflow can actually happen regardless ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-10 11:55:19 -07:00
Paul Jackson
3077a260e9 [PATCH] cpuset release ABBA deadlock fix
Fix possible cpuset_sem ABBA deadlock if 'notify_on_release' set.

For a particular usage pattern, creating and destroying cpusets fairly
frequently using notify_on_release, on a very large system, this deadlock
can be seen every few days.  If you are not using the cpuset
notify_on_release feature, you will never see this deadlock.

The existing code, on task exit (or cpuset deletion) did:

  get cpuset_sem
  if cpuset marked notify_on_release and is ready to release:
    compute cpuset path relative to /dev/cpuset mount point
    call_usermodehelper() forks /sbin/cpuset_release_agent with path
  drop cpuset_sem

Unfortunately, the fork in call_usermodehelper can allocate memory, and
allocating memory can require cpuset_sem, if the mems_generation values
changed in the interim.  This results in an ABBA deadlock, trying to obtain
cpuset_sem when it is already held by the current task.

To fix this, I put the cpuset path (which must be computed while holding
cpuset_sem) in a temporary buffer, to be used in the call_usermodehelper
call of /sbin/cpuset_release_agent only _after_ dropping cpuset_sem.

So the new logic is:

  get cpuset_sem
  if cpuset marked notify_on_release and is ready to release:
    compute cpuset path relative to /dev/cpuset mount point
    stash path in kmalloc'd buffer
  drop cpuset_sem
  call_usermodehelper() forks /sbin/cpuset_release_agent with path
  free path

The sharp eyed reader might notice that this patch does not contain any
calls to kmalloc.  The existing code in the check_for_release() routine was
already kmalloc'ing a buffer to hold the cpuset path.  In the old code, it
just held the buffer for a few lines, over the cpuset_release_agent() call
that in turn invoked call_usermodehelper().  In the new code, with the
application of this patch, it returns that buffer via the new char
**ppathbuf parameter, for later use and freeing in cpuset_release_agent(),
which is called after cpuset_sem is dropped.  Whereas the old code has just
one call to cpuset_release_agent(), right in the check_for_release()
routine, the new code has three calls to cpuset_release_agent(), from the
various places that a cpuset can be released.

This patch has been build and booted on SN2, and passed a stress test that
previously hit the deadlock within a few seconds.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-09 12:08:22 -07:00
David Woodhouse
c973b112c7 Merge with /shiny/git/linux-2.6/.git 2005-08-09 16:51:35 +01:00
Andrew Morton
c306895167 [PATCH] revert "timer exit cleanup"
Revert this June 17 patch: it broke persistence of timers across execve().

Cc: Roland McGrath <roland@redhat.com>
Cc: george anzinger <george@mvista.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 16:57:49 -07:00
Benjamin Herrenschmidt
c36f19e02a [PATCH] Remove suspend() calls from shutdown path
This removes the calls to device_suspend() from the shutdown path that
were added sometime during 2.6.13-rc*.  They aren't working properly on
a number of configs (I got reports from both ppc powerbook users and x86
users) causing the system to not shutdown anymore.

I think it isn't the right approach at the moment anyway.  We have
already a shutdown() callback for the drivers that actually care about
shutdown and the suspend() code isn't yet in a good enough shape to be
so much generalized.  Also, the semantics of suspend and shutdown are
slightly different on a number of setups and the way this was patched in
provides little way for drivers to cleanly differenciate.  It should
have been at least a different message.

For 2.6.13, I think we should revert to 2.6.12 behaviour and have a
working suspend back.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 08:20:47 -07:00
Rusty Russell
842bbaaa73 [PATCH] Module per-cpu alignment cannot always be met
The module code assumes noone will ever ask for a per-cpu area more than
SMP_CACHE_BYTES aligned.  However, as these cases show, gcc asks sometimes
asks for 32-byte alignment for the per-cpu section on a module, and if
CONFIG_X86_L1_CACHE_SHIFT is 4, we hit that BUG_ON().  This is obviously an
unusual combination, as there have been few reports, but better to warn
than die.

See:
	http://www.ussg.iu.edu/hypermail/linux/kernel/0409.0/0768.html

And more recently:
	http://bugs.gentoo.org/show_bug.cgi?id=97006

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 21:38:01 -07:00
Ingo Molnar
6cb54819d7 [PATCH] remove sys_set_zone_reclaim()
This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Andrew Morton
c70f5d6610 [PATCH] revert bogus softirq changes
This snuck in with an x86_64 change.  Thanks to Richard Purdie
<rpurdie@rpsys.net> for spotting it.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 10:49:59 -07:00
Eric W. Biederman
1108bae41e [PATCH] reboot: remove device_suspend(PMSG_FREEZE) from kernel_kexec
If device_suspend(PMSG_FREEZE) is not ready to be called in
kernel_restart it is definitely not ready to be called in the even more
fickle kernel_kexec.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29 12:02:09 -07:00
George Anzinger
78fa74a23b [PATCH] posix timers: fix normalization problem
(We found this (after a customer complained) and it is in the kernel.org
kernel.  Seems that for CLOCK_MONOTONIC absolute timers and clock_nanosleep
calls both the request time and wall_to_monotonic are subtracted prior to
the normalize resulting in an overflow in the existing normalize test.
This causes the result to be shifted ~4 seconds ahead instead of ~2 seconds
back in time.)

The normalize code in posix-timers.c fails when the tv_nsec member is ~1.2
seconds negative.  This can happen on absolute timers (and
clock_nanosleeps) requested on CLOCK_MONOTONIC (both the request time and
wall_to_monotonic are subtracted resulting in the possibility of a number
close to -2 seconds.)

This fix uses the set_normalized_timespec() (which does not have an
overflow problem) to fix the problem and as a side effect makes the code
cleaner.

Signed-off-by: George Anzinger <george@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:46:05 -07:00
Andi Kleen
ed6b676ca8 [PATCH] x86_64: Switch to the interrupt stack when running a softirq in local_bh_enable()
This avoids some potential stack overflows with very deep softirq callchains.
i386 does this too.

TOADD CFI annotation

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 21:46:02 -07:00
Andrew Morton
e4ff4d7f9d [PATCH] Avoid device suspend on reboot
My fairly ordinary x86 test box gets stuck during reboot on the
wait_for_completion() in ide_do_drive_cmd():

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:46:37 -07:00
Jesper Juhl
77933d7276 [PATCH] clean up inline static vs static inline
`gcc -W' likes to complain if the static keyword is not at the beginning of
the declaration.  This patch fixes all remaining occurrences of "inline
static" up with "static inline" in the entire kernel tree (140 occurrences in
47 files).

While making this change I came across a few lines with trailing whitespace
that I also fixed up, I have also added or removed a blank line or two here
and there, but there are no functional changes in the patch.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:20 -07:00
Randy Dunlap
e77e17161c [PATCH] kernel/crash_dump.c: add kerneldoc
Add kerneldoc to kernel/crash_dump.c

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:06 -07:00
Randy Dunlap
d9fd8a6d44 [PATCH] kernel/cpuset.c: add kerneldoc, fix typos
Add kerneldoc to kernel/cpuset.c

Fix cpuset typos in init/Kconfig

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:06 -07:00
Randy Dunlap
207a7ba8dc [PATCH] kernel/capability.c: add kerneldoc
Add kerneldoc to kernel/capability.c

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:06 -07:00
Martin Schwidefsky
951f22d5b1 [PATCH] s390: spin lock retry
Split spin lock and r/w lock implementation into a single try which is done
inline and an out of line function that repeatedly tries to get the lock
before doing the cpu_relax().  Add a system control to set the number of
retries before a cpu is yielded.

The reason for the spin lock retry is that the diagnose 0x44 that is used to
give up the virtual cpu is quite expensive.  For spin locks that are held only
for a short period of time the costs of the diagnoses outweights the savings
for spin locks that are held for a longer timer.  The default retry count is
1000.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:04 -07:00
George Anzinger
d912d1ff21 [PATCH] itimer fixes
Fix the recent off-by-one fix in the itimer code:

1. The repeating timer is figured using the requested time
	(not +1 as we know where we are in the jiffie).

2. The tests for interval too large are left to the time_val to jiffie code.

Signed-off-by: George Anzinger <george@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:51 -07:00
Nigel Cunningham
bba0e4670a [PATCH] Address BUG: using smp_processor_id() in preemptible [00000001] code
This patch fixes a warning in the disable_nonboot_cpus call in
kernel/power/smp.c.

Signed-off by: Nigel Cunningham <nigel@suspend2.net>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:25:50 -07:00
David Woodhouse
c5fbc3966f Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-07-27 14:14:13 +01:00
Steven Rostedt
d46523ea32 [PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO
Here's the patch again to fix the code to handle if the values between
MAX_USER_RT_PRIO and MAX_RT_PRIO are different.

Without this patch, an SMP system will crash if the values are
different.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 15:40:00 -07:00
Andreas Steinmetz
18586e7216 [PATCH] Fix RLIMIT_RTPRIO breakage
RLIMIT_RTPRIO is supposed to grant non privileged users the right to use
SCHED_FIFO/SCHED_RR scheduling policies with priorites bounded by the
RLIMIT_RTPRIO value via sched_setscheduler(). This is usually used by
audio users.

Unfortunately this is broken in 2.6.13rc3 as you can see in the excerpt
from sched_setscheduler below:

        /*
         * Allow unprivileged RT tasks to decrease priority:
         */
        if (!capable(CAP_SYS_NICE)) {
                /* can't change policy */
                if (policy != p->policy)
                        return -EPERM;

After the above unconditional test which causes sched_setscheduler to
fail with no regard to the RLIMIT_RTPRIO value the following check is made:

               /* can't increase priority */
                if (policy != SCHED_NORMAL &&
                    param->sched_priority > p->rt_priority &&
                    param->sched_priority >
                                p->signal->rlim[RLIMIT_RTPRIO].rlim_cur)
                        return -EPERM;

Thus I do believe that the RLIMIT_RTPRIO value must be taken into
account for the policy check, especially as the RLIMIT_RTPRIO limit is
of no use without this change.

The attached patch fixes this problem.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 15:30:51 -07:00
Eric W. Biederman
fdde86ac50 [PATCH] swpsuspend: Have suspend to disk use factors of sys_reboot
The suspend to disk code was a poor copy of the code in
sys_reboot now that we have kernel_power_off, kernel_restart
and kernel_halt use them instead of poorly duplicating them inline.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:44 -07:00
Eric W. Biederman
2f048ea81d [PATCH] Call emergency_reboot from panic
We know the system is in trouble so there is no question if this
is an emergecy :)

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:43 -07:00
Eric W. Biederman
ff31977782 [PATCH] Use kernel_power_off in sysrq-o
We already do all of the gymnastics to run from process context
to call the power off code so call into the power off code cleanly.

This especially helps acpi as part of it's shutdown logic should
run acpi_shutdown called from device_shutdown which was not
being called from here.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:43 -07:00
Eric W. Biederman
7c9034735e [PATCH] Add emergency_restart()
When the kernel is working well and we want to restart cleanly
kernel_restart is the function to use.   But in many instances
the kernel wants to reboot when thing are expected to be working
very badly such as from panic or a software watchdog handler.

This patch adds the function emergency_restart() so that
callers can be clear what semantics they expect when calling
restart.  emergency_restart() is expected to be callable
from interrupt context and possibly reliable in even more
trying circumstances.

This is an initial generic implementation for all architectures.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman
abcd9e51f5 [PATCH] Make ctrl_alt_del call kernel_restart to get a proper reboot.
It is obvious we wanted to call kernel_restart here
but since we don't have it the code was expanded inline and hasn't
been correct since sometime in 2.4.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman
4a00ea1e18 [PATCH] Refactor sys_reboot into reusable parts
Because the factors of sys_reboot don't exist people calling
into the reboot path duplicate the code badly, leading to
inconsistent expectations of code in the reboot path.

This patch should is just code motion.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
Eric W. Biederman
47f61f397c [PATCH] Add missing device_suspsend(PMSG_FREEZE) calls.
In the recent addition of device_suspend calls into
sys_reboot two code paths were missed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:41 -07:00
David Woodhouse
39299d9d15 Merge with /shiny/git/linux-2.6/.git 2005-07-19 17:49:39 -04:00
David Woodhouse
ce625a8016 AUDIT: Reduce contention in audit_serial()
... by generating serial numbers only if an audit context is actually
_used_, rather than doing so at syscall entry even when the context
isn't necessarily marked auditable.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-18 14:24:46 -04:00
David Woodhouse
d5b454f2c4 AUDIT: Fix livelock in audit_serial().
The tricks with atomic_t were bizarre. Just do it sensibly instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-15 12:56:03 +01:00
David Woodhouse
351bb72259 AUDIT: Fix compile error in audit_filter_syscall
We didn't rename it to audit_tgid after all. Except once... Doh.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-14 14:40:06 +01:00
David Woodhouse
f55619642e AUDIT: Avoid scheduling in idle thread
When we flush a pending syscall audit record due to audit_free(), we
might be doing that in the context of the idle thread. So use GFP_ATOMIC

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-13 22:47:07 +01:00
David Woodhouse
582edda586 AUDIT: Exempt the whole auditd thread-group from auditing
and not just the one thread.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-13 22:39:34 +01:00
Victor Fusco
6c8c8ba5d7 [AUDIT] Fix sparse warning about gfp_mask type
Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-13 22:26:57 +01:00
Robert Love
0399cb08c5 [PATCH] inotify: move sysctl
This moves the inotify sysctl knobs to "/proc/sys/fs/inotify" from
"/proc/sys/fs".  Also some related cleanup.

Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 11:09:31 -07:00
David Woodhouse
30beab1491 Merge with /shiny/git/linux-2.6/.git 2005-07-13 15:25:59 +01:00
Robert Love
0eeca28300 [PATCH] inotify
inotify is intended to correct the deficiencies of dnotify, particularly
its inability to scale and its terrible user interface:

        * dnotify requires the opening of one fd per each directory
          that you intend to watch. This quickly results in too many
          open files and pins removable media, preventing unmount.
        * dnotify is directory-based. You only learn about changes to
          directories. Sure, a change to a file in a directory affects
          the directory, but you are then forced to keep a cache of
          stat structures.
        * dnotify's interface to user-space is awful.  Signals?

inotify provides a more usable, simple, powerful solution to file change
notification:

        * inotify's interface is a system call that returns a fd, not SIGIO.
	  You get a single fd, which is select()-able.
        * inotify has an event that says "the filesystem that the item
          you were watching is on was unmounted."
        * inotify can watch directories or files.

Inotify is currently used by Beagle (a desktop search infrastructure),
Gamin (a FAM replacement), and other projects.

See Documentation/filesystems/inotify.txt.

Signed-off-by: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 20:38:38 -07:00
Linus Torvalds
3f603ed319 Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-2.6 2005-07-12 16:04:50 -07:00
Hugh Dickins
3b6bfcdb11 [PATCH] lower VM_DONTCOPY total_vm
dup_mmap of a VM_DONTCOPY vma forgot to lower the child's total_vm.  (But
no way does this account for the recent report of total_vm seen too low.)

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:00:58 -07:00
Andrew Morton
d53d9f16ea [PATCH] name_to_dev_t warning fix
kernel/power/disk.c needs a declaration of name_to_dev_t() in scope.  mount.h
seems like an appropriate choice.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:00:58 -07:00
Len Brown
5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00
David Shaohua Li
5ae947ecc9 [ACPI] Suspend to RAM fix
Free some RAM before entering S3 so that upon
resume we can be sure early allocations will succeed.

http://bugzilla.kernel.org/show_bug.cgi?id=3469

Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:21:54 -04:00
Alexey Starikovskiy
e2a5b420f7 [ACPI] ACPI poweroff fix
Register an "acpi" system device to be notified of shutdown preparation.
This depends on CONFIG_PM

http://bugzilla.kernel.org/show_bug.cgi?id=4041

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:20:49 -04:00
Ingo Molnar
5bbcfd9000 [PATCH] cond_resched(): fix bogus might_sleep() warning
The BKS might be reacquired before we have dropped PREEMPT_ACTIVE, which
could trigger a second could trigger a second cond_resched() call.  Bug
found by Hirofumi Ogawa.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:47 -07:00
Christoph Lameter
6c036527a6 [PATCH] mostly_read data section
Add a new section called ".data.read_mostly" for data items that are read
frequently and rarely written to like cpumaps etc.

If these maps are placed in the .data section then these frequenly read
items may end up in cachelines with data is is frequently updated.  In that
case all processors in an SMP system must needlessly reload the cachelines
again and again containing elements of those frequently used variables.

The ability to share these cachelines will allow each cpu in an SMP system
to keep local copies of those shared cachelines thereby optimizing
performance.

Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Christoph Lameter <christoph@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:46 -07:00
Pavel Machek
1322ad4151 [PATCH] pm: clean up process.c
freezeable() already tests for TRACED/STOPPED processes, no need to do it
twice.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:43 -07:00
Pavel Machek
47b724f3fe [PATCH] swsusp: fix error handling
Fix error handling and whitespace in swsusp.c.  swsusp_free() was called when
there was nothing allocating, leading to oops.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:43 -07:00
Pavel Machek
3efa147ad7 [PATCH] pm: Fix resume from initrd
Move device name resolution code around so that it is not called from
resume-from-initrd.  name_to_dev_t may be unavailable at that point.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:23:43 -07:00
Rusty Lynch
6772926bef [PATCH] kprobes: fix namespace problem and sparc64 build
The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:19:00 -07:00
David Woodhouse
21af6c4f2a AUDIT: Really don't audit auditd.
The pid in the audit context isn't always set up. Use tsk->pid when 
checking whether it's auditd in audit_filter_syscall(), instead of 
ctx->pid. Remove a band-aid which did the same elsewhere.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-02 14:10:46 +01:00
David Woodhouse
ac4cec443a AUDIT: Stop waiting for backlog after audit_panic() happens
We force a rate-limit on auditable events by making them wait for space 
on the backlog queue. However, if auditd really is AWOL then this could 
potentially bring the entire system to a halt, depending on the audit 
rules in effect.

Firstly, make sure the wait time is honoured correctly -- it's the 
maximum time the process should wait, rather than the time to wait 
_each_ time round the loop. We were getting re-woken _each_ time a 
packet was dequeued, and the timeout was being restarted each time.

Secondly, reset the wait time after audit_panic() is called. In general 
this will be reset to zero, to allow progress to be made. If the system
is configured to _actually_ panic on audit_panic() then that will 
already have happened; otherwise we know that audit records are being 
lost anyway. 

These two tunables can't be exposed via AUDIT_GET and AUDIT_SET because 
those aren't particularly well-designed. It probably should have been 
done by sysctls or sysfs anyway -- one for a later patch.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-02 14:08:48 +01:00
David Woodhouse
d2f6409584 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-07-02 13:39:09 +01:00
Alan Cox
200803dfe4 [PATCH] irqpoll
Anyone reporting a stuck IRQ should try these options.  Its effectiveness
varies we've found in the Fedora case.  Quite a few systems with misdescribed
IRQ routing just work when you use irqpoll.  It also fixes up the VIA systems
although thats now fixed with the VIA quirk (which we could just make default
as its what Redmond OS does but Linus didn't like it historically).

A small number of systems have jammed IRQ sources or misdescribes that cause
an IRQ that we have no handler registered anywhere for.  In those cases it
doesn't help.

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:35 -07:00
Oleg Nesterov
f01b1b0baa [PATCH] ITIMER_REAL: fix possible deadlock and race
As Steven Rostedt pointed out, there are 2 problems with ITIMER_REAL
timers.

1. do_setitimer() does not call del_timer_sync() in case
   when the timer is not pending (it_real_value() returns 0).
   This is wrong, the timer may still be running, and it can
   rearm itself.

2. It calls del_timer_sync() with tsk->sighand->siglock held.
   This is deadlockable, because timer's handler needs this
   lock too.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:30 -07:00
Luca Falavigna
47f176fdaf [PATCH] Using msleep() instead of HZ
Use msleep() in a few places.

Signed-off-by: Luca Falavigna <dktrkranz@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 21:20:29 -07:00
Ingo Molnar
f340c0d1a3 [PATCH] Tweak idle thread setup semantics
This patch tweaks idle thread setup semantics a bit: instead of setting
NEED_RESCHED in init_idle(), we do an explicit schedule() before calling
into cpu_idle().

This patch, while having no negative side-effects, enables wider use of
cond_resched()s.  (which might happen in the stock kernel too, but it's
particulary important for voluntary-preempt)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 14:56:51 -07:00
Alexey Dobriyan
314b6a4d80 [PATCH] kexec: fix sparse warnings
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 14:53:40 -07:00
Rusty Lynch
802eae7c80 [PATCH] Return probe redesign: architecture independent changes
The following is the second version of the function return probe patches
I sent out earlier this week.  Changes since my last submission include:

* Fix in ppc64 code removing an unneeded call to re-enable preemption
* Fix a build problem in ia64 when kprobes was turned off
* Added another BUG_ON check to each of the architecture trampoline
  handlers

My initial patch description ==>

 From my experiences with adding return probes to x86_64 and ia64, and the
feedback on LKML to those patches, I think we can simplify the design
for return probes.

The following patch tweaks the original design such that:

* Instead of storing the stack address in the return probe instance, the
  task pointer is stored.  This gives us all we need in order to:
    - find the correct return probe instance when we enter the trampoline
      (even if we are recursing)
    - find all left-over return probe instances when the task is going away

  This has the side effect of simplifying the implementation since more
  work can be done in kernel/kprobes.c since architecture specific knowledge
  of the stack layout is no longer required.  Specifically, we no longer have:
	- arch_get_kprobe_task()
	- arch_kprobe_flush_task()
	- get_rp_inst_tsk()
	- get_rp_inst()
	- trampoline_post_handler() <see next bullet>

* Instead of splitting the return probe handling and cleanup logic across
  the pre and post trampoline handlers, all the work is pushed into the
  pre function (trampoline_probe_handler), and then we skip single stepping
  the original function.  In this case the original instruction to be single
  stepped was just a NOP, and we can do without the extra interruption.

The new flow of events to having a return probe handler execute when a target
function exits is:

* At system initialization time, a kprobe is inserted at the beginning of
  kretprobe_trampoline.  kernel/kprobes.c use to handle this on it's own,
  but ia64 needed to do this a little differently (i.e. a function pointer
  is really a pointer to a structure containing the instruction pointer and
  a global pointer), so I added the notion of arch_init(), so that
  kernel/kprobes.c:init_kprobes() now allows architecture specific
  initialization by calling arch_init() before exiting.  Each architecture
  now registers a kprobe on it's own trampoline function.

* register_kretprobe() will insert a kprobe at the beginning of the targeted
  function with the kprobe pre_handler set to arch_prepare_kretprobe
  (still no change)

* When the target function is entered, the kprobe is fired, calling
  arch_prepare_kretprobe (still no change)

* In arch_prepare_kretprobe() we try to get a free instance and if one is
  available then we fill out the instance with a pointer to the return probe,
  the original return address, and a pointer to the task structure (instead
  of the stack address.)  Just like before we change the return address
  to the trampoline function and mark the instance as used.

  If multiple return probes are registered for a given target function,
  then arch_prepare_kretprobe() will get called multiple times for the same
  task (since our kprobe implementation is able to handle multiple kprobes
  at the same address.)  Past the first call to arch_prepare_kretprobe,
  we end up with the original address stored in the return probe instance
  pointing to our trampoline function. (This is a significant difference
  from the original arch_prepare_kretprobe design.)

* Target function executes like normal and then returns to kretprobe_trampoline.

* kprobe inserted on the first instruction of kretprobe_trampoline is fired
  and calls trampoline_probe_handler() (no change here)

* trampoline_probe_handler() consumes each of the instances associated with
  the current task by calling the registered handler function and marking
  the instance as unused until an instance is found that has a return address
  different then the trampoline function.

  (change similar to my previous ia64 RFC)

* If the task is killed with some left-over return probe instances (meaning
  that a target function was entered, but never returned), then we just
  free any instances associated with the task.  (Not much different other
  then we can handle this without calling architecture specific functions.)

  There is a known problem that this patch does not yet solve where
  registering a return probe flush_old_exec or flush_thread will put us
  in a bad state.  Most likely the best way to handle this is to not allow
  registering return probes on these two functions.

  (Significant change)

This patch series applies to the 2.6.12-rc6-mm1 kernel, and provides:
  * kernel/kprobes.c changes
  * i386 patch of existing return probes implementation
  * x86_64 patch of existing return probe implementation
  * ia64 implementation
  * ppc64 implementation (provided by Ananth)

This patch implements the architecture independant changes for a reworking
of the kprobes based function return probes design. Changes include:

  * Removing functions for querying a return probe instance off a stack address
  * Removing the stack_addr field from the kretprobe_instance definition,
    and adding a task pointer
  * Adding architecture specific initialization via arch_init()
  * Removing extern definitions for the architecture trampoline functions
    (this isn't needed anymore since the architecture handles the
     initialization of the kprobe in the return probe trampoline function.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:52 -07:00
Ananth N Mavinakayanahalli
9ec4b1f356 [PATCH] kprobes: fix single-step out of line - take2
Now that PPC64 has no-execute support, here is a second try to fix the
single step out of line during kprobe execution.  Kprobes on x86_64 already
solved this problem by allocating an executable page and using it as the
scratch area for stepping out of line.  Reuse that.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:52 -07:00
Jens Axboe
22e2c507c3 [PATCH] Update cfq io scheduler to time sliced design
This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:33:29 -07:00
Linus Torvalds
2031d0f586 Merge Christoph's freeze cleanup patch 2005-06-25 17:16:53 -07:00
Christoph Lameter
3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Nick Wilson
8c0e33c133 [PATCH] Use ALIGN to remove duplicate code
This patch makes use of ALIGN() to remove duplicate round-up code.

Signed-off-by: Nick Wilson <njw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:25:02 -07:00
Jesper Juhl
5a6b454f80 [PATCH] remove redundant NULL check before before kfree() in kernel/sysctl.c
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:59 -07:00
Domen Puncer
96ec3efdcb [PATCH] kernel/timer: fix msleep_interruptible() comment
The comment for msleep_interruptible() is wrong, as it will ignore
wait-queue events, but will wake up early for signals.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:58 -07:00
Maneesh Soni
72414d3f1d [PATCH] kexec code cleanup
o Following patch provides purely cosmetic changes and corrects CodingStyle
  guide lines related certain issues like below in kexec related files

  o braces for one line "if" statements, "for" loops,
  o more than 80 column wide lines,
  o No space after "while", "for" and "switch" key words

o Changes:
  o take-2: Removed the extra tab before "case" key words.
  o take-3: Put operator at the end of line and space before "*/"

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:55 -07:00
Alexander Nyberg
6e274d1443 [PATCH] kdump: Use real pt_regs from exception
Makes kexec_crashdump() take a pt_regs * as an argument.  This allows to
get exact register state at the point of the crash.  If we come from direct
panic assertion NULL will be passed and the current registers saved before
crashdump.

This hooks into two places:
die(): check the conditions under which we will panic when calling
do_exit and go there directly with the pt_regs that caused the fatal
fault.

die_nmi(): If we receive an NMI lockup while in the kernel use the
pt_regs and go directly to crash_kexec(). We're probably nested up badly
at this point so this might be the only chance to escape with proper
information.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:54 -07:00
Vivek Goyal
666bfddbe8 [PATCH] kdump: Access dump file in elf format (/proc/vmcore)
From: "Vivek Goyal" <vgoyal@in.ibm.com>

o Support for /proc/vmcore interface. This interface exports elf core image
  either in ELF32 or ELF64 format, depending on the format in which elf headers
  have been stored by crashed kernel.
o Added support for CONFIG_VMCORE config option.
o Removed the dependency on /proc/kcore.

From: "Eric W. Biederman" <ebiederm@xmission.com>

This patch has been refactored to more closely match the prevailing style in
the affected files.  And to clearly indicate the dependency between
/proc/kcore and proc/vmcore.c

From: Hariprasad Nellitheertha <hari@in.ibm.com>

This patch contains the code that provides an ELF format interface to the
previous kernel's memory post kexec reboot.

Signed off by Hariprasad Nellitheertha <hari@in.ibm.com>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:53 -07:00
Vivek Goyal
2030eae52b [PATCH] Retrieve elfcorehdr address from command line
This patch adds support for retrieving the address of elf core header if one
is passed in command line.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:53 -07:00
Vivek Goyal
60e64d46a5 [PATCH] kdump: Routines for copying dump pages
This patch provides the interfaces necessary to read the dump contents,
treating it as a high memory device.

Signed off by Hariprasad Nellitheertha <hari@in.ibm.com>
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:53 -07:00
Vivek Goyal
625f1c8219 [PATCH] Kdump: Export crash notes section address through sysfs
o Following patch exports kexec global variable "crash_notes" to user space
  through sysfs as kernel attribute in /sys/kernel.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:51 -07:00
Vivek Goyal
50cccc699e [PATCH] Kexec on panic vmlinux initrd fix
This is a minor bug fix in kexec to resolve the problem of loading panic
kernel with initrd.

o Problem: Loading a capture kenrel fails if initrd is also being loaded.
  This has been observed for vmlinux image for kexec on panic case.

o This patch fixes the problem. In segment location and size verification
  logic, minor correction has been done. Segment memory end (mend) should be
  mstart + memsz - 1. This one byte offset was source of failure for initrd
  loading which was being loaded at hole boundary.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Eric W. Biederman
dc009d9243 [PATCH] kexec: add kexec syscalls
This patch introduces the architecture independent implementation the
sys_kexec_load, the compat_sys_kexec_load system calls.

Kexec on panic support has been integrated into the core patch and is
relatively clean.

In addition the hopefully architecture independent option
crashkernel=size@location has been docuemented.  It's purpose is to reserve
space for the panic kernel to live, and where no DMA transfer will ever be
setup to access.

Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:48 -07:00
Ingo Molnar
f8cbd99bd3 [PATCH] sched: voluntary kernel preemption
This patch adds a new preemption model: 'Voluntary Kernel Preemption'.  The
3 models can be selected from a new menu:

            (X) No Forced Preemption (Server)
            ( ) Voluntary Kernel Preemption (Desktop)
            ( ) Preemptible Kernel (Low-Latency Desktop)

we still default to the stock (Server) preemption model.

Voluntary preemption works by adding a cond_resched()
(reschedule-if-needed) call to every might_sleep() check.  It is lighter
than CONFIG_PREEMPT - at the cost of not having as tight latencies.  It
represents a different latency/complexity/overhead tradeoff.

It has no runtime impact at all if disabled.  Here are size stats that show
how the various preemption models impact the kernel's size:

    text    data     bss     dec     hex filename
 3618774  547184  179896 4345854  424ffe vmlinux.stock
 3626406  547184  179896 4353486  426dce vmlinux.voluntary   +0.2%
 3748414  548640  179896 4476950  445016 vmlinux.preempt     +3.5%

voluntary-preempt is +0.2% of .text, preempt is +3.5%.

This feature has been tested for many months by lots of people (and it's
also included in the RHEL4 distribution and earlier variants were in Fedora
as well), and it's intended for users and distributions who dont want to
use full-blown CONFIG_PREEMPT for one reason or another.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Ingo Molnar
f704f56af9 [PATCH] enable PREEMPT_BKL on !PREEMPT+SMP too
The only sane way to clean up the current 3 lock_kernel() variants seems to
be to remove the spinlock-based BKL implementations altogether, and to keep
the semaphore-based one only.  If we dont want to do that for whatever
reason then i'm afraid we have to live with the current complexity.  (but
i'm open for other cleanup suggestions as well.)

To explore this possibility we'll (at a minimum) have to know whether the
semaphore-based BKL works fine on plain SMP too.  The patch below enables
this.

The patch may make sense in isolation as well, as it might bring
performance benefits: code that would formerly spin on the BKL spinlock
will now schedule away and give up the CPU.  It might introduce performance
regressions as well, if any performance-critical code uses the BKL heavily
and gets overscheduled due to the semaphore.  I very much hope there is no
such performance-critical codepath left though.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Ingo Molnar
cc19ca86a0 [PATCH] consolidate PREEMPT options into kernel/Kconfig.preempt
This patch consolidates the CONFIG_PREEMPT and CONFIG_PREEMPT_BKL
preemption options into kernel/Kconfig.preempt.  This, besides reducing
source-code, also enables more centralized tweaking of preemption related
options.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Dinakar Guniguntala
85d7b94981 [PATCH] Dynamic sched domains: cpuset changes
Adds the core update_cpu_domains code and updated cpusets documentation

Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Acked-by: Paul Jackson <pj@sgi.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Dinakar Guniguntala
1a20ff27ef [PATCH] Dynamic sched domains: sched changes
The following patches add dynamic sched domains functionality that was
extensively discussed on lkml and lse-tech.  I would like to see this added to
-mm

o The main advantage with this feature is that it ensures that the scheduler
  load balacing code only balances against the cpus that are in the sched
  domain as defined by an exclusive cpuset and not all of the cpus in the
  system. This removes any overhead due to load balancing code trying to
  pull tasks outside of the cpu exclusive cpuset only to be prevented by
  the tasks' cpus_allowed mask.
o cpu exclusive cpusets are useful for servers running orthogonal
  workloads such as RT applications requiring low latency and HPC
  applications that are throughput sensitive

o It provides a new API partition_sched_domains in sched.c
  that makes dynamic sched domains possible.
o cpu_exclusive cpusets sets are now associated with a sched domain.
  Which means that the users can dynamically modify the sched domains
  through the cpuset file system interface
o ia64 sched domain code has been updated to support this feature as well
o Currently, this does not support hotplug. (However some of my tests
  indicate hotplug+preempt is currently broken)
o I have tested it extensively on x86.
o This should have very minimal impact on performance as none of
  the fast paths are affected

Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Acked-by: Paul Jackson <pj@sgi.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Olivier Croquette
37e4ab3f0c [PATCH] Changing RT priority without CAP_SYS_NICE
Presently, a process without the capability CAP_SYS_NICE can not change
its own policy, which is OK.

But it can also not decrease its RT priority (if scheduled with policy
SCHED_RR or SCHED_FIFO), which is what this patch changes.

The rationale is the same as for the nice value: a process should be
able to require less priority for itself. Increasing the priority is
still not allowed.

This is for example useful if you give a multithreaded user process a RT
priority, and the process would like to organize its internal threads
using priorities also. Then you can give the process the highest
priority needed N, and the process starts its threads with lower
priorities: N-1, N-2...

The POSIX norm says that the permissions are implementation specific, so
I think we can do that.

In a sense, it makes the permissions consistent whatever the policy is:
with this patch, process scheduled by SCHED_FIFO, SCHED_RR and
SCHED_OTHER can all decrease their priority.

From: Ingo Molnar <mingo@elte.hu>

cleaned up and merged to -mm.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Chen Shang
a3464a102a [PATCH] sched: micro-optimize task requeueing in schedule()
micro-optimize task requeueing in schedule() & clean up recalc_task_prio().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
77391d7168 [PATCH] sched: relax pinned balancing
The maximum rebalance interval allowed by the multiprocessor balancing
backoff is often not large enough to handle corner cases where there are
lots of tasks pinned on a CPU.  Suresh reported:

	I see system livelock's if for example I have 7000 processes
	pinned onto one cpu (this is on the fastest 8-way system I
	have access to).

After this patch, the machine is reported to go well above this number.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
476d139c21 [PATCH] sched: consolidate sbe sbf
Consolidate balance-on-exec with balance-on-fork.  This is made easy by the
sched-domains RCU patches.

As well as the general goodness of code reduction, this allows the runqueues
to be unlocked during balance-on-fork.

schedstats is a problem.  Maybe just have balance-on-event instead of
distinguishing fork and exec?

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
674311d5b4 [PATCH] sched: RCU domains
One of the problems with the multilevel balance-on-fork/exec is that it needs
to jump through hoops to satisfy sched-domain's locking semantics (that is,
you may traverse your own domain when not preemptable, and you may traverse
others' domains when holding their runqueue lock).

balance-on-exec had to potentially migrate between more than one CPU before
finding a final CPU to migrate to, and balance-on-fork needed to potentially
take multiple runqueue locks.

So bite the bullet and make sched-domains go completely RCU.  This actually
simplifies the code quite a bit.

From: Ingo Molnar <mingo@elte.hu>

schedstats RCU fix, and a nice comment on for_each_domain, from Ingo.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
3dbd534207 [PATCH] sched: multilevel sbe sbf
The fundamental problem that Suresh has with balance on exec and fork is that
it only tries to balance the top level domain with the flag set.

This was worked around by removing degenerate domains, but is still a problem
if people want to start using more complex sched-domains, especially
multilevel NUMA that ia64 is already using.

This patch makes balance on fork and exec try balancing over not just the top
most domain with the flag set, but all the way down the domain tree.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Suresh Siddha
245af2c787 [PATCH] sched: remove degenerate domains
Remove degenerate scheduler domains during the sched-domain init.

For example on x86_64, we always have NUMA configured in.  On Intel EM64T
systems, top most sched domain will be of NUMA and with only one sched_group
in it.

With fork/exec balances(recent Nick's fixes in -mm tree), we always endup
taking wrong decisions because of this topmost domain (as it contains only one
group and find_idlest_group always returns NULL).  We will endup loading HT
package completely first, letting active load balance kickin and correct it.

In general, this patch also makes sense with out recent Nick's fixes in -mm.

From: Nick Piggin <nickpiggin@yahoo.com.au>

Modified to account for more than just sched_groups when scanning for
degenerate domains by Nick Piggin.  And allow a runqueue's sd to go NULL
rather than keep a single degenerate domain around (this happens when you run
with maxcpus=1).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Nick Piggin
41c7ce9ad9 [PATCH] sched: null domains
Fix the last 2 places that directly access a runqueue's sched-domain and
assume it cannot be NULL.

That allows the use of NULL for domain, instead of a dummy domain, to signify
no balancing is to happen.  No functional changes.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Nick Piggin
4866cde064 [PATCH] sched: cleanup context switch locking
Instead of requiring architecture code to interact with the scheduler's
locking implementation, provide a couple of defines that can be used by the
architecture to request runqueue unlocked context switches, and ask for
interrupts to be enabled over the context switch.

Also replaces the "switch_lock" used by these architectures with an oncpu
flag (note, not a potentially slow bitflag).  This eliminates one bus
locked memory operation when context switching, and simplifies the
task_running function.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00