Commit Graph

72335 Commits

Author SHA1 Message Date
Rusty Russell
56ae43dfe2 Example launcher handle guests not being ready for input
We currently discard console and network input when the guest has no
input buffers.  This patch changes that, so that we simply stop
listening to that fd until the guest refills its input buffers.

This is particularly important because hvc_console without interrupts
does backoff polling and so often lose characters if we discard.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:56 +10:00
Rusty Russell
17cbca2ba3 Update example launcher for virtio
Implements virtio-based console, network and block servers.  The block
server uses a thread so it's async, which is an improvement over the
old synchronous implementation (but a little more complex).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:56 +10:00
Rusty Russell
19f1537b7b Lguest support for Virtio
This makes lguest able to use the virtio devices.

We change the device descriptor page from a simple array to a variable
length "type, config_len, status, config data..." format, and
implement virtio_config_ops to read from that config data.

We use the virtio ring implementation for an efficient Guest <-> Host
virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the
host when it changes.

We also use LHCALL_NOTIFY on kernel addresses for very very early
console output.  We could have another hypercall, but this hack works
quite well.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:56 +10:00
Rusty Russell
15045275c3 Remove old lguest I/O infrrasructure.
This patch gets rid of the old lguest host I/O infrastructure and
replaces it with a single hypercall "LHCALL_NOTIFY" which takes an
address.

The main change is the removal of io.c: that mainly did inter-guest
I/O, which virtio doesn't yet support.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Rusty Russell
0ca49ca946 Remove old lguest bus and drivers.
This gets rid of the lguest bus, drivers and DMA mechanism, to make
way for a generic virtio mechanism.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Rusty Russell
0a8a69dd77 Virtio helper routines for a descriptor ringbuffer implementation
These helper routines supply most of the virtqueue_ops for hypervisors
which want to use a ring for virtio.  Unlike the previous lguest
implementation:

1) The rings are variable sized (2^n-1 elements).
2) They have an unfortunate limit of 65535 bytes per sg element.
3) The page numbers are always 64 bit (PAE anyone?)
4) They no longer place used[] on a separate page, just a separate
   cacheline.
5) We do a modulo on a variable.  We could be tricky if we cared.
6) Interrupts and notifies are suppressed using flags within the rings.

Users need only get the ring pages and provide a notify hook (KVM
wants the guest to allocate the rings, lguest does it sanely).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
2007-10-23 15:49:55 +10:00
Rusty Russell
b01d9f2863 Module autoprobing support for virtio drivers.
This adds the logic to convert the virtio ids into module aliases, and
includes a modalias entry in sysfs and the env var to make probing work.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Rusty Russell
31610434bc Virtio console driver
This is an hvc-based virtio console driver.  It's suboptimal becuase
hvc expects to have raw access to interrupts and virtio doesn't assume
that, so it currently polls.

There are two solutions: expose hvc's "kick" interface, or wean off hvc.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:55 +10:00
Rusty Russell
e467cde238 Block driver using virtio.
The block driver uses scatter-gather lists with sg[0] being the
request information (struct virtio_blk_outhdr) with the type, sector
and inbuf id.  The next N sg entries are the bio itself, then the last
sg is the status byte.  Whether the N entries are in or out depends on
whether it's a read or a write.

We accept the normal (SCSI) ioctls: they get handed through to the other
side which can then handle it or reply that it's unsupported.  It's
not clear that this actually works in general, since I don't know
if blk_pc_request() requests have an accurate rq_data_dir().

Although we try to reply -ENOTTY on unsupported commands, ioctl(fd,
CDROMEJECT) returns success to userspace.  This needs a separate
patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 15:49:54 +10:00
Rusty Russell
296f96fcfc Net driver using virtio
The network driver uses two virtqueues: one for input packets and one
for output packets.  This has nice locking properties (ie. we don't do
any for recv vs send).

TODO:
	1) Big packets.
	2) Multi-client devices (maybe separate driver?).
	3) Resolve freeing of old xmit skbs (Christian Borntraeger)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: netdev@vger.kernel.org
2007-10-23 15:49:54 +10:00
Rusty Russell
ec3d41c4db Virtio interface
This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms.  It will no-doubt need further enhancement.

The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.

There is also a generic implementation of config space which drivers can query
to get setup information from the host.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2007-10-23 15:49:54 +10:00
Rusty Russell
47436aa4ad Boot with virtual == physical to get closer to native Linux.
1) This allows us to get alot closer to booting bzImages.

2) It means we don't have to know page_offset.

3) The Guest needs to modify the boot pagetables to create the
   PAGE_OFFSET mapping before jumping to C code.

4) guest_pa() walks the page tables rather than using page_offset.

5) We don't use page_offset to figure out whether to emulate: it was
   always kinda quesationable, and won't work for instructions done
   before remapping (bzImage unpacking in particular).

6) We still want the kernel address for tlb flushing: have the initial
   hypercall give us that, too.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:54 +10:00
Rusty Russell
c18acd73ff Allow guest to specify syscall vector to use.
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch).

This patch allows Guests to specify what system call vector they want,
and we try to reserve it.  We only allow one non-Linux system call
vector, to try to avoid DoS on the Host.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:53 +10:00
Rusty Russell
ee3db0f2b6 Rename "cr3" to "gpgdir" to avoid x86-specific naming.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:53 +10:00
Matias Zabaljauregui
df29f43e65 Pagetables to use normal kernel types
This is my first step in the migration of page_tables.c to the kernel
types and functions/macros (2.6.23-rc3).  Seems to be working OK.

Signed-off-by: Matias Zabaljauregui <matias.zabaljauregui@cern.ch>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:53 +10:00
Jes Sorensen
47aee45ae3 lguest.h declares a struct timespec, make it include linux/time.h
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:52 +10:00
Jes Sorensen
d612cde060 Move register setup into i386_core.c
Move setup_regs() to lguest_arch_setup_regs() in i386_core.c given
that this is very architecture specific.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:52 +10:00
Jes Sorensen
511801dc31 Change example launcher to use unsigned long not u32
Apply Clue 2x4 to lguest userland<->kernel handling code and the
lguest launcher. Pointers are not to be passed in u32's!

Basic rule of thumb: Anything passing u32's back and forth should be
passing unsigned longs to be portable to 64 bit archs.

For those who forgotten already, I repeat: NO POINTERS IN u32!

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:52 +10:00
Jes Sorensen
b410e7b149 Make hypercalls arch-independent.
Clean up the hypercall code to make the code in hypercalls.c
architecture independent. First process the common hypercalls and
then call lguest_arch_do_hcall() if the call hasn't been handled.
Rename struct hcall_ring to hcall_args.

This patch requires the previous patch which reorganize the layout of
struct lguest_regs on i386 so they match the layout of struct
hcall_args.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:52 +10:00
Rusty Russell
cc6d4fbcef Introduce "hcall" pointer to indicate pending hypercall.
Currently we look at the "trapnum" to see if the Guest wants a
hypercall.  But once the hypercall is done we have to reset trapnum to
a bogus value, otherwise if we exit to userspace and return, we'd run
the same hypercall twice (that was a nasty bug to find!).

This has two main effects:

1) When Jes's patch changes the hypercall args to be a generic "struct
   hcall_args" we simply change the type of "lg->hcall".  It's set by
   arch code, so if it has to copy args or something it can do so, and
   point "hcall" into lg->arch somewhere.

2) Async hypercalls only get run when an actual hypercall is pending.
   This simplfies the code a little and is a more logical semantic.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:52 +10:00
Jes Sorensen
4614a3a3b6 Reorder guest saved regs to match hyperall order
Move eax next to ebx/ecx/edx in struct lguest_regs on i386, so they
will be located together and allow it to map directly to a struct
hcall_ring entry (which will be renamed struct hcall_args as in a
subsequent patch).

This is in preparation for making the code hcall code architecture
independent.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:51 +10:00
Jes Sorensen
625efab1cd Move i386 part of core.c to x86/core.c.
Separate i386 architecture specific from core.c and move it to
x86/core.c and add x86/lguest.h header file to match.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:51 +10:00
Rusty Russell
56adbe9ddc Make shadow IDT a complete IDT with 256 entries.
This simplifies the code a little, in preparation for allowing
alternate system call vectors in guests (Plan 9 uses 0x40).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:51 +10:00
Rusty Russell
48245cc070 Remove fixed limit on number of guests, and lguests array.
Back when we had all the Guest state in the switcher, we had a fixed
array of them.  This is no longer necessary.

If we switch the network code to using random_ether_addr (46 bits is
enough to avoid clashes), we can get rid of the concept of "guest id"
altogether.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:51 +10:00
Rusty Russell
3c6b5bfa3c Introduce guest mem offset, static link example launcher
In order to avoid problematic special linking of the Launcher, we give
the Host an offset: this means we can use any memory region in the
Launcher as Guest memory rather than insisting on mmap() at 0.

The result is quite pleasing: a number of casts are replaced with
simple additions.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:50 +10:00
Ronald G. Minnich
6649bb7af6 Accept elf files that are valid but have sections that can not be mmap'ed for some reason.
Plan9 kernel binaries don't neatly align their ELF sections to our
page boundaries.

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:50 +10:00
Rusty Russell
1f4e1de4f2 Rename switcher.S to x86/switcher_32.S
lguest uses a "switcher" shim mapped high to bounce between host and
guest.  As lguest becomes less i386-centric, we separate this code
into a subdir.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:50 +10:00
Rusty Russell
34b8867a03 Move lguest guest support to arch/x86.
Lguest has two sides: host support (to launch guests) and guest
support (replacement boot path and paravirt_ops).  This moves the
guest side to arch/x86/lguest where it's closer to related code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
2007-10-23 15:49:50 +10:00
Jes Sorensen
c37ae93d59 Move lguest hcalls to arch-specific header
Move architecture specific portion of lg_hcall code to asm-i386/lg_hcall.h
and have it included from linux/lguest.h.

[Changed to asm-i386/lguest_hcall.h so documentation finds it -RR]

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jes Sorensen <jes@sgi.com>
2007-10-23 15:49:49 +10:00
Tony Breeds
05aa026a62 Clocksource is continuous regardless of the state of the host's TSC.
Currently lguest will spend a lot of of time waking up the host, as it
cannot go tickless (if the [host] TSC has been marked unstable). On my
laptop I was getting ~40% of wakeups from lguest.

With this patch applied, my laptop is much happier!

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:49 +10:00
Rusty Russell
ebac52524d lguest_devices belongs in lguest_bus.c: it's not i386-specific.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:49 +10:00
Rusty Russell
b45d8cb054 Make lguest_launcher.h types userspace-friendly
lguest_launcher.h uses "u32" not "__u32", which sets a bad example.  Fix that,
and include <linux/types.h>.

This means we need to use -I on the Launcher build line so types.h is found.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:49 +10:00
Rusty Russell
9653c4aff9 lguest.txt update
o Describe the new split configurations
o Highlight code documentation in drivers/lguest/README
o Point out necessity of having a getty on /dev/hvc0
o Remove gratuitous "m" in example
o Don't discuss I/O model here, stick to user documentation.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:48 +10:00
Rusty Russell
141341cdae Lguest currently depends on 32-bit x86, not just x86.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:48 +10:00
Jes Sorensen
891ff65ff5 Use copy_to_user() not put_user for struct timespec
Use copy_to_user() when copying a struct timespec to the guest -
put_user() cannot handle two long's in one go on a 64bit arch.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jes Sorensen <jes@sgi.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
2007-10-23 15:49:48 +10:00
Glauber de Oliveira Costa
babed5c002 turn err into errx in lguest call sites
These two callsites should really be errx instead of err, since there is
no errno associated with them in the moment they are issued.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
2007-10-23 15:49:47 +10:00
Rusty Russell
25e82eba3a Remove binfmts.h include from lg.h
It wasn't needed since a very early prototype of lguest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:47 +10:00
Rusty Russell
ee8e7cfe9d Make asm-x86/bootparam.h includable from userspace.
To actually write a bootloader (or, say, the lguest launcher)
currently requires duplication of these structures.  Making them
includable from userspace is much nicer.

We merge the common userspace-required definitions of e820_32/64.h
into e820.h for export.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23 15:49:47 +10:00
Rusty Russell
9525ca0286 Consolidate host virtualization support under Virtualization menu
Move lguest under the virtualization menu.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Avi Kivity <avi@qumranet.com>
2007-10-23 15:49:47 +10:00
Rusty Russell
d3d1c4bdf1 Normalize config options for guest support
1) Group all the "guest OS" support options together, under a PARAVIRT_GUEST
   menu.
2) Make those options select CONFIG_PARAVIRT, as suggested by Andi.
3) Make kconfig help titles consistent.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Zach Amsden <zach@vmware.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Chris Wright <chrisw@sous-sol.org>
2007-10-23 15:49:47 +10:00
Marcelo Tosatti
dba5baf328 [POWERPC] Add Vitaly Bordug as PPC8xx maintainer
Vitaly has been doing most of the 8xx maintenance work.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-23 14:14:38 +10:00
Randy Dunlap
0895e91d60 procfs: fix kernel-doc param warnings
Fix mnt_flush_task() misplaced kernel-doc.
Fix typos in some of the doc text.

Warning(linux-2.6.23-git17//fs/proc/base.c:2280): No description found for parameter 'mnt'
Warning(linux-2.6.23-git17//fs/proc/base.c:2280): No description found for parameter 'pid'
Warning(linux-2.6.23-git17//fs/proc/base.c:2280): No description found for parameter 'tgid'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 19:40:02 -07:00
Randy Dunlap
481968f44e auditsc: fix kernel-doc param warnings
Fix kernel-doc for auditsc parameter changes.

Warning(linux-2.6.23-git17//kernel/auditsc.c:1623): No description found for parameter 'dentry'
Warning(linux-2.6.23-git17//kernel/auditsc.c:1666): No description found for parameter 'dentry'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 19:40:02 -07:00
David Miller
e95d9c6b04 Expand hwif->host_flags so that it fits new flags.
Commit 238e4f142c ("ide: add
IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags") caused a
regression because the host_flags in struct hwif_s wasn't expanded to
cope with the fact that the host flags no longer fit in 16 bits.

Signed-off-by: David S. Miller <davem@davemloft.net>
[ I hate having to add good commit descriptions.  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 19:35:14 -07:00
Linus Torvalds
81f8320f62 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: appletouch - apply idle reset logic to all touchpads
  Input: usbtouchscreen - add support for GoTop tablet devices
  Input: bf54x-keys - return real error when request_irq() fails
  Input: i8042 - export i8042_command()
2007-10-22 19:29:58 -07:00
Linus Torvalds
6d435365dd Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Blackfin arch: use KBUILD_CFLAGS and KBUILD_AFLAGS in Makefile
  Blackfin arch: Javier Herrer writes: fix building when icache and dcache is disabled
2007-10-22 19:29:05 -07:00
Linus Torvalds
0fd56c7033 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: Use new smp_call_function_mask() in kvm_flush_remote_tlbs()
  sched: don't clear PF_VCPU in scheduler
  KVM: Improve local apic timer wraparound handling
  KVM: Fix local apic timer divide by zero
  KVM: Move kvm_guest_exit() after local_irq_enable()
  KVM: x86 emulator: fix access registers for instructions with ModR/M byte and Mod = 3
  KVM: VMX: Force vm86 mode if setting flags during real mode
  KVM: x86 emulator: implement 'movnti mem, reg'
  KVM: VMX: Reset mmu context when entering real mode
  KVM: VMX: Handle NMIs before enabling interrupts and preemption
  KVM: MMU: Set shadow pte atomically in mmu_pte_write_zap_pte()
  KVM: x86 emulator: fix repne/repnz decoding
  KVM: x86 emulator: fix merge screwup due to emulator split
2007-10-22 19:24:17 -07:00
Linus Torvalds
56d61a0e26 Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] 4level-fixup cleanup
  [S390] Cleanup page table definitions.
  [S390] Introduce follow_table in uaccess_pt.c
  [S390] Remove unused user_seg from thread structure.
  [S390] tlb flush fix.
  [S390] kernel: Fix dump on panic for DASDs under LPAR.
  [S390] struct class_device -> struct device conversion.
  [S390] cio: Fix incomplete commit for uevent suppression.
  [S390] cio: Use to_channelpath() for device to channel path conversion.
  [S390] Add per-cpu idle time / idle count sysfs attributes.
  [S390] Update default configuration.
2007-10-22 19:23:34 -07:00
Linus Torvalds
5f48b338cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: ARRAY_SIZE() cleanup
  [SPARC64]: small Makefile cleanups
  [SPARC64]: Stop using __do_IRQ().
  [SPARC64]: Update defconfig.
2007-10-22 19:22:56 -07:00
Linus Torvalds
f09cc910fe Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
  [IPSEC] IPV6: Fix to add tunnel mode SA correctly.
  [NET]: Cut off the queue_mapping field from sk_buff
  [NET]: Hide the queue_mapping field inside netif_subqueue_stopped
  [NET]: Make and use skb_get_queue_mapping
  [NET]: Use the skb_set_queue_mapping where appropriate
  [INET]: Use MODULE_ALIAS_NET_PF_PROTO_TYPE where possible.
  [INET]: Let inet_diag and friends autoload
  [NIU]: Cleanup PAGE_SIZE checks a bit
  [NET]: Fix SKB_WITH_OVERHEAD calculation
  [ATM]: Fix clip module reload crash.
  [TG3]: Update version to 3.85
  [TG3]: PCI command adjustment
  [TG3]: Add management FW version to ethtool report
  [TG3]: Add 5723 support
  [Bluetooth] Convert RFCOMM to use kthread API
  [Bluetooth] Add constant for Bluetooth socket options level
  [Bluetooth] Add support for handling simple eSCO links
  [Bluetooth] Add address and channel attribute to RFCOMM TTY device
  [Bluetooth] Fix wrong argument in debug code of HIDP
  [Bluetooth] Add generic driver for Bluetooth USB devices
  ...
2007-10-22 19:22:33 -07:00