Now that we've stopped using the Linux inode cache when can trivally
support the inode64 mount option on 32bit architectures. As far as the
kernel and most userspace is concerned this works perfectly, but
applications still using really old stat and readdir interfaces will get
an EOVERFLOW error when hitting an inode number not fitting into 32
bits (that problem of course also exists when using these applications
on a 64bit kernel).
Note that because inode64 is simply a mount option we can currently
mount a filesystem having > 32 bit inode numbers and cause a variety of
problems, all this is solved but this patch which enables XFS_BIG_INUMS,
even when inode64 is not used.
(First sent on October 18th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Currently there's no ->open method set for directories on XFS. That
means we don't perform any check for opening too large directories
without O_LARGEFILE, we don't check for shut down filesystems, and we
don't actually do the readahead for the first block in the directory.
Instead of just setting the directories open routine to xfs_file_open
we merge the shutdown check directly into xfs_file_open and create
a new xfs_dir_open that first calls xfs_file_open and then performs
the readahead for block 0.
(First sent on September 29th)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
xfs_log_force_umount may be called very early during log recovery where
If we fail a buffer read in xlog_recover_do_inode_trans we abort the mount.
But at that point log recovery has started delayed writeback of inode
buffers. As part of the aborted mount we try to flush out all delwri
buffers, but at that point we have already freed the superblock, and set
mp->m_sb_bp to NULL, and xfs_log_force_umount which gets called after
the inode buffer writeback trips over it.
Make xfs_log_force_umount a little more careful when accessing mp->m_sb_bp
to avoid this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.
Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.
Credit to Nick Piggin for tripping over the problem.
SGI-PV: 989741
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Pass credentials through dentry_open() so that the COW creds patch can have
SELinux's flush_unauthorized_files() pass the appropriate creds back to itself
when it opens its null chardev.
The security_dentry_open() call also now takes a creds pointer, as does the
dentry_open hook in struct security_operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: xfs@oss.sgi.com
Signed-off-by: James Morris <jmorris@namei.org>
When we are about to add a new item to a transaction in recovery, we need
to check that it is valid first. Currently we just assert that header
magic number matches, but in production systems that is not present and we
add a corrupted transaction to the list to be processed. This results in a
kernel oops later when processing the corrupted transaction.
Instead, if we detect a corrupted transaction, abort recovery and leave
the user to clean up the mess that has occurred.
SGI-PV: 988145
SGI-Modid: xfs-linux-melb:xfs-kern:32356a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When there is no memory left in the system, xfs_buf_get_noaddr()
can fail. If this happens at mount time during xlog_alloc_log()
we fail to catch the error and oops.
Catch the error from xfs_buf_get_noaddr(), and allow other memory
allocations to fail and catch those errors too. Report the error
to the console and fail the mount with ENOMEM.
Tested by manually injecting errors into xfs_buf_get_noaddr() and
xlog_alloc_log().
Version 2:
o remove unnecessary casts of the returned pointer from kmem_zalloc()
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we create a directory, we reserve a number of blocks for the maximum
possible expansion of of the directory due to various btree splits,
freespace allocation, etc. Unfortunately, each allocation is not reflected
in the total number of blocks still available to the transaction, so the
maximal reservation is used over and over again.
This leads to problems where an allocation group has only enough blocks
for *some* of the allocations required for the directory modification.
After the first N allocations, the remaining blocks in the allocation
group drops below the total reservation, and subsequent allocations fail
because the allocator will not allow the allocation to proceed if the AG
does not have the enough blocks available for the entire allocation total.
This results in an ENOSPC occurring after an allocation has already
occurred. This results in aborting the directory operation (leaving the
directory in an inconsistent state) and cancelling a dirty transaction,
which results in a filesystem shutdown.
Avoid the problem by reflecting the number of blocks allocated in any
directory expansion in the total number of blocks available to the
modification in progress. This prevents a directory modification from
being aborted part way through with an ENOSPC.
SGI-PV: 988144
SGI-Modid: xfs-linux-melb:xfs-kern:32340a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's possible to have outstanding xfs_ioend_t's queued when the file size
is zero. This can happen in the direct I/O path when a direct I/O write
fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie
xfs_end_io_direct() does not know that the I/O failed so can't force the
xfs_ioend_t to be flushed synchronously).
When we truncate a file on unlink we don't know to wait for these
xfs_ioend_ts and we can have a use-after-free situation if the inode is
reclaimed before the xfs_ioend_t is finally processed.
As was suggested by Dave Chinner lets wait for all I/Os to complete when
truncating the file size to zero.
SGI-PV: 981668
SGI-Modid: xfs-linux-melb:xfs-kern:32216a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Destroying the quota stuff on unmount can access the log - ie
XFS_QM_DONE() ends up in xfs_dqunlock() which calls
xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the
log has already been destroyed. Just move the cleanup of the quota code
earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving
XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot.
SGI-PV: 987086
SGI-Modid: xfs-linux-melb:xfs-kern:32148a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes()
can find inodes that are still undergoing initialisation. Avoid
them by checking for the the XFS_INEW() flag once we have a reference
on the inode. This flag is cleared once the inode is properly initialised.
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
gcc on ARM warns about an using an uninitialised variable
in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc
on x86_64 is not reporting this warning so it went unnoticed.
Fix the bug by bring the inode radix tree walk code up to
date with xfs_sync_inodes_ag().
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When there is no memory left in the system, xfs_buf_get_noaddr()
can fail. If this happens at mount time during xlog_alloc_log()
we fail to catch the error and oops.
Catch the error from xfs_buf_get_noaddr(), and allow other memory
allocations to fail and catch those errors too. Report the error
to the console and fail the mount with ENOMEM.
Tested by manually injecting errors into xfs_buf_get_noaddr() and
xlog_alloc_log().
Version 2:
o remove unnecessary casts of the returned pointer from kmem_zalloc()
SGI-PV: 987246
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
If we get a race looking up a reclaimable inode, we can end up with the
winner proceeding to use the inode before it has been completely
re-initialised. This is a Bad Thing.
Fix the race by checking whether we are still initialising the inod eonce
we have a reference to it, and if so wait for the initialisation to
complete before continuing.
While there, fix a leaked reference count in the same code when
encountering an unlinked inode and we are not doing a lookup for a create
operation.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32429a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On Linux all filesystems are supposed to be operating under Posix'
restricted chown. Restricted chown means it restricts chown to the owner
unless you have CAP_FOWNER.
NOTE: that 2 files outside of fs/xfs have been modified too for this
change.
Reviewed-by: Dave Chinner <david@fromorbit.com>
SGI-PV: 988919
SGI-Modid: xfs-linux-melb:xfs-kern:32413a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
capable_cred has been unused for a while so we can kill it and sys_cred.
That also means the cred argument to xfs_setattr and xfs_change_file_space
can be removed now.
SGI-PV: 988918
SGI-Modid: xfs-linux-melb:xfs-kern:32412a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Under heavy metadata load we are seeing log hangs. The AIL has items in it
ready to be pushed, and they are within the push target window. However,
we are not pushing them when the last pushed LSN is less than the LSN of
the first log item on the AIL. This is a regression introduced by the AIL
push cursor modifications.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32409a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
To make sure we free the security data inodes need to be freed using the
proper VFS helper (which we also need to export for this). We mark these
inodes bad so we can skip the flush path for them.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32398a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bulkstat only wants the dinode, offset and buffer from a given inode
number. Instead of using xfs_itobp on a fake inode which is complicated
and currently leads to leaks of the security data just use xfs_inotobp
which is designed to do exactly the kind of lookup xfs_bulkstat wants. The
only thing that's missing in xfs_inotobp is a flags paramter that let's us
pass down XFS_IMAP_BULKSTAT, but that can easily added.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32397a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
If we are syncing data in xfs_sync_inodes_ag(), the VFS inode must still
be referencable as the dirty data state is carried on the VFS inode. hence
if we can't get a reference via igrab(), the inode must be in reclaim
which implies that it has no dirty data attached.
Leave such inodes to the reclaim code to flush the dirty inode state to
disk and so avoid attempting to access the VFS inode when it may not exist
in xfs_sync_inodes_ag().
Version 4:
o don't reference linux inode until after igrab() succeeds
Version 3:
o converted unlock/rele to an xfs_iput() call.
Version 2:
o change igrab logic to be more linear
o remove initial reclaimable inode check now that we are using
igrab() failure to find reclaimable inodes
o assert that igrab failure occurs only on reclaimable inodes
o clean up inode locking - only grab the iolock if we are doing
a SYNC_DELWRI call and we have a dirty inode.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32391a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we are inside a radix tree preload region, we cannot sleep. Recently
we moved the inode locking inside the preload region for the inode radix
tree. Fix that, and fix a missed unlock in another error path in the same
code at the same time.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32385a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The dp to ip comment should be for the unconditional xfs_droplink call,
and the "." link obviously only exists for directories, so it should be in
the is_dir conditional.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32374a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
iosizelog shouldn't be the same as iosize but the logarithm of it. Then
again the current biosize option doesn't make much sense to me as it
doesn't set the preferred I/O size as mentioned in the comment next to it
but rather the allocation size and thus is identical to the allocsize
option (except for the missing logarithm). It's also not documented in
Documentation/filesystems/xfs.txt or the mount manpage.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32373a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Noquota should clear all mount options, and not just user and group quota.
Probably doesn't matter very much in real life.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32372a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
No need to parse the mount option into a structure before applying it to
struct xfs_mount.
The content of xfs_start_flags gets merged into xfs_parseargs. Calls
inbetween don't care and can use mount members instead of the args struct.
This patch uncovered that the mount option for shared filesystems wasn't
ever exposed on Linux. The code to handle it is #if 0'ed in this patch
pending a decision on this feature. I'll send a writeup about it to the
list soon.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32371a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When we are about to add a new item to a transaction in recovery, we need
to check that it is valid first. Currently we just assert that header
magic number matches, but in production systems that is not present and we
add a corrupted transaction to the list to be processed. This results in a
kernel oops later when processing the corrupted transaction.
Instead, if we detect a corrupted transaction, abort recovery and leave
the user to clean up the mess that has occurred.
SGI-PV: 988145
SGI-Modid: xfs-linux-melb:xfs-kern:32356a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change all the remaining AIL API functions that are passed struct
xfs_mount pointers to pass pointers directly to the struct xfs_ail being
used. With this conversion, all external access to the AIL is via the
struct xfs_ail. Hence the operation and referencing of the AIL is almost
entirely independent of the xfs_mount that is using it - it is now much
more tightly tied to the log and the items it is tracking in the log than
it is tied to the xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32353a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Add an xfs_ail pointer to log items so that the log items can reference
the AIL directly during callbacks without needed a struct xfs_mount.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32352a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
When we need to go from the log to the AIL, we have to go via the
xfs_mount. Add a xfs_ail pointer to the log so we can go directly to the
AIL associated with the log.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32351a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32350a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
When copying lsn's from the log item to the inode or dquot flush lsn, we
currently grab the AIL lock. We do this because the LSN is a 64 bit
quantity and it needs to be read atomically. The lock is used to guarantee
atomicity for 32 bit platforms.
Make the LSN copying a small function, and make the function used
conditional on BITS_PER_LONG so that 64 bit machines don't need to take
the AIL lock in these places.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32349a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
With the new cursor interface, it makes sense to make all the traversing
code use the cursor interface and make the old one go away. This means
more of the AIL interfacing is done by passing struct xfs_ail pointers
around the place instead of struct xfs_mount pointers.
We can replace the use of xfs_trans_first_ail() in xfs_log_need_covered()
as it is only checking if the AIL is empty. We can do that with a call to
xfs_trans_ail_tail() instead, where a zero LSN returned indicates and
empty AIL...
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32348a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To replace the current generation number ensuring sanity of the AIL
traversal, replace it with an external cursor that is linked to the AIL.
Basically, we store the next item in the cursor whenever we want to drop
the AIL lock to do something to the current item. When we regain the lock.
the current item may already be free, so we can't reference it, but the
next item in the traversal is already held in the cursor.
When we move or delete an object, we search all the active cursors and if
there is an item match we clear the cursor(s) that point to the object.
This forces the traversal to restart transparently.
We don't invalidate the cursor on insert because the cursor still points
to a valid item. If the intem is inserted between the current item and the
cursor it does not matter; the traversal is considered to be past the
insertion point so it will be picked up in the next traversal.
Hence traversal restarts pretty much disappear altogether with this method
of traversal, which should substantially reduce the overhead of pushing on
a busy AIL.
Version 2 o add restart logic o comment cursor interface o minor cleanups
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32347a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Rather than embedding the struct xfs_ail in the struct xfs_mount, allocate
it during AIL initialisation. Add a back pointer to the struct xfs_ail so
that we can pass around the xfs_ail and still be able to access the
xfs_mount if need be. This is th first step involved in isolating the AIL
implementation from the surrounding filesystem code.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32346a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
When we create a directory, we reserve a number of blocks for the maximum
possible expansion of of the directory due to various btree splits,
freespace allocation, etc. Unfortunately, each allocation is not reflected
in the total number of blocks still available to the transaction, so the
maximal reservation is used over and over again.
This leads to problems where an allocation group has only enough blocks
for *some* of the allocations required for the directory modification.
After the first N allocations, the remaining blocks in the allocation
group drops below the total reservation, and subsequent allocations fail
because the allocator will not allow the allocation to proceed if the AG
does not have the enough blocks available for the entire allocation total.
This results in an ENOSPC occurring after an allocation has already
occurred. This results in aborting the directory operation (leaving the
directory in an inconsistent state) and cancelling a dirty transaction,
which results in a filesystem shutdown.
Avoid the problem by reflecting the number of blocks allocated in any
directory expansion in the total number of blocks available to the
modification in progress. This prevents a directory modification from
being aborted part way through with an ENOSPC.
SGI-PV: 988144
SGI-Modid: xfs-linux-melb:xfs-kern:32340a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If the last block of the AG has inodes in it and the AG is an exactly
power-of-2 size then the last inode in the AG points to the last block in
the AG. If we try to find the next inode in the AG by adding one to the
inode number, we increment the inode number past the size of the AG. The
result is that the macro XFS_INO_TO_AGINO() will strip the AG portion of
the inode number and return an inode number of zero.
That is, instead of terminating the lookup loop because we hit the inode
number went outside the valid range for the AG, the search index returns
to zero and we start traversing the radix tree from the start again. This
results in an endless loop in xfs_sync_inodes_ag().
Fix it be detecting if the new search index decreases as a result of
incrementing the current inode number. That indicate an overflow and hence
that we have finished processing the AG so we can terminate the loop.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32335a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Use the reclaim tag to walk the radix tree and find the inodes under
reclaim. This was the only user of the deleted inode list.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32333a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Prepare for removing the deleted inode list by marking inodes for reclaim
in the inode radix trees so that we can use the radix trees to find
reclaimable inodes.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32331a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The function names xfs_finish_reclaim and xfs_finish_reclaim_all are not
very descriptive of what they are reclaiming. Rename to
xfs_reclaim_inode[s] to match the xfs_sync_inodes() function.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32330a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Background inode reclaim is run by the xfssyncd. Move the reclaim worker
functions to be close to the sync code as the are very similar in
structure and are both run from the same background thread.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32329a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
With the combined linux and XFS inode, we need to ensure that the combined
structure is not freed before the generic code is finished with the inode.
As it turns out, there is a case where the XFS inode is freed before the
linux inode - when xfs_reclaim() is called from ->clear_inode() on a clean
inode, the xfs inode is freed during that call. The generic code
references the inode after the ->clear_inode() call, so this is a use
after free situation.
Fix the problem by moving the xfs_reclaim() call to ->destroy_inode()
instead of in ->clear_inode(). This ensures the combined inode structure
is not freed until after the generic code has finished with it.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32324a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.
Version 3 o kill xfs_icount()
Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32323a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Once the Linux inode and the XFS inode are combined, we cannot rely on
just check if the linux inode exists as a method of determining if it is
valid or not. Hence we should always call xfs_mark_inode_dirty_sync()
instead as it does the correct checks to determine if the liinux inode is
in a valid state or not.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32318a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
There are really two cases in xfs_iget_core(). The first is the cache hit
case, the second is the miss case. They share very little code, and hence
can easily be factored out into separate functions. This makes the code
much easier to understand and subsequently modify.
SGI-PV: 988141
SGI-Modid: xfs-linux-melb:xfs-kern:32317a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
We can only read inode->i_count if the inode is actually there and not a
NULL pointer. This was introduced in one of the recent sync patches.
SGI-PV: 988255
SGI-Modid: xfs-linux-melb:xfs-kern:32315a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With all the other filesystem sync code it in xfs_sync.c including the
data quiesce code, it makes sense to move the remaining quiesce code to
the same place.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32312a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
There are no more callers to xfs_sync() now, so remove the function
altogther.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32311a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
SYNC_CLOSE is only ever used and checked in conjunction with SYNC_WAIT,
and this only done in one spot. The only thing this does is make
XFS_bflush() calls to the data buftargs.
This will happen very shortly afterwards the xfs_sync() call anyway in the
unmount path via the xfs_close_devices(), so this code is redundant and
can be removed. That only user of SYNC_CLOSE is now gone, so kill the flag
completely.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32310a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Continue to de-multiplex xfs_sync be replacing all SYNC_DELWRI callers
with direct calls functions that do the work. Isolate the data quiesce
case to a function in xfs_sync.c. Isolate the FSDATA case with explicit
calls to xfs_sync_fsdata().
Version 2: o Push delwri related log forces into xfs_sync_inodes().
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32309a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Continue to de-multiplex xfs_sync be replacing all SYNC_ATTR callers with
direct calls xfs_sync_inodes(). Add an assert into xfs_sync() to ensure we
caught all the SYNC_ATTR callers.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32308a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Start de-multiplexing xfs_sync() by making xfs_sync_worker() call the
specific sync functions it needs. This is only a small, unique subset of
the entire xfs_sync() code so is easier to follow.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32307a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now that the only caller is xfs_sync(), merge the two together as it makes
no sense to keep them separate.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32306a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of
xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with
direct calls to xfs_sync_inodes() as that is all that is being done with
the specific flags being passed in.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32305a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
With the sync code relocated to the linux-2.6 directory we can use struct
inodes directly. If we do the same thing for the quota release code, we
can remove vn_grab altogether. While here, convert the VN_BAD() checks to
is_bad_inode() so we can remove vnodes entirely from this code.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32304a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Split out two helpers from xfs_syncsub for the dummy log commit and the
superblock writeout.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32303a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move the XFS_BMAP_SANITY_CHECK macro out of line and make it a properly
typed function. Also pass the xfs_buf for the btree block instead of just
the btree block header, as we will need some additional information for it
to implement CRC checking of btree blocks.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32301a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
structures.
Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32300a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the generic record / key / ptr addressing macros that use cpp
token pasting with simpler macros that do the job for just one given btree
type. The new macros lose the cur argument and thus can be used outside
the core btree code, but also gain an xfs_mount * argument to allow for
checking the CRC flag in the near future. Note that many of these macros
aren't actually used in the kernel code, but only in userspace (mostly in
xfs_repair).
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32295a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now we've removed all users of the mount inode list, we can kill it. This
reduces the size of the xfs_inode by 2 pointers.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32293a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.
Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32292a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Make releasing all inode dquots traverse the per-ag inode radix trees
rather than the mount inode list. This removes another user of the mount
inode list.
Version 3 o fix comment relating to avoiding trying to release the
quota inodes and those in reclaim.
Version 2 o add comment explaining use of gang lookups for a single inode
o use IRELE, not VN_RELE o move check for ag initialisation to caller.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32291a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Update xfs_sync_inodes to walk the inode radix tree cache to find dirty
inodes. This removes a huge bunch of nasty, messy code for traversing the
mount inode list safely and removes another user of the mount inode list.
Version 3 o rediff against new linux-2.6/xfs_sync.c code
Version 2 o add comment explaining use of gang lookups for a single inode
o use IRELE, not VN_RELE o move check for ag initialisation to caller.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32290a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Normally dquots are written back via delayed write mechanisms. They are
flushed to their backing buffer by xfssyncd, which is then pushed out by
either AIL or xfsbufd flushing. The flush from the xfssyncd is supposed to
be non-blocking, but xfs_qm_dqflush() always waits for pinned duots, which
means that it will block for the length of time it takes to do a
synchronous log force. This causes unnecessary extra log I/O to be issued
whenever we try to flush a busy dquot.
Avoid the log forces and blocking xfssyncd by making xfs_qm_dqflush() pay
attention to what type of sync it is doing when it sees a pinned dquot and
not waiting when doing non-blocking flushes.
SGI-PV: 988147
SGI-Modid: xfs-linux-melb:xfs-kern:32287a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_iflush_all() walks the m_inodes list to find inodes that need
reclaiming. We already have such a list - the m_del_inodes list. Replace
xfs_iflush_all() with a call to xfs_finish_reclaim_all() and clean up
xfs_finish_reclaim_all() to handle the different flush modes now needed.
Originally based on a patch from Christoph Hellwig.
Version 3 o rediff against new linux-2.6/xfs_sync.c code
Version 2 o revert xfs_syncsub() inode reclaim behaviour back to original
code o xfs_quiesce_fs() should use XFS_IFLUSH_DELWRI_ELSE_ASYNC, not
XFS_IFLUSH_ASYNC, to prevent change of behaviour.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32284a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Move all the xfssyncd code to the new xfs_sync.c file. This places it
closer to the actual code that it interacts with, rather than just being
associated with high level VFS code.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32283a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
The sync code in XFS is spread around several files. While it used to make
sense to have such a distribution, the code is about to be cleaned up and
so centralising it in one spot as the first step makes sense.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32282a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
This is a fix for patch " Clean up dquot pincount code" which introduced a
build breakage due to a missing & in xfs_qm_dquot_logitem_pin.
SGI-PV: 986789
SGI-Modid: xfs-linux-melb:xfs-kern:32221a
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This is a code cleanup and optimization that removes a per mount point
spinlock from the quota code and cleans up the code.
The patch changes the pincount from being an int protected by a spinlock
to an atomic_t allowing the pincount to be manipulated without holding the
spinlock.
This cleanup also protects against random wakup's of both the aild and
xfssyncd by reevaluating the pincount after been woken. Two latter patches
will address the Spurious wakeups.
SGI-PV: 986789
SGI-Modid: xfs-linux-melb:xfs-kern:32215a
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's possible to have outstanding xfs_ioend_t's queued when the file size
is zero. This can happen in the direct I/O path when a direct I/O write
fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie
xfs_end_io_direct() does not know that the I/O failed so can't force the
xfs_ioend_t to be flushed synchronously).
When we truncate a file on unlink we don't know to wait for these
xfs_ioend_ts and we can have a use-after-free situation if the inode is
reclaimed before the xfs_ioend_t is finally processed.
As was suggested by Dave Chinner lets wait for all I/Os to complete when
truncating the file size to zero.
SGI-PV: 981668
SGI-Modid: xfs-linux-melb:xfs-kern:32216a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Make the existing bmap btree tracing generic so that it applies to all
btree types.
Some fragments lifted from a patch by Dave Chinner.
This adds two files that were missed from the previous btree tracing
checkin.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32210a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Lots of functionality in xfs_btree.c isn't needed by callers outside of
this file anymore, so mark these functions static.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32209a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add methods to check whether two keys/records are in the righ order. This
replaces the xfs_btree_check_key and xfs_btree_check_rec methods. For the
callers from xfs_bmap.c just opencode the bmbt-specific asserts.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32208a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
These are equivalent to the xfs_btree_* versions, and the only remaining
caller can be switched to the generic one after they are exported. Also
remove some now dead infrastructure in xfs_bmap_btree.c.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32207a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Not really much reason to make it generic given that it's so small, but
this is the last non-method in xfs_alloc_btree.c and xfs_ialloc_btree.c,
so it makes the whole btree implementation more structured.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32206a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree delete code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32205a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_killroot is a mostly generic implementation of moving from a real
block based root to an inode based root. So move it to xfs_btree.c where
it can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_kill_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case. I've also added a comment describing what it does and why
it's named the way it is.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32203a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree insert code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32202a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_newroot is a mostly generic implementation of moving from an
inode root to a real block based root. So move it to xfs_btree.c where it
can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_new_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32201a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Add a xfs_btree_new_root helper for the alloc and ialloc btrees. The bmap
btree needs it's own version and is not converted.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32200a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree split code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32198a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree left shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32197a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree right shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
The most complicated part here is the lastrec tracking for the alloc
btree. Most logic is in the update_lastrec method which has to do some
hopefully good enough dirty magic to maintain it.
[hch: split out from bigger patch and a rework of the lastrec
logic]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Note that there are many > 80 char lines introduced due to the
xfs_btree_key casts. But the places where this happens is throw-away code
once the whole btree code gets merged into a common implementation.
The same is true for the temporary xfs_alloc_log_keys define to the new
name. All old users will be gone after a few patches.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32191a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Because this is the first major generic btree routine this patch includes
some infrastrucure, first a few routines to deal with a btree block that
can be either in short or long form, second xfs_btree_read_buf_block,
which is the new central routine to read a btree block given a cursor, and
third the new xfs_btree_ptr_addr routine to calculate the address for a
given btree pointer record.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32190a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add new helpers in xfs_btree.c to find the record, key and block pointer
entries inside a btree block. To implement this genericly the
->get_maxrecs methods and two new xfs_btree_ops entries for the key and
record sizes are used. Also add a big comment describing how the
addressing inside a btree block works.
Note that these helpers are unused until users are introduced in the next
patches and this patch will thus cause some harmless compiler warnings.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32189a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Factor xfs_btree_maxrecs into a per-btree operation.
The get_maxrecs method is based on a patch from Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32188a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the existing bmap btree tracing generic so that it applies to all
btree types.
Some fragments lifted from a patch by Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Introduce statistics coverage of all the btrees and cover all the btree
operations, not just some.
Invaluable for determining test code coverage of all the btree
operations....
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32184a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Move the various btree validation helpers around in xfs_btree.c so that
they are close to each other and in common #ifdef DEBUG sections.
Also add a new xfs_btree_check_ptr helper to check a btree ptr that can be
either long or short form.
Split out from a bigger patch from Dave Chinner with various small changes
applied by me.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32183a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Refactor xfs_btree_readahead to make it more readable:
(a) remove the inline xfs_btree_readahead wrapper and move all checks out
of line into the main routine.
(b) factor out helpers for short/long form btrees
(c) move check for root in inodes from the callers into
xfs_btree_readahead
[hch: split out from a big patch and minor cleanups]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32182a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add a flag to the xfs btree cursor when using long (64bit) block pointers
instead of checking btnum == XFS_BTNUM_BMAP.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32181a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
The bmap btree is rooted in the inode and not in a disk block. Make the
support for this feature more generic by adding a btree flag to for this
feature instead of relying on the XFS_BTNUM_BMAP btnum check.
Also clean up xfs_btree_get_block where this new flag is used.
Based upon a patch from Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32180a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add generic union types for btree pointers, keys and records. The generic
btree pointer contains either a 32 and 64bit big endian scalar for short
and long form btrees, and the key and record contain the relevant type for
each possible btree.
Split out from a bigger patch from Dave Chinner and simplified a little
further.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32178a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.
Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.
The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32176a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
This type is only embedded in struct xfs_btree_block and never used
directly. By moving the fields directly into struct xfs_btree_block a lot
of the macros for struct xfs_btree_sblock and struct xfs_btree_lblock can
be used for struct xfs_btree_block too now which helps greatly with some
of the migrations during implementing the generic btree code.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32174a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Lock debugging reported the ilock was being destroyed without being
unlocked. We don't need to lock the inode until we are going to insert it
into the radix tree.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32159a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Destroying the quota stuff on unmount can access the log - ie
XFS_QM_DONE() ends up in xfs_dqunlock() which calls
xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the
log has already been destroyed. Just move the cleanup of the quota code
earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving
XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot.
SGI-PV: 987086
SGI-Modid: xfs-linux-melb:xfs-kern:32148a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
[PATCH] kill the rest of struct file propagation in block ioctls
[PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
[PATCH] get rid of blkdev_locked_ioctl()
[PATCH] get rid of blkdev_driver_ioctl()
[PATCH] sanitize blkdev_get() and friends
[PATCH] remember mode of reiserfs journal
[PATCH] propagate mode through swsusp_close()
[PATCH] propagate mode through open_bdev_excl/close_bdev_excl
[PATCH] pass fmode_t to blkdev_put()
[PATCH] kill the unused bsize on the send side of /dev/loop
[PATCH] trim file propagation in block/compat_ioctl.c
[PATCH] end of methods switch: remove the old ones
[PATCH] switch sr
[PATCH] switch sd
[PATCH] switch ide-scsi
[PATCH] switch tape_block
[PATCH] switch dcssblk
[PATCH] switch dasd
[PATCH] switch mtd_blkdevs
[PATCH] switch mmc
...
Now that we've moved the readdir hack to the nfsd code, we can
remove the local version from the XFS code.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
replace open_bdev_excl/close_bdev_excl with variants taking fmode_t.
superblock gets the value used to mount it stored in sb->s_mode
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we skip unrecognized options in xfs_fs_remount we should just break
out of the switch and not return because otherwise we may skip clearing
the xfs-internal read-only flag. This will only show up on some
operations like touch because most read-only checks are done by the VFS
which thinks this filesystem is r/w. Eventually we should replace the
XFS read-only flag with a helper that always checks the VFS flag to make
sure they can never get out of sync.
Bug reported and fix verified by Marcel Beister on #xfs.
Bug fix verified by updated xfstests/189.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Timothy Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared. But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound. Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.
This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.
Thanks to Toei Rei for reporting the bug.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yet another bug was found in xfs_iext_irec_compact_full() and while the
source of the bug was found it wasn't an easy task to track it down
because the conditions are very difficult to reproduce.
A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their
significant effort in tracking down the source of this corruption.
xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost
identical - they both compact indirect extent lists by moving extents from
subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only
moves extents if all of the extents in the next buffer will fit into the
empty space in the buffer before it. xfs_iext_irec_compact_full() will go
a step further and move part of the next buffer if all the extents wont
fit. It will then shift the remaining extents in the next buffer up to the
start of the buffer. The bug here was that we did not update er_extoff and
this caused extent list corruption.
It does not appear that this extra functionality gains us much. Calling
xfs_iext_irec_compact_pages() instead will do a good enough job at
compacting the indirect list and will be quicker too.
For the case in xfs_iext_indirect_to_direct() the total number of extents
in the indirect list will fit into one buffer so we will never need the
extra functionality of xfs_iext_irec_compact_full() there.
Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the
buffers will never overlap) so we don't want the performance hit that can
incur.
SGI-PV: 987159
SGI-Modid: xfs-linux-melb:xfs-kern:32166a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
If we don't move all the records from the next buffer into the current
buffer then we need to update the er_extoff field of the next buffer as we
shift the remaining records to the start of the buffer.
SGI-PV: 987159
SGI-Modid: xfs-linux-melb:xfs-kern:32165a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Russell Cattelan <cattelan@thebarn.com>
When unreserving space with boundaries that are not block aligned we round
up the start and round down the end boundaries and then use this function,
xfs_zero_remaining_bytes(), to zero the parts of the blocks that got
dropped during the rounding. The problem is we don't consider if these
blocks are beyond eof. Worse still is if we encounter delayed allocations
beyond eof we will try to use the magic delayed allocation block number as
a real block number. If the file size is ever extended to expose these
blocks then we'll go through xfs_zero_eof() to zero them anyway.
SGI-PV: 983683
SGI-Modid: xfs-linux-melb:xfs-kern:32055a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
We have a use-after-free issue where log completions access buffers via
the buffer log item and the buffer has already been freed. Fix this by
taking a reference on the buffer when attaching the buffer log item and
release the hold when the buffer log item is detached and we no longer
need the buffer. Also create a new function xfs_buf_item_free() to combine
some common code.
SGI-PV: 985757
SGI-Modid: xfs-linux-melb:xfs-kern:32025a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
If we call xfs_lock_two_inodes() to grab both the iolock and the ilock,
then drop the ilocks on both inodes, then grab them again (as
xfs_swap_extents() does) then lockdep will report a locking order problem.
This is a false positive.
To avoid this, disallow xfs_lock_two_inodes() fom locking both inode locks
at once - force calers to make two separate calls. This means that nested
dropping and regaining of the ilocks will retain the same lockdep subclass
and so lockdep will not see anything wrong with this code.
SGI-PV: 986238
SGI-Modid: xfs-linux-melb:xfs-kern:31999a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The current code in xlog_iodone() uses the wrong macro to check if the
barrier has been cleared due to an EOPNOTSUPP error form the lower layer.
SGI-PV: 986143
SGI-Modid: xfs-linux-melb:xfs-kern:31984a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net>
Signed-off-by: Peter Leckie <pleckie@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With the help from some tracing I found that we try to map extents beyond
eof when doing a direct I/O read. It appears that the way to inform the
generic direct I/O path (ie do_direct_IO()) that we have breached eof is
to return an unmapped buffer from xfs_get_blocks_direct(). This will cause
do_direct_IO() to jump to the hole handling code where is will check for
eof and then abort.
This problem was found because a direct I/O read was trying to map beyond
eof and was encountering delayed allocations. The delayed allocations
beyond eof are speculative allocations and they didn't get converted when
the direct I/O flushed the file because there was only enough space in the
current AG to convert and write out the dirty pages within eof. Note that
xfs_iomap_write_allocate() wont necessarily convert all the delayed
allocation passed to it - it will return after allocating the first extent
- so if the delayed allocation extends beyond eof then it will stay that
way.
SGI-PV: 983683
SGI-Modid: xfs-linux-melb:xfs-kern:31929a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Logically we would return an error in xfs_fs_remount code to prevent users
from believing they might have changed mount options using remount which
can't be changed.
But unfortunately mount(8) adds all options from mtab and fstab to the
mount arguments in some cases so we can't blindly reject options, but have
to check for each specified option if it actually differs from the
currently set option and only reject it if that's the case.
Until that is implemented we return success for every remount request, and
silently ignore all options that we can't actually change.
SGI-PV: 985710
SGI-Modid: xfs-linux-melb:xfs-kern:31908a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Memory allocations for log->l_grant_trace and iclog->ic_trace are done on
demand when the first event is logged. In xlog_state_get_iclog_space() we
call xlog_trace_iclog() under a spinlock and allocating memory here can
cause us to sleep with a spinlock held and deadlock the system.
For the log grant tracing we use KM_NOSLEEP but that means we can lose
trace entries. Since there is no locking to serialize the log grant
tracing we could race and have multiple allocations and leak memory.
So move the allocations to where we initialize the log/iclog structures.
Use KM_NOFS to avoid recursing into the filesystem and drop log->l_trace
since it's not even used.
SGI-PV: 983738
SGI-Modid: xfs-linux-melb:xfs-kern:31896a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
As pointed out during review d_add_ci argument order should match d_add,
so switch the dentry and inode arguments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch lets the files using linux/version.h match the files that
#include it.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patches that are intended to introduce copy-on-write credentials for 2.6.28
require abstraction of access to some fields of the task structure,
particularly for the case of one task accessing another's credentials where RCU
will have to be observed.
Introduced here are trivial no-op versions of the desired accessors for current
and other tasks so that other subsystems can start to be converted over more
easily.
Wrappers are introduced into a new header (linux/cred.h) for UID/GID,
EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed
user_struct. These wrappers are macros because the ordering between header
files mitigates against making them inline functions.
linux/cred.h is #included from linux/sched.h.
Further, XFS is modified such that it no longer defines and uses parameterised
versions of current_fs[ug]id(), thus getting rid of the namespace collision
otherwise incurred.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
The ticket allocation code got reworked in 2.6.26 and we now free tickets
whereas before we used to cache them so the use-after-free went
undetected.
SGI-PV: 985525
SGI-Modid: xfs-linux-melb:xfs-kern:31877a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_NOFS to prevent recursion back into the filesystem which can cause
deadlocks.
In the case of xfs_iread() we hold the lock on the inode cluster buffer
while allocating memory for the trace buffers. If we recurse back into XFS
to flush data that may require a transaction to allocate extents which
needs log space. This can deadlock with the xfsaild thread which can't
push the tail of the log because it is trying to get the inode cluster
buffer lock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31838a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Use KM_MAYFAIL for the m_perag allocation, we can deal with the error
easily and blocking forever during mount is not a good idea either.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31837a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_mount_free mostly frees the perag data, which is something that is
duplicated in the mount error path.
Move the XFS_QM_DONE call to the caller and remove the useless
mutex_destroy/spinlock_destroy calls so that we can re-use it for the
mount error path. Also rename it to xfs_free_perag to reflect what it
does.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31836a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_unmounts can't and shouldn't return errors so declare it as returning
void.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31833a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove all the useless flags and code keyed off it in xfs_mountfs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_ichtime updates the xfs_inode and Linux inode timestamps just fine, no
need to call file_update_time and then copy the values over to the XFS
inode. The only additional thing in file_update_time are checks not
applicable to the write path.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31829a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Port a little optmization from file_update_time to xfs_ichgtime, and only
update the timestamp and mark the inode dirty if the timestamp actually
changes in the timer tick resultion supported by the running kernel.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31827a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In xfs_ialloc we just want to set all timestamps to the current time. We
don't need to mark the inode dirty like xfs_ichgtime does, and we don't
need nor want the opimizations in xfs_ichgtime that I will introduce in
the next patch.
So just opencode the timestamp update in xfs_ialloc, and remove the new
unused XFS_ICHGTIME_ACC case in xfs_ichgtime.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31825a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all users of the sema_t are gone from XFS we can finally kill it.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31823a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the dquot flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31822a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Use the new completion flush code to implement the inode flush lock.
Removes one of the final users of semaphores in the XFS code base.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31817a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The xfs_buf_t b_iodonesema is really just a semaphore that wants to be a
completion. Change it to a completion and remove the last user of the
sema_t from XFS.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31815a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
