frv, sh64, ia64 and sparc64 do not have do_settimeofday() exported (the
last two are using variant in kernel/time.c). Exports added to match
the rest of architectures.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
exit_signal() (called from copy_process's error path) should decrement
->signal->live, otherwise forking process will miss 'group_dead' in
do_exit().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This just makes sure that a thread's expiry times can't get reset after
it clears them in do_exit.
This is what allowed us to re-introduce the stricter BUG_ON() check in
a362f463a6.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reverts commit 3de463c7d9.
Roland has another patch that allows us to leave the BUG_ON() in place
by just making sure that the condition it tests for really is always
true.
That goes in next.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's a silly off-by-one error in the code that updates the expiration
of posix CPU timers, causing them to not be properly updated when they
hit exactly on their expiration time (which should be the normal case).
This causes them to then fire immediately again, and only _then_ get
properly updated.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With CONFIG_SMP=n:
*** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined!
due to set_cpus_allowed().
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This might be harmless, but looks like a race from code inspection (I
was unable to trigger it). I must admit, I don't understand why we
can't return TIMER_RETRY after 'spin_unlock(&p->sighand->siglock)'
without doing bump_cpu_timer(), but this is what original code does.
posix_cpu_timer_set:
read_lock(&tasklist_lock);
spin_lock(&p->sighand->siglock);
list_del_init(&timer->it.cpu.entry);
spin_unlock(&p->sighand->siglock);
We are probaly deleting the timer from run_posix_cpu_timers's 'firing'
local list_head while run_posix_cpu_timers() does list_for_each_safe.
Various bad things can happen, for example we can just delete this timer
so that list_for_each() will not notice it and run_posix_cpu_timers()
will not reset '->firing' flag. In that case,
....
if (timer->it.cpu.firing) {
read_unlock(&tasklist_lock);
timer->it.cpu.firing = -1;
return TIMER_RETRY;
}
sys_timer_settime() goes to 'retry:', calls posix_cpu_timer_set() again,
it returns TIMER_RETRY ...
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_exit() clears ->it_##clock##_expires, but nothing prevents
another cpu to attach the timer to exiting process after that.
After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and
before do_exit() calls 'schedule() local timer interrupt can find
tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu
does sys_wait4) interrupted task has ->signal == NULL.
At this moment exiting task has no pending cpu timers, they were cleaned
up in __exit_signal()->posix_cpu_timers_exit{,_group}(), so we can just
return from irq.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1. cleanup_timers() sets timer->task = NULL under tasklist + ->sighand locks.
That means that this code in posix_cpu_timer_del() and posix_cpu_timer_set()
lock_timer(timer);
if (timer->task == NULL)
return;
read_lock(tasklist);
put_task_struct(timer->task)
is racy. With this patch timer->task modified and accounted only under
timer->it_lock. Sadly, this means that dead task_struct won't be freed
until timer deleted or armed.
2. run_posix_cpu_timers() collects expired timers into local list under
tasklist + ->sighand again. That means that posix_cpu_timer_del()
should check timer->it.cpu.firing under these locks too.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Bursty timers aren't good for anybody, very much including latency for
other programs when we trigger lots of timers in interrupt context. So
set a random limit, after which we'll handle the rest on the next timer
tick.
Noted by Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When I originally moved exit_itimers into __exit_signal, that was the only
place where we could reliably know it was the last thread in the group
dying, without races. Since then we've gotten the signal_struct.live
counter, and do_exit can reliably do group-wide cleanup work.
This patch moves the call to do_exit, where it's made without locks. This
avoids the deadlock issues that the old __exit_signal code's comment talks
about, and the one that Oleg found recently with process CPU timers.
[ This replaces e03d13e985, which is why
it was just reverted. ]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The PF_NOFREEZE process flag should not be inherited when a thread is
forked. This patch (as585) removes the flag from the child.
This problem is starting to show up more and more as drivers turn to the
kthread API instead of using kernel_thread(). As a result, their kernel
threads are now children of the kthread worker instead of modprobe, and
they inherit the PF_NOFREEZE flag. This can cause problems during system
suspend; the kernel threads are not getting frozen as they ought to be.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Nesterov reported an SMP deadlock. If there is a running timer
tracking a different process's CPU time clock when the process owning
the timer exits, we deadlock on tasklist_lock in posix_cpu_timer_del via
exit_itimers.
That code was using tasklist_lock to check for a race with __exit_signal
being called on the timer-target task and clearing its ->signal.
However, there is actually no such race. __exit_signal will have called
posix_cpu_timers_exit and posix_cpu_timers_exit_group before it does
that. Those will clear those k_itimer's association with the dying
task, so posix_cpu_timer_del will return early and never reach the code
in question.
In addition, posix_cpu_timer_del called from exit_itimers during execve
or directly from timer_delete in the process owning the timer can race
with an exiting timer-target task to cause a double put on timer-target
task struct. Make sure we always access cpu_timers lists with sighand
lock held.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This makes call_rcu() keep track of how many events there are on the RCU
list, and cause a reschedule event when the list gets too long.
This helps keep RCU event lists down.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make sure we release the task struct properly when releasing pending
timers.
release_task() does write_lock_irq(&tasklist_lock), so it can't race
with run_posix_cpu_timers() on any cpu.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dipankar made RCU limit the batch size to improve latency, but that
approach is unworkable: it can cause the RCU queues to grow without
bounds, since the batch limiter ended up limiting the callbacks.
So make the limit much higher, and start planning on instead limiting
the batch size by doing RCU callbacks more often if the queue looks like
it might be growing too long.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adds the missing EXPORT_SYMBOL_GPL for getnstimeofday() when
CONFIG_TIME_INTERPOLATION isn't set. Needed by drivers/char/mmtimer.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If a process issues an URB from userspace and (starts to) terminate
before the URB comes back, we run into the issue described above. This
is because the urb saves a pointer to "current" when it is posted to the
device, but there's no guarantee that this pointer is still valid
afterwards.
In fact, there are three separate issues:
1) the pointer to "current" can become invalid, since the task could be
completely gone when the URB completion comes back from the device.
2) Even if the saved task pointer is still pointing to a valid task_struct,
task_struct->sighand could have gone meanwhile.
3) Even if the process is perfectly fine, permissions may have changed,
and we can no longer send it a signal.
So what we do instead, is to save the PID and uid's of the process, and
introduce a new kill_proc_info_as_uid() function.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ Fixed up types and added symbol exports ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch makes swsusp avoid the possible temporary corruption
of page translation tables during resume on x86-64. This is achieved by
creating a copy of the relevant page tables that will not be modified by
swsusp and can be safely used by it on resume.
The problem is that during resume on x86-64 swsusp may temporarily
corrupt the page tables used for the direct mapping of RAM. If that
happens, a page fault occurs and cannot be handled properly, which leads
to the solid hang of the affected system. This leads to the loss of the
system's state from before suspend and may result in the loss of data or
the corruption of filesystems, so it is a serious issue. Also, it
appears to happen quite often (for me, as often as 50% of the time).
The problem is related to the fact that (at least) one of the PMD
entries used in the direct memory mapping (starting at PAGE_OFFSET)
points to a page table the physical address of which is much greater
than the physical address of the PMD entry itself. Moreover,
unfortunately, the physical address of the page table before suspend
(i.e. the one stored in the suspend image) happens to be different to
the physical address of the corresponding page table used during resume
(i.e. the one that is valid right before swsusp_arch_resume() in
arch/x86_64/kernel/suspend_asm.S is executed). Thus while the image is
restored, the "offending" PMD entry gets overwritten, so it does not
point to the right physical address any more (i.e. there's no page
table at the address pointed to by it, because it points to the address
the page table has been at during suspend). Consequently, if the PMD
entry is used later on, and it _is_ used in the process of copying the
image pages, a page fault occurs, but it cannot be handled in the normal
way and the system hangs.
In principle we can call create_resume_mapping() from
swsusp_arch_resume() (ie. from suspend_asm.S), but then the memory
allocations in create_resume_mapping(), resume_pud_mapping(), and
resume_pmd_mapping() must be made carefully so that we use _only_
NosaveFree pages in them (the other pages are overwritten by the loop in
swsusp_arch_resume()). Additionally, we are in atomic context at that
time, so we cannot use GFP_KERNEL. Moreover, if one of the allocations
fails, we should free all of the allocated pages, so we need to trace
them somehow.
All of this is done in the appended patch, except that the functions
populating the page tables are located in arch/x86_64/kernel/suspend.c
rather than in init.c. It may be done in a more elegan way in the
future, with the help of some swsusp patches that are in the works now.
[AK: move some externs into headers, renamed a function]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- added typedef unsigned int __nocast gfp_t;
- replaced __nocast uses for gfp flags with gfp_t - it gives exactly
the same warnings as far as sparse is concerned, doesn't change
generated code (from gcc point of view we replaced unsigned int with
typedef) and documents what's going on far better.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Let's suppose we have 2 threads in thread group:
A - does coredump
B - has pending SIGSTOP
thread A thread B
do_coredump: get_signal_to_deliver:
lock(->sighand)
->signal->flags = SIGNAL_GROUP_EXIT
unlock(->sighand)
lock(->sighand)
signr = dequeue_signal()
->signal->flags |= SIGNAL_STOP_DEQUEUED
return SIGSTOP;
do_signal_stop:
unlock(->sighand)
coredump_wait:
zap_threads:
lock(tasklist_lock)
send SIGKILL to B
// signal_wake_up() does nothing
unlock(tasklist_lock)
lock(tasklist_lock)
lock(->sighand)
re-check sig->flags & SIGNAL_STOP_DEQUEUED, yes
set_current_state(TASK_STOPPED);
finish_stop:
schedule();
// ->state == TASK_STOPPED
wait_for_completion(&startup_done)
// waits for complete() from B,
// ->state == TASK_UNINTERRUPTIBLE
We can't wake up 'B' in any way:
SIGCONT will be ignored because handle_stop_signal() sees
->signal->flags & SIGNAL_GROUP_EXIT.
sys_kill(SIGKILL)->__group_complete_signal() will choose
uninterruptible 'A', so it can't help.
sys_tkill(B, SIGKILL) will be ignored by specific_send_sig_info()
because B already has pending SIGKILL.
This scenario is not possbile if 'A' does do_group_exit(), because
it sets sig->flags = SIGNAL_GROUP_EXIT and delivers SIGKILL to
subthreads atomically, holding both tasklist_lock and sighand->lock.
That means that do_signal_stop() will notice !SIGNAL_STOP_DEQUEUED
after re-locking ->sighand. And it is not possible to any other
thread to re-add SIGNAL_STOP_DEQUEUED later, because dequeue_signal()
can only return SIGKILL.
I think it is better to change do_coredump() to do sigaddset(SIGKILL)
and signal_wake_up() under sighand->lock, but this patch is much
simpler.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We should always use bitmask ops, rather than depend on some ordering of
the different states. With the TASK_NONINTERACTIVE flag, the inequality
doesn't really work.
Oleg Nesterov argues (likely correctly) that this test is unnecessary in
the first place. However, the minimal fix for now is to at least make
it work in the presense of TASK_NONINTERACTIVE. Waiting for consensus
from Roland & co on potential bigger cleanups.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Switched cpuset_common_file_read() to simple_read_from_buffer(), killed
a bunch of useless (and not quite correct - e.g. min(size_t,ssize_t))
code.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Any tests using < TASK_STOPPED or the like are left over from the time
when the TASK_ZOMBIE and TASK_DEAD bits were in the same word, and it
served to check for "stopped or dead". I think this one in
do_signal_stop is the only such case. It has been buggy ever since
exit_state was separated, and isn't testing the exit_state value.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't leak a page of memory if user reads a cpuset file past eof.
Signed-off-by: KUROSAWA Takahiro <kurosawa@valinux.co.jp>
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch makes swsusp avoid problems during resume if there are
too many pages to save on suspend. It adds a constant that allows us to
verify if we are going to save too many pages and implements the check
(this is done as early as we can tell that the check will trigger, which is
in swsusp_alloc()).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dave Jones says:
... if the modprobe.conf has trailing whitespace, modules fail to load
with the following helpful message..
snd_intel8x0: Unknown parameter `'
Previous version truncated last argument.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Prevent swsusp from leaking some memory in case of an error in
read_pagedir(). It also prevents the BUG_ON() from triggering if there's
an error while reading swap.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch removes some wrong code from the data_free() function
in swsusp.
This function could only be called if there's an error while writing the
suspend image to swap, so it is not triggered easily. However, if
triggered, it would probably corrupt some memory.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Some IRQ controllers don't need an ack function (e.g. OpenPIC on
PPC platforms) and for them we'd rather not have the overhead
of doing an indirect call to a function that does nothing.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Bhavesh P. Davda <bhavesh@avaya.com> noticed that SIGKILL wouldn't
properly kill a process under just the right cicumstances: a stopped
task that already had another signal queued would get the SIGKILL
queued onto the shared queue, and there it would remain until SIGCONT.
This simplifies the signal acceptance logic, and fixes the bug in the
process.
Losely based on an earlier patch by Bhavesh.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The following patch makes swsusp avoid triggering the BUG_ON() in
swsusp_suspend() if there is not enough memory for suspend.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent. Despite checking and double
checking my work it appears I missed an obvious one.
The S4 suspend code for PM_DISK_PLATFORM was also calling device_shutdown
without setting system_state, and was not calling the appropriate
reboot_notifier.
This patch fixes the bug by replacing the call of device_suspend with
kernel_poweroff_prepare.
Various forms of this failure have been fixed and tracked for a while.
Thanks for tracking this down go to: Alexey Starikovskiy, Meelis Roos
<mroos@linux.ee>, Nigel Cunningham <ncunningham@cyclades.com>, Pierre
Ossman <drzeus-list@drzeus.cx>
History of this bug is at:
http://bugme.osdl.org/show_bug.cgi?id=4320
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In the lead up to 2.6.13 I fixed a large number of reboot problems by
making the calling conventions consistent. Despite checking and double
checking my work it appears I missed an obvious one.
This first patch simply refactors the reboot routines so all of the
preparation for various kinds of reboots are in their own functions.
Making it very hard to get the various kinds of reboot out of sync.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ia64's sched_clock() accesses per-cpu data which isn't set up at boot time.
Hence ia64 cannot use printk timestamping, because printk() will crash in
sched_clock().
So make printk() use printk_clock(), defaulting to sched_clock(), overrideable
by the architecture via attribute(weak).
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With the new fdtable locking rules, you have to protect fdtable with either
->file_lock or rcu_read_lock/unlock(). There are some places where we
aren't doing either. This patch fixes those places.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one
version of this patch can be found here
http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ).
This patch also made corresponding changes in kernel/sys.c to change the
prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was
modified from 0..1 to 0..2.
However, a corresponding change was not made for PR_GET_DUMPABLE: if the
dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that
the caller can't determine the true setting of this flag.
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a problem wherein a new-born task is added to a dead CPU.
Signed-off-by: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
fix up the runqueue lock owner only if we truly did a context-switch
with the runqueue lock held. Impacts ia64, mips, sparc64 and arm.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use the add_taint() interface for setting tainted bit flags instead of
doing it manually.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These functions don't need schedule_timeout()'s barrier.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Optimize the deadlock avoidance check on the global cpuset
semaphore cpuset_sem. Instead of adding a depth counter to the
task struct of each task, rather just two words are enough, one
to store the depth and the other the current cpuset_sem holder.
Thanks to Nikita Danilov for the idea.
Signed-off-by: Paul Jackson <pj@sgi.com>
[ We may want to change this further, but at least it's now
a totally internal decision to the cpusets code ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
..and only enable them for ia64. The functions are only valid
when the whole system has been totally stopped and no scheduler
activity is ongoing on any CPU, and interrupts are globally
disabled.
In other words, they aren't useful for anything else. So make
sure that nobody can use them by mistake.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Scheduler hooks to see/change which process is deemed to be on a cpu.
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Add schedule_timeout_{,un}interruptible() interfaces so that
schedule_timeout() callers don't have to worry about forgetting to add the
set_current_state() call beforehand.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Don't pull tasks from a group if that would cause the group's total load to
drop below its total cpu_power (ie. cause the group to start going idle).
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jack Steiner brought this issue at my OLS talk.
Take a scenario where two tasks are pinned to two HT threads in a physical
package. Idle packages in the system will keep kicking migration_thread on
the busy package with out any success.
We will run into similar scenarios in the presence of CMP/NUMA.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In sys_sched_yield(), we cache current->array in the "array" variable, thus
there's no need to dereference "current" again later.
Signed-Off-By: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If an idle sibling of an HT queue encounters a busy sibling, then make
higher level load balancing of the non-idle variety.
Performance of multiprocessor HT systems with low numbers of tasks
(generally < number of virtual CPUs) can be significantly worse than the
exact same workloads when running in non-HT mode. The reason is largely
due to poor scheduling behaviour.
This patch improves the situation, making the performance gap far less
significant on one problematic test case (tbench).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During periodic load balancing, don't hold this runqueue's lock while
scanning remote runqueues, which can take a non trivial amount of time
especially on very large systems.
Holding the runqueue lock will only help to stabilise ->nr_running, however
this doesn't do much to help because tasks being woken will simply get held
up on the runqueue lock, so ->nr_running would not provide a really
accurate picture of runqueue load in that case anyway.
What's more, ->nr_running (and possibly the cpu_load averages) of remote
runqueues won't be stable anyway, so load balancing is always an inexact
operation.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Similarly to the earlier change in load_balance, only lock the runqueue in
load_balance_newidle if the busiest queue found has a nr_running > 1. This
will reduce frequency of expensive remote runqueue lock aquisitions in the
schedule() path on some workloads.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
William Weston reported unusually high scheduling latencies on his x86 HT
box, on the -RT kernel. I managed to reproduce it on my HT box and the
latency tracer shows the incident in action:
_------=> CPU#
/ _-----=> irqs-off
| / _----=> need-resched
|| / _---=> hardirq/softirq
||| / _--=> preempt-depth
|||| /
||||| delay
cmd pid ||||| time | caller
\ / ||||| \ | /
du-2803 3Dnh2 0us : __trace_start_sched_wakeup (try_to_wake_up)
..............................................................
... we are running on CPU#3, PID 2778 gets woken to CPU#1: ...
..............................................................
du-2803 3Dnh2 0us : __trace_start_sched_wakeup <<...>-2778> (73 1)
du-2803 3Dnh2 0us : _raw_spin_unlock (try_to_wake_up)
................................................
... still on CPU#3, we send an IPI to CPU#1: ...
................................................
du-2803 3Dnh1 0us : resched_task (try_to_wake_up)
du-2803 3Dnh1 1us : smp_send_reschedule (try_to_wake_up)
du-2803 3Dnh1 1us : send_IPI_mask_bitmask (smp_send_reschedule)
du-2803 3Dnh1 2us : _raw_spin_unlock_irqrestore (try_to_wake_up)
...............................................
... 1 usec later, the IPI arrives on CPU#1: ...
...............................................
<idle>-0 1Dnh. 2us : smp_reschedule_interrupt (c0100c5a 0 0)
So far so good, this is the normal wakeup/preemption mechanism. But here
comes the scheduler anomaly on CPU#1:
<idle>-0 1Dnh. 2us : preempt_schedule_irq (need_resched)
<idle>-0 1Dnh. 2us : preempt_schedule_irq (need_resched)
<idle>-0 1Dnh. 3us : __schedule (preempt_schedule_irq)
<idle>-0 1Dnh. 3us : profile_hit (__schedule)
<idle>-0 1Dnh1 3us : sched_clock (__schedule)
<idle>-0 1Dnh1 4us : _raw_spin_lock_irq (__schedule)
<idle>-0 1Dnh1 4us : _raw_spin_lock_irqsave (__schedule)
<idle>-0 1Dnh2 5us : _raw_spin_unlock (__schedule)
<idle>-0 1Dnh1 5us : preempt_schedule (__schedule)
<idle>-0 1Dnh1 6us : _raw_spin_lock (__schedule)
<idle>-0 1Dnh2 6us : find_next_bit (__schedule)
<idle>-0 1Dnh2 6us : _raw_spin_lock (__schedule)
<idle>-0 1Dnh3 7us : find_next_bit (__schedule)
<idle>-0 1Dnh3 7us : find_next_bit (__schedule)
<idle>-0 1Dnh3 8us : _raw_spin_unlock (__schedule)
<idle>-0 1Dnh2 8us : preempt_schedule (__schedule)
<idle>-0 1Dnh2 8us : find_next_bit (__schedule)
<idle>-0 1Dnh2 9us : trace_stop_sched_switched (__schedule)
<idle>-0 1Dnh2 9us : _raw_spin_lock (trace_stop_sched_switched)
<idle>-0 1Dnh3 10us : trace_stop_sched_switched <<...>-2778> (73 8c)
<idle>-0 1Dnh3 10us : _raw_spin_unlock (trace_stop_sched_switched)
<idle>-0 1Dnh1 10us : _raw_spin_unlock (__schedule)
<idle>-0 1Dnh. 11us : local_irq_enable_noresched (preempt_schedule_irq)
<idle>-0 1Dnh. 11us < (0)
we didnt pick up pid 2778! It only gets scheduled much later:
<...>-2778 1Dnh2 412us : __switch_to (__schedule)
<...>-2778 1Dnh2 413us : __schedule <<idle>-0> (8c 73)
<...>-2778 1Dnh2 413us : _raw_spin_unlock (__schedule)
<...>-2778 1Dnh1 413us : trace_stop_sched_switched (__schedule)
<...>-2778 1Dnh1 414us : _raw_spin_lock (trace_stop_sched_switched)
<...>-2778 1Dnh2 414us : trace_stop_sched_switched <<...>-2778> (73 1)
<...>-2778 1Dnh2 414us : _raw_spin_unlock (trace_stop_sched_switched)
<...>-2778 1Dnh1 415us : trace_stop_sched_switched (__schedule)
the reason for this anomaly is the following code in dependent_sleeper():
/*
* If a user task with lower static priority than the
* running task on the SMT sibling is trying to schedule,
* delay it till there is proportionately less timeslice
* left of the sibling task to prevent a lower priority
* task from using an unfair proportion of the
* physical cpu's resources. -ck
*/
[...]
if (((smt_curr->time_slice * (100 - sd->per_cpu_gain) /
100) > task_timeslice(p)))
ret = 1;
Note that in contrast to the comment above, we dont actually do the check
based on static priority, we do the check based on timeslices. But
timeslices go up and down, and even highprio tasks can randomly have very
low timeslices (just before their next refill) and can thus be judged as
'lowprio' by the above piece of code. This condition is clearly buggy.
The correct test is to check for static_prio _and_ to check for the
preemption priority. Even on different static priority levels, a
higher-prio interactive task should not be delayed due to a
higher-static-prio CPU hog.
There is a symmetric bug in the 'kick SMT sibling' code of this function as
well, which can be solved in a similar way.
The patch below (against the current scheduler queue in -mm) fixes both
bugs. I have build and boot-tested this on x86 SMT, and nice +20 tasks
still get properly throttled - so the dependent-sleeper logic is still in
action.
btw., these bugs pessimised the SMT scheduler because the 'delay wakeup'
property was applied too liberally, so this fix is likely a throughput
improvement as well.
I separated out a smt_slice() function to make the code easier to read.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch implements a task state bit (TASK_NONINTERACTIVE), which can be
used by blocking points to mark the task's wait as "non-interactive". This
does not mean the task will be considered a CPU-hog - the wait will simply
not have an effect on the waiting task's priority - positive or negative
alike. Right now only pipe_wait() will make use of it, because it's a
common source of not-so-interactive waits (kernel compilation jobs, etc.).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add relevant checks into find_idlest_group() and find_idlest_cpu() to make
them return only the groups that have allowed CPUs and allowed CPUs
respectively.
Signed-off-by: M.Baris Demiray <baris@labristeknoloji.com>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The hyperthread aware nice handling currently puts to sleep any non real
time task when a real time task is running on its sibling cpu. This can
lead to prolonged starvation by having the non real time task pegged to the
cpu with load balancing not pulling that task away.
Currently we force lower priority hyperthread tasks to run a percentage of
time difference based on timeslice differences which is meaningless when
comparing real time tasks to SCHED_NORMAL tasks. We can allow non real
time tasks to run with real time tasks on the sibling up to per_cpu_gain%
if we use jiffies as a counter.
Cleanups and micro-optimisations to the relevant code section should make
it more understandable as well.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The cpusets-formalize-intermediate-gfp_kernel-containment patch
has a deadlock problem.
This patch was part of a set of four patches to make more
extensive use of the cpuset 'mem_exclusive' attribute to
manage kernel GFP_KERNEL memory allocations and to constrain
the out-of-memory (oom) killer.
A task that is changing cpusets in particular ways on a system
when it is very short of free memory could double trip over
the global cpuset_sem semaphore (get the lock and then deadlock
trying to get it again).
The second attempt to get cpuset_sem would be in the routine
cpuset_zone_allowed(). This was discovered by code inspection.
I can not reproduce the problem except with an artifically
hacked kernel and a specialized stress test.
In real life you cannot hit this unless you are manipulating
cpusets, and are very unlikely to hit it unless you are rapidly
modifying cpusets on a memory tight system. Even then it would
be a rare occurence.
If you did hit it, the task double tripping over cpuset_sem
would deadlock in the kernel, and any other task also trying
to manipulate cpusets would deadlock there too, on cpuset_sem.
Your batch manager would be wedged solid (if it was cpuset
savvy), but classic Unix shells and utilities would work well
enough to reboot the system.
The unusual condition that led to this bug is that unlike most
semaphores, cpuset_sem _can_ be acquired while in the page
allocation code, when __alloc_pages() calls cpuset_zone_allowed.
So it easy to mistakenly perform the following sequence:
1) task makes system call to alter a cpuset
2) take cpuset_sem
3) try to allocate memory
4) memory allocator, via cpuset_zone_allowed, trys to take cpuset_sem
5) deadlock
The reason that this is not a serious bug for most users
is that almost all calls to allocate memory don't require
taking cpuset_sem. Only some code paths off the beaten
track require taking cpuset_sem -- which is good. Taking
a global semaphore on the main code path for allocating
memory would not scale well.
This patch fixes this deadlock by wrapping the up() and down()
calls on cpuset_sem in kernel/cpuset.c with code that tracks
the nesting depth of the current task on that semaphore, and
only does the real down() if the task doesn't hold the lock
already, and only does the real up() if the nesting depth
(number of unmatched downs) is exactly one.
The previous required use of refresh_mems(), anytime that
the cpuset_sem semaphore was acquired and the code executed
while holding that semaphore might try to allocate memory, is
no longer required. Two refresh_mems() calls were removed
thanks to this. This is a good change, as failing to get
all the necessary refresh_mems() calls placed was a primary
source of bugs in this cpuset code. The only remaining call
to refresh_mems() is made while doing a memory allocation,
if certain task memory placement data needs to be updated
from its cpuset, due to the cpuset having been changed behind
the tasks back.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch (written by me and also containing many suggestions of Arjan van
de Ven) does a major cleanup of the spinlock code. It does the following
things:
- consolidates and enhances the spinlock/rwlock debugging code
- simplifies the asm/spinlock.h files
- encapsulates the raw spinlock type and moves generic spinlock
features (such as ->break_lock) into the generic code.
- cleans up the spinlock code hierarchy to get rid of the spaghetti.
Most notably there's now only a single variant of the debugging code,
located in lib/spinlock_debug.c. (previously we had one SMP debugging
variant per architecture, plus a separate generic one for UP builds)
Also, i've enhanced the rwlock debugging facility, it will now track
write-owners. There is new spinlock-owner/CPU-tracking on SMP builds too.
All locks have lockup detection now, which will work for both soft and hard
spin/rwlock lockups.
The arch-level include files now only contain the minimally necessary
subset of the spinlock code - all the rest that can be generalized now
lives in the generic headers:
include/asm-i386/spinlock_types.h | 16
include/asm-x86_64/spinlock_types.h | 16
I have also split up the various spinlock variants into separate files,
making it easier to see which does what. The new layout is:
SMP | UP
----------------------------|-----------------------------------
asm/spinlock_types_smp.h | linux/spinlock_types_up.h
linux/spinlock_types.h | linux/spinlock_types.h
asm/spinlock_smp.h | linux/spinlock_up.h
linux/spinlock_api_smp.h | linux/spinlock_api_up.h
linux/spinlock.h | linux/spinlock.h
/*
* here's the role of the various spinlock/rwlock related include files:
*
* on SMP builds:
*
* asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the
* initializers
*
* linux/spinlock_types.h:
* defines the generic type and initializers
*
* asm/spinlock.h: contains the __raw_spin_*()/etc. lowlevel
* implementations, mostly inline assembly code
*
* (also included on UP-debug builds:)
*
* linux/spinlock_api_smp.h:
* contains the prototypes for the _spin_*() APIs.
*
* linux/spinlock.h: builds the final spin_*() APIs.
*
* on UP builds:
*
* linux/spinlock_type_up.h:
* contains the generic, simplified UP spinlock type.
* (which is an empty structure on non-debug builds)
*
* linux/spinlock_types.h:
* defines the generic type and initializers
*
* linux/spinlock_up.h:
* contains the __raw_spin_*()/etc. version of UP
* builds. (which are NOPs on non-debug, non-preempt
* builds)
*
* (included on UP-non-debug builds:)
*
* linux/spinlock_api_up.h:
* builds the _spin_*() APIs.
*
* linux/spinlock.h: builds the final spin_*() APIs.
*/
All SMP and UP architectures are converted by this patch.
arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via
crosscompilers. m32r, mips, sh, sparc, have not been tested yet, but should
be mostly fine.
From: Grant Grundler <grundler@parisc-linux.org>
Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU).
Builds 32-bit SMP kernel (not booted or tested). I did not try to build
non-SMP kernels. That should be trivial to fix up later if necessary.
I converted bit ops atomic_hash lock to raw_spinlock_t. Doing so avoids
some ugly nesting of linux/*.h and asm/*.h files. Those particular locks
are well tested and contained entirely inside arch specific code. I do NOT
expect any new issues to arise with them.
If someone does ever need to use debug/metrics with them, then they will
need to unravel this hairball between spinlocks, atomic ops, and bit ops
that exist only because parisc has exactly one atomic instruction: LDCW
(load and clear word).
From: "Luck, Tony" <tony.luck@intel.com>
ia64 fix
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjanv@infradead.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se>
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Patch to eliminate struct files_struct.file_lock spinlock on the reader side
and use rcu refcounting rcuref_xxx api for the f_count refcounter. The
updates to the fdtable are done by allocating a new fdtable structure and
setting files->fdt to point to the new structure. The fdtable structure is
protected by RCU thereby allowing lock-free lookup. For fd arrays/sets that
are vmalloced, we use keventd to free them since RCU callbacks can't sleep. A
global list of fdtable to be freed is not scalable, so we use a per-cpu list.
If keventd is already handling the current cpu's work, we use a timer to defer
queueing of that work.
Since the last publication, this patch has been re-written to avoid using
explicit memory barriers and use rcu_assign_pointer(), rcu_dereference()
premitives instead. This required that the fd information is kept in a
separate structure (fdtable) and updated atomically.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In order for the RCU to work, the file table array, sets and their sizes must
be updated atomically. Instead of ensuring this through too many memory
barriers, we put the arrays and their sizes in a separate structure. This
patch takes the first step of putting the file table elements in a separate
structure fdtable that is embedded withing files_struct. It also changes all
the users to refer to the file table using files_fdtable() macro. Subsequent
applciation of RCU becomes easier after this.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adds a set of primitives to do reference counting for objects that are looked
up without locks using RCU.
Signed-off-by: Ravikiran Thirumalai <kiran_th@gmail.com>
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes minor problem that the CPUSETS have when files in the
cpuset filesystem are read after lseek()-ed beyond the EOF.
Signed-off-by: KUROSAWA Takahiro <kurosawa@valinux.co.jp>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For architecture like ia64, the switch stack structure is fairly large
(currently 528 bytes). For context switch intensive application, we found
that significant amount of cache misses occurs in switch_to() function.
The following patch adds a hook in the schedule() function to prefetch
switch stack structure as soon as 'next' task is determined. This allows
maximum overlap in prefetch cache lines for that structure.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Race is as follows. Process A forks process B, both being part of the same
session. Then, A calls disassociate_ctty while B forks C:
A B
==== ====
fork()
copy_signal()
dissasociate_ctty() ....
attach_pid(p, PIDTYPE_SID, p->signal->session);
Now, C can have current->signal->tty pointing to a freed tty structure, as
it hasn't yet been added to the session group (to have its controlling tty
cleared on the diassociate_ctty() call).
This has shown up as an oops but could be even more serious. I haven't
tried to create a test case, but a customer has verified that the patch
below resolves the issue, which was occuring quite frequently. I'll try
and post the test case if i can.
The patch simply checks for a NULL tty *after* it has been attached to the
proper session group and clears it as necessary. Alternatively, we could
simply do the tty assignment after the the process is added to the proper
session group.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
An oversight. We don't want to carry the IO scheduler's "we hold exclusive fs
resources" hint over to the child across fork().
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes a race condition where in system used to hang or sometime
crash within minutes when kprobes are inserted on ISR routine and a task
routine.
The fix has been stress tested on i386, ia64, pp64 and on x86_64. To
reproduce the problem insert kprobes on schedule() and do_IRQ() functions
and you should see hang or system crash.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There are possible race conditions if probes are placed on routines within the
kprobes files and routines used by the kprobes. For example if you put probe
on get_kprobe() routines, the system can hang while inserting probes on any
routine such as do_fork(). Because while inserting probes on do_fork(),
register_kprobes() routine grabs the kprobes spin lock and executes
get_kprobe() routine and to handle probe of get_kprobe(), kprobes_handler()
gets executed and tries to grab kprobes spin lock, and spins forever. This
patch avoids such possible race conditions by preventing probes on routines
within the kprobes file and routines used by kprobes.
I have modified the patches as per Andi Kleen's suggestion to move kprobes
routines and other routines used by kprobes to a seperate section
.kprobes.text.
Also moved page fault and exception handlers, general protection fault to
.kprobes.text section.
These patches have been tested on i386, x86_64 and ppc64 architectures, also
compiled on ia64 and sparc64 architectures.
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces a kzalloc wrapper and converts kernel/ to use it. It
saves a little program text.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Extract common code used by ptrace_attach() and may_ptrace_attach()
into a separate function.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For a NUMA system with multiple CPUs per node, declaring a cpu-exclusive
cpuset that includes only some, but not all, of the CPUs in a node will mangle
the sched domain structures.
Signed-off-by: John Hawkes <hawkes@sgi.com>
Cc; Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now the real motivation for this cpuset mem_exclusive patch series seems
trivial.
This patch keeps a task in or under one mem_exclusive cpuset from provoking an
oom kill of a task under a non-overlapping mem_exclusive cpuset. Since only
interrupt and GFP_ATOMIC allocations are allowed to escape mem_exclusive
containment, there is little to gain from oom killing a task under a
non-overlapping mem_exclusive cpuset, as almost all kernel and user memory
allocation must come from disjoint memory nodes.
This patch enables configuring a system so that a runaway job under one
mem_exclusive cpuset cannot cause the killing of a job in another such cpuset
that might be using very high compute and memory resources for a prolonged
time.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes use of the previously underutilized cpuset flag
'mem_exclusive' to provide what amounts to another layer of memory placement
resolution. With this patch, there are now the following four layers of
memory placement available:
1) The whole system (interrupt and GFP_ATOMIC allocations can use this),
2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use),
3) The current tasks cpuset (GFP_USER allocations constrained to here), and
4) Specific node placement, using mbind and set_mempolicy.
These nest - each layer is a subset (same or within) of the previous.
Layer (2) above is new, with this patch. The call used to check whether a
zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is
extended to take a gfp_mask argument, and its logic is extended, in the case
that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset
hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if
placement is allowed. The definition of GFP_USER, which used to be identical
to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous
cpuset_gfp_hardwall_flag patch.
GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks
cpuset, so long as any node therein is not too tight on memory, but will
escape to the larger layer, if need be.
The intended use is to allow something like a batch manager to handle several
jobs, each job in its own cpuset, but using common kernel memory for caches
and such. Swapper and oom_kill activity is also constrained to Layer (2). A
task in or below one mem_exclusive cpuset should not cause swapping on nodes
in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a
task in another such cpuset. Heavy use of kernel memory for i/o caching and
such by one job should not impact the memory available to jobs in other
non-overlapping mem_exclusive cpusets.
This patch enables providing hardwall, inescapable cpusets for memory
allocations of each job, while sharing kernel memory allocations between
several jobs, in an enclosing mem_exclusive cpuset.
Like Dinakar's patch earlier to enable administering sched domains using the
cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag
that had previously done nothing much useful other than restrict what cpuset
configurations were allowed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch cleans up the error path of futex_fd() by removing duplicate
code.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
posix_timer_event() first checks that the thread (SIGEV_THREAD_ID case)
does not have PF_EXITING flag, then it calls send_sigqueue() which locks
task list. But if the thread exits in between the kernel will oops
(->sighand == NULL after __exit_sighand).
This patch moves the PF_EXITING check into the send_sigqueue(), it must be
done atomically under tasklist_lock. When send_sigqueue() detects exiting
thread it returns -1. In that case posix_timer_event will send the signal
to thread group.
Also, this patch fixes task_struct use-after-free in posix_timer_event.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch removes a redundant variable `sig' from sys_prctl().
For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG
then the value of arg2 is assigned to an int variable named sig. Then sig
is tested with valid_signal() and later used to set the value of
current->pdeath_signal .
There is no reason to use this intermediate variable since valid_signal()
takes a unsigned long argument, so it can handle being passed arg2
directly, and if the call to valid_signal is OK, then we know the value of
arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int
and thus there's no problem assigning it later to current->pdeath_signal
(which is an int).
The patch gets rid of the pointless variable `sig'.
This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my
system.
Patch has been compile tested, boot tested, and just to make damn sure I
didn't break anything I wrote a quick test app that calls
prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a
unsigned long, and it behaves as expected with and without the patch.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a problem in the accounting subsystem in the kernel can not
correctly handle files larger than 2GB. The output file containing the
process accounting data can grow very large if the system is large enough
and active enough. If the 2GB limit is reached, then the system simply
stops storing process accounting data.
Another annoying problem is that once the system reaches this 2GB limit,
then every process which exits will receive a signal, SIGXFSZ. This signal
is generated because an attempt was made to write beyond the limit for the
file descriptor. This signal makes it look like every process has exited
due to a signal, when in fact, they have not.
The solution is to add the O_LARGEFILE flag to the list of flags used to
open the accounting file. The rest of the accounting support is already
largefile safe.
The changes were tested by constructing a large file (just short of 2GB),
enabling accounting, and then running enough commands to cause the
accounting data generated to increase the size of the file to 2GB. Without
the changes, the file grows to 2GB and the last command run in the test
script appears to exit due a signal when it has not. With the changes,
things work as expected and quietly.
There are some user level changes required so that it can deal with
largefiles, but those are being handled separately.
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch simplifies the usage of do_notify_parent_cldstop(), it lessens
the source and .text size slightly, and makes the code (in my opinion) a
bit more readable.
I am sending this patch now because I'm afraid Paul will touch
do_notify_parent_cldstop() really soon, It's better to cleanup first.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
IRQ_PER_CPU is not used by all architectures. This patch introduces the
macros ARCH_HAS_IRQ_PER_CPU and CHECK_IRQ_PER_CPU() to avoid the generation
of dead code in __do_IRQ().
ARCH_HAS_IRQ_PER_CPU is defined by architectures using IRQ_PER_CPU in their
include/asm_ARCH/irq.h file.
Through grepping the tree I found the following architectures currently use
IRQ_PER_CPU:
cris, ia64, ppc, ppc64 and parisc.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With "-W -Wno-unused -Wno-sign-compare" I get the following compile warning:
CC kernel/workqueue.o
kernel/workqueue.c: In function `workqueue_cpu_callback':
kernel/workqueue.c:504: warning: ordered comparison of pointer with integer zero
On error create_workqueue_thread() returns NULL, not negative pointer, so
following trivial patch suggests itself.
Signed-off-by: Mika Kukkonen <mikukkon@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the sequence of operations performed during module loading to flush
the instruction cache before module parameters are processed. If a module
has parameters of an unusual type that cannot be handled using the standard
accessor functions param_set_xxx and param_get_xxx, it has to to provide a
set of accessor functions for this type. This requires module code to be
executed during parameter processing, which is of course only possible
after the icache has been flushed.
Signed-off-by: Thomas Koeller <thomas@koeller.dyndns.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Christoph Lameter <clameter@engr.sgi.com>
When using a time interpolator that is susceptible to jitter there's
potentially contention over a cmpxchg used to prevent time from going
backwards. This is unnecessary when the caller holds the xtime write
seqlock as all readers will be blocked from returning until the write is
complete. We can therefore allow writers to insert a new value and exit
rather than fight with CPUs who only hold a reader lock.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
