Currently, the support for beacon reception stats is only dependent on
the FW.
Add an ini so that the user can also have a control over the stats
Change-Id: I4a1e654b9d1598836378def494b37a997904d77a
CRs-Fixed: 2366473
WNI_CFG_WPS_UUID should be refactored and adopted by the mlme
component.
Move the cfg item to cfg_mlme_wps_params.h
Change-Id: I79db155ad16998e9d7a7e20c01efbcba1681d61e
CRs-Fixed: 2366599
Add the functionality changes to replace the legacy powersave
parameters corresponding to the ini values that were converged.
Remove the legacy powersave ini items.
Change-Id: I1da9af9aac4a02a16dc22a43f7f9d526e196d599
CRs-Fixed: 2364964
Add basic infra to move the following Powersave related
ini to MLME component:
CFG_ENABLE_IMPS CFG_ENABLE_PS
CFG_AUTO_PS_ENABLE_TIMER CFG_ICMP_DISABLE_PS
CFG_BMPS_MINIMUM_LI CFG_BMPS_MAXIMUM_LI
CFG_DTIM_SELECTION_DIVERSITY
This change brings in mlme_init changes, mlme_public_struct.h changes
and cfg_mlme file changes for power save parameters.
Also remove the ini CFG_ICMP_DISABLE_PS_NAME as it is not used.
Change-Id: Ifd74d276b12acc8cd9740c25ee3ca261ed7d0143
CRs-Fixed: 2356897
WLAN Latency Manager support is one of the capabilities that is sent
along with the service bits by firmware. Currently, driver is not
exposing this feature to the user space.
Create and add support for a feature flag to expose this feature to the
userspace.
Change-Id: Ica8213bdaeb32c7be01b6a71a7d8b7a32dc8611b
CRs-Fixed: 2363704
The function mlme_get_psoc_obj() is used to get the mlme_obj and
error handling is taken care inside the function if mlme_obj is
null.
Remove the error message in callers of mlme_get_psoc_obj.
Change-Id: Ie7cda790758ad21b1a0275d313a97f322a2f6fd7
CRs-Fixed: 2365042
It use default value instead of user setting when parse INI
"gNeighborScanChanList".
Change-Id: I99ccede8b68eefbfef96718fa4432c1824cdcf7f
CRs-Fixed: 2363952
Add the following WLM and RRM ini configs to MLME
cfg:
CFG_LATENCY_ENABLE
CFG_LATENCY_LEVEL
CFG_LATENCY_FLAGS_NORMAL
CFG_LATENCY_FLAGS_MOD
CFG_LATENCY_FLAGS_LOW
CFG_LATENCY_FLAGS_ULTLOW
CFG_RRM_ENABLE
CFG_RRM_MEAS_RAND_INTVL
CFG_RM_CAPABILITY
Change-Id: I714aca1e9bc6d3c330934753364d7f58d93a28d7
CRs-Fixed: 2353103
Replace legacy string in vdevmgr with ext string.
Also adds new compile CMN_VDEV_MLME_CMPT_ENABLE macro
for VDEV MLME component.
Change-Id: I40ce0c2ee4d653d2f4ce68093e8ad1b2c78bece8
CRs-Fixed: 2361525
Add the following WLAN_REG ini configs and FE_BEAMFORM
cfg items to MLME cfg:
1. WNI_CFG_11D_ENABLED
2. WNI_CFG_11H_ENABLED
3. WNI_CFG_TX_BF_CAP
4. WNI_CFG_AS_CAP
5. WNI_CFG_DISABLE_LDPC_WITH_TXBF_AP
Introduce the basic infra APIs related to these configs
from mlme.
In csr_roam_open_session, lim_populate_vht_mcs_set,
lim_sta_send_add_bss, populate_dot11f_tdls_ht_vht_cap,
populate_dot11f_vht_caps and sme_update_nss, local structure
is updated instead of mlme global structure for vht caps and
thus the mlme vht caps contains only the default values.
Fix this by updating mlme vht caps in mlme_update_vht_cap.
Change-Id: I1a948d7a44ad2bcc7f711c46b278971d7e4026e7
CRs-Fixed: 2354562
Add power items related CFG items in new file,
and store the respective inis in MLME component
Change-Id: Iac183da52495aca07c6270edeb9f383ab49c1ff5
CRs-Fixed: 2341900
The second part of LFR INIs are defined dynamically in legacy codes.
Refines these INIs and APIs based on new cfg component.
Change-Id: I89869c50952bf2fe403079299b3902fc53c11d61
CRs-Fixed: 2346784
Based on new cfg component, refactor CFG_TX_POWER_CTRL_NAME and clean
up related legacy codes.
Change-Id: I6dd317d5065c4111b71a9fe94d9b9af1f7d3d664
CRs-Fixed: 2355918
Based on new cfg component, refactor INI CFG_OVERRIDE_HT40_20_24GHZ_NAME
and remove legacy codes.
Change-Id: I5b4ed96a4930a9358bd93ee809bf5cddb2787fb4
CRs-Fixed: 2354476
Cleanup multiple HT related CFG/INI Items which are already moved to the
MLME component.
Also move gShortSlotTimeEnabled INI from HDD to MLME component
Change-Id: Ie8c19f508401d4d72990f35ea5dcc18d45f0f16b
CRs-Fixed: 2354687
Refactor ini items gSapForce11NFor11AC and gGoForce11NFor11AC
into new mlme component.
Change-Id: I85e2f7f9ae14a23c322572290b095aae0f29b0ec
CRs-Fixed: 2354940
Add the following WMM config ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_INACTIVITY_INTERVAL_NAME
2. CFG_QOS_WMM_BURST_SIZE_DEFN_NAME
3. CFG_QOS_WMM_TS_INFO_ACK_POLICY_NAME
4. CFG_QOS_ADDTS_WHEN_ACM_IS_OFF_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I149971768a7193099926e2778f093dcd073f0461
CRs-Fixed: 2327692
In mlme_get_wep_key, the key_length is got from the caller is
hardcoded to value 13. This should be updated based on the
length of the key and passed to the caller. But it is not
updated and value 13 is used to copy the key, resulting in
decrypt failure.
Also add debug logs to print wep key id and length.
Pass the key length by call by reference to update the key
length
Change-Id: Ie1e56a80db27894bf9f0426728f9fb74a014679e
CRs-Fixed: 2351182
Refactor HE cap cfg items to new mlme component using
updated cfg architecture.
Change-Id: Ib983d3fc983dfffd2eee7efd1a4e3681d26d84a6
CRs-Fixed: 2351420
1) Some CFG INI options' comment text are missing.
Add them so automation script can parse and retrieve the
correct comment text.
2) Fix some discrepancies in existing CFG INI comments.
3) Delete some INI items that are not used any more.
Change-Id: Ia2fc4fab70f78e99d14fd1f7f2b4248e6484ee32
CRs-Fixed: 2350612
Fill the cmn nss chains structure from the mlme
nss chain params structure and send to fw
Change-Id: I573b0df20be31af536107f0585e7fa825dc2b6b3
CRs-Fixed: 2349823
Store the ini and dynamic configurations in the
respective vdev's mlme priv obj.
Change-Id: Ib7a90937799a188dd729c91e7ee248d3287951c5
CRs-Fixed: 2349201
Define two different mlme priv obj structures
based upon the flag CONFIG_VDEV_SM, for the
support of dynamic nss, chains update.
Change-Id: I00f39eb82973da86233ddfc8bdcc94b6ca8a439a
CRs-Fixed: 2349200
Add prefix NSS_CHAINS to band info to remove duplicate band
info in driver, and minor code cleanup.
Change-Id: I3a8446af6b6c272cfcb19583540e2384f64e3a1a
CRs-Fixed: 2347624
Populate the ini and dynamic params from the mlme
component and store them to the respective
vdev component in mlme priv obj during vdev create.
Change-Id: Ic80526e51ba97c24b5340843fc97406a6ba4c7ef
CRs-Fixed: 2347504
Some CFG INI options' comment text are missing.
Add them so automation script can parse and retrieve the
correct comment text.
Change-Id: I4f79b075244c18490c52bc9a178d36c47db43878
CRs-Fixed: 2348307
Discrepancies between some of the CFG INI names and their comment
text were discovered during reviewing.
Fix them by making all comment text aligning with the real CFG
INI names.
Change-Id: I1bf5417ea79727da451d0d6ca1a5cd100523e49a
CRs-Fixed: 2348140
Add the following HT Caps related INI/CFG items to MLME component.
gShortPreamble, CFG_HT_AMPDU_PARAMS, CFG_EXT_HT_CAP_INFO,
CFG_HT_INFO_FIELD, gEnableAMPDUPS and gMaxAmsduNum.
Change-Id: I019961016a2f0e39c7c62066c04788d3bd3d37e7
CRs-Fixed: 2318579
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BK_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BK_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BK_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BK_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BK_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BK_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BK_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I1f8e6f0fa1ff15eda36a20ee06772c4a1ddd9ca8
CRs-Fixed: 2327690
Add the following WMM BE VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_BE_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_BE_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_BE_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_BE_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_BE_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_BE_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_BE_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: Ibaf06ba2df07a4805d31a4748809c44d143dd12e
CRs-Fixed: 2327689
Add the following WMM AC VI ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VI_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VI_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VI_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VI_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VI_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VI_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VI_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme
Change-Id: I320f49b216659937dc7f708fdbb7849ae415e249
CRs-Fixed: 2327687
Correct the configuration check to enable/disable the Tx SU
beamformee setting in 20MHz mode operation.
Change-Id: I958d5319acf98931187304f2c6fe2a9aff5991b7
CRs-Fixed: 2343849
auth_failure_timeout is updated as part of
lim_check_and_announce_join_success for p2p client with NOA.
And the default value is stored in pe_session->defaultAuthFailureTimeout
After receiving the auth resp or in case of auth failure the
auth_failure_timeout is reset to default value. But there is any other
failure and pe session is deleted then the auth_failure_timeout is
not reset. And p2p cli connection will use the wrong auth timeout.
And can result in connection delay's if GO doesn't send the auth response.
Reset the auth_failure_timeout to defalut as part of pe_delete_session.
And decrease the max value to 5000ms.
Change-Id: I374bf45279f086127ef062b83a06049c895c4675
CRs-Fixed: 2343832
There are two cfg setting parameters defined for SU Tx beamformer
and improperly updated the cfg settings hence the Tx beamformer
capability advertised as unsupported always.
Remove the redundant setting for SU Tx beamformer and update the cfg
with correct values.
Change-Id: I422179ae87ab5c561f0356bcab4585fbdc53c0bd
CRs-Fixed: 2343090
Remove legacy cfg items definitions and related macros for the
converged CFG items.
Change-Id: I12944f50d68dafe989417dda777f29a6233c97a4
CRs-Fixed: 2340856
Remove the definition of following INI & CFG Items
for VHT caps which is common for HT and HE caps.
CFG_VHT_LDPC_CODING_CAP
CFG_VHT_SHORT_GI_80MHZ
CFG_VHT_SHORT_GI_160_AND_80_PLUS_80MHZ
CFG_VHT_TXSTBC
CFG_VHT_RXSTBC
CFG_VHT_RX_MCS_MAP
CFG_VHT_TX_MCS_MAP
CFG_VHT_BASIC_MCS_SET
Change-Id: I55390c3391a0be272c609030dae232d767111fcf
CRs-Fixed: 2333183
Wireless application needs to tune parameters per AC based.
Such as VI/VO queue use the different re-transmission attempts
while other queue keeps the default value. It helps to improve
the video/audio performance in noisy environment. this change
add the ability to config re-transmission attempts of non
aggregation QOS packets.
Change-Id: I95404302463275803e3feff3038f04c900b14705
CRs-Fixed: 2323555
dot11p_mode is currently represented with a uint8_t type, despite an
appropriate enumerated type being available. Change the field's type to
the more restrictive 'enum dot11p_mode' instead of uint8_t.
Change-Id: I847ce0901297b0a3e4312e8ce4124a886320f174
CRs-Fixed: 2335575
LFR2 uses ft reassoc, whose process is different from general
connect.
1.ft reassoc, normal reassoc and assoc, all of 3 need deliver
event WLAN_VDEV_SM_EV_START to SM, but need different handler.
2.ft reassoc send vdev start when add bss, not switch channel.
Change-Id: Ieefbcf0a28867be3c8a86d9a912143857c54fe06
CRs-Fixed: 2334194
In mlme_update_vht_cap, local structure is updated instead of
mlme global structure for vht caps and thus the mlme vht caps
contains only the default values.
Fix this by updating mlme vht caps in mlme_update_vht_cap.
Change-Id: Ifa3d30ae202f1a4b6361db1a504861918f7ebf2c
CRs-Fixed: 2334955
For STA interface, add support to send VDEV_UP command to firmware when
VDEV state is transitioning to VDEV_S_UP.
Change-Id: Ic8f4e8355381d915f4c1c7f6650950d7d12d9db3
CRs-Fixed: 2333297
VHT Part3: Add the basic infra for MLME CFG items and the APIs
to be used from other components for VHT.
Change-Id: I8cd30439d7ac3de7b550aa5042353cf30e04cbda
CRs-Fixed: 2322304
Create and send user configurable ini for max number of roam preauth
retries and roam preauth no-ack timeout to the firmware.
Change-Id: I66808b33f421f56cd7c007cdde1db19c8e7ca5f9
CRs-Fixed: 2279049
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-2
Change-Id: I8f9c8286861c5a7b17d0261cad6c51b431e86f4a
CRs-Fixed: 2322302
Replace usage of the below INI Items using MLME CFG instead of HDD config.
gPreventLinkDown
gSelect5GHzMargin
gEnableMemDeepSleep
gEnableCckTxFirOverride
gEnableForceTargetAssert
gEnableLpassSupport
Change-Id: Ib89272c7898db8d0c70a60640e00ca9364a9db74
CRs-Fixed: 2327025
Add the following WMM AC VO ini configs to MLME cfg:
1. CFG_QOS_WMM_INFRA_DIR_AC_VO_NAME
2. CFG_QOS_WMM_INFRA_NOM_MSDU_SIZE_AC_VO_NAME
3. CFG_QOS_WMM_INFRA_MEAN_DATA_RATE_AC_VO_NAME
4. CFG_QOS_WMM_INFRA_MIN_PHY_RATE_AC_VO_NAME
5. CFG_QOS_WMM_INFRA_SBA_AC_VO_NAME
6. CFG_QOS_WMM_INFRA_UAPSD_VO_SRV_INTV_NAME
7. CFG_QOS_WMM_INFRA_UAPSD_VO_SUS_INTV_NAME
Introduce the basic infra APIs related to these configs
from mlme.
Change-Id: I402ff46aad528d7c4bbaa794b6fba498439f8e97
CRs-Fixed: 2327048
Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-1.
Change-Id: Ie74bfd42ed3d34cc218f20ee3f9d81dc6af02172
CRs-Fixed: 2322300
gEnableEarlyStopScan is for early stop feature. Since it’s based
on rssi only, make the default value 0 on score enabled code
base.
Change-Id: Ie0e0483359d5a7e2cc969001af03500c9e8209c6
CRs-Fixed: 2311372
Remove the legacy definitions that are related to the WEP
cfg.
Move them to mlme component
Change-Id: Ibcec8adf15123d12ad7c2eb6ed770b44a093673a
CRs-Fixed: 2324046
Add mlme cfg api functions to get EDCA parameters.
Also remove the legacy CFG item definitions.
Change-Id: I075240279e2cf3fda4424b77b7cfcf50ac9619f4
CRs-Fixed: 2316205
Add CFG items of RTT and PMF as generic items based
on converged cfg component.
Change-Id: Ic95d1e7b052259149704d9faf65ebe5f51536fdf
CRs-Fixed: 2313281
Remove the legacy macro definitions that are related to the
mlme cfg.
Move them to wlan_mlme_public_struct.h
Change-Id: I64f474512463d3ba7ac238b2efd0f4cf2e36999b
CRs-Fixed: 2317750
