Update power sequence by removing all resets during power down.
Change-Id: I88610e9c71a91a32332626bf6da88f0f64ed1c65
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
(cherry picked from commit 5cffae52eacaaf6b0698de06c11397339d904f35)
Fix p-frame count during intra-period setting for HEVC session without
layer encoding.
Change-Id: I796cac16fbb0538012f9fc97262e1877285e1803
CRs-Fixed: 2735233
Signed-off-by: Amit Shekhar <ashekhar@codeaurora.org>
Avoid adapting driver framerate to camera qbuf rate in superframe
enabled case to avoid setting incorrect hfr buffer timestamps.
Change-Id: I354e7517b9aeef7f1b01f33089b81bf7122e12e2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
In steady state, the first entry in the linked list of timestamps is
always invalid. When adding a new timestamp entry, adding the
timestamp which is a duplicate of first entry leads to duplicate
linked list nodes. To avoid this, check for validity of an entry
before inserting duplicates to the linked list.
Change-Id: I47dd8fb06b9e4eb307605df6b0e2b352a2e263fe
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Need to check against v4l2 flag instead of
hfi flag.
Change-Id: Ib15974b1cc2ee23861b47425ebe21d25ff6dc694
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Fix uninitialized access issue with a few variables.
Change-Id: Ib79186e0b837ce1d020546c8a3436745c5d50532
CRs-Fixed: 2729628
Signed-off-by: Amit Shekhar <ashekhar@codeaurora.org>
As per the recommended configuration, the max spec
for running an encode session in high quality is
1080p@30. Updating the same.
Change-Id: I649790bbf8a3c2264bfe6c36769717df2d2f2a55
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently video has multiple nodes in dtsi to support/limit
sw capabilities via sku-index. Mostly restriction comes in
terms of allowed-clock-rate. So created static entries in
platform.c to configure clocks based on plaform fuse value.
So that single vidc dtsi node is sufficient and there will
not be a probe defer/failure during bootup.
For ex. Shima supports 3 sku's.
AB - max 364.8 MHz - sku_version(1) - picked from dtsi(default sku)
AA - max 201.6 MHz - sku_version(2) - clock_data_v2
AC - max 444 MHz - sku_version(0) - clock_data_v0(no fuse)
Single vidc node - "aa00000.qcom,vidc"
Change-Id: I870f1e3a24c0cbfdd92c537d3e40c4cf5400326d
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Update min resolution support from 128x128
to 96x96 for decoder.
CRs-Fixed: 2724675
Change-Id: I230d3c5fbdc1d476a634160de30b20e207a5f315
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
qbuf ioctl acquired bufq[port].lock in one thread and flush
call acquired registeredbufs.lock in another thread. So
thread-1 is waiting for registeredbufs.lock & thread-2 is
waiting for bufq[port].lock i.e leading to deadlock. So
added change to avoid above mentioned deadlock.
Change-Id: Ie21984fdb562ca7a09f801f036f3a78429ceab94
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Currently, total buffer size across pipes is
aligned with 256. It should be per pipe usage
aligned with 256.
Change-Id: I389f2a0539bb04b9d038fe44122da70690c43466
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Video instances might still be alive at the time firmware unload
handler is called. As a result, firmware unload request is not propagated
to firmware. Add place holder to increase default delay for this request
to 1sec to wait until all instances are closed and successfully unload
firmware.
Change-Id: Id1e7455d40c1808690148046f9a839f1b79574ae
For 8K video, bse-vpp delay is 6, and one frame may
have maximum 600 slices according to h265 spec, so
need to increase max slice count to 3600 to allocate
large working buffer size for worst case.
Change-Id: Iab035b4cbe8c0121bf1e63d4f3e18c9436a16f5d
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
use num_vpp_pipes from platform_data to configure
workroute.
Change-Id: I5fea0d381402f9877fdb5d0df179bc0857016c56
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add configurations specific to shima platform as per
H/W and spec.
Eg: Codec data, performance configs, fuse etc.
Change-Id: I4918af58dcafba3aaafa5eeaaaec256f8cbdca37
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Increase the delay between reset assert and deassert to a minimum of
400us, as required for Lahaina power sequence.
Change-Id: I8fb77b0746a7cc68ad3925b2e22b402cd0ff8070
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Thumbnail sessions are considered to be non realtime
sessions. Hence ignore the thumbnail sessions load on
device while calculating the load and mark thumbnail
sessions as perf session.
Change-Id: Ifa89c2f670fa631b6805a5d796a04e07e294ca4c
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Update min resolution support from 128x128
to 96x96 for decoder
Change-Id: Ib6b09af6c00323b67a1f50887d80e59148e6cfd8
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
During msm_vidc_probe, core->platform_data will be NULL, if
there is no match with compatible string in the of_dt table.
In msm_decide_dt_node sku-index check will be by passed due
to default value(0) i.e leading to NULL ptr dereference
exception in msm_vidc_init_core_clk_ops. So added check to
avoid subsequent calls, if core->platform_data is NULL.
Change-Id: I335a2836b2e34e79dcb8743816205d23f798617d
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
With best fit configuration, the probability of getting
a mapping for video buffer increases even when the system
is fragmented.
Change-Id: I8689447ce1341fd1189b543eb9fb6a2e03edcc94
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
For 720p or lower, video hardware can run only in
a specific work mode. Fix the condition, so that
the work mode is configured as desired by firmware
CRs-Fixed: 2699234
Change-Id: I8f9ad5030e7a83075a9d2d1bfe2fc39774f4aa56
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Encoder calculate fps based on timestamp,
if fps changes and stable for 2 frames,
set to firmware to facilitate rate control.
Use closest rounding instead of floor rounding
when calculate fps.
Change-Id: Id2420729a309378107ff6f7830515fae31512ddd
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Static - Enable latency hint which indicates that the
decode session may go into low latency mode during the
session. With this configuration, video driver disables
DCVS and decode batching.
Dynamic - Enable or disable low latency control during
the session. Based on it, video driver would decide the
work mode and set the same.
Change-Id: If6e85b7adb1bbe4b4bec9e4a8671db64f240cfe8
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
VPP delay is not applicable to Thumbnail usecase. Hence buffer
counts should not include VPP delay, in thumbnail usecase.
Change-Id: Iba7d3efec48c08c160eb602d946643d620d2a36f
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
